#
ff81dade |
|
09-Apr-2024 |
Haiyue Wang <haiyue.wang@intel.com> |
io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE The 'r' key is near to 't' key, that makes 'with' to be 'wirh' ? :) Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Link: https://lore.kernel.org/r/20240409173531.846714-1-haiyue.wang@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
09ab7eff |
|
14-Mar-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring/kbuf: get rid of lower BGID lists Just rely on the xarray for any kind of bgid. This simplifies things, and it really doesn't bring us much, if anything. Cc: stable@vger.kernel.org # v6.4+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
186daf23 |
|
07-Mar-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring/kbuf: rename REQ_F_PARTIAL_IO to REQ_F_BL_NO_RECYCLE We only use the flag for this purpose, so rename it accordingly. This further prevents various other use cases of it, keeping it clean and consistent. Then we can also check it in one spot, when it's being attempted recycled, and remove some dead code in io_kbuf_recycle_ring(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c3f9109d |
|
19-Feb-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring/kbuf: flag request if buffer pool is empty after buffer pick Normally we do an extra roundtrip for retries even if the buffer pool has depleted, as we don't check that upfront. Rather than add this check, have the buffer selection methods mark the request with REQ_F_BL_EMPTY if the used buffer group is out of buffers after this selection. This is very cheap to do once we're all the way inside there anyway, and it gives the caller a chance to make better decisions on how to proceed. For example, recv/recvmsg multishot could check this flag when it decides whether to keep receiving or not. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b4ccc4dd |
|
15-Feb-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring/napi: enable even with a timeout of 0 1 usec is not as short as it used to be, and it makes sense to allow 0 for a busy poll timeout - this means just do one loop to check if we have anything available. Add a separate ->napi_enabled to check if napi has been enabled or not. While at it, move the writing of the ctx napi values after we've copied the old values back to userspace. This ensures that if the call fails, we'll be in the same state as we were before, rather than some indeterminate state. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8d0c12a8 |
|
08-Jun-2023 |
Stefan Roesch <shr@devkernel.io> |
io-uring: add napi busy poll support This adds the napi busy polling support in io_uring.c. It adds a new napi_list to the io_ring_ctx structure. This list contains the list of napi_id's that are currently enabled for busy polling. The list is synchronized by the new napi_lock spin lock. The current default napi busy polling time is stored in napi_busy_poll_to. If napi busy polling is not enabled, the value is 0. In addition there is also a hash table. The hash table store the napi id and the pointer to the above list nodes. The hash table is used to speed up the lookup to the list elements. The hash table is synchronized with rcu. The NAPI_TIMEOUT is stored as a timeout to make sure that the time a napi entry is stored in the napi list is limited. The busy poll timeout is also stored as part of the io_wait_queue. This is necessary as for sq polling the poll interval needs to be adjusted and the napi callback allows only to pass in one value. This has been tested with two simple programs from the liburing library repository: the napi client and the napi server program. The client sends a request, which has a timestamp in its payload and the server replies with the same payload. The client calculates the roundtrip time and stores it to calculate the results. The client is running on host1 and the server is running on host 2 (in the same rack). The measured times below are roundtrip times. They are average times over 5 runs each. Each run measures 1 million roundtrips. no rx coal rx coal: frames=88,usecs=33 Default 57us 56us client_poll=100us 47us 46us server_poll=100us 51us 46us client_poll=100us+ 40us 40us server_poll=100us client_poll=100us+ 41us 39us server_poll=100us+ prefer napi busy poll on client client_poll=100us+ 41us 39us server_poll=100us+ prefer napi busy poll on server client_poll=100us+ 41us 39us server_poll=100us+ prefer napi busy poll on client + server Signed-off-by: Stefan Roesch <shr@devkernel.io> Suggested-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230608163839.2891748-5-shr@devkernel.io Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
da08d2ed |
|
08-Feb-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring: re-arrange struct io_ring_ctx to reduce padding Nothing major here, just moving a few things around to reduce the padding. This reduces the size on a non-debug kernel from 1536 to 1472 bytes, saving a full cacheline. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
95041b93 |
|
28-Jan-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring: add io_file_can_poll() helper This adds a flag to avoid dipping dereferencing file and then f_op to figure out if the file has a poll handler defined or not. We generally call this at least twice for networked workloads, and if using ring provided buffers, we do it on every buffer selection. Particularly the latter is troublesome, as it's otherwise a very fast operation. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
