kernfs: convert to new timestamp accessors

Convert to using the new inode timestamp accessor functions.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-47-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

kernfs: move kernfs_xattr_handlers to .rodata

This makes it harder for accidental or malicious changes to
kernfs_xattr_handlers at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-18-wedsonaf@gmail.com
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

xattr: simple_xattr_set() return old_xattr to be freed

tmpfs wants to support limited user extended attributes, but kernfs
(or cgroupfs, the only kernfs with KERNFS_ROOT_SUPPORT_USER_XATTR)
already supports user extended attributes through simple xattrs: but
limited by a policy (128KiB per inode) too liberal to be used on tmpfs.

To allow a different limiting policy for tmpfs, without affecting the
policy for kernfs, change simple_xattr_set() to return the replaced or
removed xattr (if any), leaving the caller to update their accounting
then free the xattr (by simple_xattr_free(), renamed from the static
free_simple_xattr()).

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <158c6585-2aa7-d4aa-90ff-f7c3f8fe407c@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

fs: pass the request_mask to generic_fillattr

generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.

Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.

Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

kernfs: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-54-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

kernfs: Introduce separate rwsem to protect inode attributes.

Right now a global per-fs rwsem (kernfs_rwsem) synchronizes multiple
kernfs operations. On a large system with few hundred CPUs and few
hundred applications simultaneoulsy trying to access sysfs, this
results in multiple sys_open(s) contending on kernfs_rwsem via
kernfs_iop_permission and kernfs_dop_revalidate.

For example on a system with 384 cores, if I run 200 instances of an
application which is mostly executing the following loop:

for (int loop = 0; loop <100 ; loop++)
{
for (int port_num = 1; port_num < 2; port_num++)
{
for (int gid_index = 0; gid_index < 254; gid_index++ )
{
char ret_buf[64], ret_buf_lo[64];
char gid_file_path[1024];

int ret_len;
int ret_fd;
ssize_t ret_rd;

ub4 i, saved_errno;

memset(ret_buf, 0, sizeof(ret_buf));
memset(gid_file_path, 0, sizeof(gid_file_path));

ret_len = snprintf(gid_file_path, sizeof(gid_file_path),
"/sys/class/infiniband/%s/ports/%d/gids/%d",
dev_name,
port_num,
gid_index);

ret_fd = open(gid_file_path, O_RDONLY | O_CLOEXEC);
if (ret_fd < 0)
{
printf("Failed to open %s\n", gid_file_path);
continue;
}

/* Read the GID */
ret_rd = read(ret_fd, ret_buf, 40);

if (ret_rd == -1)
{
printf("Failed to read from file %s, errno: %u\n",
gid_file_path, saved_errno);

continue;
}

close(ret_fd);
}
}

I see contention around kernfs_rwsem as follows:

path_openat
|
|----link_path_walk.part.0.constprop.0
| |
| |--49.92%--inode_permission
| | |
| | --48.69%--kernfs_iop_permission
| | |
| | |--18.16%--down_read
| | |
| | |--15.38%--up_read
| | |
| | --14.58%--_raw_spin_lock
| | |
| | -----
| |
| |--29.08%--walk_component
| | |
| | --29.02%--lookup_fast
| | |
| | |--24.26%--kernfs_dop_revalidate
| | | |
| | | |--14.97%--down_read
| | | |
| | | --9.01%--up_read
| | |
| | --4.74%--__d_lookup
| | |
| | --4.64%--_raw_spin_lock
| | |
| | ----

Having a separate per-fs rwsem to protect kernfs inode attributes,
will avoid the above mentioned contention and result in better
performance as can bee seen below:

path_openat
|
|----link_path_walk.part.0.constprop.0
| |
| |
| |--27.06%--inode_permission
| | |
| | --25.84%--kernfs_iop_permission
| | |
| | |--9.29%--up_read
| | |
| | |--8.19%--down_read
| | |
| | --7.89%--_raw_spin_lock
| | |
| | ----
| |
| |--22.42%--walk_component
| | |
| | --22.36%--lookup_fast
| | |
| | |--16.07%--__d_lookup
| | | |
| | | --16.01%--_raw_spin_lock
| | | |
| | | ----
| | |
| | --6.28%--kernfs_dop_revalidate
| | |
| | |--3.76%--down_read
| | |
| | --2.26%--up_read

As can be seen from the above data the overhead due to both
kerfs_iop_permission and kernfs_dop_revalidate have gone down and
this also reduces overall run time of the earlier mentioned loop.

Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Link: https://lore.kernel.org/r/20230309110932.2889010-2-imran.f.khan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: port xattr to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->permission() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->getattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->setattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

kernfs: fix all kernel-doc warnings and multiple typos

Fix kernel-doc warnings. Many of these are about a function's
return value, so use the kernel-doc Return: format to fix those

Use % prefix on numeric constant values.

dir.c: fix typos/spellos
file.c fix typo: s/taret/target/

Fix all of these kernel-doc warnings:

dir.c:305: warning: missing initial short description on line:
* kernfs_name_hash

dir.c:137: warning: No description found for return value of 'kernfs_path_from_node_locked'
dir.c:196: warning: No description found for return value of 'kernfs_name'
dir.c:224: warning: No description found for return value of 'kernfs_path_from_node'
dir.c:292: warning: No description found for return value of 'kernfs_get_parent'
dir.c:312: warning: No description found for return value of 'kernfs_name_hash'
dir.c:404: warning: No description found for return value of 'kernfs_unlink_sibling'
dir.c:588: warning: No description found for return value of 'kernfs_node_from_dentry'
dir.c:806: warning: No description found for return value of 'kernfs_find_ns'
dir.c:879: warning: No description found for return value of 'kernfs_find_and_get_ns'
dir.c:904: warning: No description found for return value of 'kernfs_walk_and_get_ns'
dir.c:927: warning: No description found for return value of 'kernfs_create_root'
dir.c:996: warning: No description found for return value of 'kernfs_root_to_node'
dir.c:1016: warning: No description found for return value of 'kernfs_create_dir_ns'
dir.c:1048: warning: No description found for return value of 'kernfs_create_empty_dir'
dir.c:1306: warning: No description found for return value of 'kernfs_next_descendant_post'
dir.c:1568: warning: No description found for return value of 'kernfs_remove_self'
dir.c:1630: warning: No description found for return value of 'kernfs_remove_by_name_ns'
dir.c:1667: warning: No description found for return value of 'kernfs_rename_ns'

file.c:66: warning: No description found for return value of 'of_on'
file.c:88: warning: No description found for return value of 'kernfs_deref_open_node_locked'
file.c:1036: warning: No description found for return value of '__kernfs_create_file'

inode.c:100: warning: No description found for return value of 'kernfs_setattr'

mount.c:160: warning: No description found for return value of 'kernfs_root_from_sb'
mount.c:198: warning: No description found for return value of 'kernfs_node_dentry'
mount.c:302: warning: No description found for return value of 'kernfs_super_ns'
mount.c:318: warning: No description found for return value of 'kernfs_get_tree'

symlink.c:28: warning: No description found for return value of 'kernfs_create_link'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221112031456.22980-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: dont take i_lock on inode attr read

The kernfs write lock is held when the kernfs node inode attributes
are updated. Therefore, when either kernfs_iop_getattr() or
kernfs_iop_permission() are called the kernfs node inode attributes
won't change.

Consequently concurrent kernfs_refresh_inode() calls always copy the
same values from the kernfs node.

So there's no need to take the inode i_lock to get consistent values
for generic_fillattr() and generic_permission(), the kernfs read lock
is sufficient.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/166606036215.13363.1288735296954908554.stgit@donald.themaw.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: switch global kernfs_rwsem lock to per-fs lock

The kernfs implementation has big lock granularity(kernfs_rwsem) so
every kernfs-based(e.g., sysfs, cgroup) fs are able to compete the
lock. It makes trouble for some cases to wait the global lock
for a long time even though they are totally independent contexts
each other.

A general example is process A goes under direct reclaim with holding
the lock when it accessed the file in sysfs and process B is waiting
the lock with exclusive mode and then process C is waiting the lock
until process B could finish the job after it gets the lock from
process A.

