#
eab0af90 |
|
25-Jan-2024 |
Kent Overstreet <kent.overstreet@linux.dev> |
mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN Introduce PF_MEMALLOC_* equivalents of some GFP_ flags: PF_MEMALLOC_NORECLAIM -> GFP_NOWAIT PF_MEMALLOC_NOWARN -> __GFP_NOWARN Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: linux-mm@kvack.org Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
#
3f6d5e6a |
|
25-Jan-2024 |
Kent Overstreet <kent.overstreet@linux.dev> |
mm: introduce memalloc_flags_{save,restore} Our proliferation of memalloc_*_{save,restore} APIs is getting a bit silly, this adds a generic version and converts the existing save/restore functions to wrappers. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: linux-mm@kvack.org Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
#
cfb837e8 |
|
12-Feb-2024 |
Vlastimil Babka <vbabka@suse.cz> |
mm: document memalloc_noreclaim_save() and memalloc_pin_save() The memalloc_noreclaim_save() function currently has no documentation comment, so the implications of its usage are not obvious. Namely that it not only prevents entering reclaim (as the name suggests), but also allows using all memory reserves and thus should be only used in contexts that are allocating memory to free memory. This may lead to new improper usages being added. Thus add a documenting comment, based on the description of __GFP_MEMALLOC. While at it, also document memalloc_pin_save() so that all the memalloc_ scopes are documented. For those already documented, add missing Return: descriptions, and mark Context: description per kernel-docs style guide. In the comments describing the relevant PF_MEMALLOC flags, refer to their scope setting functions. [vbabka@suse.cz: fix issues that Mike pointed out] Link: https://lkml.kernel.org/r/20240215095827.13756-2-vbabka@suse.cz Link: https://lkml.kernel.org/r/20240212182950.32730-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
e86828e5 |
|
19-Oct-2023 |
Roman Gushchin <roman.gushchin@linux.dev> |
mm: kmem: scoped objcg protection Switch to a scope-based protection of the objcg pointer on slab/kmem allocation paths. Instead of using the get_() semantics in the pre-allocation hook and put the reference afterwards, let's rely on the fact that objcg is pinned by the scope. It's possible because: 1) if the objcg is received from the current task struct, the task is keeping a reference to the objcg. 2) if the objcg is received from an active memcg (remote charging), the memcg is pinned by the scope and has a reference to the corresponding objcg. Link: https://lkml.kernel.org/r/20231019225346.1822282-5-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
cd389115 |
|
22-Mar-2023 |
Jacob Pan <jacob.jun.pan@linux.intel.com> |
iommu/sva: Move PASID helpers to sva code Preparing to remove IOASID infrastructure, PASID management will be under SVA code. Decouple mm code from IOASID. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20230322200803.869130-3-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
#
223baf9d |
|
20-Apr-2023 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
sched: Fix performance regression introduced by mm_cid Introduce per-mm/cpu current concurrency id (mm_cid) to fix a PostgreSQL sysbench regression reported by Aaron Lu. Keep track of the currently allocated mm_cid for each mm/cpu rather than freeing them immediately on context switch. This eliminates most atomic operations when context switching back and forth between threads belonging to different memory spaces in multi-threaded scenarios (many processes, each with many threads). The per-mm/per-cpu mm_cid values are serialized by their respective runqueue locks. Thread migration is handled by introducing invocation to sched_mm_cid_migrate_to() (with destination runqueue lock held) in activate_task() for migrating tasks. If the destination cpu's mm_cid is unset, and if the source runqueue is not actively using its mm_cid, then the source cpu's mm_cid is moved to the destination cpu on migration. Introduce a task-work executed periodically, similarly to NUMA work, which delays reclaim of cid values when they are unused for a period of time. Keep track of the allocation time for each per-cpu cid, and let the task work clear them when they are observed to be older than SCHED_MM_CID_PERIOD_NS and unused. This task work also clears all mm_cids which are greater or equal to the Hamming weight of the mm cidmask to keep concurrency ids compact. Because we want to ensure the mm_cid converges towards the smaller values as migrations happen, the prior optimization that was done when context switching between threads belonging to the same mm is removed, because it could delay the lazy release of the destination runqueue mm_cid after it has been replaced by a migration. Removing this prior optimization is not an issue performance-wise because the introduced per-mm/per-cpu mm_cid tracking also covers this more specific case. Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID") Reported-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Aaron Lu <aaron.lu@intel.com> Link: https://lore.kernel.org/lkml/20230327080502.GA570847@ziqianlu-desk2/
|
#
88e3009b |
|
03-Feb-2023 |
Nicholas Piggin <npiggin@gmail.com> |
lazy tlb: allow lazy tlb mm refcounting to be configurable Add CONFIG_MMU_TLB_REFCOUNT which enables refcounting of the lazy tlb mm when it is context switched. This can be disabled by architectures that don't require this refcounting if they clean up lazy tlb mms when the last refcount is dropped. Currently this is always enabled, so the patch introduces no functional change. Link: https://lkml.kernel.org/r/20230203071837.1136453-4-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
aa464ba9 |
|
03-Feb-2023 |
Nicholas Piggin <npiggin@gmail.com> |
lazy tlb: introduce lazy tlb mm refcount helper functions Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting. This makes the lazy tlb mm references more obvious, and allows the refcounting scheme to be modified in later changes. There is no functional change with this patch. Link: https://lkml.kernel.org/r/20230203071837.1136453-3-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
400b9b93 |
|
12-Mar-2023 |
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
iommu/sva: Replace pasid_valid() helper with mm_valid_pasid() Kernel has few users of pasid_valid() and all but one checks if the process has PASID allocated. The helper takes ioasid_t as the input. Replace the helper with mm_valid_pasid() that takes mm_struct as the argument. The only call that checks PASID that is not tied to mm_struct is open-codded now. This is preparatory patch. It helps avoid ifdeffery: no need to dereference mm->pasid in generic code to check if the process has PASID. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/20230312112612.31869-11-kirill.shutemov%40linux.intel.com
|
#
ee65728e |
|
27-Jun-2022 |
Mike Rapoport <rppt@kernel.org> |
docs: rename Documentation/vm to Documentation/mm so it will be consistent with code mm directory and with Documentation/admin-guide/mm and won't be confused with virtual machines. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Tested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Wu XiangCheng <bobwxc@email.cn>
|
#
2cb4de08 |
|
09-Apr-2022 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