521223d7 |
|
28-Jan-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring/cancel: don't default to setting req->work.cancel_seq Just leave it unset by default, avoiding dipping into the last cacheline (which is otherwise untouched) for the fast path of using poll to drive networked traffic. Add a flag that tells us if the sequence is valid or not, and then we can defer actually assigning the flag and sequence until someone runs cancelations. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4bcb982c |
|
28-Jan-2024 |
Jens Axboe <axboe@kernel.dk> |
io_uring: expand main struct io_kiocb flags to 64-bits We're out of space here, and none of the flags are easily reclaimable. Bump it to 64-bits and re-arrange the struct a bit to avoid gaps. Add a specific bitwise type for the request flags, io_request_flags_t. This will help catch violations of casting this value to a smaller type on 32-bit archs, like unsigned int. This creates a hole in the io_kiocb, so move nr_tw up and rsrc_node down to retain needing only cacheline 0 and 1 for non-polled opcodes. No functional changes intended in this patch. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6e5e6d27 |
|
19-Dec-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring: drop any code related to SCM_RIGHTS This is dead code after we dropped support for passing io_uring fds over SCM_RIGHTS, get rid of it. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6b04a373 |
|
30-Nov-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/cmd: inline io_uring_cmd_do_in_task_lazy Now as we can easily include io_uring_types.h, move IOU_F_TWQ_LAZY_WAKE and inline io_uring_cmd_do_in_task_lazy(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/2ec9fb31dd192d1c5cf26d0a2dec5657d88a8e48.1701391955.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b66509b8 |
|
30-Nov-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: split out cmd api into a separate header linux/io_uring.h is slowly becoming a rubbish bin where we put anything exposed to other subsystems. For instance, the task exit hooks and io_uring cmd infra are completely orthogonal and don't need each other's definitions. Start cleaning it up by splitting out all command bits into a new header file. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
595e5228 |
|
13-Dec-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE There are a few quirks around using lazy wake for poll unconditionally, and one of them is related the EPOLLEXCLUSIVE. Those may trigger exclusive wakeups, which wake a limited number of entries in the wait queue. If that wake number is less than the number of entries someone is waiting for (and that someone is also using DEFER_TASKRUN), then we can get stuck waiting for more entries while we should be processing the ones we already got. If we're doing exclusive poll waits, flag the request as not being compatible with lazy wakeups. Reported-by: Pavel Begunkov <asml.silence@gmail.com> Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups") Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c392cbec |
|
27-Nov-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring/kbuf: defer release of mapped buffer rings If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the kernel allocates the memory for it and the application is expected to mmap(2) this memory. However, io_uring uses remap_pfn_range() for this operation, so we cannot rely on normal munmap/release on freeing them for us. Stash an io_buf_free entry away for each of these, if any, and provide a helper to free them post ->release(). Cc: stable@vger.kernel.org Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b3a4dbc8 |
|
04-Oct-2023 |
Gabriel Krisman Bertazi <krisman@suse.de> |
io_uring/kbuf: Use slab for struct io_buffer objects The allocation of struct io_buffer for metadata of provided buffers is done through a custom allocator that directly gets pages and fragments them. But, slab would do just fine, as this is not a hot path (in fact, it is a deprecated feature) and, by keeping a custom allocator implementation we lose benefits like tracking, poisoning, sanitizers. Finally, the custom code is more complex and requires keeping the list of pages in struct ctx for no good reason. This patch cleans this path up and just uses slab. I microbenchmarked it by forcing the allocation of a large number of objects with the least number of io_uring commands possible (keeping nbufs=USHRT_MAX), with and without the patch. There is a slight increase in time spent in the allocation with slab, of course, but even when allocating to system resources exhaustion, which is not very realistic and happened around 1/2 billion provided buffers for me, it wasn't a significant hit in system time. Specially if we think of a real-world scenario, an application doing register/unregister of provided buffers will hit ctx->io_buffers_cache more often than actually going to slab. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20231005000531.30800-4-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
194bb58c |
|