This patch switches the global kernfs_rwsem to per-fs lock, which
put the rwsem into kernfs_root.

Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20211118230008.2679780-1-minchan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: use i_lock to protect concurrent inode updates

The inode operations .permission() and .getattr() use the kernfs node
write lock but all that's needed is the read lock to protect against
partial updates of these kernfs node fields which are all done under
the write lock.

And .permission() is called frequently during path walks and can cause
quite a bit of contention between kernfs node operations and path
walks when the number of concurrent walks is high.

To change kernfs_iop_getattr() and kernfs_iop_permission() to take
the rw sem read lock instead of the write lock an additional lock is
needed to protect against multiple processes concurrently updating
the inode attributes and link count in kernfs_refresh_inode().

The inode i_lock seems like the sensible thing to use to protect these
inode attribute updates so use it in kernfs_refresh_inode().

The last hunk in the patch, applied to kernfs_fill_super(), is possibly
not needed but taking the lock was present originally. I prefer to
continue to take it to protect against a partial update of the source
kernfs fields during the call to kernfs_refresh_inode() made by
kernfs_get_inode().

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642771474.63632.16295959115893904470.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: switch kernfs to use an rwsem

The kernfs global lock restricts the ability to perform kernfs node
lookup operations in parallel during path walks.

Change the kernfs mutex to an rwsem so that, when opportunity arises,
node searches can be done in parallel with path walk lookups.

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/162642770946.63632.2218304587223241374.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: move ramfs_aops to libfs

Move the ramfs aops to libfs and reuse them for kernfs and configfs.
Thosw two did not wire up ->set_page_dirty before and now get
__set_page_dirty_no_writeback, which is the right one for no-writeback
address_space usage.

Drop the now unused exports of the libfs helpers only used for ramfs-style
pagecache usage.

Link: https://lkml.kernel.org/r/20210614061512.3966143-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: make helpers idmap mount aware

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

stat: handle idmapped mounts

The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

acl: handle idmapped mounts

The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.

The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.

In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.

Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

attr: handle idmapped mounts

When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

namei: make permission helpers idmapped mount aware

The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

kernfs: Add option to enable user xattrs

User extended attributes are useful as metadata storage for kernfs
consumers like cgroups. Especially in the case of cgroups, it is useful
to have a central metadata store that multiple processes/services can
use to coordinate actions.

A concrete example is for userspace out of memory killers. We want to
let delegated cgroup subtree owners (running as non-root) to be able to
say "please avoid killing this cgroup". This is especially important for
desktop linux as delegated subtrees owners are less likely to run as
root.

This patch introduces a new flag, KERNFS_ROOT_SUPPORT_USER_XATTR, that
lets kernfs consumers enable user xattr support. An initial limit of 128
entries or 128KB -- whichever is hit first -- is placed per cgroup
because xattrs come from kernel memory and we don't want to let
unprivileged users accidentally eat up too much kernel memory.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

kernfs: Add removed_size out param for simple_xattr_set

This helps set up size accounting in the next commit. Without this out
param, it's difficult to find out the removed xattr size without taking
a lock for longer and walking the xattr linked list twice.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

kernfs: don't bother with timestamp truncation

kernfs users are not going to have limited
range or granularity anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

kernfs: convert kernfs_node->id from union kernfs_node_id to u64

kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value. I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to. Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.

This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper. Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen. This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.

This patch doesn't make any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>

timestamp_truncate: Replace users of timespec64_trunc

Update the inode timestamp updates to use timestamp_truncate()
instead of timespec64_trunc().

The change was mostly generated by the following coccinelle
script.

virtual context
virtual patch

@r1 depends on patch forall@
struct inode *inode;
identifier i_xtime =~ "^i_[acm]time$";
expression e;
@@

inode->i_xtime =
- timespec64_trunc(
+ timestamp_truncate(
...,
- e);
+ inode);

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: adrian.hunter@intel.com
Cc: dedekind1@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: hch@lst.de
Cc: jaegeuk@kernel.org
Cc: jlbec@evilplan.org
Cc: richard@nod.at
Cc: tj@kernel.org
Cc: yuchao0@huawei.com
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: linux-mtd@lists.infradead.org

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428

Based on 1 normalized pattern(s):

this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: fix xattr name handling in LSM helpers

The implementation of kernfs_security_xattr_*() helpers reuses the
kernfs_node_xattr_*() functions, which take the suffix of the xattr name
and extract full xattr name from it using xattr_full_name(). However,
this function relies on the fact that the suffix passed to xattr
handlers from VFS is always constructed from the full name by just
incerementing the pointer. This doesn't necessarily hold for the callers
of kernfs_security_xattr_*(), so their usage will easily lead to
out-of-bounds access.