mm: Add len and flags parameters to arch_get_mmap_end() Powerpc needs flags and len to make decision on arch_get_mmap_end(). So add them as parameters to arch_get_mmap_end(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b556daabe7d2bdb2361c4d6130280da7c1ba2c14.1649523076.git.christophe.leroy@csgroup.eu
|
#
4b439e25 |
|
09-Apr-2022 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
mm, hugetlbfs: Allow an arch to always use generic versions of get_unmapped_area functions Unlike most architectures, powerpc can only define at runtime if it is going to use the generic arch_get_unmapped_area() or not. Today, powerpc has a copy of the generic arch_get_unmapped_area() because when selection HAVE_ARCH_UNMAPPED_AREA the generic arch_get_unmapped_area() is not available. Rename it generic_get_unmapped_area() and make it independent of HAVE_ARCH_UNMAPPED_AREA. Do the same for arch_get_unmapped_area_topdown() versus HAVE_ARCH_UNMAPPED_AREA_TOPDOWN. Do the same for hugetlb_get_unmapped_area() versus HAVE_ARCH_HUGETLB_UNMAPPED_AREA. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/77f9d3e592f1c8511df9381aa1c4e754651da4d1.1649523076.git.christophe.leroy@csgroup.eu
|
#
5f24d5a5 |
|
21-Apr-2022 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
mm, hugetlb: allow for "high" userspace addresses This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053dac8 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053dac8. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053dac8 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
701fac40 |
|
07-Feb-2022 |
Fenghua Yu <fenghua.yu@intel.com> |
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit PASIDs are process-wide. It was attempted to use refcounted PASIDs to free them when the last thread drops the refcount. This turned out to be complex and error prone. Given the fact that the PASID space is 20 bits, which allows up to 1M processes to have a PASID associated concurrently, PASID resource exhaustion is not a realistic concern. Therefore, it was decided to simplify the approach and stick with lazy on demand PASID allocation, but drop the eager free approach and make an allocated PASID's lifetime bound to the lifetime of the process. Get rid of the refcounting mechanisms and replace/rename the interfaces to reflect this new approach. [ bp: Massage commit message. ] Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220207230254.3342514-6-fenghua.yu@intel.com
|
#
a6cbd440 |
|
07-Feb-2022 |
Fenghua Yu <fenghua.yu@intel.com> |
kernel/fork: Initialize mm's PASID A new mm doesn't have a PASID yet when it's created. Initialize the mm's PASID on fork() or for init_mm to INVALID_IOASID (-1). INIT_PASID (0) is reserved for kernel legacy DMA PASID. It cannot be allocated to a user process. Initializing the process's PASID to 0 may cause confusion that's why the process uses the reserved kernel legacy DMA PASID. Initializing the PASID to INVALID_IOASID (-1) explicitly tells the process doesn't have a valid PASID yet. Even though the only user of mm_pasid_init() is in fork.c, define it in <linux/sched/mm.h> as the first of three mm/pasid life cycle functions (init/set/drop) to keep these all together. Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220207230254.3342514-5-fenghua.yu@intel.com
|
#
4034247a |
|
14-Jan-2022 |
NeilBrown <neilb@suse.de> |
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8d491de6 |
|
28-Sep-2021 |
Thomas Gleixner <tglx@linutronix.de> |
sched: Move mmdrop to RCU on RT mmdrop() is invoked from finish_task_switch() by the incoming task to drop the mm which was handed over by the previous task. mmdrop() can be quite expensive which prevents an incoming real-time task from getting useful work done. Provide mmdrop_sched() which maps to mmdrop() on !RT kernels. On RT kernels it delagates the eventually required invocation of __mmdrop() to RCU. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210928122411.648582026@linutronix.de
|
#
55a68c82 |
|
02-Sep-2021 |
Vasily Averin <vvs@virtuozzo.com> |
memcg: replace in_interrupt() by !in_task() in active_memcg() set_active_memcg() uses in_interrupt() check to select proper storage for cgroup: pointer on task struct or per-cpu pointer. It isn't fully correct: obsoleted in_interrupt() includes tasks with disabled BH. It's better to use '!in_task()' instead. Link: https://lkml.org/lkml/2021/7/26/487 Link: https://lkml.kernel.org/r/ed4448b0-4970-616f-7368-ef9dd3cb628d@virtuozzo.com Fixes: 37d5985c003d ("mm: kmem: prepare remote memcg charging infra for interrupt contexts") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
4f3eaf45 |
|
02-Sep-2021 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
mm: report a more useful address for reclaim acquisition A recent lockdep report included these lines: [ 96.177910] 3 locks held by containerd/770: [ 96.177934] #0: ffff88810815ea28 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x115/0x770 [ 96.177999] #1: ffffffff82915020 (rcu_read_lock){....}-{1:2}, at: get_swap_device+0x33/0x140 [ 96.178057] #2: ffffffff82955ba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 While it was not useful to that bug report to know where the reclaim lock had been acquired, it might be useful under other circumstances. Allow the caller of __fs_reclaim_acquire to specify the instruction pointer to use. Link: https://lkml.kernel.org/r/20210719185709.1755149-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8e3560d9 |
|
04-May-2021 |
Pavel Tatashin <pasha.tatashin@soleen.com> |
mm: honor PF_MEMALLOC_PIN for all movable pages PF_MEMALLOC_PIN is only honored for CMA pages, extend this flag to work for any allocations from ZONE_MOVABLE by removing __GFP_MOVABLE from gfp_mask when this flag is passed in the current context. Add is_pinnable_page() to return true if page is in a pinnable page. A pinnable page is not in ZONE_MOVABLE and not of MIGRATE_CMA type. Link: https://lkml.kernel.org/r/20210215161349.246722-8-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1a08ae36 |
|
04-May-2021 |
Pavel Tatashin <pasha.tatashin@soleen.com> |
mm cma: rename PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN PF_MEMALLOC_NOCMA is used ot guarantee that the allocator will not return pages that might belong to CMA region. This is currently used for long term gup to make sure that such pins are not going to be done on any CMA pages. When PF_MEMALLOC_NOCMA has been introduced we haven't realized that it is focusing on CMA pages too much and that there is larger class of pages that need the same treatment. MOVABLE zone cannot contain any long term pins as well so it makes sense to reuse and redefine this flag for that usecase as well. Rename the flag to PF_MEMALLOC_PIN which defines an allocation context which can only get pages suitable for long-term pins. Also rename: memalloc_nocma_save()/memalloc_nocma_restore to memalloc_pin_save()/memalloc_pin_restore() and make the new functions common. [rppt@linux.ibm.com: fix renaming of PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN] Link: https://lkml.kernel.org/r/20210331163816.11517-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210215161349.246722-6-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
149fc787 |
|
12-Mar-2021 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
