#
0d72b928 |
|
07-Aug-2023 |
Jeff Layton <jlayton@kernel.org> |
fs: pass the request_mask to generic_fillattr generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
2cb1e089 |
|
22-May-2023 |
David Howells <dhowells@redhat.com> |
splice: Use filemap_splice_read() instead of generic_file_splice_read() Replace pointers to generic_file_splice_read() with calls to filemap_splice_read(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4d7ca409 |
|
12-Jan-2023 |
Christian Brauner <brauner@kernel.org> |
fs: port vfs{g,u}id helpers to mnt_idmap Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
#
e67fe633 |
|
12-Jan-2023 |
Christian Brauner <brauner@kernel.org> |
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap Convert to struct mnt_idmap. Remove legacy file_mnt_user_ns() and mnt_user_ns(). Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
#
b74d24f7 |
|
12-Jan-2023 |
Christian Brauner <brauner@kernel.org> |
fs: port ->getattr() to pass mnt_idmap Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
#
c1632a0f |
|
12-Jan-2023 |
Christian Brauner <brauner@kernel.org> |
fs: port ->setattr() to pass mnt_idmap Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
#
41d27f51 |
|
09-Sep-2022 |
Christian Brauner <brauner@kernel.org> |
fat: port to vfs{g,u}id_t and associated helpers A while ago we introduced a dedicated vfs{g,u}id_t type in commit 1e5267cd0895 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched over a good part of the VFS. Ultimately we will remove all legacy idmapped mount helpers that operate only on k{g,u}id_t in favor of the new type safe helpers that operate on vfs{g,u}id_t. Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
#
b27c82e1 |
|
21-Jun-2022 |
Christian Brauner <brauner@kernel.org> |
attr: port attribute changes to new types Now that we introduced new infrastructure to increase the type safety for filesystems supporting idmapped mounts port the first part of the vfs over to them. This ports the attribute changes codepaths to rely on the new better helpers using a dedicated type. Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to inode->i_{g,u}id since they are different types. Instead they need to use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the vfs{g,u}id into the filesystem. The other nice effect is that filesystems like overlayfs don't need to care about idmappings explicitly anymore and can simply set up struct iattr accordingly directly. Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1] Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
#
0e363cf3 |
|
21-Jun-2022 |
Christian Brauner <brauner@kernel.org> |
security: pass down mount idmapping to setattr hook Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Adapt the security_inode_setattr() helper to pass down the mount's idmapping to account for that change. Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
#
30abce05 |
|
03-May-2022 |
Chung-Chiang Cheng <cccheng@synology.com> |
fat: report creation time in statx creation time is no longer mixed with change time. Add an in-memory field for it, and report it in statx if supported. Link: https://lkml.kernel.org/r/20220503152536.2503003-3-cccheng@synology.com Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
7b47ef52 |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
block: add a bdev_discard_granularity helper Abstract away implementation details from file systems by providing a block_device based helper to retrieve the discard granularity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
70200574 |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
block: remove QUEUE_FLAG_DISCARD Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9bb56d59 |
|
19-Jan-2022 |
NeilBrown <neilb@suse.de> |
FAT: use io_schedule_timeout() instead of congestion_wait() congestion_wait() in this context is just a sleep - block devices do not support congestion signalling any more. The goal for this wait, which was introduced in commit ae78bf9c4f5f ("[PATCH] add -o flush for fat") is to wait for any recently written data to get to storage. We currently have no direct mechanism to do this, so a simple wait that behaves identically to the current congestion_wait() is the best we can do. This is a step towards removing congestion_wait() Link: https://lkml.kernel.org/r/163936544519.22433.13400436295732112065@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
4b789936 |
|
21-Jan-2021 |
