soreuseport: Fix socket selection for SO_INCOMING_CPU.

Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work
with setsockopt(SO_REUSEPORT) since v4.6.

With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could
build a highly efficient server application.

setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener
or UDP socket, and then incoming packets processed on the CPU will
likely be distributed to the socket. Technically, a socket could
even receive packets handled on another CPU if no sockets in the
reuseport group have the same CPU receiving the flow.

The logic exists in compute_score() so that a socket will get a higher
score if it has the same CPU with the flow. However, the score gets
ignored after the blamed two commits, which introduced a faster socket
selection algorithm for SO_REUSEPORT.

This patch introduces a counter of sockets with SO_INCOMING_CPU in
a reuseport group to check if we should iterate all sockets to find
a proper one. We increment the counter when

* calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT

* enabling SO_INCOMING_CPU if the socket is in a reuseport group

Also, we decrement it when

* detaching a socket out of the group to apply SO_INCOMING_CPU to
migrated TCP requests

* disabling SO_INCOMING_CPU if the socket is in a reuseport group

When the counter reaches 0, we can get back to the O(1) selection
algorithm.

The overall changes are negligible for the non-SO_INCOMING_CPU case,
and the only notable thing is that we have to update sk_incomnig_cpu
under reuseport_lock. Otherwise, the race prevents transitioning to
the O(n) algorithm and results in the wrong socket selection.

cpu1 (setsockopt) cpu2 (listen)
+-----------------+ +-------------+

lock_sock(sk1) lock_sock(sk2)

reuseport_update_incoming_cpu(sk1, val)
.
| /* set CPU as 0 */
|- WRITE_ONCE(sk1->incoming_cpu, val)
|
| spin_lock_bh(&reuseport_lock)
| reuseport_grow(sk2, reuse)
| .
| |- more_socks_size = reuse->max_socks * 2U;
| |- if (more_socks_size > U16_MAX &&
| | reuse->num_closed_socks)
| | .
| | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL);
| | `- __reuseport_detach_closed_sock(sk1, reuse)
| | .
| | `- reuseport_put_incoming_cpu(sk1, reuse)
| | .
| | | /* Read shutdown()ed sk1's sk_incoming_cpu
| | | * without lock_sock().
| | | */
| | `- if (sk1->sk_incoming_cpu >= 0)
| | .
| | | /* decrement not-yet-incremented
| | | * count, which is never incremented.
| | | */
| | `- __reuseport_put_incoming_cpu(reuse);
| |
| `- spin_lock_bh(&reuseport_lock)
|
|- spin_lock_bh(&reuseport_lock)
|
|- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...)
|- if (!reuse)
| .
| | /* Cannot increment reuse->incoming_cpu. */
| `- goto out;
|
`- spin_unlock_bh(&reuseport_lock)

Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Kazuho Oku <kazuhooku@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

udp: Update reuse->has_conns under reuseport_lock.

When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.

However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.

For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.

cpu1 cpu2
+----+ +----+

__ip[46]_datagram_connect() reuseport_grow()
. .
|- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size)
| . |
| |- rcu_read_lock()
| |- reuse = rcu_dereference(sk->sk_reuseport_cb)
| |
| | | /* reuse->has_conns == 0 here */
| | |- more_reuse->has_conns = reuse->has_conns
| |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */
| | |
| | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
| | | more_reuse)
| `- rcu_read_unlock() `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED

Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]

For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.

1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.

2) New listen() overflows reuse->socks[] and call reuseport_grow().

3) reuse->max_socks overflows u16 with the new listener.

4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().

shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().

[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tcp: Add reuseport_migrate_sock() to select a new listener.

reuseport_migrate_sock() does the same check done in
reuseport_listen_stop_sock(). If the reuseport group is capable of
migration, reuseport_migrate_sock() selects a new listener by the child
socket hash and increments the listener's sk_refcnt beforehand. Thus, if we
fail in the migration, we have to decrement it later.

