#
312b8f79 |
|
04-Jan-2023 |
Mark Zhang <markzhang@nvidia.com> |
RDMA/mlx: Calling qp event handler in workqueue context Move the call of qp event handler from atomic to workqueue context, so that the handler is able to block. This is needed by following patches. Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://lore.kernel.org/r/0cd17b8331e445f03942f4bb28d447f24ac5669d.1672821186.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
#
f8f185e3 |
|
18-Feb-2023 |
Kees Cook <keescook@chromium.org> |
net/mlx4_en: Introduce flexible array to silence overflow warning The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY memcpy() warning on ppc64 platform: In function ‘fortify_memcpy_chk’, inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2, inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4, inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3: ./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 513 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Same behaviour on x86 you can get if you use "__always_inline" instead of "inline" for skb_copy_from_linear_data() in skbuff.h The call here copies data into inlined tx destricptor, which has 104 bytes (MAX_INLINE) space for data payload. In this case "spc" is known in compile-time but the destination is used with hidden knowledge (real structure of destination is different from that the compiler can see). That cause the fortify warning because compiler can check bounds, but the real bounds are different. "spc" can't be bigger than 64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined tx descriptor. The fact that "inl" points into inlined tx descriptor is determined earlier in mlx4_en_xmit(). Avoid confusing the compiler with "inl + 1" constructions to get to past the inl header by introducing a flexible array "data" to the struct so that the compiler can see that we are not dealing with an array of inl structs, but rather, arbitrary data following the structure. There are no changes to the structure layout reported by pahole, and the resulting machine code is actually smaller. Reported-by: Josef Oskera <joskera@redhat.com> Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time") Cc: Yishai Hadas <yishaih@nvidia.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20230218183842.never.954-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
e7bb7ece |
|
07-May-2020 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
IB/mlx4: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
6dc06c08 |
|
04-Jun-2017 |
Talat Batheesh <talatb@mellanox.com> |
net/mlx4: Fix the check in attaching steering rules Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7c3d21c8 |
|
21-Sep-2016 |
Moshe Shemesh <moshe@mellanox.com> |
net/mlx4_core: Preparation for VF vlan protocol 802.1ad Check device capability to support VF vlan protocol 802.1ad mode. Add vport attribute vlan protocol. Init vport vlan protocol by default to 802.1Q. Add update QP support for VF vlan protocol 802.1ad. Add func capability vlan_offload_disable to disable all vlan HW acceleration on VF while the VF is set to VF vlan protocol 802.1ad mode. No change in VF vlan protocol 802.1Q (VST) mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
224e92e0 |
|
19-Jul-2016 |
Brenden Blanco <bblanco@plumgrid.com> |
net/mlx4_en: break out tx_desc write into separate function In preparation for writing the tx descriptor from multiple functions, create a helper for both normal and blueflame access. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3b5daf28 |
|
14-Jan-2016 |
Moni Shoua <monis@mellanox.com> |
IB/mlx4: Support modify_qp for RoCE v2 In order to support modify_qp for RoCE v2, we need to set the gid_type in the QP context. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
|
#
3f723f42 |
|
14-Jan-2016 |
Moni Shoua <monis@mellanox.com> |
net/mlx4_core: Add support for RoCE v2 entropy In RoCE v2 we need to choose a source UDP port, we do so by using entropy over the source and dest QPNs. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
|
#
9a892835 |
|
15-Oct-2015 |
Maor Gottlieb <maorg@mellanox.com> |