include/linux/sched/mm.h: use rcu_dereference in in_vfork() Fix a sparse warning by using rcu_dereference(). Technically this is a bug and a sufficiently aggressive compiler could reload the `real_parent' pointer outside the protection of the rcu lock (and access freed memory), but I think it's pretty unlikely to happen. Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
95d6c701 |
|
14-Dec-2020 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
mm: extract might_alloc() debug check Extracted from slab.h, which seems to have the most complete version including the correct might_sleep() check. Roll it out to slob.c. Motivated by a discussion with Paul about possibly changing call_rcu behaviour to allocate memory, but only roughly every 500th call. There are a lot fewer places in the kernel that care about whether allocating memory is allowed or not (due to deadlocks with reclaim code) than places that care whether sleeping is allowed. But debugging these also tends to be a lot harder, so nice descriptive checks could come in handy. I might have some use eventually for annotations in drivers/gpu. Note that unlike fs_reclaim_acquire/release gfpflags_allow_blocking does not consult the PF_MEMALLOC flags. But there is no flag equivalent for GFP_NOWAIT, hence this check can't go wrong due to memalloc_no*_save/restore contexts. Willy is working on a patch series which might change this: https://lore.kernel.org/linux-mm/20200625113122.7540-7-willy@infradead.org/ I think best would be if that updates gfpflags_allow_blocking(), since there's a ton of callers all over the place for that already. Link: https://lkml.kernel.org/r/20201125162532.1299794-3-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Waiman Long <longman@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Qian Cai <cai@lca.pw> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Christian König <christian.koenig@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström (Intel) <thomas_os@shipmail.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
5bc78502 |
|
20-Oct-2020 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
sched: fix exit_mm vs membarrier (v4) exit_mm should issue memory barriers after user-space memory accesses, before clearing current->mm, to order user-space memory accesses performed prior to exit_mm before clearing tsk->mm, which has the effect of skipping the membarrier private expedited IPIs. exit_mm should also update the runqueue's membarrier_state so membarrier global expedited IPIs are not sent when they are not needed. The membarrier system call can be issued concurrently with do_exit if we have thread groups created with CLONE_VM but not CLONE_THREAD. Here is the scenario I have in mind: Two thread groups are created, A and B. Thread group B is created by issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD. Let's assume we have a single thread within each thread group (Thread A and Thread B). The AFAIU we can have: Userspace variables: int x = 0, y = 0; CPU 0 CPU 1 Thread A Thread B (in thread group A) (in thread group B) x = 1 barrier() y = 1 exit() exit_mm() current->mm = NULL; r1 = load y membarrier() skips CPU 0 (no IPI) because its current mm is NULL r2 = load x BUG_ON(r1 == 1 && r2 == 0) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201020134715.13909-2-mathieu.desnoyers@efficios.com
|
#
37d5985c |
|
17-Oct-2020 |
Roman Gushchin <guro@fb.com> |
mm: kmem: prepare remote memcg charging infra for interrupt contexts Remote memcg charging API uses current->active_memcg to store the currently active memory cgroup, which overwrites the memory cgroup of the current process. It works well for normal contexts, but doesn't work for interrupt contexts: indeed, if an interrupt occurs during the execution of a section with an active memcg set, all allocations inside the interrupt will be charged to the active memcg set (given that we'll enable accounting for allocations from an interrupt context). But because the interrupt might have no relation to the active memcg set outside, it's obviously wrong from the accounting prospective. To resolve this problem, let's add a global percpu int_active_memcg variable, which will be used to store an active memory cgroup which will be used from interrupt contexts. set_active_memcg() will transparently use current->active_memcg or int_active_memcg depending on the context. To make the read part simple and transparent for the caller, let's introduce two new functions: - struct mem_cgroup *active_memcg(void), - struct mem_cgroup *get_active_memcg(void). They are returning the active memcg if it's set, hiding all implementation details: where to get it depending on the current context. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200827225843.1270629-4-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b87d8cef |
|
17-Oct-2020 |
Roman Gushchin <guro@fb.com> |
mm, memcg: rework remote charging API to support nesting Currently the remote memcg charging API consists of two functions: memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the memcg value, which overwrites the memcg of the current task. memalloc_use_memcg(target_memcg); <...> memalloc_unuse_memcg(); It works perfectly for allocations performed from a normal context, however an attempt to call it from an interrupt context or just nest two remote charging blocks will lead to an incorrect accounting. On exit from the inner block the active memcg will be cleared instead of being restored. memalloc_use_memcg(target_memcg); memalloc_use_memcg(target_memcg_2); <...> memalloc_unuse_memcg(); Error: allocation here are charged to the memcg of the current process instead of target_memcg. memalloc_unuse_memcg(); This patch extends the remote charging API by switching to a single function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg), which sets the new value and returns the old one. So a remote charging block will look like: old_memcg = set_active_memcg(target_memcg); <...> set_active_memcg(old_memcg); This patch is heavily based on the patch by Johannes Weiner, which can be found here: https://lkml.org/lkml/2020/5/28/806 . Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Schatzberg <dschatzberg@fb.com> Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
4d45e75a |
|
15-Oct-2020 |
Jann Horn <jannh@google.com> |
mm: remove the now-unnecessary mmget_still_valid() hack The preceding patches have ensured that core dumping properly takes the mmap_lock. Thanks to that, we can now remove mmget_still_valid() and all its users. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-8-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2a36ab717 |
|
23-Sep-2020 |
Peter Oskolkov <posk@google.com> |
rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ This patchset is based on Google-internal RSEQ work done by Paul Turner and Andrew Hunter. When working with per-CPU RSEQ-based memory allocations, it is sometimes important to make sure that a global memory location is no longer accessed from RSEQ critical sections. For example, there can be two per-CPU lists, one is "active" and accessed per-CPU, while another one is inactive and worked on asynchronously "off CPU" (e.g. garbage collection is performed). Then at some point the two lists are swapped, and a fast RCU-like mechanism is required to make sure that the previously active list is no longer accessed. This patch introduces such a mechanism: in short, membarrier() syscall issues an IPI to a CPU, restarting a potentially active RSEQ critical section on the CPU. Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lkml.kernel.org/r/20200923233618.2572849-1-posk@google.com
