#
22650a99 |
|
26-Mar-2024 |
Christian Brauner <brauner@kernel.org> |
fs,block: yield devices early Currently a device is only really released once the umount returns to userspace due to how file closing works. That ultimately could cause an old umount assumption to be violated that concurrent umount and mount don't fail. So an exclusively held device with a temporary holder should be yielded before the filesystem is gone. Add a helper that allows callers to do that. This also allows us to remove the two holder ops that Linus wasn't excited about. Link: https://lore.kernel.org/r/20240326-vfs-bdev-end_holder-v1-1-20af85202918@kernel.org Fixes: f3a608827d1f ("bdev: open block device as files") # mainline only Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
ac4e78bd |
|
23-Jan-2024 |
Christian Brauner <brauner@kernel.org> |
jfs: port block device access to file Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-23-adbd023e19cc@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
f3a60882 |
|
08-Feb-2024 |
Christian Brauner <brauner@kernel.org> |
bdev: open block device as files Add two new helpers to allow opening block devices as files. This is not the final infrastructure. This still opens the block device before opening a struct a file. Until we have removed all references to struct bdev_handle we can't switch the order: * Introduce blk_to_file_flags() to translate from block specific to flags usable to pen a new file. * Introduce bdev_file_open_by_{dev,path}(). * Introduce temporary sb_bdev_handle() helper to retrieve a struct bdev_handle from a block device file and update places that directly reference struct bdev_handle to rely on it. * Don't count block device openes against the number of open files. A bdev_file_open_by_{dev,path}() file is never installed into any file descriptor table. One idea that came to mind was to use kernel_tmpfile_open() which would require us to pass a path and it would then call do_dentry_open() going through the regular fops->open::blkdev_open() path. But then we're back to the problem of routing block specific flags such as BLK_OPEN_RESTRICT_WRITES through the open path and would have to waste FMODE_* flags every time we add a new one. With this we can avoid using a flag bit and we have more leeway in how we open block devices from bdev_open_by_{dev,path}(). Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-1-adbd023e19cc@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
6306ff39 |
|
09-Oct-2023 |
Lizhi Xu <lizhi.xu@windriver.com> |
jfs: fix log->bdev_handle null ptr deref in lbmStartIO When sbi->flag is JFS_NOINTEGRITY in lmLogOpen(), log->bdev_handle can't be inited, so it value will be NULL. Therefore, add the "log ->no_integrity=1" judgment in lbmStartIO() to avoid such problems. Reported-and-tested-by: syzbot+23bc20037854bb335d59@syzkaller.appspotmail.com Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://lore.kernel.org/r/20231009094557.1398920-1-lizhi.xu@windriver.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
898c57f4 |
|
27-Sep-2023 |
Jan Kara <jack@suse.cz> |
jfs: Convert to bdev_open_by_dev() Convert jfs to use bdev_open_by_dev() and pass the handle around. CC: Dave Kleikamp <shaggy@kernel.org> CC: jfs-discussion@lists.sourceforge.net Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-24-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
05bdb996 |
|
08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: replace fmode_t with a block-specific type for block open flags The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
2736e8ee |
|
08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: use the holder as indication for exclusive opens The current interface for exclusive opens is rather confusing as it requires both the FMODE_EXCL flag and a holder. Remove the need to pass FMODE_EXCL and just key off the exclusive open off a non-NULL holder. For blkdev_put this requires adding the holder argument, which provides better debug checking that only the holder actually releases the hold, but at the same time allows removing the now superfluous mode argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0718afd4 |
|
01-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: introduce holder ops Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and installed in the block_device for exclusive claims. It will be used to allow the block layer to call back into the user of the block device for thing like notification of a removed device or a device resize. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
2896db17 |
|
31-May-2023 |
Johannes Thumshirn <johannes.thumshirn@wdc.com> |