Christian Brauner <christian.brauner@ubuntu.com> |
fat: handle idmapped mounts Let fat handle idmapped mounts. This allows to have the same fat mount appear in multiple locations with different id mappings. This allows to expose a vfat formatted USB stick to multiple user with different ids on the host or in user namespaces allowing for dac permissions: mount -o uid=1000,gid=1000 /dev/sdb /mnt u1001@f2-vm:/lower1$ ls -ln /mnt/ total 4 -rwxr-xr-x 1 1000 1000 4 Oct 28 03:44 aaa -rwxr-xr-x 1 1000 1000 0 Oct 28 01:09 bbb -rwxr-xr-x 1 1000 1000 0 Oct 28 01:10 ccc -rwxr-xr-x 1 1000 1000 0 Oct 28 03:46 ddd -rwxr-xr-x 1 1000 1000 0 Oct 28 04:01 eee mount-idmapped --map-mount b:1000:1001:1 u1001@f2-vm:/lower1$ ls -ln /lower1/ total 4 -rwxr-xr-x 1 1001 1001 4 Oct 28 03:44 aaa -rwxr-xr-x 1 1001 1001 0 Oct 28 01:09 bbb -rwxr-xr-x 1 1001 1001 0 Oct 28 01:10 ccc -rwxr-xr-x 1 1001 1001 0 Oct 28 03:46 ddd -rwxr-xr-x 1 1001 1001 0 Oct 28 04:01 eee u1001@f2-vm:/lower1$ touch /lower1/fff u1001@f2-vm:/lower1$ ls -ln /lower1/fff -rwxr-xr-x 1 1001 1001 0 Oct 28 04:03 /lower1/fff u1001@f2-vm:/lower1$ ls -ln /mnt/fff -rwxr-xr-x 1 1000 1000 0 Oct 28 04:03 /mnt/fff Link: https://lore.kernel.org/r/20210121131959.646623-38-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
#
549c7297 |
|
21-Jan-2021 |
Christian Brauner <christian.brauner@ubuntu.com> |
fs: make helpers idmap mount aware Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
#
0d56a451 |
|
21-Jan-2021 |
Christian Brauner <christian.brauner@ubuntu.com> |
stat: handle idmapped mounts The generic_fillattr() helper fills in the basic attributes associated with an inode. Enable it to handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace before we store the uid and gid. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
#
2f221d6f |
|
21-Jan-2021 |
Christian Brauner <christian.brauner@ubuntu.com> |
attr: handle idmapped mounts When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
#
c6bf3f0e |
|
26-Jan-2021 |
Christoph Hellwig <hch@lst.de> |
block: use an on-stack bio in blkdev_issue_flush There is no point in allocating memory for a synchronous flush. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e348e65a |
|
11-Aug-2020 |
Yubo Feng <fengyubo3@huawei.com> |
fatfs: switch write_lock to read_lock in fat_ioctl_get_attributes There is no need to hold write_lock in fat_ioctl_get_attributes. write_lock may make an impact on concurrency of fat_ioctl_get_attributes. Signed-off-by: Yubo Feng <fengyubo3@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Link: http://lkml.kernel.org/r/1593308053-12702-1-git-send-email-fengyubo3@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9398554f |
|
13-May-2020 |
Christoph Hellwig <hch@lst.de> |
block: remove the error_sector argument to blkdev_issue_flush The argument isn't used by any caller, and drivers don't fill out bi_sector for flush requests either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
407e9ef7 |
|
11-Sep-2018 |
Arnd Bergmann <arnd@arndb.de> |
compat_ioctl: move drivers to compat_ptr_ioctl Each of these drivers has a copy of the same trivial helper function to convert the pointer argument and then call the native ioctl handler. We now have a generic implementation of that, so use it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
457c8996 |
|
19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier for missed files Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
bd8309de |
|
14-May-2019 |
Hou Tao <houtao1@huawei.com> |
fs/fat/file.c: issue flush after the writeback of FAT fsync() needs to make sure the data & meta-data of file are persistent after the return of fsync(), even when a power-failure occurs later. In the case of fat-fs, the FAT belongs to the meta-data of file, so we need to issue a flush after the writeback of FAT instead before. Also bail out early when any stage of fsync fails. Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
67ceb1ec |
|
07-Mar-2019 |
Hou Tao <houtao1@huawei.com> |
fat: enable .splice_write to support splice on O_DIRECT file Now splice() on O_DIRECT-opened fat file will return -EFAULT, that is because the default .splice_write, namely default_file_splice_write(), will construct an ITER_KVEC iov_iter and dio_refill_pages() in dio path can not handle it. Fix it by implementing .splice_write through iter_file_splice_write(). Spotted by xfs-tests generic/091. Link: http://lkml.kernel.org/r/20190210094754.56355-1-houtao1@huawei.com Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
