sched/numa, mm: make numa migrate functions to take a folio

The cpupid (or access time) is stored in the head page for THP, so it is
safely to make should_numa_migrate_memory() and numa_hint_fault_latency()
to take a folio. This is in preparation for large folio numa balancing.

Link: https://lkml.kernel.org/r/20230921074417.24004-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sched/numa: Complete scanning of inactive VMAs when there is no alternative

VMAs are skipped if there is no recent fault activity but this represents
a chicken-and-egg problem as there may be no fault activity if the PTEs
are never updated to trap NUMA hints. There is an indirect reliance on
scanning to be forced early in the lifetime of a task but this may fail
to detect changes in phase behaviour. Force inactive VMAs to be scanned
when all other eligible VMAs have been updated within the same scan
sequence.

Test results in general look good with some changes in performance, both
negative and positive, depending on whether the additional scanning and
faulting was beneficial or not to the workload. The autonuma benchmark
workload NUMA01_THREADLOCAL was picked for closer examination. The workload
creates two processes with numerous threads and thread-local storage that
is zero-filled in a loop. It exercises the corner case where unrelated
threads may skip VMAs that are thread-local to another thread and still
has some VMAs that inactive while the workload executes.

The VMA skipping activity frequency with and without the patch:

6.6.0-rc2-sched-numabtrace-v1
=============================
649 reason=scan_delay
9,094 reason=unsuitable
48,915 reason=shared_ro
143,919 reason=inaccessible
193,050 reason=pid_inactive

6.6.0-rc2-sched-numabselective-v1
=============================
146 reason=seq_completed
622 reason=ignore_pid_inactive

624 reason=scan_delay
6,570 reason=unsuitable
16,101 reason=shared_ro
27,608 reason=inaccessible
41,939 reason=pid_inactive

Note that with the patch applied, the PID activity is ignored
(ignore_pid_inactive) to ensure a VMA with some activity is completely
scanned. In addition, a small number of VMAs are scanned when no other
eligible VMA is available during a single scan window (seq_completed).
The number of times a VMA is skipped due to no PID activity from the
scanning task (pid_inactive) drops dramatically. It is expected that
this will increase the number of PTEs updated for NUMA hinting faults
as well as hinting faults but these represent PTEs that would otherwise
have been missed. The tradeoff is scan+fault overhead versus improving
locality due to migration.

On a 2-socket Cascade Lake test machine, the time to complete the
workload is as follows;

6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Min elsp-NUMA01_THREADLOCAL 174.22 ( 0.00%) 117.64 ( 32.48%)
Amean elsp-NUMA01_THREADLOCAL 175.68 ( 0.00%) 123.34 * 29.79%*
Stddev elsp-NUMA01_THREADLOCAL 1.20 ( 0.00%) 4.06 (-238.20%)
CoeffVar elsp-NUMA01_THREADLOCAL 0.68 ( 0.00%) 3.29 (-381.70%)
Max elsp-NUMA01_THREADLOCAL 177.18 ( 0.00%) 128.03 ( 27.74%)

The time to complete the workload is reduced by almost 30%:

6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1 /
Duration User 91201.80 63506.64
Duration System 2015.53 1819.78
Duration Elapsed 1234.77 868.37

In this specific case, system CPU time was not increased but it's not
universally true.

From vmstat, the NUMA scanning and fault activity is as follows;

6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Ops NUMA base-page range updates 64272.00 26374386.00
Ops NUMA PTE updates 36624.00 55538.00
Ops NUMA PMD updates 54.00 51404.00
Ops NUMA hint faults 15504.00 75786.00
Ops NUMA hint local faults % 14860.00 56763.00
Ops NUMA hint local percent 95.85 74.90
Ops NUMA pages migrated 1629.00 6469222.00

Both the number of PTE updates and hint faults is dramatically
increased. While this is superficially unfortunate, it represents
ranges that were simply skipped without the patch. As a result
of the scanning and hinting faults, many more pages were also
migrated but as the time to completion is reduced, the overhead
is offset by the gain.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-7-mgorman@techsingularity.net

sched/numa: Complete scanning of partial VMAs regardless of PID activity

NUMA Balancing skips VMAs when the current task has not trapped a NUMA
fault within the VMA. If the VMA is skipped then mm->numa_scan_offset
advances and a task that is trapping faults within the VMA may never
fully update PTEs within the VMA.

Force tasks to update PTEs for partially scanned PTEs. The VMA will
be tagged for NUMA hints by some task but this removes some of the
benefit of tracking PID activity within a VMA. A follow-on patch
will mitigate this problem.

The test cases and machines evaluated did not trigger the corner case so
the performance results are neutral with only small changes within the
noise from normal test-to-test variance. However, the next patch makes
the corner case easier to trigger.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-6-mgorman@techsingularity.net

sched/numa: Trace decisions related to skipping VMAs

NUMA balancing skips or scans VMAs for a variety of reasons. In preparation
for completing scans of VMAs regardless of PID access, trace the reasons
why a VMA was skipped. In a later patch, the tracing will be used to track
if a VMA was forcibly scanned.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-4-mgorman@techsingularity.net

sched/fair: Don't free p->numa_faults with concurrent readers

When going through execve(), zero out the NUMA fault statistics instead of
freeing them.

During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.

Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/headers: Move the NUMA balancing interfaces from <linux/sched.h> to <linux/sched/numa_balancing.h>

Split out the interface between the scheduler and the MM which
deals with page fault driven NUMA balancing, into the new
<linux/sched/numa_balancing.h> header.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/numa_balancing.h>

We are going to split <linux/sched/numa_balancing.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/numa_balancing.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>