net/mlx4_core: Add support for filtering multicast loopback Update device capabilities regarding HW filtering multicast loopback support. Add MLX4_UPDATE_QP_ETH_SRC_CHECK_MC_LB attribute to mlx4_update_qp to enable changing QP context to support filtering incoming multicast loopback traffic according the sender's counter index. Set the corresponding bits in QP context to force the loopback source checks if attribute is given and HW supports it. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
|
#
e38af4fa |
|
27-Jul-2015 |
Hadar Hen Zion <hadarh@mellanox.com> |
net/mlx4_en: Add support for hardware accelerated 802.1ad vlan To enable device support in accelerated 802.1ad vlan, the port capability "packet has vlan enable" (phv_en) should be set. Firmware won't work properly, in case phv_en is not set. The user can enable "phv_en" port capability with the new ethtool private flag phv-bit. The phv-bit private flag default value is OFF, users who are interested in 802.1ad hardware acceleration should turn ON the phv-bit private flag: $ ethtool --set-priv-flags eth1 phv-bit on Once the private flag is set, the device is ready for 802.1ad vlan acceleration. The user should also change the interface device features and turn on "tx-vlan-stag-hw-insert" which is off by default: $ ethtool -K eth1 tx-vlan-stag-hw-insert on "phv-bit" private flag setting is available only for Physical Functions(PF), the Virtual Function (VF) will be able to use the feature by setting "tx-vlan-stag-hw-insert" ethtool device feature only if the feature was enabled by the Hypervisor. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e802f8e4 |
|
27-Jul-2015 |
Hadar Hen Zion <hadarh@mellanox.com> |
net/mlx4: Prepare VLAN macros for 802.1ad Hardware accelerated support To add Hardware accelerated support in 802.1ad vlan, replace Current VLAN macros to CVLAN. Replace: MLX4_WQE_CTRL_INS_VLAN MLX4_CQE_VLAN_PRESENT_MASK With: MLX4_WQE_CTRL_INS_CVLAN MLX4_CQE_CVLAN_PRESENT_MASK Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
08068cd5 |
|
02-Apr-2015 |
Ido Shamay <idos@mellanox.com> |
net/mlx4: Added qos_vport QP configuration in VST mode Granular QoS per VF feature introduce a new QP field, qos_vport. PF administrator can connect VF QPs to a certain QoS Vport, to inherit its proporties. Connecting QPs to the default QoS Vport (defined as 0) is always allowed, even when there are no allocated VPPs. At this point, only the default vport is connected to QPs. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fc31e256 |
|
18-Mar-2015 |
Or Gerlitz <ogerlitz@mellanox.com> |
net/mlx4_core: Add basic support for QP max-rate limiting Add the low-level device commands and definitions used for QP max-rate limiting. This is done through the following elements: - read rate-limit device caps in QUERY_DEV_CAP: number of different rates and the min/max rates in Kbs/Mbs/Gbs units - enhance the QP context struct to contain rate limit units and value - allow to do run time rate-limit setting to QPs through the update-qp firmware command - QP rate-limiting is disallowed for VFs Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f5956faf |
|
02-Mar-2015 |
Or Gerlitz <ogerlitz@mellanox.com> |
net/mlx4_core: Fix wrong mask and error flow for the update-qp command The bit mask for currently supported driver features (MLX4_UPDATE_QP_SUPPORTED_ATTRS) of the update-qp command was defined twice (using enum value and pre-processor define directive) and wrong. The return value of the call to mlx4_update_qp() from within the SRIOV resource-tracker was wrongly voided down. Fix both issues. issue: none Fixes: 09e05c3f78e9 ('net/mlx4: Set vlan stripping policy by the right command') Fixes: ce8d9e0d6746 ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
59e14e32 |
|
03-Feb-2015 |
Moni Shoua <monis@mellanox.com> |
net/mlx4_core: Port aggregation low level interface Implement the hardware interface required for port aggregation. 1. Disable RX port check on receive - don't perform a validity check that matches to QP's port and the port where the packet is received. 2. Virtual to physical port remap - configure virtual to physical port mapping. Port remap capability for virtual functions. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b9d1ab7e |
|
16-Nov-2014 |
Eric Dumazet <edumazet@google.com> |