22ea4eba |
|
30-Oct-2018 |
Frank Sorenson <sorenson@redhat.com> |
fat: truncate inode timestamp updates in setattr setattr_copy can't truncate timestamps correctly for msdos/vfat, so truncate and copy them ourselves. Link: http://lkml.kernel.org/r/a2b4701b1125573fafaeaae6802050ca86d6f8cc.1538363961.git.sorenson@redhat.com Signed-off-by: Frank Sorenson <sorenson@redhat.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
cd83f6b1 |
|
30-Oct-2018 |
Frank Sorenson <sorenson@redhat.com> |
fat: change timestamp updates to use fat_truncate_time Convert the inode timestamp updates to use fat_truncate_time. Link: http://lkml.kernel.org/r/2663d3083c4dd62f00b64612c8eaf5542bb05a4c.1538363961.git.sorenson@redhat.com Signed-off-by: Frank Sorenson <sorenson@redhat.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
6bb885ec |
|
30-Oct-2018 |
Frank Sorenson <sorenson@redhat.com> |
fat: add functions to update and truncate timestamps appropriately Add the fat-specific inode_operation ->update_time() and fat_truncate_time() function to truncate the inode timestamps from 1 nanosecond to the appropriate granularity. Link: http://lkml.kernel.org/r/38af1ba3c3cf0d7381ce7b63077ef8af75901532.1538363961.git.sorenson@redhat.com Signed-off-by: Frank Sorenson <sorenson@redhat.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f663b5b3 |
|
21-Aug-2018 |
Wentao Wang <witallwang@gmail.com> |
fat: add FITRIM ioctl for FAT file system Add FITRIM ioctl for FAT file system [witallwang@gmail.com: use u64s] Link: http://lkml.kernel.org/r/87h8l37hub.fsf@mail.parknet.co.jp [hirofumi@mail.parknet.co.jp: bug fixes, coding style fixes, add signal check] Link: http://lkml.kernel.org/r/87fu10anhj.fsf@mail.parknet.co.jp Signed-off-by: Wentao Wang <witallwang@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a528d35e |
|
31-Jan-2017 |
David Howells <dhowells@redhat.com> |
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
c2050a45 |
|
14-Sep-2016 |
Deepa Dinamani <deepa.kernel@gmail.com> |
fs: Replace current_fs_time() with current_time() current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
02027d42 |
|
14-Sep-2016 |
Deepa Dinamani <deepa.kernel@gmail.com> |
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps CURRENT_TIME_SEC is not y2038 safe. current_time() will be transitioned to use 64 bit time along with vfs in a separate patch. There is no plan to transistion CURRENT_TIME_SEC to use y2038 safe time interfaces. current_time() will also be extended to use superblock range checking parameters when range checking is introduced. This works because alloc_super() fills in the the s_time_gran in super block to NSEC_PER_SEC. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
31051c85 |
|
26-May-2016 |
Jan Kara <jack@suse.cz> |
fs: Give dentry to inode_change_ok() instead of inode inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
|
#
5955102c |
|
22-Jan-2016 |
Al Viro <viro@zeniv.linux.org.uk> |
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
b13bb33e |
|
20-Jan-2016 |
Namjae Jeon <namjae.jeon@samsung.com> |
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
66114cad |
|
22-May-2015 |
Tejun Heo <tj@kernel.org> |
writeback: separate out include/linux/backing-dev-defs.h With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
58932ef7 |
|
16-Apr-2015 |
Alexander Kuleshov <kuleshovmail@gmail.com> |
fs/fat: remove unnecessary includes 'fat.h' includes <linux/buffer_head.h> which includes <linux/fs.h> which includes all the header files required for all *.c files fat filesystem. [akpm@linux-foundation.org: fs/fat/iode.c needs seq_file.h] [sfr@canb.auug.org.au: put one actually necessary include file back] Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2b0143b5 |
|
17-Mar-2015 |
David Howells <dhowells@redhat.com> |
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
5d5d5689 |
|
03-Apr-2015 |
Al Viro <viro@zeniv.linux.org.uk> |
make new_sync_{read,write}() static All places outside of core VFS that checked ->read and ->write for being NULL or called the methods directly are gone now, so NULL {read,write} with non-NULL {read,write}_iter will do the right thing in all cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
c0ef0cc9 |
|
12-Dec-2014 |
Namjae Jeon <namjae.jeon@samsung.com> |
