mfd: rt5033: Apply preparatory changes before adding rt5033-charger driver

Order the register blocks to have the masks in descending manner.

Add new defines for constant voltage shift (RT5033_CHGCTRL2_CV_SHIFT),
MIVR mask (RT5033_CHGCTRL4_MIVR_MASK), pre-charge current shift
(RT5033_CHGCTRL4_IPREC_SHIFT), internal timer disable
(RT5033_INT_TIMER_DISABLE), termination disable (RT5033_TE_DISABLE),
CFO disable (RT5033_CFO_DISABLE), UUG disable (RT5033_CHARGER_UUG_DISABLE).

The fast charge timer type needs to be written on mask 0x38
(RT5033_CHGCTRL3_TIMER_MASK). To avoid a bit shift on application, change the
values of the timer types to fit the mask. Added the timout duration as a
comment. And the timer between TIMER8 and TIMER12 is most likely TIMER10, see
e.g. RT5036 [1] page 28 bottom.

Add value options for MIVR (Minimum Input Voltage Regulation).

Move RT5033_TE_ENABLE_MASK to the block "RT5033 CHGCTRL1 register", in order
to have the masks of the register collected there. To fit the naming scheme,
rename it to RT5033_CHGCTRL1_TE_EN_MASK.

Move RT5033_CHG_MAX_CURRENT to the block "RT5033 charger fast-charge current".

Add new defines RT5033_CV_MAX_VOLTAGE and RT5033_CHG_MAX_PRE_CURRENT to the
blocks "RT5033 charger constant charge voltage" and "RT5033 charger pre-charge
current limits".

In include/linux/mfd/rt5033.h, turn power_supply "psy" into a pointer in order
to use it in devm_power_supply_register().

[1] https://media.digikey.com/pdf/Data%20Sheets/Richtek%20PDF/RT5036%20%20Preliminary.pdf

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/31c750ae13a1c1896b51d8f0a0d9869f8b85624f.1684182964.git.jahau@rocketmail.com

mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines

The charger state mask RT5033_CHG_STAT_MASK should be 0x30 [1][2].

The high impedance mask RT5033_RT_HZ_MASK is actually value 0x02 [3] and is
assosiated to the RT5033 CHGCTRL1 register [4]. Accordingly also change
RT5033_CHARGER_HZ_ENABLE to 0x02 to avoid the need of a bit shift upon
application.

For input current limiting AICR mode, the define for the 1000 mA step was
missing [5]. Additionally add the define for DISABLE option. Concerning the
mask, remove RT5033_AICR_MODE_MASK because there is already
RT5033_CHGCTRL1_IAICR_MASK further up. They are redundant and the upper one
makes more sense to have the masks of a register colleted there as an
overview.

[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L669-L682
[2] https://github.com/torvalds/linux/blob/v6.0/include/linux/mfd/rt5033-private.h#L59-L62
[3] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/include/linux/battery/charger/rt5033_charger.h#L44
[4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L223
[5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L278

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/2f17beec3d6c59b41d7e2451d177dc8aaeb7efe2.1684182964.git.jahau@rocketmail.com

mfd: rt5033: Fix chip revision readout

After reading the data from the DEVICE_ID register, mask 0x0f needs to be
applied to extract the revision of the chip [1].

The other part of the DEVICE_ID register, mask 0xf0, is a vendor identification
code. That's how it is set up at similar products of Richtek, e.g. RT9455 [2]
page 21 top.

[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/mfd/rt5033_core.c#L484
[2] https://www.richtek.com/assets/product_file/RT9455/DS9455-00.pdf

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/9a98521ffdf76851d5d344afa6ce65f692ecc024.1684182964.git.jahau@rocketmail.com

mfd: rt5033: Fix comments and style in includes

Fix comments and remove some empty lines in rt5033-private.h. Align struct
rt5033_charger in rt5033.h.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/606950da6f4b36f5a124ff13756c78644fc89804.1677620677.git.jahau@rocketmail.com

regulator: rt5033: Use linear ranges to map all voltage selection

Instead of linear mapping, Use linear range to map all voltage selection.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1625553939-9109-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

regulator: rt5033: Fix n_voltages settings for BUCK and LDO

For linear regulators, the n_voltages should be (max - min) / step + 1.

Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f.
If value is from 20 to 31, the voltage will all be fixed to 3V.
And LDO also, just vout range is different from 1.2v to 3v, step is the
same. If value is from 18 to 31, the voltage will also be fixed to 3v.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210627080418.1718127-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>

mfd: rt5033: Fix errorneous defines

Fix regulators on rt5033 by converting some values to bitmasks which were
errorneously not defined as such in the header file.

Cc: Beomho Seo <beomho.seo@samsung.com>
Fixes: 0b271258544b ("mfd: rt5033: Add Richtek RT5033 driver core.")
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published bythe free software foundation

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 5 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190116.345887520@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: rt5033: Add Richtek RT5033 driver core.

This patch adds a new driver for Richtek RT5033 driver.
RT5033 is a Multifunction device which includes battery charger, fuel gauge,
flash LED current source, LDO and synchronous Buck converter. It is interfaced
to host controller using I2C interface.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>