08-Jun-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
93b8cc60 |
|
28-Sep-2023 |
Ming Lei <ming.lei@redhat.com> |
io_uring: cancelable uring_cmd uring_cmd may never complete, such as ublk, in which uring cmd isn't completed until one new block request is coming from ublk block device. Add cancelable uring_cmd to provide mechanism to driver for cancelling pending commands in its own way. Add API of io_uring_cmd_mark_cancelable() for driver to mark one command as cancelable, then io_uring will cancel this command in io_uring_cancel_generic(). ->uring_cmd() callback is reused for canceling command in driver's way, then driver gets notified with the cancelling from io_uring. Add API of io_uring_cmd_get_task() to help driver cancel handler deal with the canceling. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
f31ecf67 |
|
10-Jul-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring: add IORING_OP_WAITID support This adds support for an async version of waitid(2), in a fully async version. If an event isn't immediately available, wait for a callback to trigger a retry. The format of the sqe is as follows: sqe->len The 'which', the idtype being queried/waited for. sqe->fd The 'pid' (or id) being waited for. sqe->file_index The 'options' being set. sqe->addr2 A pointer to siginfo_t, if any, being filled in. buf_index, add3, and waitid_flags are reserved/unused for now. waitid_flags will be used for options for this request type. One interesting use case may be to add multi-shot support, so that the request stays armed and posts a notification every time a monitored process state change occurs. Note that this does not support rusage, on Arnd's recommendation. See the waitid(2) man page for details on the arguments. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
644c4a7a |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: move iopoll ctx fields around Move poll_multi_queue and iopoll_list to the submission cache line, it doesn't make much sense to keep them separately, and is better place for it in general. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/5b03cf7e6652e350e6e70a917eec72ba9f33b97b.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0aa7aa5f |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: move multishot cqe cache in ctx We cache multishot CQEs before flushing them to the CQ in submit_state.cqe. It's a 16 entry cache totalling 256 bytes in the middle of the io_submit_state structure. Move it out of there, it should help with CPU caches for the submission state, and shouldn't affect cached CQEs. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/dbe1f39c043ee23da918836be44fcec252ce6711.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c9def23d |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: separate task_work/waiting cache line task_work's are typically queued up from IRQ/softirq potentially by a random CPU like in case of networking. Batch ctx fields bouncing as this into a separate cache line. We also move ->cq_timeouts there because waiters have to read and check it. We can also conditionally hide ->cq_timeouts in the future from the CQ wait path as a not really useful rudiment. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b7f3fcb5b6b9cca0238778262c1fdb7ada6286b7.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
18df385f |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: banish non-hot data to end of io_ring_ctx Let's move all slow path, setup/init and so on fields to the end of io_ring_ctx, that makes ctx reorganisation later easier. That includes, page arrays used only on tear down, CQ overflow list, old provided buffer caches and used by io-wq poll hashes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/fc471b63925a0bf90a34943c4d36163c523cfb43.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d7f06fea |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: move non aligned field to the end Move not cache aligned fields down in io_ring_ctx, should change anything, but makes further refactoring easier. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/518e95d7888e9d481b2c5968dcf3f23db9ea47a5.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e5598d6a |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: compact SQ/CQ heads/tails Queues heads and tails cache line aligned. That makes sq, cq taking 4 lines or 5 lines if we include the rest of struct io_rings (e.g. sq_flags is frequently accessed). Since modern io_uring is mostly single threaded, it doesn't make much send to spread them as such, it wastes space and puts additional pressure on caches. Put them all into a single line. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9c8deddf9a7ed32069235a530d1e117fb460bc4c.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ec26c225 |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: merge iopoll and normal completion paths io_do_iopoll() and io_submit_flush_completions() are pretty similar, both filling CQEs and then free a list of requests. Don't duplicate it and make iopoll use __io_submit_flush_completions(), which also helps with inlining and other optimisations. For that, we need to first find all completed iopoll requests and splice them from the iopoll list and then pass it down. This adds one extra list traversal, which should be fine as requests will stay hot in cache. CQ locking is already conditional, introduce ->lockless_cq and skip locking for IOPOLL as it's protected by ->uring_lock. We also add a wakeup optimisation for IOPOLL to __io_cq_unlock_post(), so it works just like io_cqring_ev_posted_iopoll(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/3840473f5e8a960de35b77292026691880f6bdbc.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b24c5d75 |