Fix this by moving the xattr name reconstruction to the VFS xattr
handlers and replacing the kernfs_security_xattr_*() helpers with more
general kernfs_xattr_*() helpers that take full xattr name and allow
accessing all kernfs node's xattrs.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: b230d5aba2d1 ("LSM: add new hook for kernfs node initialization")
Fixes: ec882da5cda9 ("selinux: implement the kernfs_init_security hook")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: add new hook for kernfs node initialization

This patch introduces a new security hook that is intended for
initializing the security data for newly created kernfs nodes, which
provide a way of storing a non-default security context, but need to
operate independently from mounts (and therefore may not have an
associated inode at the moment of creation).

The main motivation is to allow kernfs nodes to inherit the context of
the parent under SELinux, similar to the behavior of
security_inode_init_security(). Other LSMs may implement their own logic
for handling the creation of new nodes.

This patch also adds helper functions to <linux/kernfs.h> for
getting/setting security xattrs of a kernfs node so that LSMs hooks are
able to do their job. Other important attributes should be accessible
direcly in the kernfs_node fields (in case there is need for more, then
new helpers should be added to kernfs.h along with the patch that needs
them).

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: more manual merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

kernfs: use simple_xattrs for security attributes

Replace the special handling of security xattrs with simple_xattrs, as
is already done for the trusted xattrs. This simplifies the code and
allows LSMs to use more than just a single xattr to do their business.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: manual merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

kernfs: do not alloc iattrs in kernfs_xattr_get

This is a read-only operation, so we can simply return -ENODATA if
kn->iattr is NULL.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: minor merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

kernfs: clean up struct kernfs_iattrs

Right now, kernfs_iattrs embeds the whole struct iattr, even though it
doesn't really use half of its fields... This both leads to wasting
space and makes the code look awkward. Let's just list the few fields
we need directly in struct kernfs_iattrs.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: merged a number of chunks manually due to fuzz]
Signed-off-by: Paul Moore <paul@paul-moore.com>

kernfs: Allocating memory for kernfs_iattrs with kmem_cache.

Creating a new cache for kernfs_iattrs.
Currently, memory is allocated with kzalloc() which
always gives aligned memory. On ARM, this is 64 byte aligned.
To avoid the wastage of memory in aligning the size requested,
a new cache for kernfs_iattrs is created.

Size of struct kernfs_iattrs is 80 Bytes.
On ARM, it will come in kmalloc-128 slab.
and it will come in kmalloc-192 slab if debug info is enabled.
Extra bytes taken 48 bytes.

Total number of objects created : 4096
Total saving = 48*4096 = 192 KB

After creating new slab(When debug info is enabled) :
sh-3.2# cat /proc/slabinfo
...
kernfs_iattrs_cache 4069 4096 128 32 1 : tunables 0 0 0 : slabdata 128 128 0
...

All testing has been done on ARM target.

Signed-off-by: Ayush Mittal <ayush.m@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: allow creating kernfs objects with arbitrary uid/gid

This change allows creating kernfs files and directories with arbitrary
uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending
kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments.
The "simple" kernfs_create_file() and kernfs_create_dir() are left alone
and always create objects belonging to the global root.

When creating symlinks ownership (uid/gid) is taken from the target kernfs
object.

