libceph: add CEPH_OSD_OP_ASSERT_VER support

...and record the user_version in the reply in a new field in
ceph_osd_request, so we can populate the assert_ver appropriately.
Shuffle the fields a bit too so that the new field fits in an
existing hole on x86_64.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph, rbd, ceph: "blacklist" -> "blocklist"

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: support for alloc hint flags

Allow indicating future I/O pattern via flags. This is supported since
Kraken (and bluestore persists flags together with expected_object_size
and expected_write_size).

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>

ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL

CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult
per-pool flags as well. Unfortunately the backwards compatibility here
is lacking:

- the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but
was guarded by require_osd_release >= RELEASE_LUMINOUS
- it was subsequently backported to luminous in v12.2.2, but that makes
no difference to clients that only check OSDMAP_FULL/NEARFULL because
require_osd_release is not client-facing -- it is for OSDs

Since all kernels are affected, the best we can do here is just start
checking both map flags and pool flags and send that to stable.

These checks are best effort, so take osdc->lock and look up pool flags
just once. Remove the FIXME, since filesystem quotas are checked above
and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches
its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set.

Cc: stable@vger.kernel.org
Reported-by: Yanhu Cao <gmayyyha@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Sage Weil <sage@redhat.com>

ceph: use copy-from2 op in copy_file_range

Instead of using the copy-from operation, switch copy_file_range to the
new copy-from2 operation, which allows to send the truncate_seq and
truncate_size parameters.

If an OSD does not support the copy-from2 operation it will return
-EOPNOTSUPP. In that case, the kernel client will stop trying to do
remote object copies for this fs client and will always use the generic
VFS copy_file_range.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: support the RADOS copy-from operation

Add support for performing remote object copies using the 'copy-from'
operation.

[ Add COPY_FROM to get_num_data_items(). ]

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: nuke startsync op

startsync is a no-op, has been for years. Remove it.

Link: http://tracker.ceph.com/issues/20604
Signed-off-by: Yanhu Cao <gmayyyha@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: make RECOVERY_DELETES feature create a new interval

This is needed so that the OSDs can regenerate the missing set at the
start of a new interval where support for recovery deletes changed.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>

libceph: respect RADOS_BACKOFF backoffs

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: bump CEPH_PG_MAX_SIZE to 32

... to accommodate potentially very wide EC pools. This increases the
size of a typical rbd ceph_osd_request by ~12% (from 1040 to 1168 bytes),
but I'd rather go future proof here.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>

libceph: support for sending notifies

Implement ceph_osdc_notify() for sending notifies.

Due to the fact that the current messenger can't do read-in into
pagelists (it can only do write-out from them), I had to go with a page
vector for a NOTIFY_COMPLETE payload, for now.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph, rbd: ceph_osd_linger_request, watch/notify v2

This adds support and switches rbd to a new, more reliable version of
watch/notify protocol. As with the OSD client update, this is mostly
about getting the right structures linked into the right places so that
reconnects are properly sent when needed. watch/notify v2 also
requires sending regular pings to the OSDs - send_linger_ping().

A major change from the old watch/notify implementation is the
introduction of ceph_osd_linger_request - linger requests no longer
piggy back on ceph_osd_request. ceph_osd_event has been merged into
ceph_osd_linger_request.

All the details are now hidden within libceph, the interface consists
of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack().
ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep
the lifetime management simple.

ceph_osdc_notify_ack() accepts an optional data payload, which is
relayed back to the notifier.

Portions of this patch are loosely based on work by Douglas Fuller
<dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: switch to calc_target(), part 2

The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target. Encoding now happens within ceph_osdc_start_request().

Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded. If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.

Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op(). While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: introduce ceph_osd_request_target, calc_target()

Introduce ceph_osd_request_target, containing all mapping-related
fields of ceph_osd_request and calc_target() for calculating mappings
and populating it.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: fix ceph_eversion encoding

eversion_t is version+epoch in userspace and is encoded in that order.
ceph_eversion is defined as epoch+version in rados.h, yet we memcpy it
in __send_request(). Reoder ceph_eversion fields.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

libceph: sync osd op definitions in rados.h

Bring in missing osd ops and strings, use macros to eliminate multiple
points of maintenance.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>

libceph: ceph_can_shift_osds(pool) and pool type defines

Bring in pg_pool_t::can_shift_osds() counterpart along with pool type
defines.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>

libceph: primary_affinity infrastructure

Add primary_affinity infrastructure. primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.

Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>

libceph: add support for CEPH_OSD_OP_SETALLOCHINT osd op

This is primarily for rbd's benefit and is supposed to combat
fragmentation:

"... knowing that rbd images have a 4m size, librbd can pass a hint
that will let the osd do the xfs allocation size ioctl on new files so
that they are allocated in 1m or 4m chunks. We've seen cases where
users with rbd workloads have very high levels of fragmentation in xfs
and this would mitigate that and probably have a pretty nice
performance benefit."

SETALLOCHINT is considered advisory, so our backwards compatibility
mechanism here is to set FAILOK flag for all SETALLOCHINT ops.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>

libceph: encode CEPH_OSD_OP_FLAG_* op flags

Encode ceph_osd_op::flags field so that it gets sent over the wire.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>

libceph: CEPH_OSD_FLAG_* enum update

Update CEPH_OSD_FLAG_* enum. (We need CEPH_OSD_FLAG_IGNORE_OVERLAY to
support tiering).

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

libceph: update osd request/reply encoding

Use the new version of the encoding for osd requests and replies. In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request. Update the rbd and fs/ceph users
appropriately.

The main changes are:
- we keep pointers into the request memory for fields we need to update
each time the request is sent out over the wire
- we keep information about the result in an array in the request struct
where the users can easily get at it.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

ceph: update support for PGID64, PGPOOL3, OSDENC protocol features

Support (and require) the PGID64, PGPOOL3, and OSDENC protocol features.
These have been present in ceph.git since v0.42, Feb 2012. Require these
features to simplify support; nobody is running older userspace.

Note that the new request and reply encoding is still not in place, so the new
code is not yet functional.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

libceph: rename ceph_pg -> ceph_pg_v1

Rename the old version this type to distinguish it from the new version.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

libceph: add ceph_osd_state_name()

Add the definition of ceph_osd_state_name(), to match its
counterpart in user space.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

libceph: update rados.h

Update most of "include/linux/ceph/rados.h" to match its user space
counterpart in "src/include/rados.h" in the ceph tree.

Almost everything that has changed is either:
- added or revised comments
- added definitions (therefore no real effect on existing code)
- defining the same value a different way (e.g., "1 << 0" vs "1")

The only exceptions are:
- The declaration of ceph_osd_state_name() was excluded; that
will be inserted in the next patch.
- ceph_osd_op_mode_read() and ceph_osd_op_mode_modify() are
defined differently, but they were never used in the kernel
- CEPH_OSD_FLAG_PEERSTAT is now CEPH_OSD_FLAG_PEERSTAT_OLD, but
that was never used in the kernel

Anything that was present in this file but not in its user space
counterpart was left intact here. I left the definitions of
EOLDSNAPC and EBLACKLISTED using numerical values here; I'm
not sure the right way to go with those.

This and the next two commits resolve:
http://tracker.ceph.com/issues/4164

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

rbd: get parent spec for version 2 images

Add support for getting the the information identifying the parent
image for rbd images that have them. The child image holds a
reference to its parent image specification structure. Create a new
entry "parent" in /sys/bus/rbd/image/N/ to report the identifying
information for the parent image, if any.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers

Convert #include "..." to #include <path/...> in kernel system headers.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

ceph: update common header files

This updates the common header files used by the different ceph
related modules. Specifically it adds definitions required by
the rbd watch/notify feature.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>

ceph: factor out libceph from Ceph file system

This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:

- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>