|
#
af161bee |
|
11-Aug-2020 |
Waiman Long <longman@redhat.com> |
include/linux/sched/mm.h: optimize current_gfp_context() The current_gfp_context() converts a number of PF_MEMALLOC_* per-process flags into the corresponding GFP_* flags for memory allocation. In that function, current->flags is accessed 3 times. That may lead to duplicated access of the same memory location. This is not usually a problem with minimal debug config options on as the compiler can optimize away the duplicated memory accesses. With most of the debug config options on, however, that may not be the case. For example, the x86-64 object size of the __need_fs_reclaim() in a debug kernel that calls current_gfp_context() was 309 bytes. With this patch applied, the object size is reduced to 202 bytes. This is a saving of 107 bytes and will probably be slightly faster too. Use READ_ONCE() to access current->flags to prevent the compiler from possibly accessing current->flags multiple times. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/20200618212936.9776-1-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8510e69c |
|
07-Aug-2020 |
Joonsoo Kim <iamjoonsoo.kim@lge.com> |
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs Currently, memalloc_nocma_{save/restore} API that prevents CMA area in page allocation is implemented by using current_gfp_context(). However, there are two problems of this implementation. First, this doesn't work for allocation fastpath. In the fastpath, original gfp_mask is used since current_gfp_context() is introduced in order to control reclaim and it is on slowpath. So, CMA area can be allocated through the allocation fastpath even if memalloc_nocma_{save/restore} APIs are used. Currently, there is just one user for these APIs and it has a fallback method to prevent actual problem. Second, clearing __GFP_MOVABLE in current_gfp_context() has a side effect to exclude the memory on the ZONE_MOVABLE for allocation target. To fix these problems, this patch changes the implementation to exclude CMA area in page allocation. Main point of this change is using the alloc_flags. alloc_flags is mainly used to control allocation so it fits for excluding CMA area in allocation. Fixes: d7fefcc8de91 (mm/cma: add PF flag to force non cma alloc) Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Link: http://lkml.kernel.org/r/1595468942-29687-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e0078e2e |
|
15-Jul-2020 |
Randy Dunlap <rdunlap@infradead.org> |
linux/sched/mm.h: drop duplicated words in comments Drop doubled words "to" and "that". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/927ea8d8-3f6c-9b65-4c2b-63ab4bd59ef1@infradead.org
|
#
01e377c5 |
|
18-Jun-2020 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
sched/core: Remove mmdrop() definition Commit bf2c59fce4074 ("sched/core: Fix illegal RCU from offline CPUs") introduced a definition for mmdrop() but a a few lines above there is already mmdrop() defined as static inline. Remove the newly introduced mmdrop() definition. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200618190810.790211-1-bigeasy@linutronix.de
|
#
c1e8d7c6 |
|
08-Jun-2020 |
Michel Lespinasse <walken@google.com> |
mmap locking API: convert mmap_sem comments Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
bf2c59fc |
|
01-Apr-2020 |
Peter Zijlstra <peterz@infradead.org> |
sched/core: Fix illegal RCU from offline CPUs In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
|
#
4610ba7a |
|
06-Nov-2019 |
Thomas Gleixner <tglx@linutronix.de> |
exit/exec: Seperate mm_release() mm_release() contains the futex exit handling. mm_release() is called from do_exit()->exit_mm() and from exec()->exec_mm(). In the exit_mm() case PF_EXITING and the futex state is updated. In the exec_mm() case these states are not touched. As the futex exit code needs further protections against exit races, this needs to be split into two functions. Preparatory only, no functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de
|
#
227a4aad |
|
19-Sep-2019 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
sched/membarrier: Fix p->mm->membarrier_state racy load The membarrier_state field is located within the mm_struct, which is not guaranteed to exist when used from runqueue-lock-free iteration on runqueues by the membarrier system call. Copy the membarrier_state from the mm_struct into the scheduler runqueue when the scheduler switches between mm. When registering membarrier for mm, after setting the registration bit in the mm membarrier state, issue a synchronize_rcu() to ensure the scheduler observes the change. In order to take care of the case where a runqueue keeps executing the target mm without swapping to other mm, iterate over each runqueue and issue an IPI to copy the membarrier_state from the mm_struct into each runqueue which have the same mm which state has just been modified. Move the mm membarrier_state field closer to pgd in mm_struct to use a cache line already touched by the scheduler switch_mm. The membarrier_execve() (now membarrier_exec_mmap) hook now needs to clear the runqueue's membarrier state in addition to clear the mm membarrier state, so move its implementation into the scheduler membarrier code so it can access the runqueue structure. Add memory barrier in membarrier_exec_mmap() prior to clearing the membarrier state, ensuring memory accesses executed prior to exec are not reordered with the stores clearing the membarrier state. As suggested by Linus, move all membarrier.c RCU read-side locks outside of the for each cpu loops. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
2840cf02 |
|
19-Sep-2019 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
sched/membarrier: Call sync_core only before usermode for same mm When the prev and next task's mm change, switch_mm() provides the core serializing guarantees before returning to usermode. The only case where an explicit core serialization is needed is when the scheduler keeps the same mm for prev and next. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
59ea6d06 |
|
13-Jun-2019 |
Andrea Arcangeli <aarcange@redhat.com> |
coredump: fix race condition between collapse_huge_page() and core dumping When fixing the race conditions between the coredump and the mmap_sem holders outside the context of the process, we focused on mmget_not_zero()/get_task_mm() callers in 04f5866e41fb70 ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping"), but those aren't the only cases where the mmap_sem can be taken outside of the context of the process as Michal Hocko noticed while backporting that commit to older -stable kernels. If mmgrab() is called in the context of the process, but then the mm_count reference is transferred outside the context of the process, that can also be a problem if the mmap_sem has to be taken for writing through that mm_count reference. khugepaged registration calls mmgrab() in the context of the process, but the mmap_sem for writing is taken later in the context of the khugepaged kernel thread. collapse_huge_page() after taking the mmap_sem for writing doesn't modify any vma, so it's not obvious that it could cause a problem to the coredump, but it happens to modify the pmd in a way that breaks an invariant that pmd_trans_huge_lock() relies upon. collapse_huge_page() needs the mmap_sem for writing just to block concurrent page faults that call pmd_trans_huge_lock(). Specifically the invariant that "!pmd_trans_huge()" cannot become a "pmd_trans_huge()" doesn't hold while collapse_huge_page() runs. The coredump will call __get_user_pages() without mmap_sem for reading, which eventually can invoke a lockless page fault which will need a functional pmd_trans_huge_lock(). So collapse_huge_page() needs to use mmget_still_valid() to check it's not running concurrently with the coredump... as long as the coredump can invoke page faults without holding the mmap_sem for reading. This has "Fixes: khugepaged" to facilitate backporting, but in my view it's more a bug in the coredump code that will eventually have to be rewritten to stop invoking page faults without the mmap_sem for reading. So the long term plan is still to drop all mmget_still_valid(). Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com Fixes: ba76149f47d8 ("thp: khugepaged") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
