elfnote: mark all .note sections SHF_ALLOC

ELFNOTE_START allows callers to specify flags for .pushsection assembler
directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's
that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is
specified twice after preprocessing, once with "a" flag, once without.
Example:

.pushsection .note.Linux, "a", @note ;
.pushsection .note.Linux, "", @note ;

While GNU as allows this ordering, it warns for the opposite ordering,
making these directives position dependent. We'd prefer not to precisely
match this behavior in Clang's integrated assembler. Instead, the non
__ASSEMBLY__ definition of ELF_NOTE uses
__attribute__((section(".note.Linux"))) which is created with SHF_ALLOC,
so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C
and just always use "a" flag.

This allows Clang to assemble a working mainline (5.6) kernel via:
$ make CC=clang AS=clang

Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/913
Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.com
Debugged-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/elfnote.h: Replace elf.h with UAPI equivalent

The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.

Replace linux/elf.h with UAPI equivalent in elfnote.h to make the header
suitable for vDSO inclusion.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200320145351.32292-18-vincenzo.frascino@arm.com

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove __attribute_used__

Remove the deprecated __attribute_used__.

[Introduce __section in a few places to silence checkpatch /sam]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

use elfnote.h to generate vsyscall notes.

Use existing elfnote.h to generate vsyscall notes, rather than doing
it locally. Changes elfnote.h a bit to suit, since this is the first
asm user, and it wasn't quite right.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.com>

[PATCH] i386: Clean up ELF note generation

Three cleanups:

1: ELF notes are never mapped, so there's no need to have any access
flags in their phdr.

2: When generating them from asm, tell the assembler to use a SHT_NOTE
section type. There doesn't seem to be a way to do this from C.

3: Use ANSI rather than traditional cpp behaviour to stringify the
macro argument.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>

[PATCH] Translate asm version of ELFNOTE macro into preprocessor macro

I've come across some problems with the assembly version of the ELFNOTE
macro currently in -mm. (in
x86-put-note-sections-into-a-pt_note-segment-in-vmlinux.patch)

The first is that older gas does not support :varargs in .macro
definitions (in my testing 2.17 does while 2.15 does not, I don't know
when it became supported). The Changes file says binutils >= 2.12 so I
think we need to avoid using it. There are no other uses in mainline or
-mm. Old gas appears to just ignore it so you get "too many arguments"
type errors.

Secondly it seems that passing strings as arguments to assembler macros
is broken without varargs. It looks like they get unquoted or each
character is treated as a separate argument or something and this causes
all manner of grief. I think this is because of the use of -traditional
when compiling assembly files.

Therefore I have translated the assembler macro into a pre-processor
macro.

I added the desctype as a separate argument instead of including it with
the descdata as the previous version did since -traditional means the
ELFNOTE definition after the #else needs to have the same number of
arguments (I think so anyway, the -traditional CPP semantics are pretty
fscking strange!).

With this patch I am able to define elfnotes in assembly like this with
both old and new assemblers.

ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz, "linux")
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz, "2.6")
ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION, .asciz, "xen-3.0")
ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE, .long, __PAGE_OFFSET)

Which seems reasonable enough.

Signed-off-by: Ian Campbell <ian.campbell@xensource.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86: put .note.* sections into a PT_NOTE segment in vmlinux

This patch will pack any .note.* section into a PT_NOTE segment in the output
file.

To do this, we tell ld that we need a PT_NOTE segment. This requires us to
start explicitly mapping sections to segments, so we also need to explicitly
create PT_LOAD segments for text and data, and map the sections to them
appropriately. Fortunately, each section will default to its previous
section's segment, so it doesn't take many changes to vmlinux.lds.S.

This only changes i386 for now, but I presume the corresponding changes for
other architectures will be as simple.

This change also adds <linux/elfnote.h>, which defines C and Assembler macros
for actually creating ELF notes.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>