jfs: logmgr: use __bio_add_page to add single page to bio The JFS IO code uses bio_add_page() to add a page to a newly created bio. bio_add_page() can fail, but the return value is never checked. Use __bio_add_page() as adding a single page to a newly created bio is guaranteed to succeed. This brings us a step closer to marking bio_add_page() as __must_check. Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/9fb5ed86d19f6e0b6f64dfc4109a48ff8ff24497.1685532726.git.johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e471e594 |
|
25-Apr-2022 |
Dave Kleikamp <dave.kleikamp@oracle.com> |
fs/jfs: Remove dead code Since the JFS code was first added to Linux, there has been code hidden in ifdefs for some potential future features such as defragmentation and supporting block sizes other than 4KB. There has been no ongoing development on JFS for many years, so it's past time to remove this dead code from the source. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
07888c66 |
|
24-Jan-2022 |
Christoph Hellwig <hch@lst.de> |
block: pass a block_device and opf to bio_alloc Pass the block_device and operation that we plan to use this bio for to bio_alloc to optimize the assignment. NULL/0 can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Also move the gfp_mask argument after the nr_vecs argument for a much more logical calling convention matching what most of the kernel does. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
49210933 |
|
01-Jun-2021 |
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> |
fs/jfs: Fix missing error code in lmLogInit() The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc. Eliminate the follow smatch warning: fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
1a59d1b8 |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
2e3bc612 |
|
10-Jan-2019 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
fs/jfs: Switch to use new generic UUID API There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
07a3b8ed |
|
11-Apr-2018 |
Christoph Hellwig <hch@lst.de> |
jfs: simplify procfs code Use remove_proc_subtree to remove the whole subtree on cleanup, and unwind the registration loop into individual calls. Switch to use proc_create_seq where applicable. Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
74d46992 |
|
23-Aug-2017 |
Christoph Hellwig <hch@lst.de> |
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4e4cbee9 |
|
03-Jun-2017 |
Christoph Hellwig <hch@lst.de> |
block: switch bios to blk_status_t Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
70fd7614 |
|
01-Nov-2016 |
Christoph Hellwig <hch@lst.de> |
block,fs: use REQ_* flags directly Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
95fe6c1a |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
block, fs, mm, drivers: use bio set/get op accessors This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
4e49ea4a |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
block/fs/drivers: remove rw argument from submit_bio This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
84c60b13 |
|
27-May-2016 |
Al Viro <viro@zeniv.linux.org.uk> |
drop redundant ->owner initializations it's not needed for file_operations of inodes located on fs defined in the hosting module and for file_operations that go into procfs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
6ed71e98 |
|
30-Mar-2016 |
Joe Perches <joe@perches.com> |
jfs: Coalesce some formats Formats are better kept as a single line for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
b18db6de |
|
30-Mar-2016 |
Joe Perches <joe@perches.com> |
jfs: Remove terminating newlines from jfs_info, jfs_warn, jfs_err uses These macros add the newline so these cause extra blank lines in logging output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
76e8d7cb |
|
02-Jan-2016 |
Al Viro <viro@zeniv.linux.org.uk> |
jfs: microoptimize get_zeroed_page / virt_to_page get_zeroed_page does alloc_page and returns page_address of the result; subsequent virt_to_page will recover the page, but since the caller needs both page and its page_address() anyway, why bother going through that wrapper at all? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
6cf66b4c |
|
21-Dec-2014 |
Kent Overstreet <kent.overstreet@gmail.com> |
fs: use helper bio_add_page() instead of open coding on bi_io_vec Call pre-defined helper bio_add_page() instead of open coding for iterating through bi_io_vec[]. Doing that, it's possible to make some parts in filesystems and mm/page_io.c simpler than before. Acked-by: Dave Kleikamp <shaggy@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
4246a0b6 |
|
20-Jul-2015 |
Christoph Hellwig <hch@lst.de> |