04f5866e |
|
18-Apr-2019 |
Andrea Arcangeli <aarcange@redhat.com> |
coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping The core dumping code has always run without holding the mmap_sem for writing, despite that is the only way to ensure that the entire vma layout will not change from under it. Only using some signal serialization on the processes belonging to the mm is not nearly enough. This was pointed out earlier. For example in Hugh's post from Jul 2017: https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils "Not strictly relevant here, but a related note: I was very surprised to discover, only quite recently, how handle_mm_fault() may be called without down_read(mmap_sem) - when core dumping. That seems a misguided optimization to me, which would also be nice to correct" In particular because the growsdown and growsup can move the vm_start/vm_end the various loops the core dump does around the vma will not be consistent if page faults can happen concurrently. Pretty much all users calling mmget_not_zero()/get_task_mm() and then taking the mmap_sem had the potential to introduce unexpected side effects in the core dumping code. Adding mmap_sem for writing around the ->core_dump invocation is a viable long term fix, but it requires removing all copy user and page faults and to replace them with get_dump_page() for all binary formats which is not suitable as a short term fix. For the time being this solution manually covers the places that can confuse the core dump either by altering the vma layout or the vma flags while it runs. Once ->core_dump runs under mmap_sem for writing the function mmget_still_valid() can be dropped. Allowing mmap_sem protected sections to run in parallel with the coredump provides some minor parallelism advantage to the swapoff code (which seems to be safe enough by never mangling any vma field and can keep doing swapins in parallel to the core dumping) and to some other corner case. In order to facilitate the backporting I added "Fixes: 86039bd3b4e6" however the side effect of this same race condition in /proc/pid/mem should be reproducible since before 2.6.12-rc2 so I couldn't add any other "Fixes:" because there's no hash beyond the git genesis commit. Because find_extend_vma() is the only location outside of the process context that could modify the "mm" structures under mmap_sem for reading, by adding the mmget_still_valid() check to it, all other cases that take the mmap_sem for reading don't need the new check after mmget_not_zero()/get_task_mm(). The expand_stack() in page fault context also doesn't need the new check, because all tasks under core dumping are frozen. Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Jann Horn <jannh@google.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jann Horn <jannh@google.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d7fefcc8 |
|
05-Mar-2019 |
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> |
mm/cma: add PF flag to force non cma alloc Patch series "mm/kvm/vfio/ppc64: Migrate compound pages out of CMA region", v8. ppc64 uses the CMA area for the allocation of guest page table (hash page table). We won't be able to start guest if we fail to allocate hash page table. We have observed hash table allocation failure because we failed to migrate pages out of CMA region because they were pinned. This happen when we are using VFIO. VFIO on ppc64 pins the entire guest RAM. If the guest RAM pages get allocated out of CMA region, we won't be able to migrate those pages. The pages are also pinned for the lifetime of the guest. Currently we support migration of non-compound pages. With THP and with the addition of hugetlb migration we can end up allocating compound pages from CMA region. This patch series add support for migrating compound pages. This patch (of 4): Add PF_MEMALLOC_NOCMA which make sure any allocation in that context is marked non-movable and hence cannot be satisfied by CMA region. This is useful with get_user_pages_longterm where we want to take a page pin by migrating pages from CMA region. Marking the section PF_MEMALLOC_NOCMA ensures that we avoid unnecessary page migration later. Link: http://lkml.kernel.org/r/20190114095438.32470-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
dfcb245e |
|
03-Dec-2018 |
Ingo Molnar <mingo@kernel.org> |
sched: Fix various typos in comments Go over the scheduler source code and fix common typos in comments - and a typo in an actual variable name. No change in functionality intended. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
d46eb14b |
|
17-Aug-2018 |
Shakeel Butt <shakeelb@google.com> |
fs: fsnotify: account fsnotify metadata to kmemcg Patch series "Directed kmem charging", v8. The Linux kernel's memory cgroup allows limiting the memory usage of the jobs running on the system to provide isolation between the jobs. All the kernel memory allocated in the context of the job and marked with __GFP_ACCOUNT will also be included in the memory usage and be limited by the job's limit. The kernel memory can only be charged to the memcg of the process in whose context kernel memory was allocated. However there are cases where the allocated kernel memory should be charged to the memcg different from the current processes's memcg. This patch series contains two such concrete use-cases i.e. fsnotify and buffer_head. The fsnotify event objects can consume a lot of system memory for large or unlimited queues if there is either no or slow listener. The events are allocated in the context of the event producer. However they should be charged to the event consumer. Similarly the buffer_head objects can be allocated in a memcg different from the memcg of the page for which buffer_head objects are being allocated. To solve this issue, this patch series introduces mechanism to charge kernel memory to a given memcg. In case of fsnotify events, the memcg of the consumer can be used for charging and for buffer_head, the memcg of the page can be charged. For directed charging, the caller can use the scope API memalloc_[un]use_memcg() to specify the memcg to charge for all the __GFP_ACCOUNT allocations within the scope. This patch (of 2): A lot of memory can be consumed by the events generated for the huge or unlimited queues if there is either no or slow listener. This can cause system level memory pressure or OOMs. So, it's better to account the fsnotify kmem caches