mlx4: use netdev_rss_key_fill() helper Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Also provide ethtool -x support to fetch RSS key Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
09e05c3f |
|
10-Sep-2014 |
Matan Barak <matanb@mellanox.com> |
net/mlx4: Set vlan stripping policy by the right command Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ce8d9e0d |
|
15-May-2014 |
Matan Barak <matanb@mellanox.com> |
net/mlx4_core: Add UPDATE_QP SRIOV wrapper support This patch adds UPDATE_QP SRIOV wrapper support. The mechanism is a general one, but currently only source MAC index changes are allowed for VFs. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ec570940 |
|
02-Mar-2014 |
Amir Vadai <amirv@mellanox.com> |
net/mlx4_en: Use union for BlueFlame WQE When BlueFlame is turned on, control segment of the TX WQE is changed, and the second line of it is used for QPN. Changed code to use a union in the mlx4_wqe_ctrl_seg instead of casting. This makes the code clearer and solves the static checker warning: drivers/net/ethernet/mellanox/mlx4/en_tx.c:839 mlx4_en_xmit() warn: potential memory corrupting cast 4 vs 2 bytes CC: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7ffdf726 |
|
23-Dec-2013 |
Or Gerlitz <ogerlitz@mellanox.com> |
net/mlx4_core: Add basic support for TCP/IP offloads under tunneling Add the low-level device commands and definitions used for TCP/IP HW offloads of tunneled/vxlan traffic which are supported by the ConnectX3-pro NIC. This is done through the following elements: - read tunneling device caps in QUERY_DEV_CAP - add helper function to do SET_PORT for tunneling - add DMFS VXLAN steering rule definitions - add CQE and WQE checksum offload field definitions Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
574e2af7 |
|
01-Aug-2013 |
Joe Perches <joe@perches.com> |
include: Convert ethernet mac address declarations to use ETH_ALEN It's convenient to have ethernet mac addresses use ETH_ALEN to be able to grep for them a bit easier and also to ensure that the addresses are __aligned(2). Add #include <linux/if_ether.h> as necessary. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0a6eac24 |
|
27-Jun-2013 |
Rony Efraim <ronye@mellanox.com> |
net/mlx4_core: Add HW enforcement to VF link state When the firmware supports the UPDATE_QP command, if the VF link is disabled, block all QPs opened by the VF, by programming the UPDATE_QP command to drop all RX & TX traffic to/from these QPs. Operates only in VST mode. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b01978ca |
|
27-Jun-2013 |
Jack Morgenstein <jackm@dev.mellanox.co.il> |
net/mlx4_core: Dynamic VST to VST vlan/qos changes Within VST mode, enable modifying the vlan and/or qos for a VF without requiring unbind/rebind. This requires firmware which supports the UPDATE_QP command. (If the command is not available, we fall back to requiring unbind/bind to activate these changes). To avoid race conditions with modify-qp on QPs that are affected by update-qp, this operation is performed on the comm_wq. If the update operation succeeds for all the necessary QPs, a vlan_unregister is performed for the abandoned vlan id. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7677fc96 |
|
08-May-2013 |
Rony Efraim <ronye@mellanox.com> |
net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ff63e19 |
|
06-Feb-2013 |
Shani Michaeli <shanim@mellanox.com> |
IB/mlx4: Support memory window binding * Implement memory windows binding in mlx4_ib_post_send. * Implement mlx4_ib_bind_mw by deferring to mlx4_ib_post_send. * Rename MLX4_WQE_FMR_PERM_* flags to MLX4_WQE_FMR_AND_BIND_PERM_*, indicating that they are used both for fast registration work requests, and for memory window bind work requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
aee38fad |
|
06-Feb-2013 |
Shani Michaeli <shanim@mellanox.com> |
IB/mlx4_ib: Remove local invalidate segment unused fields Remove unused fields from the local invalidate WQE segment structure. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
1ffeb2eb |
|
03-Aug-2012 |
Jack Morgenstein <jackm@dev.mellanox.co.il> |
IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support 1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
c0c1d3d7 |
|
29-Apr-2012 |
Oren Duer <oren@mellanox.co.il> |