|
24-Aug-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: simplify big_cqe handling Don't keep big_cqe bits of req in a union with hash_node, find a separate space for it. It's bit safer, but also if we keep it always initialised, we can get rid of ugly REQ_F_CQE32_INIT handling. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/447aa1b2968978c99e655ba88db536e903df0fe9.1692916914.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
03d89a2d |
|
05-Nov-2021 |
Jens Axboe <axboe@kernel.dk> |
io_uring: support for user allocated memory for rings/sqes Currently io_uring applications must call mmap(2) twice to map the rings themselves, and the sqes array. This works fine, but it does not support using huge pages to back the rings/sqes. Provide a way for the application to pass in pre-allocated memory for the rings/sqes, which can then suitably be allocated from shmfs or via mmap to get huge page support. Particularly for larger rings, this reduces the TLBs needed. If an application wishes to take advantage of that, it must pre-allocate the memory needed for the sq/cq ring, and the sqes. The former must be passed in via the io_uring_params->cq_off.user_data field, while the latter is passed in via the io_uring_params->sq_off.user_data field. Then it must set IORING_SETUP_NO_MMAP in the io_uring_params->flags field, and io_uring will then map the existing memory into the kernel for shared use. The application must not call mmap(2) to map rings as it otherwise would have, that will now fail with -EINVAL if this setup flag was used. The pages used for the rings and sqes must be contigious. The intent here is clearly that huge pages should be used, otherwise the normal setup procedure works fine as-is. The application may use one huge page for both the rings and sqes. Outside of those initialization changes, everything works like it did before. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0b222eeb |
|
13-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: remove rsrc_data refs Instead of waiting for rsrc_data->refs to be downed to zero, check whether there are rsrc nodes queued for completion, that's easier then maintaining references. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8e33fd143d83e11af3e386aea28eb6d6c6a1be10.1681395792.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4ea15b56 |
|
13-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: use wq for quiescing Replace completions with waitqueues for rsrc data quiesce, the main wakeup condition is when data refs hit zero. Note that data refs are only changes under ->uring_lock, so we prepare before mutex_unlock() reacquire it after taking the lock back. This change will be needed in the next patch. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1d0dbc74b3b4fd67c8f01819e680c5e0da252956.1681395792.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
528407b1 |
|
10-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: consolidate node caching We store one pre-allocated rsrc node in ->rsrc_backup_node, merge it with ->rsrc_node_cache. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6d5410e51ccd29be7a716be045b51d6b371baef6.1681210788.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8751d154 |
|
06-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: reduce scheduling due to tw Every task_work will try to wake the task to be executed, which causes excessive scheduling and additional overhead. For some tw it's justified, but others won't do much but post a single CQE. When a task waits for multiple cqes, every such task_work will wake it up. Instead, the task may give a hint about how many cqes it waits for, io_req_local_work_add() will compare against it and skip wake ups if #cqes + #tw is not enough to satisfy the waiting condition. Task_work that uses the optimisation should be simple enough and never post more than one CQE. It's also ignored for non DEFER_TASKRUN rings. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d2b77e99d1e86624d8a69f7037d764b739dcd225.1680782017.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
69bbc6ad |
|
04-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: add custom limit for node caching The number of entries in the rsrc node cache is limited to 512, which still seems unnecessarily large. Add per cache thresholds and set to to 32 for the rsrc node cache. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d0cd538b944dac0bf878e276fc0199f21e6bccea.1680576071.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9eae8655 |
|
04-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: cache struct io_rsrc_node Add allocation cache for struct io_rsrc_node, it's always allocated and put under ->uring_lock, so it doesn't need any extra synchronisation around caches. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/252a9d9ef9654e6467af30fdc02f57c0118fb76e.1680576071.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