We will support migration by eBPF in the later commits.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-5-kuniyu@amazon.co.jp

tcp: Keep TCP_CLOSE sockets in the reuseport group.

When we close a listening socket, to migrate its connections to another
listener in the same reuseport group, we have to handle two kinds of child
sockets. One is that a listening socket has a reference to, and the other
is not.

The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the
accept queue of their listening socket. So we can pop them out and push
them into another listener's queue at close() or shutdown() syscalls. On
the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the
three-way handshake and not in the accept queue. Thus, we cannot access
such sockets at close() or shutdown() syscalls. Accordingly, we have to
migrate immature sockets after their listening socket has been closed.

Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV
sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At
that time, if we could select a new listener from the same reuseport group,
no connection would be aborted. However, we cannot do that because
reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to
the reuseport group from closed sockets.

This patch allows TCP_CLOSE sockets to remain in the reuseport group and
access it while any child socket references them. The point is that
reuseport_detach_sock() was called twice from inet_unhash() and
sk_destruct(). This patch replaces the first reuseport_detach_sock() with
reuseport_stop_listen_sock(), which checks if the reuseport group is
capable of migration. If capable, it decrements num_socks, moves the socket
backwards in socks[] and increments num_closed_socks. When all connections
are migrated, sk_destruct() calls reuseport_detach_sock() to remove the
socket from socks[], decrement num_closed_socks, and set NULL to
sk_reuseport_cb.

By this change, closed or shutdowned sockets can keep sk_reuseport_cb.
Consequently, calling listen() after shutdown() can cause EADDRINUSE or
EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects
such sockets not to have the reuseport group. Therefore, this patch also
loosens such validation rules so that a socket can listen again if it has a
reuseport group with num_closed_socks more than 0.

When such sockets listen again, we handle them in reuseport_resurrect(). If
there is an existing reuseport group (reuseport_add_sock() path), we move
the socket from the old group to the new one and free the old one if
necessary. If there is no existing group (reuseport_alloc() path), we
allocate a new reuseport group, detach sk from the old one, and free it if
necessary, not to break the current shutdown behaviour:

- we cannot carry over the eBPF prog of shutdowned sockets
- we cannot attach/detach an eBPF prog to/from listening sockets via
shutdowned sockets

Note that when the number of sockets gets over U16_MAX, we try to detach a
closed socket randomly to make room for the new listening socket in
reuseport_grow().

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp

tcp: Add num_closed_socks to struct sock_reuseport.

As noted in the following commit, a closed listener has to hold the
reference to the reuseport group for socket migration. This patch adds a
field (num_closed_socks) to struct sock_reuseport to manage closed sockets
within the same reuseport group. Moreover, this and the following commits
introduce some helper functions to split socks[] into two sections and keep
TCP_LISTEN and TCP_CLOSE sockets in each section. Like a double-ended
queue, we will place TCP_LISTEN sockets from the front and TCP_CLOSE
sockets from the end.

TCP_LISTEN----------> <-------TCP_CLOSE
+---+---+ --- +---+ --- +---+ --- +---+
| 0 | 1 | ... | i | ... | j | ... | k |
+---+---+ --- +---+ --- +---+ --- +---+

i = num_socks - 1
j = max_socks - num_closed_socks
k = max_socks - 1

This patch also extends reuseport_add_sock() and reuseport_grow() to
support num_closed_socks.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-3-kuniyu@amazon.co.jp

net: sock_reuseport: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Generate reuseport group ID on group creation

Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose
reuseport_lock") has introduced lazy generation of reuseport group IDs that
survive group resize.

By comparing the identifier we check if BPF reuseport program is not trying
to select a socket from a BPF map that belongs to a different reuseport
group than the one the packet is for.

Because SOCKARRAY used to be the only BPF map type that can be used with
reuseport BPF, it was possible to delay the generation of reuseport group
ID until a socket from the group was inserted into BPF map for the first
time.

Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options,
either generate the reuseport ID on map update, like SOCKARRAY does, or
allocate an ID from the start when reuseport group gets created.