to the memcg of the listener. However the listener can be in a different memcg than the memcg of the producer and these allocations happen in the context of the event producer. This patch introduces remote memcg charging API which the producer can use to charge the allocations to the memcg of the listener. There are seven fsnotify kmem caches and among them allocations from dnotify_struct_cache, dnotify_mark_cache, fanotify_mark_cache and inotify_inode_mark_cachep happens in the context of syscall from the listener. So, SLAB_ACCOUNT is enough for these caches. The objects from fsnotify_mark_connector_cachep are not accounted as they are small compared to the notification mark or events and it is unclear whom to account connector to since it is shared by all events attached to the inode. The allocations from the event caches happen in the context of the event producer. For such caches we will need to remote charge the allocations to the listener's memcg. Thus we save the memcg reference in the fsnotify_group structure of the listener. This patch has also moved the members of fsnotify_group to keep the size same, at least for 64 bit build, even with additional member by filling the holes. [shakeelb@google.com: use GFP_KERNEL_ACCOUNT rather than open-coding it] Link: http://lkml.kernel.org/r/20180702215439.211597-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
93781325 |
|
07-Jun-2018 |
Omar Sandoval <osandov@fb.com> |
lockdep: fix fs_reclaim annotation While revisiting my Btrfs swapfile series [1], I introduced a situation in which reclaim would lock i_rwsem, and even though the swapon() path clearly made GFP_KERNEL allocations while holding i_rwsem, I got no complaints from lockdep. It turns out that the rework of the fs_reclaim annotation was broken: if the current task has PF_MEMALLOC set, we don't acquire the dummy fs_reclaim lock, but when reclaiming we always check this _after_ we've just set the PF_MEMALLOC flag. In most cases, we can fix this by moving the fs_reclaim_{acquire,release}() outside of the memalloc_noreclaim_{save,restore}(), althought kswapd is slightly different. After applying this, I got the expected lockdep splats. 1: https://lwn.net/Articles/625412/ Link: http://lkml.kernel.org/r/9f8aa70652a98e98d7c4de0fc96a4addcee13efe.1523778026.git.osandov@fb.com Fixes: d92a8cfcb37e ("locking/lockdep: Rework FS_RECLAIM annotation") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
46ca3599 |
|
29-May-2018 |
Michal Hocko <mhocko@suse.com> |
doc: document scope NOFS, NOIO APIs Although the api is documented in the source code Ted has pointed out that there is no mention in the core-api Documentation and there are people looking there to find answers how to use a specific API. Requested-by: "Theodore Y. Ts'o" <tytso@mit.edu> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
#
ad56b738 |
|
21-Mar-2018 |
Mike Rapoport <rppt@linux.vnet.ibm.com> |
docs/vm: rename documentation files to .rst Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
#
8f2af155 |
|
10-Apr-2018 |
Kees Cook <keescook@chromium.org> |
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d34bc48f |
|
21-Feb-2018 |
Andrew Morton <akpm@linux-foundation.org> |
include/linux/sched/mm.h: re-inline mmdrop() As Peter points out, Doing a CALL+RET for just the decrement is a bit silly. Fixes: d70f2a14b72a4bc ("include/linux/sched/mm.h: uninline mmdrop_async(), etc") Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
70216e18 |
|
29-Jan-2018 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
membarrier: Provide core serializing command, *_SYNC_CORE Provide core serializing membarrier command to support memory reclaim by JIT. Each architecture needs to explicitly opt into that support by documenting in their architecture code how they provide the core serializing instructions required when returning from the membarrier IPI, and after the scheduler has updated the curr->mm pointer (before going back to user-space). They should then select ARCH_HAS_MEMBARRIER_SYNC_CORE to enable support for that command on their architecture. Architectures selecting this feature need to either document that they issue core serializing instructions when returning to user-space, or implement their architecture-specific sync_core_before_usermode(). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-9-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
c5f58bd5 |
|
29-Jan-2018 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
membarrier: Provide GLOBAL_EXPEDITED command Allow expedited membarrier to be used for data shared between processes through shared memory. Processes wishing to receive the membarriers register with MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED. Those which want to issue membarrier invoke MEMBARRIER_CMD_GLOBAL_EXPEDITED. This allows extremely simple kernel-level implementation: we have almost everything we need with the PRIVATE_EXPEDITED barrier code. All we need to do is to add a flag in the mm_struct that will be used to check whether we need to send the IPI to the current thread of each CPU. There is a slight downside to this approach compared to targeting specific shared memory users: when performing a membarrier operation, all registered "global" receivers will get the barrier, even if they don't share a memory mapping with the sender issuing MEMBARRIER_CMD_GLOBAL_EXPEDITED. This registration approach seems to fit the requirement of not disturbing processes that really deeply care about real-time: they simply should not register with MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED. In order to align the membarrier command names, the "MEMBARRIER_CMD_SHARED" command is renamed to "MEMBARRIER_CMD_GLOBAL", keeping an alias of MEMBARRIER_CMD_SHARED to MEMBARRIER_CMD_GLOBAL for UAPI header backward compatibility. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-5-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
306e0604 |
|
29-Jan-2018 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
membarrier: Document scheduler barrier requirements Document the membarrier requirement on having a full memory barrier in __schedule() after coming from user-space, before storing to rq->curr. It is provided by smp_mb__after_spinlock() in __schedule(). Document that membarrier requires a full barrier on transition from kernel thread to userspace thread. We currently have an implicit barrier from atomic_dec_and_test() in mmdrop() that ensures this. The x86 switch_mm_irqs_off() full barrier is currently provided by many cpumask update operations as well as write_cr3(). Document that write_cr3() provides this barrier. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-4-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
3ccfebed |
|
29-Jan-2018 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