36b9818a |
|
04-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: don't offload node free struct delayed_work rsrc_put_work was previously used to offload node freeing because io_rsrc_node_ref_zero() was previously called by RCU in the IRQ context. Now, as percpu refcounting is gone, we can do it eagerly at the spot without pushing it to a worker. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/13fb1aac1e8d068ad8fd4a0c6d0d157ab61b90c0.1680576071.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0a4813b1 |
|
04-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: kill rsrc_ref_lock We use ->rsrc_ref_lock spinlock to protect ->rsrc_ref_list in io_rsrc_node_ref_zero(). Now we removed pcpu refcounting, which means io_rsrc_node_ref_zero() is not executed from the irq context as an RCU callback anymore, and we also put it under ->uring_lock. io_rsrc_node_switch(), which queues up nodes into the list, is also protected by ->uring_lock, so we can safely get rid of ->rsrc_ref_lock. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6b60af883c263551190b526a55ff2c9d5ae07141.1680576071.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8e15c0e7 |
|
04-Apr-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring/rsrc: keep cached refs per node We cache refs of the current node (i.e. ctx->rsrc_node) in ctx->rsrc_cached_refs. We'll be moving away from atomics, so move the cached refs in struct io_rsrc_node for now. It's a prep patch and shouldn't change anything in practise. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9edc3669c1d71b06c2dca78b2b2b8bb9292738b9.1680576071.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a282967c |
|
27-Mar-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: encapsulate task_work state For task works we're passing around a bool pointer for whether the current ring is locked or not, let's wrap it in a structure, that will make it more opaque preventing abuse and will also help us to pass more info in the future if needed. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1ecec9483d58696e248d1bfd52cf62b04442df1d.1679931367.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e1fe7ee8 |
|
23-Feb-2023 |
Breno Leitao <leitao@debian.org> |
io_uring: Add KASAN support for alloc_caches Add support for KASAN in the alloc_caches (apoll and netmsg_cache). Thus, if something touches the unused caches, it will raise a KASAN warning/exception. It poisons the object when the object is put to the cache, and unpoisons it when the object is gotten or freed. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20230223164353.2839177-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
efba1a9e |
|
23-Feb-2023 |
Breno Leitao <leitao@debian.org> |
io_uring: Move from hlist to io_wq_work_node Having cache entries linked using the hlist format brings no benefit, and also requires an unnecessary extra pointer address per cache entry. Use the internal io_wq_work_node single-linked list for the internal alloc caches (async_msghdr and async_poll) This is required to be able to use KASAN on cache entries, since we do not need to touch unused (and poisoned) cache entries when adding more entries to the list. Suggested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20230223164353.2839177-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8d664282 |
|
17-Feb-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring: rename 'in_idle' to 'in_cancel' This better describes what it does - it's incremented when the task is currently undergoing a cancelation operation, due to exiting or exec'ing. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
632ffe09 |
|
16-Jan-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: optimise ctx flags layout There may be different cost for reeading just one byte or more, so it's benificial to keep ctx flag bits that we access together in a single byte. That affected code generation of __io_cq_unlock_post_flush() and removed one memory load. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bbe8ca4705704690319d65e45845f9fc9d35f420.1673887636.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d80c0f00 |
|
09-Jan-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: add io_req_local_work_add wake fast path Don't wake the master task after queueing a deferred tw unless it's currently waiting in io_cqring_wait. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/717702d772825a6647e6c315b4690277ba84c3fc.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
bca39f39 |
|
09-Jan-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: add lazy poll_wq activation Even though io_poll_wq_wake()'s waitqueue_active reuses a barrier we do for another waitqueue, it's not going to be the case in the future and so we want to have a fast path for it when the ring has never been polled. Move poll_wq wake ups into __io_commit_cqring_flush() using a new flag called ->poll_activated. The idea behind the flag is to set it when the ring was polled for the first time. This requires additional sync to not miss events, which is done here by using task_work for ->task_complete rings, and by default enabling the flag for all other types of rings. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/060785e8e9137a920b232c0c7f575b131af19cac.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