This patch takes the latter approach to keep sockmap free of calls into
reuseport code. This streamlines the reuseport_id access as its lifetime
now matches the longevity of reuseport object.

The cost of this simplification, however, is that we allocate reuseport IDs
for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their
setups. With the way identifiers are currently generated, we can have at
most S32_MAX reuseport groups, which hopefully is sufficient. If we ever
get close to the limit, we can switch an u64 counter like sk_cookie.

Another change is that we now always call into SOCKARRAY logic to unlink
the socket from the map when unhashing or closing the socket. Previously we
did it only when at least one socket from the group was in a BPF map.

It is worth noting that this doesn't conflict with sockmap tear-down in
case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport
group. sockmap tear-down happens first:

prot->unhash
`- tcp_bpf_unhash
|- tcp_bpf_remove
| `- while (sk_psock_link_pop(psock))
| `- sk_psock_unlink
| `- sock_map_delete_from_link
| `- __sock_map_delete
| `- sock_map_unref
| `- sk_psock_put
| `- sk_psock_drop
| `- rcu_assign_sk_user_data(sk, NULL)
`- inet_unhash
`- reuseport_detach_sock
`- bpf_sk_reuseport_detach
`- WRITE_ONCE(sk->sk_user_data, NULL)

Suggested-by: Martin Lau <kafai@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com

udp: correct reuseport selection with connected sockets

UDP reuseport groups can hold a mix unconnected and connected sockets.
Ensure that connections only receive all traffic to their 4-tuple.

Fast reuseport returns on the first reuseport match on the assumption
that all matches are equal. Only if connections are present, return to
the previous behavior of scoring all sockets.

Record if connections are present and if so (1) treat such connected
sockets as an independent match from the group, (2) only return
2-tuple matches from reuseport and (3) do not return on the first
2-tuple reuseport match to allow for a higher scoring match later.

New field has_conns is set without locks. No other fields in the
bitmap are modified at runtime and the field is only ever set
unconditionally, so an RMW cannot miss a change.

Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Link: http://lkml.kernel.org/r/CA+FuTSfRP09aJNYRt04SS6qj22ViiOEWaWmLAwX0psk8-PGNxw@mail.gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: net: Add SO_DETACH_REUSEPORT_BPF

There is SO_ATTACH_REUSEPORT_[CE]BPF but there is no DETACH.
This patch adds SO_DETACH_REUSEPORT_BPF sockopt. The same
sockopt can be used to undo both SO_ATTACH_REUSEPORT_[CE]BPF.

reseport_detach_prog() is added and it is mostly a mirror
of the existing reuseport_attach_prog(). The differences are,
it does not call reuseport_alloc() and returns -ENOENT when
there is no old prog.

Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection

This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a
SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in
the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED
when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP.
The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to
handle this case and return NULL immediately instead of continuing the
sk search from its hashtable.

It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach
BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check
if the attaching bpf prog is in the new SK_REUSEPORT or the existing
SOCKET_FILTER type and then check different things accordingly.

One level of "__reuseport_attach_prog()" call is removed. The
"sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed
back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c
seems to have more knowledge on those test requirements than filter.c.
In "reuseport_attach_prog()", after new_prog is attached to reuse->prog,
the old_prog (if any) is also directly freed instead of returning the
old_prog to the caller and asking the caller to free.

The sysctl_optmem_max check is moved back to the
"sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()".
As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only
bounded by the usual "bpf_prog_charge_memlock()" during load time
instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT

This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select
a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other
non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN.

BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern"
to store the bpf context instead of using the skb->cb[48].

At the SO_REUSEPORT sk lookup time, it is in the middle of transiting
from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this
point, it is not always clear where the bpf context can be appended
in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting
aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not
clear if the lower layer is only ipv4 and ipv6 in the future and
will it not touch the cb[] again before transiting to the upper
layer.

For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB
instead of IP[6]CB and it may still modify the cb[] after calling
the udp[46]_lib_lookup_skb(). Because of the above reason, if
sk->cb is used for the bpf ctx, saving-and-restoring is needed
and likely the whole 48 bytes cb[] has to be saved and restored.