powerpc, membarrier: Skip memory barrier in switch_mm() Allow PowerPC to skip the full memory barrier in switch_mm(), and only issue the barrier when scheduling into a task belonging to a process that has registered to use expedited private. Threads targeting the same VM but which belong to different thread groups is a tricky case. It has a few consequences: It turns out that we cannot rely on get_nr_threads(p) to count the number of threads using a VM. We can use (atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1) instead to skip the synchronize_sched() for cases where the VM only has a single user, and that user only has a single thread. It also turns out that we cannot use for_each_thread() to set thread flags in all threads using a VM, as it only iterates on the thread group. Therefore, test the membarrier state variable directly rather than relying on thread flags. This means membarrier_register_private_expedited() needs to set the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag, issue synchronize_sched(), and only then set MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY which allows private expedited membarrier commands to succeed. membarrier_arch_switch_mm() now tests for the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129202020.8515-3-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
d70f2a14 |
|
31-Jan-2018 |
Andrew Morton <akpm@linux-foundation.org> |
include/linux/sched/mm.h: uninline mmdrop_async(), etc mmdrop_async() is only used in fork.c. Move that and its support functions into fork.c, uninline it all. Quite a lot of code gets moved around to avoid forward declarations. Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
a961e409 |
|
19-Oct-2017 |
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
membarrier: Provide register expedited private command This introduces a "register private expedited" membarrier command which allows eventual removal of important memory barrier constraints on the scheduler fast-paths. It changes how the "private expedited" membarrier command (new to 4.14) is used from user-space. This new command allows processes to register their intent to use the private expedited command. This affects how the expedited private command introduced in 4.14-rc is meant to be used, and should be merged before 4.14 final. Processes are now required to register before using MEMBARRIER_CMD_PRIVATE_EXPEDITED, otherwise that command returns EPERM. This fixes a problem that arose when designing requested extensions to sys_membarrier() to allow JITs to efficiently flush old code from instruction caches. Several potential algorithms are much less painful if the user register intent to use this functionality early on, for example, before the process spawns the second thread. Registering at this time removes the need to interrupt each and every thread in that process at the first expedited sys_membarrier() system call. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a1b2289c |
|
03-Oct-2017 |
Sherry Yang <sherryy@android.com> |
android: binder: drop lru lock in isolate callback Drop the global lru lock in isolate callback before calling zap_page_range which calls cond_resched, and re-acquire the global lru lock before returning. Also change return code to LRU_REMOVED_RETRY. Use mmput_async when fail to acquire mmap sem in an atomic context. Fix "BUG: sleeping function called from invalid context" errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. Also restore mmput_async, which was initially introduced in commit ec8d7c14ea14 ("mm, oom_reaper: do not mmput synchronously from the oom reaper context"), and was removed in commit 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently"). Link: http://lkml.kernel.org/r/20170914182231.90908-1-sherryy@android.com Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder") Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Kyle Yan <kyan@codeaurora.org> Acked-by: Arve Hjønnevåg <arve@android.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Martijn Coenen <maco@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Riley Andrews <riandrews@android.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Christopher Lameter <cl@linux.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
21292580 |
|
06-Sep-2017 |
Andrea Arcangeli <aarcange@redhat.com> |
mm: oom: let oom_reap_task and exit_mmap run concurrently This is purely required because exit_aio() may block and exit_mmap() may never start, if the oom_reap_task cannot start running on a mm with mm_users == 0. At the same time if the OOM reaper doesn't wait at all for the memory of the current OOM candidate to be freed by exit_mmap->unmap_vmas, it would generate a spurious OOM kill. If it wasn't because of the exit_aio or similar blocking functions in the last mmput, it would be enough to change the oom_reap_task() in the case it finds mm_users == 0, to wait for a timeout or to wait for __mmput to set MMF_OOM_SKIP itself, but it's not just exit_mmap the problem here so the concurrency of exit_mmap and oom_reap_task is apparently warranted. It's a non standard runtime, exit_mmap() runs without mmap_sem, and oom_reap_task runs with the mmap_sem for reading as usual (kind of MADV_DONTNEED). The race between the two is solved with a combination of tsk_is_oom_victim() (serialized by task_lock) and MMF_OOM_SKIP (serialized by a dummy down_write/up_write cycle on the same lines of the ksm_exit method). If the oom_reap_task() may be running concurrently during exit_mmap, exit_mmap will wait it to finish in down_write (before taking down mm structures that would make the oom_reap_task fail with use after free). If exit_mmap comes first, oom_reap_task() will skip the mm if MMF_OOM_SKIP is already set and in turn all memory is already freed and furthermore the mm data structures may already have been taken down by free_pgtables. [aarcange@redhat.com: incremental one liner] Link: http://lkml.kernel.org/r/20170726164319.GC29716@redhat.com [rientjes@google.com: remove unused mmput_async] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1708141733130.50317@chino.kir.corp.google.com [aarcange@redhat.com: microoptimization] Link: http://lkml.kernel.org/r/20170817171240.GB5066@redhat.com Link: http://lkml.kernel.org/r/20170726162912.GA29716@redhat.com Fixes: 26db62f179d1 ("oom: keep mm of the killed task available") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: David Rientjes <rientjes@google.com> Tested-by: David Rientjes <rientjes@google.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d92a8cfc |
|
03-Mar-2017 |
Peter Zijlstra <peterz@infradead.org> |
locking/lockdep: Rework FS_RECLAIM annotation A while ago someone, and I cannot find the email just now, asked if we could not implement the RECLAIM_FS inversion stuff with a 'fake' lock like we use for other things like workqueues etc. I think this should be possible which allows reducing the 'irq' states and will reduce the amount of __bfs() lookups we do. Removing the 1 IRQ state results in 4 less __bfs() walks per dependency, improving lockdep performance. And by moving this annotation out of the lockdep code it becomes easier for the mm people to extend. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: boqun.feng@gmail.com Cc: iamjoonsoo.kim@lge.com Cc: kernel-team@lge.com Cc: kirill@shutemov.name Cc: npiggin@gmail.com Cc: walken@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
499118e9 |
|
08-May-2017 |
Vlastimil Babka <vbabka@suse.cz> |
mm: introduce memalloc_noreclaim_{save,restore} The previous patch ("mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC") has shown that simply setting and clearing PF_MEMALLOC in current->flags can result in wrongly clearing a pre-existing PF_MEMALLOC flag and potentially lead to recursive reclaim. Let's introduce helpers that support proper nesting by saving the previous stat of the flag, similar to the existing memalloc_noio_* and memalloc_nofs_* helpers. Convert existing setting/clearing of PF_MEMALLOC within mm to the new helpers. There are no known issues with the converted code, but the change makes it more robust. Link: http://lkml.kernel.org/r/20170405074700.29871-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7dea19f9 |
