#
75eb6af7 |
|
07-Jun-2023 |
Chuck Lever <chuck.lever@oracle.com> |
SUNRPC: Add a TCP-with-TLS RPC transport class Use the new TLS handshake API to enable the SunRPC client code to request a TLS handshake. This implements support for RFC 9289, only on TCP sockets. Upper layers such as NFS use RPC-with-TLS to protect in-transit traffic. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
0d3ca07f |
|
07-Jun-2023 |
Chuck Lever <chuck.lever@oracle.com> |
SUNRPC: Ignore data_ready callbacks during TLS handshakes The RPC header parser doesn't recognize TLS handshake traffic, so it will close the connection prematurely with an error. To avoid that, shunt the transport's data_ready callback when there is a TLS handshake in progress. The XPRT_SOCK_IGNORE_RECV flag will be toggled by code added in a subsequent patch. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
421ab1be |
|
25-Mar-2022 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Do not dereference non-socket transports in sysfs Do not cast the struct xprt to a sock_xprt unless we know it is a UDP or TCP transport. Otherwise the call to lock the mutex will scribble over whatever structure is actually there. This has been seen to cause hard system lockups when the underlying transport was RDMA. Fixes: b49ea673e119 ("SUNRPC: lock against ->sock changing during sysfs read") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
2790a624 |
|
15-Mar-2022 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Replace internal use of SOCKWQ_ASYNC_NOSPACE The socket's SOCKWQ_ASYNC_NOSPACE can be cleared by various actors in the socket layer, so replace it with our own flag in the transport sock_state field. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
89f42494 |
|
16-Mar-2022 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Don't call connect() more than once on a TCP socket Avoid socket state races due to repeated calls to ->connect() using the same socket. If connect() returns 0 due to the connection having completed, but we are in fact in a closing state, then we may leave the XPRT_CONNECTING flag set on the transport. Reported-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Fixes: 3be232f11a3c ("SUNRPC: Prevent immediate close+reconnect") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
a8482488 |
|
23-Jun-2021 |
Olga Kornievskaia <kolga@netapp.com> |
SUNRPC query transport's source port Provide ability to query transport's source port. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
d05a0201 |
|
12-Nov-2019 |
Christoph Hellwig <hch@lst.de> |
sunrpc: remove __KERNEL__ ifdefs Remove the __KERNEL__ ifdefs from the non-UAPI sunrpc headers, as those can't be included from user space programs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
#
af84537d |
|
02-Oct-2019 |
Benjamin Coddington <bcodding@redhat.com> |
SUNRPC: fix race to sk_err after xs_error_report Since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context") there has been a race to the value of the sk_err if both XPRT_SOCK_WAKE_ERROR and XPRT_SOCK_WAKE_DISCONNECT are set. In that case, we may end up losing the sk_err value that existed when xs_error_report was called. Fix this by reverting to the previous behavior: instead of using SO_ERROR to retrieve the value at a later time (which might also return sk_err_soft), copy the sk_err value onto struct sock_xprt, and use that value to wake pending tasks. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Fixes: 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
#
4f8943f8 |
|
01-May-2019 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Replace direct task wakeups from softirq context Replace the direct task wakeups from inside a softirq context with wakeups from a process context. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
a73881c9 |
|
26-Feb-2019 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Fix an Oops in udp_poll() udp_poll() checks the struct file for the O_NONBLOCK flag, so we must not call it with a NULL file pointer. Fixes: 0ffe86f48026 ("SUNRPC: Use poll() to fix up the socket requeue races") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
277e4ab7 |
|
14-Sep-2018 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Simplify TCP receive code by switching to using iterators Most of this code should also be reusable with other socket types. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
6c7a64e5 |
|
13-Aug-2018 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Add socket transmit queue offset tracking Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