7b235dd8 |
|
09-Jan-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: separate wq for ring polling Don't use ->cq_wait for ring polling but add a separate wait queue for it. We need it for following patches. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/dea0be0bf990503443c5c6c337fc66824af7d590.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
dde40322 |
|
09-Jan-2023 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: move submitter_task out of cold cacheline ->submitter_task is used somewhat more frequent now than before, i.e. for local tw enqueue and run, let's move it from the end of ctx, which is full of cold data, to the first cacheline with mostly constants. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/415ca91dc5ad1dec612b892e489cda98e1069542.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
59b745bb |
|
04-Jan-2023 |
Jens Axboe <axboe@kernel.dk> |
io_uring: move 'poll_multi_queue' bool in io_ring_ctx The cacheline section holding this variable has two gaps, where one is caused by this bool not packing well with structs. This causes it to blow into the next cacheline. Move the variable, shrinking io_ring_ctx by a full cacheline in size. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d34b1b0b |
|
06-Dec-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: use tw for putting rsrc Use task_work for completing rsrc removals, it'll be needed later for spinlock optimisations. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/cbba5d53a11ee6fc2194dacea262c1d733c8b529.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e6aeb272 |
|
06-Dec-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: complete all requests in task context This patch adds ctx->task_complete flag. If set, we'll complete all requests in the context of the original task. Note, this extends to completion CQE posting only but not io_kiocb cleanup / free, e.g. io-wq may free the requests in the free calllback. This flag will be used later for optimisations purposes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/21ece72953f76bb2e77659a72a14326227ab6460.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
931147dd |
|
24-Nov-2022 |
Dylan Yudaken <dylany@meta.com> |
io_uring: allow defer completion for aux posted cqes Multishot ops cannot use the compl_reqs list as the request must stay in the poll list, but that means they need to run each completion without benefiting from batching. Here introduce batching infrastructure for only small (ie 16 byte) CQEs. This restriction is ok because there are no use cases posting 32 byte CQEs. In the ring keep a batch of up to 16 posted results, and flush in the same way as compl_reqs. 16 was chosen through experimentation on a microbenchmark ([1]), as well as trying not to increase the size of the ring too much. This increases the size to 1472 bytes from 1216. [1]: https://github.com/DylanZA/liburing/commit/9ac66b36bcf4477bfafeff1c5f107896b7ae31cf Run with $ make -j && ./benchmark/reg.b -s 1 -t 2000 -r 10 Gives results: baseline 8309 k/s 8 18807 k/s 16 19338 k/s 32 20134 k/s Suggested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Dylan Yudaken <dylany@meta.com> Link: https://lore.kernel.org/r/20221124093559.3780686-5-dylany@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b7a81775 |
|
03-Oct-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: remove notif leftovers Notifications were killed but there is a couple of fields and struct declarations left, remove them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8df8877d677be5a2b43afd936d600e60105ea960.1664849941.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
21a091b9 |
|
30-Aug-2022 |
Dylan Yudaken <dylany@fb.com> |
io_uring: signal registered eventfd to process deferred task work Some workloads rely on a registered eventfd (via io_uring_register_eventfd(3)) in order to wake up and process the io_uring. In the case of a ring setup with IORING_SETUP_DEFER_TASKRUN, that eventfd also needs to be signalled when there are tasks to run. This changes an old behaviour which assumed 1 eventfd signal implied at least 1 CQE, however only when this new flag is set (and so old users will not notice). This should be expected with the IORING_SETUP_DEFER_TASKRUN flag as it is not guaranteed that every task will result in a CQE. Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220830125013.570060-7-dylany@fb.com [axboe: fold in call_rcu() serialization fix] Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c0e0d6ba |
|
30-Aug-2022 |
Dylan Yudaken <dylany@fb.com> |