block: add a bi_error field to struct bio Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
f139caf2 |
|
12-Sep-2014 |
Kirill Tkhai <ktkhai@parallels.com> |
sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after schedule() schedule(), io_schedule() and schedule_timeout() always return with TASK_RUNNING state set, so one more setting is unnecessary. (All places in patch are visible good, only exception is kiblnd_scheduler() from: drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c Its schedule() is one line above standard 3 lines of unified diff) No places where set_current_state() is used for mb(). Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai Cc: Alasdair Kergon <agk@redhat.com> Cc: Anil Belur <askb23@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: David Howells <dhowells@redhat.com> Cc: Dmitry Eremin <dmitry.eremin@intel.com> Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Isaac Huang <he.huang@intel.com> Cc: James E.J. Bottomley <JBottomley@parallels.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liang Zhen <liang.zhen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masaru Nomura <massa.nomura@gmail.com> Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleg Drokin <green@linuxhacker.ru> Cc: Peng Tao <bergwolf@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Robert Love <robert.w.love@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Zi Shen Lim <zlim.lnx@gmail.com> Cc: devel@driverdev.osuosl.org Cc: dm-devel@redhat.com Cc: dri-devel@lists.freedesktop.org Cc: fcoe-devel@open-fcoe.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-afs@lists.infradead.org Cc: linux-cris-kernel@axis.com Cc: linux-kernel@vger.kernel.org Cc: linux-nfs@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: qla2xxx-upstream@qlogic.com Cc: user-mode-linux-devel@lists.sourceforge.net Cc: user-mode-linux-user@lists.sourceforge.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
bc4e6b28 |
|
21-May-2014 |
Fabian Frederick <fabf@skynet.be> |
fs/jfs/jfs_logmgr.c: remove NULL assignment on static Static values are automatically initialized to NULL Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
4f024f37 |
|
11-Oct-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
|
#
95bbb82f |
|
23-May-2013 |
Gu Zheng <guz.fnst@cn.fujitsu.com> |
fs/jfs: Add check if journaling to disk has been disabled in lbmRead() Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
73aaa22d |
|
01-May-2013 |
Dave Kleikamp <dave.kleikamp@oracle.com> |
jfs: fix a couple races This patch fixes races uncovered by xfstests testcase 068. One race is the result of jfs_sync() trying to write a sync point to the journal after it has been frozen (or possibly in the process). Since freezing sync's the journal, there is no need to write a sync point so we simply want to return. The second involves jfs_write_inode() being called on a deleted inode. It calls jfs_flush_journal which is held up by the jfs_commit thread doing the final iput on the same deleted inode, which itself is waiting for the I_SYNC flag to be cleared. jfs_write_inode need not do anything when i_nlink is zero, which is the easy fix. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
4f2ac93c |
|
04-Sep-2012 |
Kent Overstreet <koverstreet@google.com> |
block: Remove bi_idx references For immutable bvecs, all bi_idx usage needs to be audited - so here we're removing all the unnecessary uses. Most of these are places where it was being initialized on a bio that was just allocated, a few others are conversions to standard macros. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk>
|
#
a0acae0e |
|
21-Nov-2011 |
Tejun Heo <tj@kernel.org> |
freezer: unexport refrigerator() and update try_to_freeze() slightly There is no reason to export two functions for entering the refrigerator. Calling refrigerator() instead of try_to_freeze() doesn't save anything noticeable or removes any race condition. * Rename refrigerator() to __refrigerator() and make it return bool indicating whether it scheduled out for freezing. * Update try_to_freeze() to return bool and relay the return value of __refrigerator() if freezing(). * Convert all refrigerator() users to try_to_freeze(). * Update documentation accordingly. * While at it, add might_sleep() to try_to_freeze(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@infradead.org>
|
#
afeacc8c |
|
26-May-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
fs: add export.h to files using EXPORT_SYMBOL/THIS_MODULE macros These files were getting <linux/module.h> via an implicit include path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
#
9054760f |
|
05-Jun-2011 |
Al Viro <viro@ZenIV.linux.org.uk> |
