fs/jfs: Use common ucs2 upper case table

Use the UCS-2 upper case tables from nls, that are shared
with smb.

This code in JFS is hard to test, so we're only reusing the
same tables (which are identical), not trying to reuse the
rest of the helper functions.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

fs/jfs: Remove dead code

Since the JFS code was first added to Linux, there has been code hidden
in ifdefs for some potential future features such as defragmentation
and supporting block sizes other than 4KB. There has been no ongoing
development on JFS for many years, so it's past time to remove this dead
code from the source.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/jfs: TRIM support for JFS Filesystem

This patch adds support for the two linux interfaces of the discard/TRIM
command for SSD devices and sparse/thinly-provisioned LUNs.

JFS will support batched discard via FITRIM ioctl and online discard
with the discard mount option.

Signed-off-by: Tino Reichardt <list-jfs@mcmilk.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>

fs: change to new flag variable

Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y
for cleaner conditional inclusion.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

JFS: ext2 inode attributes for jfs

ext2 inode attributes with relevance for jfs:

'a' EXT2_APPEND_FL -> append only
'i' EXT2_IMMUTABLE_FL -> immutable file
's' EXT2_SECRM_FL -> zero file
'u' EXT2_UNRM_FL -> allow for unrm
'A' EXT2_NOATIME_FL -> no access time
'D' EXT2_DIRSYNC_FL -> dirsync
'S' EXT2_SYNC_FL -> sync

overview of jfs flags (partially for OS/2)

value (OS/2) Linux ext2 attrs
------------------------------------------------
0x00010000 IFJOURNAL -
0x00020000 ISPARSE used
0x00040000 INLINEEA used
0x00080000 - - JFS_NOATIME_FL

0x00100000 - - JFS_DIRSYNC_FL
0x00200000 - - JFS_SYNC_FL
0x00400000 - - JFS_SECRM_FL
0x00800000 ISWAPFILE - JFS_UNRM_FL

0x01000000 - - JFS_APPEND_FL
0x02000000 IREADONLY - JFS_IMMUTABLE_FL
0x04000000 IHIDDEN - -
0x08000000 ISYSTEM - -

0x10000000 - -
0x20000000 IDIRECTORY used
0x40000000 IARCHIVE -
0x80000000 INEWNAME -

the implementation is straight forward, except
for the fact that the attributes have to be mapped
to match with the ext2 ones to avoid a separate
tool for manipulating them (this could be avoided
when using a separate flag field in the on-disk
representation, but the overhead is minimal)

a special jfs_ioctl is added to allow for the new
JFS_IOC_GETFLAGS and JFS_IOC_SETFLAGS calls.

a helper function jfs_set_inode_flags() to transfer
the flags from the on-disk version to the inode

minor changes to allow flag inheritance on inode
creation, as well as a cleanup of the on-disk
flags (including the new ones)

beforementioned helper to map between ext2 and jfs
versions of the new flags ...

the JFS_SECRM_FL and JFS_UNRM_FL are not done yet
and I'm not 100% sure they are worth the effort,
the rest seems to work out of the box ...

Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!