IB/mlx4: Put priority bits in WQE of IBoE MLX QP Otherwise CM packets going over MLX QP1 get fixed scheduling priority 0. We want CM packets to get the same scheduling priority, and therefore map to the same SQ (Schedule Queue) and eventually TC (Traffic Class), as the application requested for the actual QP used for the connection. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
0e98b523 |
|
04-Apr-2012 |
Amir Vadai <amirv@mellanox.com> |
net/mlx4_en: Force user priority by QP attribute Instead of relying on HW to change schedule queue by UP, schedule queue is fixed for a tx_ring, and UP in WQE is ignored in this aspect. This resolves two issues with untagged traffic: 1. untagged traffic has no UP in packet which is needed for QoS. The change above allows setting the schedule queue (and by that the UP) of such a stream. 2. BlueFlame uses the same field used by vlan tag. So forcing UP from QPC allows using BF for untagged but prioritized traffic. In old firmware that force UP is not supported, untagged traffic will not subject to QoS. Because UP is set by QP, need to always have a tx ring per UP, even if pfcrx module paramter is false. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
62212171 |
|
24-Feb-2012 |
Eric Dumazet <eric.dumazet@gmail.com> |
mlx4_en: dont change mac_header on xmit A driver xmit function is not allowed to change skb without special care. mlx4_en_xmit() should not call skb_reset_mac_header() and instead should use skb->data to access ethernet header. This removes a dumb test : if (ethh && ethh->h_dest) Also remove this slow mlx4_en_mac_to_u64() call, we can use get_unaligned() to get faster code. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
60d6fe99 |
|
26-Nov-2011 |
Amir Vadai <amirv@mellanox.co.il> |
net/mlx4_en: adding loopback support Device must be in promiscuous mode or DMAC must be same as the host MAC, or else packet will be dropped by the HW rx filtering. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
876f6e67 |
|
26-Nov-2011 |
Or Gerlitz <ogerlitz@mellanox.com> |
net/mlx4: move RSS related definitions to be global Towards adding RSS support for IB drivers/application who use the mlx4 HW, make the RSS related definitions global and change the mlx4_en driver to use them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0a1405da |
|
02-Jun-2011 |
Sean Hefty <sean.hefty@intel.com> |
IB/mlx4: Add support for XRC QPs Support the creation of XRC INI and TGT QPs. To handle the case where a CQ or PD is not provided, we allocate them internally with the xrcd. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
cfcde11c |
|
15-Jun-2011 |
Or Gerlitz <ogerlitz@mellanox.com> |
IB/mlx4: Use flow counters on IBoE ports Allocate flow counter per Ethernet/IBoE port, and attach this counter to all the QPs created on that port. Based on patch by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
98a13e48 |
|
15-Jun-2011 |
Or Gerlitz <ogerlitz@mellanox.com> |
mlx4_core: Fix location of counter index in QP context struct Fix the address handle portion of the QP context structure to have the correct bit location for the counter index field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
|
#
c1b43dca |
|
22-Mar-2011 |
Eli Cohen <eli@mellanox.co.il> |
mlx4: Add blue flame support for kernel consumers Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4c3eb3ca |
|
26-Aug-2010 |
Eli Cohen <eli@dev.mellanox.co.il> |
IB/mlx4: Add VLAN support for IBoE This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
96dfa684 |
|
20-Oct-2010 |
Eli Cohen <eli@mellanox.co.il> |
mlx4_core: Update data structures and constants for IBoE Add fields to hardware data structures and add new constants required for IBoE support. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
6fa8f719 |
|
14-Apr-2010 |
Vladimir Sokolovsky <vlad@mellanox.co.il> |
IB/mlx4: Add support for masked atomic operations Add support for masked atomic operations (masked compare and swap, masked fetch and add). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
2ac6bf4d |
|
05-Jun-2009 |
Jack Morgenstein <jackm@dev.mellanox.co.il> |