Co-Developed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vfs: change inode times to use struct timespec64

struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
current_time ( ... )
{
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
...
- return timespec_trunc(
+ return timespec64_trunc(
... );
}

@ depends on patch @
identifier xtime;
@@
struct \( iattr \| inode \| kstat \) {
...
- struct timespec xtime;
+ struct timespec64 xtime;
...
}

@ depends on patch @
identifier t;
@@
struct inode_operations {
...
int (*update_time) (...,
- struct timespec t,
+ struct timespec64 t,
...);
...
}

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ;
|
node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
stat->xtime = node2->i_xtime1;
|
stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>

kernfs: introduce kernfs_node_id

inode number and generation can identify a kernfs node. We are going to
export the identification by exportfs operations, so put ino and
generation into a separate structure. It's convenient when later patches
use the identification.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

kernfs: don't set dentry->d_fsdata

When working on adding exportfs operations in kernfs, I found it's hard
to initialize dentry->d_fsdata in the exportfs operations. Looks there
is no way to do it without race condition. Look at the kernfs code
closely, there is no point to set dentry->d_fsdata. inode->i_private
already points to kernfs_node, and we can get inode from a dentry. So
this patch just delete the d_fsdata usage.

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

kernfs: implement i_generation

Set i_generation for kernfs inode. This is required to implement
exportfs operations. The generation is 32-bit, so it's possible the
generation wraps up and we find stale files. To reduce the posssibility,
we don't reuse inode numer immediately. When the inode number allocation
wraps, we increase generation number. In this way generation/inode
number consist of a 64-bit number which is unlikely duplicated. This
does make the idr tree more sparse and waste some memory. Since idr
manages 32-bit keys, idr uses a 6-level radix tree, each level covers 6
bits of the key. In a 100k inode kernfs, the worst case will have around
300k radix tree node. Each node is 576bytes, so the tree will use about
~150M memory. Sounds not too bad, if this really is a problem, we should
find better data structure.

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

statx: Add a system call to make enhanced file info available

Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included. The
following have been included:

(1) Make the fields a consistent size on all arches and make them large.

(2) Spare space, request flags and information flags are provided for
future expansion.

(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).

(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).

This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].

(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).

(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].

Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.

(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).

(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].

(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].

(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...

(This requires a separate system call - I have an fsinfo() call idea
for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].

(Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].

(Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).

(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].

(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.

(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.

(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data. This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};

struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};

The defined bits in request_mask and stx_mask are:

STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:

STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

STATX_ATTR_AUTOMOUNT Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

(0) stx_dev_*, stx_blksize.

These are local system information and are always available.

(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.

These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.

If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.

If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.

Note that there are instances where the type might not be valid, for
instance Windows reparse points.

(2) stx_rdev_*.

This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.

(3) stx_btime.

Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

kernfs: Declare two local data structures static

This was spotted by the 'sparse' static checker.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: Remove {get,set,remove}xattr inode operations

These inode operations are no longer used; remove them.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

kernfs: Switch to generic xattr handlers

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: Replace current_fs_time() with current_time()

current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.

Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: Give dentry to inode_change_ok() instead of inode

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

switch ->setxattr() to passing dentry and inode separately

smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.

Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

->getxattr(): pass dentry and inode as separate arguments

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: kernfs: Replace CURRENT_TIME by current_fs_time()

This is in preparation for the series that transitions
filesystem timestamps to use 64 bit time and hence make
them y2038 safe.

CURRENT_TIME macro will be deleted before merging the
aforementioned series.

Use current_fs_time() instead of CURRENT_TIME for inode
timestamps.

struct kernfs_node is associated with a sysfs file/ directory.
Truncate the values to appropriate time granularity when
writing to inode timestamps of the files.

ktime_get_real_ts() is used to obtain times for
struct kernfs_iattrs. Since these times are later assigned to
inode times using timespec_truncate() for all filesystem based
operations, we can save the supers list traversal time here by
using ktime_get_real_ts() directly.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tmpfs: listxattr should include POSIX ACL xattrs

When a file on tmpfs has an ACL or a Default ACL, listxattr should include the
corresponding xattr name.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

tmpfs: Use xattr handler infrastructure

Use the VFS xattr handler infrastructure and get rid of similar code in
the filesystem. For implementing shmem_xattr_handler_set, we need a
version of simple_xattr_set which removes the attribute when value is
NULL. Use this to implement kernfs_iop_removexattr as well.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

kernfs: Add support for always empty directories.