fat: fix data past EOF resulting from fsx testsuite When running FSX with direct I/O mode, fsx resulted in DATA past EOF issues. fsx ./file2 -Z -r 4096 -w 4096 ... .. truncating to largest ever: 0x907c fallocating to largest ever: 0x11137 truncating to largest ever: 0x2c6fe truncating to largest ever: 0x2cfdf fallocating to largest ever: 0x40000 Mapped Read: non-zero data past EOF (0x18628) page offset 0x629 is 0x2a4e ... .. The reason being, it is doing a truncate down, but the zeroing does not happen on the last block boundary when offset is not aligned. Even though it calls truncate_setsize()->truncate_inode_pages()-> truncate_inode_pages_range() and considers the partial zeroout but it retrieves the page using find_lock_page() - which only looks the page in the cache. So, zeroing out does not happen in case of direct IO. Make a truncate page based around block_truncate_page for FAT filesystem and invoke that helper to zerout in case the offset is not aligned with the blocksize. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8174202b |
|
03-Apr-2014 |
Al Viro <viro@zeniv.linux.org.uk> |
write_iter variants of {__,}generic_file_aio_write() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
aad4f8bb |
|
02-Apr-2014 |
Al Viro <viro@zeniv.linux.org.uk> |
switch simple generic_file_aio_read() users to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
6e5b93ee |
|
08-Jul-2013 |
Mike Lockwood <lockwood@android.com> |
fatfs: add FAT_IOCTL_GET_VOLUME_ID This patch, originally from Android kernel, adds vfat ioctl command FAT_IOCTL_GET_VOLUME_ID, with this command we can get the vfat volume ID using following code: ioctl(fd, FAT_IOCTL_GET_VOLUME_ID, &volume_ID) This patch is a modified version of the patch by Mike Lockwood, with changes from Dmitry Pervushin, who noticed the original patch makes some volume IDs abiguous with error returns: for example, if volume id is 0xFFFFFDAD, that matches -ENOIOCTLCMD, we get "FFFFFFFF" from the user space. So add a parameter to ioctl to get the correct volume ID. Android uses vfat volume ID to identify different sd card, when a new sd card is inserted to device, android can scan the media on it and pop up new contents. Signed-off-by: Bintian Wang <bintian.wang@linaro.org> Cc: dmitry pervushin <dpervushin@gmail.com> Cc: Mike Lockwood <lockwood@android.com> Cc: Colin Cross <ccross@android.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: John Stultz <john.stultz@linaro.org> Cc: Sean McNeil <sean@mcneil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
ea3983ac |
|
29-Apr-2013 |
Namjae Jeon <namjae.jeon@samsung.com> |
fat: restructure export_operations Define two nfs export_operation structures,one for 'stale_rw' mounts and the other for 'nostale_ro'. The latter uses i_pos as a basis for encoding and decoding file handles. Also, assign i_pos to kstat->ino. The logic for rebuilding the inode is added in the subsequent patches. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ravishankar N <ravi.n1@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
496ad9aa |
|
23-Jan-2013 |
Al Viro <viro@zeniv.linux.org.uk> |
new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
170782eb |
|
07-Feb-2012 |
Eric W. Biederman <ebiederm@xmission.com> |
userns: Convert fat to use kuid/kgid where appropriate Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
#
e24f17da |
|
12-Jun-2012 |
Jan Kara <jack@suse.cz> |
fat: Push mnt_want_write() outside of i_mutex When mnt_want_write() starts to handle freezing it will get a full lock semantics requiring proper lock ordering. So push mnt_want_write() call outside of i_mutex as in other places. CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
dacd0e7b |
|
26-Jul-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
fat: propagate umode_t Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
2a79f17e |
|
09-Dec-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
vfs: mnt_drop_write_file() new helper (wrapper around mnt_drop_write()) to be used in pair with mnt_want_write_file(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
a561be71 |
|
23-Nov-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
switch a bunch of places to mnt_want_write_file() it's both faster (in case when file has been opened for write) and cleaner. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
02c24a82 |
|
16-Jul-2011 |
Josef Bacik <josef@redhat.com> |
fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
562c72aa5 |
|
24-Jun-2011 |
Christoph Hellwig <hch@infradead.org> |