d1109aa5 |
|
13-Aug-2018 |
Trond Myklebust <trond.myklebust@hammerspace.com> |
SUNRPC: Rename TCP receive-specific state variables Since we will want to introduce similar TCP state variables for the transmission of requests, let's rename the existing ones to label that they are for the receive side. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
7196dbb0 |
|
08-Feb-2017 |
Trond Myklebust <trond.myklebust@primarydata.com> |
SUNRPC: Allow changing of the TCP timeout parameters on the fly When the NFSv4 server tells us the lease period, we usually want to adjust down the timeout parameters on the TCP connection to ensure that we don't miss lease renewals due to a faulty connection. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
#
42d42a5b |
|
23-May-2016 |
Trond Myklebust <trond.myklebust@primarydata.com> |
SUNRPC: Small optimisation of client receive Do not queue the client receive work if we're still processing. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
#
edc1b01c |
|
05-Oct-2015 |
Trond Myklebust <trond.myklebust@primarydata.com> |
SUNRPC: Move TCP receive data path into a workqueue context Stream protocols such as TCP can often build up a backlog of data to be read due to ordering. Combine this with the fact that some workloads such as NFS read()-intensive workloads need to receive a lot of data per RPC call, and it turns out that receiving the data from inside a softirq context can cause starvation. The following patch moves the TCP data receive into a workqueue context. We still end up calling tcp_read_sock(), but we do so from a process context, meaning that softirqs are enabled for most of the time. With this patch, I see a doubling of read bandwidth when running a multi-threaded iozone workload between a virtual client and server setup. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
#
0fdea1e8 |
|
16-Sep-2015 |
Trond Myklebust <trond.myklebust@primarydata.com> |
SUNRPC: Ensure that we wait for connections to complete before retrying Commit 718ba5b87343, moved the responsibility for unlocking the socket to xs_tcp_setup_socket, meaning that the socket will be unlocked before we know that it has finished trying to connect. The following patch is based on an initial patch by Russell King to ensure that we delay clearing the XPRT_CONNECTING flag until we either know that we failed to initiate a connection attempt, or the connection attempt itself failed. Fixes: 718ba5b87343 ("SUNRPC: Add helpers to prevent socket create from racing") Reported-by: Russell King <linux@arm.linux.org.uk> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
#
1a867a08 |
|
28-Oct-2014 |
Jeff Layton <jlayton@kernel.org> |
sunrpc: add tracepoints in xs_tcp_data_recv Add tracepoints inside the main loop on xs_tcp_data_recv that allow us to keep an eye on what's happening during each phase of it. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
#
09acfea5 |
|
11-Mar-2012 |
Trond Myklebust <Trond.Myklebust@netapp.com> |
SUNRPC: Fix a few sparse warnings net/sunrpc/svcsock.c:412:22: warning: incorrect type in assignment (different address spaces) - svc_partial_recvfrom now takes a struct kvec, so the variable save_iovbase needs to be an ordinary (void *) Make a bunch of variables in net/sunrpc/xprtsock.c static Fix a couple of "warning: symbol 'foo' was not declared. Should it be static?" reports. Fix a couple of conflicting function declarations. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
#
f300baba |
|
10-Sep-2009 |
Alexandros Batsakis <batsakis@netapp.com> |
nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
#
483066d6 |
|
24-Oct-2007 |
Adrian Bunk <bunk@kernel.org> |
SUNRPC: make sunrpc/xprtsock.c:xs_setup_{udp,tcp}() static xs_setup_{udp,tcp}() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
#
5fe4a334 |
|
22-Nov-2007 |
Adrian Bunk <bunk@kernel.org> |
[SUNRPC]: Make xprtsock.c:xs_setup_{udp,tcp}() static xs_setup_{udp,tcp}() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
#
4fa016eb |
|
10-Sep-2007 |
\"Talpey, Thomas\ <Thomas.Talpey@netapp.com> |
NFS/SUNRPC: support transport protocol naming To prepare for including non-sockets-based RPC transports, select RPC transports by an identifier (to be used in following patches). Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
#
49c36fcc |
|
10-Sep-2007 |
\"Talpey, Thomas\ <Thomas.Talpey@netapp.com> |
SUNRPC: rearrange RPC sockets definitions To prepare for including non-sockets-based RPC transports, move the sockets-dependent definitions into their own file. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|