Add a new function kernfs_create_empty_dir that can be used to create
directory that can not be modified.

Update the code to use make_empty_dir_inode when reporting a
permanently empty directory to the vfs.

Update the code to not allow adding to permanently empty directories.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

VFS: normal filesystems (and lustre): d_inode() annotations

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: remove mapping->backing_dev_info

Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>

fs: deduplicate noop_backing_dev_info

hugetlbfs, kernfs and dlmfs can simply use noop_backing_dev_info instead
of creating a local duplicate.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

kernfs: protect lazy kernfs_iattrs allocation with mutex

kernfs_iattrs is allocated lazily when operations which require it
take place; unfortunately, the lazy allocation and returning weren't
properly synchronized and when there are multiple concurrent
operations, it might end up returning kernfs_iattrs which hasn't
finished initialization yet or different copies to different callers.

Fix it by synchronizing with a mutex. This can be smarter with memory
barriers but let's go there if it actually turns out to be necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/533ABA32.9080602@oracle.com
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # 3.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm + fs: store shadow entries in page cache

Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernfs: s/sysfs/kernfs/ in internal functions and whatever is left

kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.

This patch performs the following renames.

* s/sysfs_*()/kernfs_*()/ in all internal functions
* s/sysfs/kernfs/ in internal strings, comments and whatever is remaining
* Uniformly rename various vfs operations so that they're consistently
named and distinguishable.

This patch is strictly rename only and doesn't introduce any
functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: s/sysfs/kernfs/ in global variables

kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.

This patch performs the following renames.

* s/sysfs_mutex/kernfs_mutex/
* s/sysfs_dentry_ops/kernfs_dops/
* s/sysfs_dir_operations/kernfs_dir_fops/
* s/sysfs_dir_inode_operations/kernfs_dir_iops/
* s/kernfs_file_operations/kernfs_file_fops/ - renamed for consistency
* s/sysfs_symlink_inode_operations/kernfs_symlink_iops/
* s/sysfs_aops/kernfs_aops/
* s/sysfs_backing_dev_info/kernfs_bdi/
* s/sysfs_inode_operations/kernfs_iops/
* s/sysfs_dir_cachep/kernfs_node_cache/
* s/sysfs_ops/kernfs_sops/

This patch is strictly rename only and doesn't introduce any
functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: s/sysfs/kernfs/ in constants

kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.

This patch performs the following renames.

* s/SYSFS_DIR/KERNFS_DIR/
* s/SYSFS_KOBJ_ATTR/KERNFS_FILE/
* s/SYSFS_KOBJ_LINK/KERNFS_LINK/
* s/SYSFS_{TYPE_FLAGS}/KERNFS_{TYPE_FLAGS}/
* s/SYSFS_FLAG_{FLAG}/KERNFS_{FLAG}/
* s/sysfs_type()/kernfs_type()/
* s/SD_DEACTIVATED_BIAS/KN_DEACTIVATED_BIAS/

This patch is strictly rename only and doesn't introduce any
functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: s/sysfs/kernfs/ in various data structures

kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.

This patch performs the following renames.

* s/sysfs_open_dirent/kernfs_open_node/
* s/sysfs_open_file/kernfs_open_file/
* s/sysfs_inode_attrs/kernfs_iattrs/
* s/sysfs_addrm_cxt/kernfs_addrm_cxt/
* s/sysfs_super_info/kernfs_super_info/
* s/sysfs_info()/kernfs_info()/
* s/sysfs_open_dirent_lock/kernfs_open_node_lock/
* s/sysfs_open_file_mutex/kernfs_open_file_mutex/
* s/sysfs_of()/kernfs_of()/

This patch is strictly rename only and doesn't introduce any
functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: drop s_ prefix from kernfs_node members

kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.

s_ prefix for kernfs members is used inconsistently and a misnomer
now. It's not like kernfs_node is used widely across the kernel
making the ability to grep for the members particularly useful. Let's
just drop the prefix.

This patch is strictly rename only and doesn't introduce any
functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordingly

kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.

This patch performs the following renames.