fs: move inode_dio_wait calls into ->setattr Let filesystems handle waiting for direct I/O requests themselves instead of doing it beforehand. This means filesystem-specific locks to prevent new dio referenes from appearing can be held. This is important to allow generalizing i_dio_count to non-DIO_LOCKING filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
58268691 |
|
24-Jun-2011 |
Christoph Hellwig <hch@infradead.org> |
fat: remove i_alloc_sem abuse Add a new rw_semaphore to protect bmap against truncate. Previous i_alloc_sem was abused for this, but it's going away in this series. Note that we can't simply use i_mutex, given that the swapon code calls ->bmap under it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
1adffbae |
|
31-May-2011 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: Fix corrupt inode flags when remove ATTR_SYS flag We are clearly missing '~' in fat_ioctl_set_attributes(). Cc: <stable@kernel.org> Reported-by: Dmitry Dmitriev <dimondmm@yandex.ru> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
#
2c27c65e |
|
04-Jun-2010 |
Christoph Hellwig <hch@lst.de> |
check ATTR_SIZE contraints in inode_change_ok Make sure we check the truncate constraints early on in ->setattr by adding those checks to inode_change_ok. Also clean up and document inode_change_ok to make this obvious. As a fallout we don't have to call inode_newsize_ok from simple_setsize and simplify it down to a truncate_setsize which doesn't return an error. This simplifies a lot of setattr implementations and means we use truncate_setsize almost everywhere. Get rid of fat_setsize now that it's trivial and mark ext2_setsize static to make the calling convention obvious. Keep the inode_newsize_ok in vmtruncate for now as all callers need an audit for its removal anyway. Note: setattr code in ecryptfs doesn't call inode_change_ok at all and needs a deeper audit, but that is left for later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
db78b877 |
|
04-Jun-2010 |
Christoph Hellwig <hch@lst.de> |
always call inode_change_ok early in ->setattr Make sure we call inode_change_ok before doing any changes in ->setattr, and make sure to call it even if our fs wants to ignore normal UNIX permissions, but use the ATTR_FORCE to skip those. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
6a1a90ad |
|
04-Jun-2010 |
Christoph Hellwig <hch@lst.de> |
rename generic_setattr Despite its name it's now a generic implementation of ->setattr, but rather a helper to copy attributes from a struct iattr to the inode. Rename it to setattr_copy to reflect this fact. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
459f6ed3 |
|
26-May-2010 |
npiggin@suse.de <npiggin@suse.de> |
fat: convert to use the new truncate convention. Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
1b061d92 |
|
26-May-2010 |
Christoph Hellwig <hch@lst.de> |
rename the generic fsync implementations We don't name our generic fsync implementations very well currently. The no-op implementation for in-memory filesystems currently is called simple_sync_file which doesn't make too much sense to start with, the the generic one for simple filesystems is called simple_fsync which can lead to some confusion. This patch renames the generic file fsync method to generic_file_fsync to match the other generic_file_* routines it is supposed to be used with, and the no-op implementation to noop_fsync to make it obvious what to expect. In addition add some documentation for both methods. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
7ea80859 |
|
26-May-2010 |
Christoph Hellwig <hch@lst.de> |
drop unused dentry argument to ->fsync Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
7845bc3e |
|
16-May-2010 |
Arnd Bergmann <arnd@arndb.de> |
fat: convert to unlocked_ioctl FAT does not require the BKL in its ioctl function, which is already serialized through a mutex. Since we're already touching the ioctl code, also fix the missing handling of FAT_IOCTL_GET_ATTRIBUTES in the compat code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
#
2f3d675b |
|
17-Aug-2009 |
Jan Kara <jack@suse.cz> |
fat: Opencode sync_page_range_nolock() fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the only user of generic_osync_inode() which does not have a file open. So opencode needed actions for FAT so that we can convert generic_osync_inode() to a standard syncing path. Update a comment about generic_osync_inode(). CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Jan Kara <jack@suse.cz>