IB/mlx4: Add strong ordering to local inval and fast reg work requests The ConnectX Programmer's Reference Manual states that the "SO" bit must be set when posting Fast Register and Local Invalidate send work requests. When this bit is set, the work request will be executed only after all previous work requests on the send queue have been executed. (If the bit is not set, Fast Register and Local Invalidate WQEs may begin execution too early, which violates the defined semantics for these operations) This fixes the issue with NFS/RDMA reported in <http://lists.openfabrics.org/pipermail/general/2009-April/059253.html> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
25c94d01 |
|
25-Jul-2008 |
Yevgeny Petrilin <yevgenyp@mellanox.co.il> |
mlx4_core: Add VLAN tag field to WQE control segment struct Add fields for VLAN tag and insert VLAN tag flag to the control section struct. These fields will be used for sending ethernet packets. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
95d04f07 |
|
23-Jul-2008 |
Roland Dreier <rolandd@cisco.com> |
IB/mlx4: Add support for memory management extensions and local DMA L_Key Add support for the following operations to mlx4 when device firmware supports them: - Send with invalidate and local invalidate send queue work requests; - Allocate/free fast register MRs; - Allocate/free fast register MR page lists; - Fast register MR send queue work requests; - Local DMA L_Key. Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
47b37475 |
|
22-Jul-2008 |
Roland Dreier <rolandd@cisco.com> |
IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg Make the struct name consistent with other WQE segment struct types defined in <linux/mlx4/qp.h>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
ed4d3c10 |
|
25-Apr-2008 |
Yevgeny Petrilin <yevgenyp@mellanox.co.il> |
mlx4_core: Add helper to move QP to ready-to-send Avoid duplicating code in ethernet and FC modules. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
b832be1e |
|
16-Apr-2008 |
Eli Cohen <eli@dev.mellanox.co.il> |
IB/mlx4: Add IPoIB LSO support Add TSO support to the mlx4_ib driver. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
8ff095ec |
|
16-Apr-2008 |
Eli Cohen <eli@dev.mellanox.co.il> |
IB/mlx4: Add IPoIB checksum offload support ConnectX devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Ali Ayub <ali@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
ea54b10c |
|
28-Jan-2008 |
Jack Morgenstein <jackm@dev.mellanox.co.il> |
IB/mlx4: Use multiple WQ blocks to post smaller send WQEs ConnectX HCA supports shrinking WQEs, so that a single work request can be made of multiple units of wqe_shift. This way, WRs can differ in size, and do not have to be a power of 2 in size, saving memory and speeding up send WR posting. Unfortunately, if we do this then the wqe_index field in CQEs can't be used to look up the WR ID anymore, so our implementation does this only if selective signaling is off. Further, on 32-bit platforms, we can't use vmap() to make the QP buffer virtually contigious. Thus we have to use constant-sized WRs to make sure a WR is always fully within a single page-sized chunk. Finally, we use WRs with the NOP opcode to avoid wrapping around the queue buffer in the middle of posting a WR, and we set the NoErrorCompletion bit to avoid getting completions with error for NOP WRs. However, NEC is only supported starting with firmware 2.2.232, so we use constant-sized WRs for older firmware. And, since MLX QPs only support SEND, we use constant-sized WRs in this case. When stamping during NOP posting, do stamping following setting of the NOP WQE valid bit. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
6a775e2b |
|
20-Jun-2007 |
Jack Morgenstein <jackm@dev.mellanox.co.il> |
IB/mlx4: Implement query QP Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
e61ef241 |
|
18-Jun-2007 |
Roland Dreier <rolandd@cisco.com> |
IB/mlx4: Make sure inline data segments don't cross a 64 byte boundary Inline data segments in send WQEs are not allowed to cross a 64 byte boundary. We use inline data segments to hold the UD headers for MLX QPs (QP0 and QP1). A send with GRH on QP1 will have a UD header that is too big to fit in a single inline data segment without crossing a 64 byte boundary, so split the header into two inline data segments. Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
#
225c7b1f |
|
08-May-2007 |
Roland Dreier <rolandd@cisco.com> |
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
|