Instead of saving, setting and restoring the cb[], this patch opts
to create a new "struct sk_reuseport_kern" and setting the needed
values in there.

The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)"
will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol
specific usage at this point and it is also inline with the current
sock_reuseport.c implementation (i.e. no protocol specific requirement).

In "struct sk_reuseport_md", this patch exposes data/data_end/len
with semantic similar to other existing usages. Together
with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()",
the bpf prog can peek anywhere in the skb. The "bind_inany" tells
the bpf prog that the reuseport group is bind-ed to a local
INANY address which cannot be learned from skb.

The new "bind_inany" is added to "struct sock_reuseport" which will be
used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order
to avoid repeating the "bind INANY" test on
"sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can
only be properly initialized when a "sk->sk_reuseport" enabled sk is
adding to a hashtable (i.e. during "reuseport_alloc()" and
"reuseport_add_sock()").

The new "sk_select_reuseport()" is the main helper that the
bpf prog will use to select a SO_REUSEPORT sk. It is the only function
that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in
the earlier patch, the validity of a selected sk is checked in
run time in "sk_select_reuseport()". Doing the check in
verification time is difficult and inflexible (consider the map-in-map
use case). The runtime check is to compare the selected sk's reuseport_id
with the reuseport_id that we want. This helper will return -EXXX if the
selected sk cannot serve the incoming request (e.g. reuseport_id
not match). The bpf prog can decide if it wants to do SK_DROP as its
discretion.

When the bpf prog returns SK_PASS, the kernel will check if a
valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL").
If it does , it will use the selected sk. If not, the kernel
will select one from "reuse->socks[]" (as before this patch).

The SK_DROP and SK_PASS handling logic will be in the next patch.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

net: Add ID (if needed) to sock_reuseport and expose reuseport_lock

A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which
allows a SO_REUSEPORT sk to be added to a bpf map. When a sk
is removed from reuse->socks[], it also needs to be removed from
the bpf map. Also, when adding a sk to a bpf map, the bpf
map needs to ensure it is indeed in a reuse->socks[].
Hence, reuseport_lock is needed by the bpf map to ensure its
map_update_elem() and map_delete_elem() operations are in-sync with
the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only
acquire the reuseport_lock after ensuring the adding sk is already
in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem()
will be lockless.

This patch also adds an ID to sock_reuseport. A later patch
will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows
a bpf prog to select a sk from a bpf map. It is inflexible to
statically enforce a bpf map can only contain the sk belonging to
a particular reuse->socks[] (i.e. same IP:PORT) during the bpf
verification time. For example, think about the the map-in-map situation
where the inner map can be dynamically changed in runtime and the outer
map may have inner maps belonging to different reuseport groups.
Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT
type) selects a sk, this selected sk has to be checked to ensure it
belongs to the requesting reuseport group (i.e. the group serving
that IP:PORT).

The "sk->sk_reuseport_cb" pointer cannot be used for this checking
purpose because the pointer value will change after reuseport_grow().
Instead of saving all checking conditions like the ones
preced calling "reuseport_add_sock()" and compare them everytime a
bpf_prog is run, a 32bits ID is introduced to survive the
reuseport_grow(). The ID is only acquired if any of the
reuse->socks[] is added to the newly introduced
"BPF_MAP_TYPE_REUSEPORT_ARRAY" map.

If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this
patch is a no-op.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tcp: Avoid TCP syncookie rejected by SO_REUSEPORT socket

Although the actual cookie check "__cookie_v[46]_check()" does
not involve sk specific info, it checks whether the sk has recent
synq overflow event in "tcp_synq_no_recent_overflow()". The
tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second
when it has sent out a syncookie (through "tcp_synq_overflow()").

The above per sk "recent synq overflow event timestamp" works well
for non SO_REUSEPORT use case. However, it may cause random
connection request reject/discard when SO_REUSEPORT is used with
syncookie because it fails the "tcp_synq_no_recent_overflow()"
test.