|
#
8aa7e847 |
|
09-Jul-2009 |
Jens Axboe <jens.axboe@oracle.com> |
Fix congestion_wait() sync/async vs read/write confusion Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
b522412a |
|
07-Jun-2009 |
Al Viro <viro@zeniv.linux.org.uk> |
Sanitize ->fsync() for FAT * mark directory data blocks as assoc. metadata * add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that * now ->fsync() is trivial both for files and directories Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
21bea495 |
|
08-Jun-2009 |
Christoph Hellwig <hch@lst.de> |
fat: split fat_generic_ioctl Split up fat_generic_ioctl and add separate functions for the two implemented ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
#
85c78591 |
|
03-Jun-2009 |
Denis Karpov <ext-denis.2.karpov@nokia.com> |
FAT: add 'errors' mount option On severe errors FAT remounts itself in read-only mode. Allow to specify FAT fs desired behavior through 'errors' mount option: panic, continue or remount read-only. `mount -t [fat|vfat] -o errors=[panic,remount-ro,continue] \ <bdev> <mount point>` This is analog to ext2 fs 'errors' mount option. Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
|
#
f0ce7ee3 |
|
13-Nov-2008 |
David Howells <dhowells@redhat.com> |
CRED: Wrap task credential accesses in the FAT filesystem Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: James Morris <jmorris@namei.org>
|
#
dfc209c0 |
|
06-Nov-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: Fix ATTR_RO for directory FAT has the ATTR_RO (read-only) attribute. But on Windows, the ATTR_RO of the directory will be just ignored actually, and is used by only applications as flag. E.g. it's setted for the customized folder by Explorer. http://msdn2.microsoft.com/en-us/library/aa969337.aspx This adds "rodir" option. If user specified it, ATTR_RO is used as read-only flag even if it's the directory. Otherwise, inode->i_mode is not used to hold ATTR_RO (i.e. fat_mode_can_save_ro() returns 0). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9183482f |
|
06-Nov-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: Fix ATTR_RO in the case of (~umask & S_WUGO) == 0 If inode->i_mode doesn't have S_WUGO, current code assumes it means ATTR_RO. However, if (~[ufd]mask & S_WUGO) == 0, inode->i_mode can't hold S_WUGO. Therefore the updated directory entry will always have ATTR_RO. This adds fat_mode_can_hold_ro() to check it. And if inode->i_mode can't hold, uses -i_attrs to hold ATTR_RO instead. With this, we don't set ATTR_RO unless users change it via ioctl() if (~[ufd]mask & S_WUGO) == 0. And on FAT_IOCTL_GET_ATTRIBUTES path, this adds ->i_mutex to it for not returning the partially updated attributes by FAT_IOCTL_SET_ATTRIBUTES to userland. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9c0aa1b8 |
|
06-Nov-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: Cleanup FAT attribute stuff This adds three helpers: fat_make_attrs() - makes FAT attributes from inode. fat_make_mode() - makes mode_t from FAT attributes. fat_save_attrs() - saves FAT attributes to inode. Then this replaces: MSDOS_MKMODE() by fat_make_mode(), fat_attr() by fat_make_attrs(), ->i_attrs = attr & ATTR_UNUSED by fat_save_attrs(). And for root inode, those is used with ATTR_DIR instead of bogus ATTR_NONE. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9e975dae |
|
06-Nov-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: split include/msdos_fs.h This splits __KERNEL__ stuff in include/msdos_fs.h into fs/fat/fat.h. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
17263849 |
|
01-Aug-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: Fix allow_utime option FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime option. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b1da47e2 |
|
01-Jul-2008 |
Miklos Szeredi <mszeredi@suse.cz> |
[patch 3/4] fat: dont call notify_change The FAT_IOCTL_SET_ATTRIBUTES ioctl() calls notify_change() to change the file mode before changing the inode attributes. Replace with explicit calls to security_inode_setattr(), fat_setattr() and fsnotify_change(). This is equivalent to the original. The reason it is needed, is that later in the series we move the immutable check into notify_change(). That would break the FAT_IOCTL_SET_ATTRIBUTES ioctl, as it needs to perform the mode change regardless of the immutability of the file. [Fix error if fat is built as a module. Thanks to OGAWA Hirofumi for noticing.] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