* s/sysfs_elem_dir/kernfs_elem_dir/
* s/sysfs_elem_symlink/kernfs_elem_symlink/
* s/sysfs_elem_attr/kernfs_elem_file/
* s/sysfs_dirent/kernfs_node/
* s/sd/kn/ in kernfs proper
* s/parent_sd/parent/
* s/target_sd/target/
* s/dir_sd/parent/
* s/to_sysfs_dirent()/rb_to_kn()/
* misc renames of local vars when they conflict with the above

Because md, mic and gpio dig into sysfs details, this patch ends up
modifying them. All are sysfs_dirent renames and trivial. While we
can avoid these by introducing a dummy wrapping struct sysfs_dirent
around kernfs_node, given the limited usage outside kernfs and sysfs
proper, I don't think such workaround is called for.

This patch is strictly rename only and doesn't introduce any
functional difference.

- mic / gpio renames were missing. Spotted by kbuild test robot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: implement "trusted.*" xattr support

kernfs inherited "security.*" xattr support from sysfs. This patch
extends xattr support to "trusted.*" using simple_xattr_*(). As
trusted xattrs are restricted to CAP_SYS_ADMIN, simple_xattr_*() which
uses kernel memory for storage shouldn't be problematic.

Note that the existing "security.*" support doesn't implement
get/remove/list and the this patch only implements those ops for
"trusted.*". We probably want to extend those ops to include support
for "security.*".

This patch will allow using kernfs from cgroup which requires
"trusted.*" xattr support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: update sysfs_init_inode_attrs()

sysfs_init_inode_attrs() is a bit clumsy to use requiring the caller
to check whether @sd->s_iattr is already set or not. Rename it to
sysfs_inode_attrs(), update it to check whether @sd->s_iattr is
already initialized before trying to initialize it and return
@sd->s_iattr. This simplifies the callers.

While at it,

* Rename struct sysfs_inode_attrs pointer variables to "attrs". As
kernfs no longer deals with "struct attribute", this isn't confusing
and makes it easier to distinguish from struct iattr pointers.

* A new field will be added to sysfs_inode_attrs. Reindent in
preparation.

This patch doesn't introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs, kernfs: prepare mount path for kernfs

We're in the process of separating out core sysfs functionality into
kernfs which will deal with sysfs_dirents directly. This patch
rearranges mount path so that the kernfs and sysfs parts are separate.

* As sysfs_super_info won't be visible outside kernfs proper,
kernfs_super_ns() is added to allow kernfs users to access a
super_block's namespace tag.

* Generic mount operation is separated out into kernfs_mount_ns().
sysfs_mount() now just performs sysfs-specific permission check,
acquires namespace tag, and invokes kernfs_mount_ns().

* Generic superblock release is separated out into kernfs_kill_sb()
which can be used directly as file_system_type->kill_sb(). As sysfs
needs to put the namespace tag, sysfs_kill_sb() wraps
kernfs_kill_sb() with ns tag put.

* sysfs_dir_cachep init and sysfs_inode_init() are separated out into
kernfs_init(). kernfs_init() uses only small amount of memory and
trying to handle and propagate kernfs_init() failure doesn't make
much sense. Use SLAB_PANIC for sysfs_dir_cachep and make
sysfs_inode_init() panic on failure.

After this change, kernfs_init() should be called before
sysfs_init(), fs/namespace.c::mnt_init() modified accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs, kernfs: move inode code to fs/kernfs/inode.c

There's nothing sysfs-specific in fs/sysfs/inode.c. Move everything
in it to fs/kernfs/inode.c. The respective declarations in
fs/sysfs/sysfs.h are moved to fs/kernfs/kernfs-internal.h.

This is pure relocation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs, kernfs: add skeletons for kernfs

Core sysfs implementation will be separated into kernfs so that it can
be used by other non-kobject users.

This patch creates fs/kernfs/ directory and makes boilerplate changes.
kernfs interface will be directly based on sysfs_dirent and its
forward declaration is moved to include/linux/kernfs.h which is
included from include/linux/sysfs.h. sysfs core implementation will
be gradually separated out and moved to kernfs.

This patch doesn't introduce any functional changes.

v2: mount.c added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>