io_uring: add IORING_SETUP_DEFER_TASKRUN Allow deferring async tasks until the user calls io_uring_enter(2) with the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at io_uring_setup time. This functionality requires that the later io_uring_enter will be called from the same submission task, and therefore restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also set. Being able to hand pick when tasks are run prevents the problem where there is current work to be done, however task work runs anyway. For example, a common workload would obtain a batch of CQEs, and process each one. Interrupting this to additional taskwork would add latency but not gain anything. If instead task work is deferred to just before more CQEs are obtained then no additional latency is added. The way this is implemented is by trying to keep task work local to a io_ring_ctx, rather than to the submission task. This is required, as the application will want to wake up only a single io_ring_ctx at a time to process work, and so the lists of work have to be kept separate. This has some other benefits like not having to check the task continually in handle_tw_list (and potentially unlocking/locking those), and reducing locks in the submit & process completions path. There are networking cases where using this option can reduce request latency by 50%. For example a contrived example using [1] where the client sends 2k data and receives the same data back while doing some system calls (to trigger task work) shows this reduction. The reason ends up being that if sending responses is delayed by processing task work, then the client side sits idle. Whereas reordering the sends first means that the client runs it's workload in parallel with the local task work. [1]: Using https://github.com/DylanZA/netbench/tree/defer_run Client: ./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000" Server: ./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100" Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
f2ccb5ae |
|
11-Aug-2022 |
Stefan Metzmacher <metze@samba.org> |
io_uring: make io_kiocb_to_cmd() typesafe We need to make sure (at build time) that struct io_cmd_data is not casted to a structure that's larger. Signed-off-by: Stefan Metzmacher <metze@samba.org> Link: https://lore.kernel.org/r/c024cdf25ae19fc0319d4180e2298bade8ed17b8.1660201408.git.metze@samba.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
14b146b6 |
|
27-Jul-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: notification completion optimisation We want to use all optimisations that we have for io_uring requests like completion batching, memory caching and more but for zc notifications. Fortunately, notification perfectly fit the request model so we can overlay them onto struct io_kiocb and use all the infratructure. Most of the fields of struct io_notif natively fits into io_kiocb, so we replace struct io_notif with struct io_kiocb carrying struct io_notif_data in the cmd cache line. Then we adapt io_alloc_notif() to use io_alloc_req()/io_alloc_req_refill(), and kill leftovers of hand coded caching. __io_notif_complete_tw() is converted to use io_uring's tw infra. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9e010125175e80baf51f0ca63bdc7cc6a4a9fa56.1658913593.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
eb4a299b |
|
12-Jul-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: cache struct io_notif kmalloc'ing struct io_notif is too expensive when done frequently, cache them as many other resources in io_uring. Keep two list, the first one is from where we're getting notifiers, it's protected by ->uring_lock. The second is protected by ->completion_lock, to which we queue released notifiers. Then we splice one list into another when needed. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9dec18f7fcbab9f4bd40b96e5ae158b119945230.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
eb42cebb |
|
12-Jul-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: add zc notification infrastructure Add internal part of send zerocopy notifications. There are two main structures, the first one is struct io_notif, which carries inside struct ubuf_info and maps 1:1 to it. io_uring will be binding a number of zerocopy send requests to it and ask to complete (aka flush) it. When flushed and all attached requests and skbs complete, it'll generate one and only one CQE. There are intended to be passed into the network layer as struct msghdr::msg_ubuf. The second concept is notification slots. The userspace will be able to register an array of slots and subsequently addressing them by the index in the array. Slots are independent of each other. Each slot can have only one notifier at a time (called active notifier) but many notifiers during the lifetime. When active, a notifier not going to post any completion but the userspace can attach requests to it by specifying the corresponding slot while issueing send zc requests. Eventually, the userspace will want to "flush" the notifier losing any way to attach new requests to it, however it can use the next atomatically added notifier of this slot or of any other slot. When the network layer is done with all enqueued skbs attached to a notifier and doesn't need the specified in them user data, the flushed notifier will post a CQE. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/3ecf54c31a85762bf679b0a432c9f43ecf7e61cc.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e70cb608 |
|
12-Jul-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: export io_put_task() Make io_put_task() available to non-core parts of io_uring, we'll need it for notification infrastructure. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/3686807d4c03b72e389947b0e8692d4d44334ef0.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
43e0bbbd |
|
07-Jul-2022 |
Jens Axboe <axboe@kernel.dk> |