lmLogOpen() broken failure exit Callers of lmLogOpen() expect it to return -E... on failure exits, which is what it returns, except for the case of blkdev_get_by_dev() failure. It that case lmLogOpen() return the error with the wrong sign... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
#
d4d77629 |
|
13-Nov-2010 |
Tejun Heo <tj@kernel.org> |
block: clean up blkdev_get() wrappers and their users After recent blkdev_get() modifications, open_by_devnum() and open_bdev_exclusive() are simple wrappers around blkdev_get(). Replace them with blkdev_get_by_dev() and blkdev_get_by_path(). blkdev_get_by_dev() is identical to open_by_devnum(). blkdev_get_by_path() is slightly different in that it doesn't automatically add %FMODE_EXCL to @mode. All users are converted. Most conversions are mechanical and don't introduce any behavior difference. There are several exceptions. * btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no reason to OR it explicitly on blkdev_put(). * gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in sb->s_mode. * With the above changes, sb->s_mode now always should contain FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect errors. The new blkdev_get_*() functions are with proper docbook comments. While at it, add function description to blkdev_get() too. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: reiserfs-devel@vger.kernel.org Cc: xfs-masters@oss.sgi.com Cc: Alexander Viro <viro@zeniv.linux.org.uk>
|
#
e525fd89 |
|
13-Nov-2010 |
Tejun Heo <tj@kernel.org> |
block: make blkdev_get/put() handle exclusive access Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Brown <neilb@suse.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Philipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
|
#
817f2c84 |
|
20-Sep-2010 |
Nikanth Karthikesan <knikanth@suse.de> |
Fix various typos of valid in comments Fix various typos of valid. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
9a1c3542 |
|
22-Feb-2008 |
Al Viro <viro@zeniv.linux.org.uk> |
[PATCH] pass fmode_t to blkdev_put() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
b2e03ca7 |
|
13-May-2008 |
Alexey Dobriyan <adobriyan@gmail.com> |
JFS: switch to seq_files Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
09aaa749 |
|
13-Nov-2007 |
Joe Perches <joe@perches.com> |
JFS: Remove defconfig ptr comparison to 0 Remove sparse warning: Using plain integer as NULL pointer Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
67e6682f |
|
10-Oct-2007 |
Dave Kleikamp <shaggy@linux.vnet.ibm.com> |
JFS: Make sure special inode data is written after journal is flushed This patch makes sure that data that we tried to flush before the journal was completely written actually gets pushed to disk. To avoid duplicating code, moved common code to write_special_inodes(). Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
8d8fe642 |
|
12-Oct-2007 |
Dave Kleikamp <shaggy@linux.vnet.ibm.com> |
JFS: Bio cleanup: Replace missing return statements commit e30408b2a99cb7b8bf529c7dc2328a19d71894cf ("JFS: fix bio-related build breakage") removed some "return 0;" statements, rather than changing them to null returns. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e30408b2 |
|
11-Oct-2007 |
Jeff Garzik <jeff@garzik.org> |
JFS: fix bio-related build breakage Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
6712ecf8 |
|
26-Sep-2007 |
NeilBrown <neilb@suse.de> |
Drop 'size' argument from bio_endio and bi_end_io As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
288e4d83 |
|
13-Jun-2007 |
Dave Kleikamp <shaggy@linux.vnet.ibm.com> |
JFS: Update print_hex_dump() syntax Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
209e101b |
|
06-Jun-2007 |
Dave Kleikamp <shaggy@linux.vnet.ibm.com> |
JFS: use print_hex_dump() rather than private dump_mem() function Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
f720e3ba |
|
06-Jun-2007 |
Dave Kleikamp <shaggy@linux.vnet.ibm.com> |
JFS: Whitespace cleanup and remove some dead code Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
59c51591 |
|
09-May-2007 |
Michael Opdenacker <michael@free-electrons.com> |
Fix occurrences of "the the " Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
e63340ae |
|
08-May-2007 |
Randy Dunlap <randy.dunlap@oracle.com> |
header cleaning: don't include smp_lock.h when not used Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
05ec9e26 |
|
05-May-2007 |
Dave Kleikamp <shaggy@linux.vnet.ibm.com> |
JFS: Fix race waking up jfsIO kernel thread It's possible for a journal I/O request to be added to the log_redrive queue and the jfsIO thread to be awakened after the thread releases log_redrive_lock but before it sets its state to TASK_INTERRUPTIBLE. The jfsIO thread should set the state before giving up the spinlock, so the waking thread will really wake it. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
