#
1f67b599 |
|
04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 464 Based on 1 normalized pattern(s): license terms gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.373849232@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
6377cfa3 |
|
21-Dec-2018 |
Stefan Agner <stefan@agner.ch> |
mfd: stmpe: Preparations for STMPE ADC driver This prepares the MFD for the STMPE ADC driver. This commit introduces devicetree settings that are used by the ADC and adds an init function. Common ADC settings that are shared with the touchscreen driver can now reside in the overlying MFD. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
063755ab |
|
21-Dec-2018 |
Philippe Schenker <philippe.schenker@toradex.com> |
mfd: stmpe: Move ADC related defines to MFD header Move defines that are ADC related to the header of the overlying MFD, so they can be used from multiple sub-devices. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
6bb9f0d9 |
|
10-Aug-2016 |
Patrice Chotard <patrice.chotard@st.com> |
mfd: Add STMPE1600 support STMPE1600 is a 16-bit port expander. Datasheet is available here : http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/ i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html Signed-off-by: Amelie DELAUNAY <amelie.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
897ac667 |
|
10-Aug-2016 |
Patrice Chotard <patrice.chotard@st.com> |
mfd: stmpe: Rework registers access this update allows to use registers map as following : regs[reg_index + offset] instead of regs[reg_index] + offset This makes code clearer and will facilitate the addition of STMPE1600 on which LSB and MSB registers are respectively located at addr and addr + 1. Despite for all others STMPE variant, LSB and MSB registers are respectively located in reverse order at addr + 1 and addr. For variant which have 3 registers's bank, we use LSB,CSB and MSB indexes which contains respectively LSB (or LOW), CSB (or MID) and MSB (or HIGH) register addresses (STMPE1801/STMPE24xx). For variant which have 2 registers's bank, we use LSB and CSB indexes only. In this case the CSB index contains the MSB regs address (STMPE 1601). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
0f4be8cf |
|
10-Aug-2016 |
Patrice Chotard <patrice.chotard@st.com> |
mfd: stmpe: Add STMPE_IDX_SYS_CTRL/2 enum As STMPE1801/1601/24xx has a SYS_CTRL register and STMPE1601/2403 has even a SYS_CTRL2 register, add STMPE_IDX_SYS_CTRL/2 and update driver code accordingly This update prepares the ground for not yet supported STMPE1600 which share similar REG_SYS_CTRL register. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
fc1882dc |
|
25-May-2016 |
Linus Walleij <linus.walleij@linaro.org> |
mfd: stmpe: Move platform data into MFD driver The STMPE platform data is only populated from the device tree in all existing users, so push the struct and make the OF case the norm. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
e4b88e19 |
|
22-May-2015 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: stmpe-ts - enforce device tree only mode The STMPE MFD is only used with device tree configured systems (and STMPE MFD core depends on OF), so force the configuration to come from device tree only. Tested-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
1dfb4a0d |
|
13-Jan-2015 |
Linus Walleij <linus.walleij@linaro.org> |
gpio: stmpe: enforce device tree only mode Require that device tree be used with STMPE (all platforms use this) and enforce OF_GPIO, then delete the platform data. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
a4164863 |
|
03-Nov-2014 |
Linus Walleij <linus.walleij@linaro.org> |
Input: stmpe - enforce device tree only mode The STMPE keypad controller is only used with device tree configured systems, so force the configuration to come from device tree only, and now actually get the rows and cols from the device tree too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
80e1dd82 |
|
03-Nov-2014 |
Linus Walleij <linus.walleij@linaro.org> |
mfd: stmpe: add pull up/down register offsets for STMPE This adds the register offsets for pull up/down for the STMPE 1601, 1801 and 24xx expanders. This is used to bias GPIO lines and keypad lines. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
9e9dc7d9 |
|
08-May-2014 |
Linus Walleij <linus.walleij@linaro.org> |
mfd: stmpe: root out static GPIO and IRQ assignments The only platform using the STMPE expander now boots from device tree using all-dynamic GPIO and IRQ number assignments, so remove the mechanism to pass this from the device tree entirely. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
9c9e3214 |
|
08-May-2014 |
Linus Walleij <linus.walleij@linaro.org> |
mfd: stmpe: add optional regulators The STMPE has VCC and VIO supply lines, and sometimes (as on Ux500) this comes from a software-controlled regulator. Make it possible to supply the STMPE with power from these regulators. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
230f13a5 |
