#
968118fc |
|
12-Sep-2023 |
Linus Walleij <linus.walleij@linaro.org> |
OMAP/gpio: drop MPUIO static base The OMAP GPIO driver hardcodes the MPIO chip base, but there is no point: we have already moved all consumers over to using descriptor look-ups. Drop the MPUIO GPIO base and use dynamic assignment. Root out the unused instances of the OMAP_MPUIO() macro and delete the unused OMAP_GPIO_IS_MPUIO() macro. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
#
ddd8d94c |
|
17-Apr-2021 |
Tony Lindgren <tony@atomide.com> |
gpio: omap: Save and restore sysconfig As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
#
18bd49c4 |
|
10-Jun-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
gpio: omap: constify register tables We must never alter the register tables; these are read-only as far as the driver is concerned. Constify these tables. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
1a59d1b8 |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
e6818d29 |
|
08-Apr-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup The GPIO block can enter idle independently of the CPU power management calls via smart-idle. When the GPIO block enters idle, level detection stops working due to clocks being shut off, and an alternative form of edge detection is used. However, this needs the edge detection registers set to mark the appropriate edges. Arrange to configure the edge detection enables along with the level detection to ensure that any transition to active interrupt state that occurs while the block is idle is detected as a wake-up event. Since we enable the edge detection when configuring the IRQ, both omap2_gpio_enable_level_quirk() nor omap2_gpio_disable_level_quirk() become redundant, which also means OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER can be removed. This can be now done without regressions as patch "gpio: gpio-omap: fix level interrupt idling" allows level interrupts to idle on omap4 without a workaround. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: update description for the fix dependency] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
b764a586 |
|
20-Sep-2018 |
Tony Lindgren <tony@atomide.com> |
gpio: omap: Remove custom PM calls and use cpu_pm instead For a long time the gpio-omap custom PM calls have been annoying me so let's replace them with cpu_pm instead. This will enable GPIO PM for deeper idle states on omap4. And we can handle GPIO PM for omap2/3/4 in the same way. Note that with this patch we are also slightly changing GPIO PM to be less aggressive for omap3 and only will idle GPIO when PER context may be lost. For omap2, we don't need to save context and don't want to remove any triggering so let's add a quirk flag for that. Let's do this all in a single patch to avoid a situation where old custom calls still are used with new code. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
ec0daae6 |
|
20-Sep-2018 |
Tony Lindgren <tony@atomide.com> |
gpio: omap: Add level wakeup handling for omap4 based SoCs I noticed that unlike omap2 and 3 based SoCs, omap4 based SoCs keep the GPIO clocks enabled for GPIO level interrupts with wakeup enabled. This blocks deeper idle states as the whole domain will stay busy. The GPIO functional clock seems to stay enabled if the wakeup register is enabled and a level interrupt is triggered. In that case the only way to have the GPIO module idle is to reset it. It is possible this has gone unnoticed with OSWR (Open SWitch Retention) and off mode during idle resetting GPIO context most GPIO instances in the earlier Android trees for example. Looks like the way to deal with this is to have omap4 based SoCs only set wake for the duration of idle for level interrupts, and clear level registers for the idle. With level interrupts we can do this as the level interrupt from device will be still there on resume. I've taken the long path to fixing this to avoid yet more hard to read code. I've set up a quirks flag, and a struct for function pointers so we can use these to clean up other quirk handling easier in the later patches. The current level quirk handling is moved to the new functions. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
26683316 |
|
10-Sep-2018 |
Janusz Krzysztofik <jmkrzyszt@gmail.com> |
ARM: OMAP1: ams-delta-fiq: Use <linux/platform_data/gpio-omap.h> Instead of defining symbols already defined in linux/platform_data/gpio-omap.h, use that header file. Since we include the header into an assembler code, prevent C only bits from being read in. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
a0e37da2 |
|
12-Feb-2018 |
Suman Anna <s-anna@ti.com> |
ARM: OMAP2+: Cleanup omap_gpio_dev_attr usage The omap_gpio_dev_attr data was used to supply instance-specific data for legacy non-DT devices. The GPIO legacy device support has been cleaned up in commit 14944934f8ac ("ARM: OMAP2+: Remove legacy gpio code") a while ago and this data is therefore no longer needed. So, cleanup the structure and all the associated data in various hwmod data files. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
cac089f9 |
|
23-Apr-2015 |
Tony Lindgren <tony@atomide.com> |
gpio: omap: Allow building as a loadable module We currently get all kinds of errors building the omap gpio driver as a module starting with: undefined reference to `omap2_gpio_resume_after_idle' undefined reference to `omap2_gpio_prepare_for_idle' ... Let's fix the issue by adding inline functions to the header. Note that we can now also remove the two unused functions for omap_set_gpio_debounce and omap_set_gpio_debounce_time. Then doing rmmod on the module produces further warnings because of missing exit related functions. Let's add those. And finally, we can make the Kconfig entry just a tristate option that's selected for omaps. Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@linaro.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
873e6980 |
|
31-Oct-2012 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP: Remove NEED_MACH_GPIO_H Omap no longer needs this option, mach/gpio.h is empty. Also remove mach/irqs.h from gpio-omap.h and include it directly from the related omap1 gpio init files. Otherwise omap2+ build fails for MULTI_PLATFORM. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
4b25408f |
|
30-Aug-2012 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP: Move gpio.h to include/linux/platform_data This way we can remove includes of plat/gpio.h which won't work with the single zImage support. Note that we also remove the cpu_class_is_omap2() check in gpio-omap.c as the drivers should not call it as we need to make it local to arch/arm/mach-omap2 for single zImage support. While at it, arrange the related includes in the standard way. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mtd@lists.infradead.org Cc: alsa-devel@alsa-project.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
|