3cbb1c8e |
|
26-Apr-2007 |
Milind Arun Choudhary <milindchoudhary@gmail.com> |
JFS: use __set_current_state() use __set_current_state(TASK_*) instead of current->state = TASK_* Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
|
#
7dfb7103 |
|
06-Dec-2006 |
Nigel Cunningham <ncunningham@linuxmail.org> |
[PATCH] Add include/linux/freezer.h and move definitions from sched.h Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
63f83c9f |
|
02-Oct-2006 |
Dave Kleikamp <shaggy@austin.ibm.com> |
JFS: White space cleanup Removed trailing spaces & tabs, and spaces preceding tabs. Also a couple very minor comment cleanups. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> (cherry picked from f74156539964d7b3d5164fdf8848e6a682f75b97 commit)
|
#
353ab6e9 |
|
26-Mar-2006 |
Ingo Molnar <mingo@elte.hu> |
[PATCH] sem2mutex: fs/ Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Cc: Robert Love <rml@tech9.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
5b3030e3 |
|
23-Feb-2006 |
Eric Sesterhenn <snakebyte@gmx.de> |
JFS: kzalloc conversion this converts fs/jfs to kzalloc() usage. compile tested with make allyesconfig Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
91dbb4de |
|
14-Feb-2006 |
Christoph Hellwig <hch@lst.de> |
JFS: Use the kthread_ API Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
1de87444 |
|
24-Jan-2006 |
Ingo Molnar <mingo@elte.hu> |
JFS: semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build and boot tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
cbc3d65e |
|
27-Jul-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
JFS: Improve sync barrier processing Under heavy load, hot metadata pages are often locked by non-committed transactions, making them difficult to flush to disk. This prevents the sync point from advancing past a transaction that had modified the page. There is a point during the sync barrier processing where all outstanding transactions have been committed to disk, but no new transaction have been allowed to proceed. This is the best time to write the metadata. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
c2783f3a |
|
25-Jul-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
JFS: Don't set log_SYNCBARRIER when log->active == 0 If a metadata page is kept active, it is possible that the sync barrier logic continues to trigger, even if all active transactions have been phyically written to the journal. This can cause a hang, since the completion of the journal I/O is what unsets the sync barrier flag to allow new transactions to be created. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
3e1d1d28 |
|
25-Jun-2005 |
Christoph Lameter <christoph@lameter.com> |
[PATCH] Cleanup patch for process freezing 1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
72e3148a |
|
03-Jun-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
JFS: Fix compiler warning in jfs_logmgr.c fs/jfs/jfs_logmgr.c: In function `jfs_flush_journal': fs/jfs/jfs_logmgr.c:1632: warning: unused variable `mp' Some debug code in jfs_flush_journal does nothing when CONFIG_JFS_DEBUG is not defined. Place the whole code segment within an ifdef to avoid unnecessary code to be compiled and the warning to be issued. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
1868f4aa |
|
04-May-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
JFS: fix sparse warnings by moving extern declarations to headers Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
|
#
1c627829 |
|
02-May-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
[PATCH] JFS: Write journal sync points more often This patch adds jfs_syncpt, which calls lmLogSync to write sync points to the journal both in jfs_sync_fs and when sync barrier processing completes. lmLogSync accomplishes two things: 1) it pushes logged-but-dirty metadata pages to disk, and 2) it writes a sync record to the journal so that jfs_fsck doesn't need to replay more transactions than is necessary. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
7fab479b |
|
02-May-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
[PATCH] JFS: Support page sizes greater than 4K jfs has never worked on architecutures where the page size was not 4K. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
dc5798d9 |
|
02-May-2005 |
Dave Kleikamp <shaggy@austin.ibm.com> |
[PATCH] JFS: Changes for larger page size JFS code has always assumed a page size of 4K. This patch fixes the non-pagecache uses of pages to deal with larger pages. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|