|
03-May-2017 |
Michal Hocko <mhocko@suse.com> |
mm: introduce memalloc_nofs_{save,restore} API GFP_NOFS context is used for the following 5 reasons currently: - to prevent from deadlocks when the lock held by the allocation context would be needed during the memory reclaim - to prevent from stack overflows during the reclaim because the allocation is performed from a deep context already - to prevent lockups when the allocation context depends on other reclaimers to make a forward progress indirectly - just in case because this would be safe from the fs POV - silence lockdep false positives Unfortunately overuse of this allocation context brings some problems to the MM. Memory reclaim is much weaker (especially during heavy FS metadata workloads), OOM killer cannot be invoked because the MM layer doesn't have enough information about how much memory is freeable by the FS layer. In many cases it is far from clear why the weaker context is even used and so it might be used unnecessarily. We would like to get rid of those as much as possible. One way to do that is to use the flag in scopes rather than isolated cases. Such a scope is declared when really necessary, tracked per task and all the allocation requests from within the context will simply inherit the GFP_NOFS semantic. Not only this is easier to understand and maintain because there are much less problematic contexts than specific allocation requests, this also helps code paths where FS layer interacts with other layers (e.g. crypto, security modules, MM etc...) and there is no easy way to convey the allocation context between the layers. Introduce memalloc_nofs_{save,restore} API to control the scope of GFP_NOFS allocation context. This is basically copying memalloc_noio_{save,restore} API we have for other restricted allocation context GFP_NOIO. The PF_MEMALLOC_NOFS flag already exists and it is just an alias for PF_FSTRANS which has been xfs specific until recently. There are no more PF_FSTRANS users anymore so let's just drop it. PF_MEMALLOC_NOFS is now checked in the MM layer and drops __GFP_FS implicitly same as PF_MEMALLOC_NOIO drops __GFP_IO. memalloc_noio_flags is renamed to current_gfp_context because it now cares about both PF_MEMALLOC_NOFS and PF_MEMALLOC_NOIO contexts. Xfs code paths preserve their semantic. kmem_flags_convert() doesn't need to evaluate the flag anymore. This patch shouldn't introduce any functional changes. Let's hope that filesystems will drop direct GFP_NOFS (resp. ~__GFP_FS) usage as much as possible and only use a properly documented memalloc_nofs_{save,restore} checkpoints where they are appropriate. [akpm@linux-foundation.org: fix comment typo, reflow comment] Link: http://lkml.kernel.org/r/20170306131408.9828-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <clm@fb.com> Cc: David Sterba <dsterba@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Brian Foster <bfoster@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b8d6d80b |
|
08-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Remove <linux/sched.h> from <linux/sched/mm.h> The <linux/sched/mm.h> file is a self-contained header and users of it either don't need <linux/sched.h> - or have already included it. Include kernel.h and atomic.h. This reduces the size of the header dependency graph. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
74444eda |
|
02-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Move the memalloc_noio_*() APIs to <linux/sched/mm.h> In preparation to remove the <linux/gfp.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
d026ce79 |
|
01-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Move in_vfork() from <linux/sched.h> to <linux/sched/mm.h> The in_vfork() function deals with task->mm, so it better belongs into <linux/sched/mm.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
4240c8bf |
|
01-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Move more mm_struct related functionality from <linux/sched.h> to <linux/sched/mm.h> Neither the mmap_layout nor the mm_update_next_owner() methods need to be in <linux/sched.h> - move them to the more appropriate <linux/sched/mm.h> header. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
68e21be2 |
|
01-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Move task->mm handling methods to <linux/sched/mm.h> Move the following task->mm helper APIs into a new header file, <linux/sched/mm.h>, to further reduce the size and complexity of <linux/sched.h>. Here are how the APIs are used in various kernel files: # mm_alloc(): arch/arm/mach-rpc/ecard.c fs/exec.c include/linux/sched/mm.h kernel/fork.c # __mmdrop(): arch/arc/include/asm/mmu_context.h include/linux/sched/mm.h kernel/fork.c # mmdrop(): arch/arm/mach-rpc/ecard.c arch/m68k/sun3/mmu_emu.c arch/x86/mm/tlb.c drivers/gpu/drm/amd/amdkfd/kfd_process.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/hw/hfi1/file_ops.c drivers/vfio/vfio_iommu_spapr_tce.c fs/exec.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/mmu_notifier.h include/linux/sched/mm.h kernel/fork.c kernel/futex.c kernel/sched/core.c mm/khugepaged.c mm/ksm.c mm/mmu_context.c mm/mmu_notifier.c mm/oom_kill.c virt/kvm/kvm_main.c # mmdrop_async_fn(): include/linux/sched/mm.h # mmdrop_async(): include/linux/sched/mm.h kernel/fork.c # mmget_not_zero(): fs/userfaultfd.c include/linux/sched/mm.h mm/oom_kill.c # mmput(): arch/arc/include/asm/mmu_context.h arch/arc/kernel/troubleshoot.c arch/frv/mm/mmu-context.c arch/powerpc/platforms/cell/spufs/context.c arch/sparc/include/asm/mmu_context_32.h drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/core/uverbs_main.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/exec.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/events/uprobes.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/oom_kill.c mm/process_vm_access.c mm/rmap.c mm/swapfile.c mm/util.c virt/kvm/async_pf.c # mmput_async(): include/linux/sched/mm.h kernel/fork.c mm/oom_kill.c # get_task_mm(): arch/arc/kernel/troubleshoot.c arch/powerpc/platforms/cell/spufs/context.c drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/util.c # mm_access(): fs/proc/base.c include/linux/sched/mm.h kernel/fork.c mm/process_vm_access.c # mm_release(): arch/arc/include/asm/mmu_context.h fs/exec.c include/linux/sched/mm.h include/uapi/linux/sched.h kernel/exit.c kernel/fork.c Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
589ee628 |
|
03-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare to remove the <linux/mm_types.h> dependency from <linux/sched.h> Update code that relied on sched.h including various MM types for them. This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
fd771233 |
|
02-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare to remove the <linux/gfp.h> include from <linux/sched.h> <linux/topology.h> is still needed - also update other headers and .c files that depend on sched.h including gfp.h (and its sub-headers) for them. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
6e84f315 |
|
08-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/mm.h> We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/mm.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|