|
09-Apr-2013 |
Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com> |
mfd: support stmpe1801 18 bits enhanced port expander Provides support for 1801 variant of stmpe gpio port expanders. This chip has 18 gpios configurable as GPI, GPO, keypad matrix, special key or dedicated key function. Note that special/dedicated key function is not supported yet. Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
12a5105e |
|
28-Nov-2012 |
Viresh Kumar <viresh.kumar@linaro.org> |
mfd: stmpe: Get rid of irq_invert_polarity Since the very first patch, stmpe core driver is using irq_invert_polarity as part of platform data. But, nobody is actually using it in kernel till now. Also, this is not something part of hardware specs, but is included to cater some board mistakes or quirks. So, better get rid of it. This is earlier discussed here: https://lkml.org/lkml/2012/11/27/636 Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
76f93992 |
|
05-Nov-2012 |
Lee Jones <lee.jones@linaro.org> |
mfd: Provide the STMPE driver with its own IRQ domain The STMPE driver is yet another IRQ controller which requires its own IRQ domain. So, we provide it with one. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
1379f49e |
|
23-Apr-2012 |
Linus Walleij <linus.walleij@linaro.org> |
mfd: Allow for const stmpe keyboard data Since it's not like we will re-arrange the keys at run-time, it seems proper to allow the keymap data to be const. This solves a compilation warning in ux500. Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
313162d0 |
|
30-Jan-2012 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
device.h: audit and cleanup users in main include dir The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
#
e31f9b82 |
|
26-Jan-2012 |
Chris Blair <chris.blair@stericsson.com> |
mfd: Add support for no-interrupt stmpe config Adds support for boards which have an STMPE device without the interrupt pin connected. Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Tested-by: Michel Jaouen <michel.jaouen@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
7f7f4ea1 |
|
16-Nov-2011 |
Viresh Kumar <vireshk@kernel.org> |
mfd: Add support for stmpe variant 801 STMPE801 is a GPIO expander. Registers for 801 are much different from other variants. This patch adds support for STMPE801 in stmpe mfd driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
1cda2394 |
|
16-Nov-2011 |
Viresh Kumar <vireshk@kernel.org> |
mfd: Add support for stmpe variant 610 STMPE610 is very much like STMPE811, except the number of gpio pins, which is 8 in 811 and 6 in 610. This patch adds support for variant 610. STMPE610 will share most of the code with STMPE811. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
1a6e4b74 |
|
16-Nov-2011 |
Viresh Kumar <vireshk@kernel.org> |
mfd: Separate out STMPE controller and interface specific code Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
73de16db |
|
07-Nov-2011 |
Viresh Kumar <vireshk@kernel.org> |
mfd: Add support for irq over gpio pin to stmpe On many boards, stmpe is present as an separate device (not as part of SoC). Here gpio lines are mostly used for getting interrupts. This patch adds in support to handle irq over gpio pin. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
4dcaa6b6 |
|
27-Jun-2011 |
Om Prakash <omprakash.pal@stericsson.com> |
mfd: Fix missing stmpe kerneldoc Generating kerneldoc for STMPE result in warnings, so fix this by adding missing documentation. Signed-off-by: Om Prakash <omprakash.pal@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
b8e9cf0b |
|
16-Aug-2010 |
Wolfram Sang <wsa@kernel.org> |
gpio: Add bitmask to block requests to unavailable stmpe GPIOs GPIOs on these controller are multi-functional. If you decided to use some of them e.g. as input channels for the ADC, you surely don't want those pins to be reassigned as simple GPIOs (which may be triggered even from userspace via 'export'). Same for the touchscreen controller pins. Since knowledge about the hardware is needed to decide which GPIOs to reserve, let this bitmask be inside platform_data and provide some defines to assist potential users. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
5981f4e6 |
|
21-Jul-2010 |
Sundar R Iyer <sundar.iyer@stericsson.com> |
mfd: Add stmpe auto sleep feature Some STMPE devices support entering sleep mode automatically on a specified timeout of inactivity on the I2C bus with the host system. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
27e34995 |
|
02-Jul-2010 |
Rabin Vincent <rabin.vincent@stericsson.com> |
mfd: Add STMPE I/O Expander support Add support for the STMPE family of I/O Expanders from STMicroelectronics. These devices include upto 24 gpios and a varying selection of blocks, including PWM, keypad, and touchscreen controllers. This patch adds the MFD core. [l.fu@pengutronix.de: fix stmpe811 enable hook] [l.fu@pengutronix.de: add touchscreen platform data] Acked-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|