io_uring: add netmsg cache For recvmsg/sendmsg, if they don't complete inline, we currently need to allocate a struct io_async_msghdr for each request. This is a somewhat large struct. Hook up sendmsg/recvmsg to use the io_alloc_cache. This reduces the alloc + free overhead considerably, yielding 4-5% of extra performance running netbench. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9731bc98 |
|
07-Jul-2022 |
Jens Axboe <axboe@kernel.dk> |
io_uring: impose max limit on apoll cache Caches like this tend to grow to the peak size, and then never get any smaller. Impose a max limit on the size, to prevent it from growing too big. A somewhat randomly chosen 512 is the max size we'll allow the cache to get. If a batch of frees come in and would bring it over that, we simply start kfree'ing the surplus. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9b797a37 |
|
07-Jul-2022 |
Jens Axboe <axboe@kernel.dk> |
io_uring: add abstraction around apoll cache In preparation for adding limits, and one more user, abstract out the core bits of the allocation+free cache. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6e73dffb |
|
25-Jun-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: let to set a range for file slot allocation From recently io_uring provides an option to allocate a file index for operation registering fixed files. However, it's utterly unusable with mixed approaches when for a part of files the userspace knows better where to place it, as it may race and users don't have any sane way to pick a slot and hoping it will not be taken. Let the userspace to register a range of fixed file slots in which the auto-allocation happens. The use case is splittting the fixed table in two parts, where on of them is used for auto-allocation and another for slot-specified operations. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/66ab0394e436f38437cf7c44676e1920d09687ad.1656154403.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3218e5d3 |
|
25-Jun-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: fuse fallback_node and normal tw node Now as both normal and fallback paths use llist, just keep one node head in struct io_task_work and kill off ->fallback_node. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d04ebde409f7b162fe247b361b4486b193293e46.1656153285.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
f88262e6 |
|
22-Jun-2022 |
Dylan Yudaken <dylany@fb.com> |
io_uring: lockless task list With networking use cases we see contention on the spinlock used to protect the task_list when multiple threads try and add completions at once. Instead we can use a lockless list, and assume that the first caller to add to the list is responsible for kicking off task work. Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220622134028.2013417-4-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
305bef98 |
|
19-Jun-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: hide eventfd assumptions in eventfd paths Some io_uring-eventfd users assume that there won't be spurious wakeups. That assumption has to be honoured by all io_cqring_ev_posted() callers, which is inconvenient and from time to time leads to problems but should be maintained to not break the userspace. Instead of making the callers track whether a CQE was posted or not, hide it inside io_eventfd_signal(). It saves ->cached_cq_tail it saw last time and triggers the eventfd only when ->cached_cq_tail changed since then. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0ffc66bae37a2513080b601e4370e147faaa72c5.1655684496.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d9dee430 |
|
18-Jun-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: remove ->flush_cqes optimisation It's not clear how widely used IOSQE_CQE_SKIP_SUCCESS is, and how often ->flush_cqes flag prevents from completion being flushed. Sometimes it's high level of concurrency that enables it at least for one CQE, but sometimes it doesn't save much because nobody waiting on the CQ. Remove ->flush_cqes flag and the optimisation, it should benefit the normal use case. Note, that there is no spurious eventfd problem with that as checks for spuriousness were incorporated into io_eventfd_signal(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/692e81eeddccc096f449a7960365fa7b4a18f8e6.1655637157.git.asml.silence@gmail.com [axboe: remove now dead state->flush_cqes variable] Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ad163a7e |
|
18-Jun-2022 |
Jens Axboe <axboe@kernel.dk> |
io_uring: move a few private types to local headers Commit 3a3d47fa9cfd ("io_uring: make io_uring_types.h public") moved a bunch of io_uring types to a kernel wide header, so we could make tracing a bit saner rather than pass in a ton of arguments. However, there are a few types in there that are not really needed to be system wide. Move the cancel data and mapped buffers back to the appropriate io_uring local headers. Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ab1c84d8 |
|
16-Jun-2022 |
Pavel Begunkov <asml.silence@gmail.com> |
io_uring: make io_uring_types.h public Move io_uring types to linux/include, need them public so tracing can see the definitions and we can clean trace/events/io_uring.h Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a15f12e8cb7289b2de0deaddcc7518d98a132d17.1655384063.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|