cifs: reinstate original behavior again for forceuid/forcegid

forceuid/forcegid should be enabled by default when uid=/gid= options are
specified, but commit 24e0a1eff9e2 ("cifs: switch to new mount api")
changed the behavior. Due to the change, a mounted share does not show
intentional uid/gid for files and directories even though uid=/gid=
options are specified since forceuid/forcegid are not enabled.

This patch reinstates original behavior that overrides uid/gid with
specified uid/gid by the options.

Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Signed-off-by: Takayuki Nagata <tnagata@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb3: fix broken reconnect when password changing on the server by allowing password rotation

There are various use cases that are becoming more common in which password
changes are scheduled on a server(s) periodically but the clients connected
to this server need to stay connected (even in the face of brief network
reconnects) due to mounts which can not be easily unmounted and mounted at
will, and servers that do password rotation do not always have the ability
to tell the clients exactly when to the new password will be effective,
so add support for an alt password ("password2=") on mount (and also
remount) so that we can anticipate the upcoming change to the server
without risking breaking existing mounts.

An alternative would have been to use the kernel keyring for this but the
processes doing the reconnect do not have access to the keyring but do
have access to the ses structure.

Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex

Serialise cifs_construct_tcon() with cifs_mount_mutex to handle
parallel mounts that may end up reusing the session and tcon created
by it.

Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: negotiate compression algorithms

Change "compress=" mount option to a boolean flag, that, if set,
will enable negotiating compression algorithms with the server.

Do not de/compress anything for now.

Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: add support for WSL reparse points

Add support for creating special files via WSL reparse points when
using 'reparse=wsl' mount option. They're faster than NFS reparse
points because they don't require extra roundtrips to figure out what
->d_type a specific dirent is as such information is already stored in
query dir responses and then making getdents() calls faster.

Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: introduce reparse mount option

Allow the user to create special files and symlinks by choosing
between WSL and NFS reparse points via 'reparse={nfs,wsl}' mount
options. If unset or 'reparse=default', the client will default to
creating them via NFS reparse points.

Creating WSL reparse points isn't supported yet, so simply return
error when attempting to mount with 'reparse=wsl' for now.

Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: allow changing password during remount

There are cases where a session is disconnected and password has changed
on the server (or expired) for this user and this currently can not
be fixed without unmount and mounting again. This patch allows
remount to change the password (for the non Kerberos case, Kerberos
ticket refresh is handled differently) when the session is disconnected
and the user can not reconnect due to still using old password.

Future patches should also allow us to setup the keyring (cifscreds)
to have an "alternate password" so we would be able to change
the password before the session drops (without the risk of races
between when the password changes and the disconnect occurs -
ie cases where the old password is still needed because the new
password has not fully rolled out to all servers yet).

Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: Fix regression in writes when non-standard maximum write size negotiated

The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096). When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.

This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.

Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096 (and round down), also add a change where we
round down the maximum write size if the server negotiates a value
that is not a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero).

Reported-by: R. Diez" <rdiez-2006@rd10.de>
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Suggested-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Acked-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # v6.3+
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb3: clarify mount warning

When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.

Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: new mount option called retrans

We have several places in the code where we treat the
error -EAGAIN very differently. Some code retry for
arbitrary number of times.

Introducing this new mount option named "retrans", so
that all these handlers of -EAGAIN can retry a fixed
number of times. This applies only to soft mounts.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

fs/smb/client: Reset password pointer to NULL

Forget to reset ctx->password to NULL will lead to bug like double free

Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb3: allow controlling maximum number of cached directories

Allow adjusting the maximum number of cached directories per share
(defaults to 16) via mount parm "max_cached_dirs"

Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: fix null auth

Commit abdb1742a312 removed code that clears ctx->username when sec=none, so attempting
to mount with '-o sec=none' now fails with -EACCES. Fix it by adding that logic to the
parsing of the 'sec' option, as well as checking if the mount is using null auth before
setting the username when parsing the 'user' option.

Fixes: abdb1742a312 ("cifs: get rid of mount options string parsing")
Cc: stable@vger.kernel.org
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: fix parsing of source mount option

Handle trailing and leading separators when parsing UNC and prefix
paths in smb3_parse_devname(). Then, store the sanitised paths in
smb3_fs_context::source.

This fixes the following cases

$ mount //srv/share// /mnt/1 -o ...
$ cat /mnt/1/d0/f0
cat: /mnt/1/d0/f0: Invalid argument

The -EINVAL was returned because the client sent SMB2_CREATE "\\d0\f0"
rather than SMB2_CREATE "\d0\f0".

$ mount //srv//share /mnt/1 -o ...
mount: Invalid argument

The -EINVAL was returned correctly although the client only realised
it after sending a couple of bad requests rather than bailing out
earlier when parsing mount options.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: move client and server files to common directory fs/smb

Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:

fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>