When SO_REUSEPORT is used, it usually has multiple listening
socks serving TCP connection requests destinated to the same local IP:PORT.
There are cases that the TCP-ACK-COOKIE may not be received
by the same sk that sent out the syncookie. For example,
if reuse->socks[] began with {sk0, sk1},
1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp
was updated.
2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed
and then sk2 was added. Here, sk2 does not have ts_recent_stamp set.
There are other ordering that will trigger the similar situation
below but the idea is the same.
3) When the TCP-ACK-COOKIE comes back, sk2 was selected.
"tcp_synq_no_recent_overflow(sk2)" returns true. In this case,
all syncookies sent by sk1 will be handled (and rejected)
by sk2 while sk1 is still alive.

The userspace may create and remove listening SO_REUSEPORT sockets
as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle
incoming requests, old process stopping and new process starting...etc.
With or without SO_ATTACH_REUSEPORT_[CB]BPF,
the sockets leaving and joining a reuseport group makes picking
the same sk to check the syncookie very difficult (if not impossible).

The later patches will allow bpf prog more flexibility in deciding
where a sk should be located in a bpf map and selecting a particular
SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock,
replace the whole bpf reuseport_array in one map_update() by using
map-in-map. Getting the syncookie check working smoothly across
socks in the same "reuse->socks[]" is important.

A partial solution is to set the newly added sk's ts_recent_stamp
to the max ts_recent_stamp of a reuseport group but that will require
to iterate through reuse->socks[] OR
pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is
joining a reuseport group. However, neither of them will solve the
existing sk getting moved around the reuse->socks[] and that
sk may not have ts_recent_stamp updated, unlikely under continuous
synflood but not impossible.

This patch opts to treat the reuseport group as a whole when
considering the last synq overflow timestamp since
they are serving the same IP:PORT from the userspace
(and BPF program) perspective.

"synq_overflow_ts" is added to "struct sock_reuseport".
The tcp_synq_overflow() and tcp_synq_no_recent_overflow()
will update/check reuse->synq_overflow_ts if the sk is
in a reuseport group. Similar to the reuseport decision in
__inet_lookup_listener(), both sk->sk_reuseport and
sk->sk_reuseport_cb are tested for SO_REUSEPORT usage.
Update on "synq_overflow_ts" happens at roughly once
every second.

A synflood test was done with a 16 rx-queues and 16 reuseport sockets.
No meaningful performance change is observed. Before and
after the change is ~9Mpps in IPv4.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soreuseport: fix NULL ptr dereference SO_REUSEPORT after bind

Marc Dionne discovered a NULL pointer dereference when setting
SO_REUSEPORT on a socket after it is bound.
This patch removes the assumption that at least one socket in the
reuseport group is bound with the SO_REUSEPORT option before other
bind calls occur.

Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF

Expose socket options for setting a classic or extended BPF program
for use when selecting sockets in an SO_REUSEPORT group. These options
can be used on the first socket to belong to a group before bind or
on any socket in the group after bind.

This change includes refactoring of the existing sk_filter code to
allow reuse of the existing BPF filter validation checks.

Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

soreuseport: define reuseport groups

struct sock_reuseport is an optional shared structure referenced by each
socket belonging to a reuseport group. When a socket is bound to an
address/port not yet in use and the reuseport flag has been set, the
structure will be allocated and attached to the newly bound socket.
When subsequent calls to bind are made for the same address/port, the
shared structure will be updated to include the new socket and the
newly bound socket will reference the group structure.

Usually, when an incoming packet was destined for a reuseport group,
all sockets in the same group needed to be considered before a
dispatching decision was made. With this structure, an appropriate
socket can be found after looking up just one socket in the group.

This shared structure will also allow for more complicated decisions to
be made when selecting a socket (eg a BPF filter).

This work is based off a similar implementation written by
Ying Cai <ycai@google.com> for implementing policy-based reuseport
selection.

Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>