9c20616c |
|
29-May-2008 |
Jonathan Corbet <corbet@lwn.net> |
Make FAT users happier by not deadlocking The FAT BKL removal patch can cause deadlocks. It turns out that the new lock_super() calls are unneeded, remove them (as directed by Linus). Reported-by: "Tony Luck" <tony.luck@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
#
8f593427 |
|
19-May-2008 |
Linus Torvalds <torvalds@linux-foundation.org> |
Replace BKL with superblock lock in fat/msdos/vfat This replaces the use of the BKL in the FAT family of filesystems with the existing superblock lock instead. The code already appears to do mostly proper locking with its own private spinlocks (and mutexes), but while the BKL could possibly have been dropped entirely, converting it to use the superblock lock (which is just a regular mutex) is the conservative thing to do. As a per-filesystem mutex, it not only won't have any of the possible latency issues related to the BKL, but the lock is obviously private to the particular filesystem instance and will thus not cause problems for entirely unrelated users like the BKL can. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
#
2d518f84 |
|
12-Jun-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: relax the permission check of fat_setattr() New chmod() allows only acceptable permission, and if not acceptable, it returns -EPERM. Old one allows even if it can't store permission to on disk inode. But it seems too strict for users. E.g. https://bugzilla.redhat.com/show_bug.cgi?id=449080: With new one, rsync couldn't create the temporary file. So, this patch allows like old one, but now it doesn't change the permission if it can't store, and it returns 0. Also, this patch fixes missing check. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8e24eea7 |
|
30-Apr-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
fs: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1ae43f82 |
|
28-Apr-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: Add allow_utime option Normally utime(2) checks current process is owner of the file, or it has CAP_FOWNER capability. But FAT filesystem doesn't have uid/gid as on disk info, so normal check is too unflexible. With this option you can relax it. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e97e8de3 |
|
28-Apr-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: fat_setattr() fix Fix fat_setattr() on the case of showexec option. If user specified showexec option, inode->i_mode may not have S_IXUGO. This just use inode->i_mode to fix it. And with this patch, we don't allow chmod() on memory inode, it's just bad behaviour. IOW, we allow changing S_IWUGO only which can be stored to disk. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1278fdd3 |
|
28-Apr-2008 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
fat: fat_notify_change() and check_mode() cleanup - Rename fat_notify_change() to fat_setattr() - check_mode() cleanup - Change layout of code Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
42a74f20 |
|
15-Feb-2008 |
Dave Hansen <haveblue@us.ibm.com> |
[PATCH] r/o bind mounts: elevate write count for ioctls() Some ioctl()s can cause writes to the filesystem. Take these, and make them use mnt_want/drop_write() instead. [AV: updated] Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
19c561a6 |
|
06-Feb-2008 |
Jan Engelhardt <jengelh@computergmbh.de> |
fs/fat/: refine chmod checks Prohibit mode changes in non-quiet mode that cannot be stored reliably with the on-disk format. Suppose a vfat filesystem is mounted with umask=0 and [not-quiet]. Then all files will have mode 0777. Trying to change the owner will fail, because fat does not know about owners or groups. chmod 0770, on the other hand, will succeed, even though fat does not know about the permission triplet [user/group/other]. So this patch changes fat's not-quiet behavior so that only UNIX modes are accepted that can be mapped lossless between the fat disk format and the local system. There is only one attribute, and that is the readonly attribute, which is mapped to the UNIX write permission bit(s). chmod 0555 is therefore valid (taking away the +w bits <=> setting the readonly attribute). Since chmod 0775 and chmod 0755 is an ambiguous case as to whether to set or clear the readonly bit, these modes are also denied. In quiet mode, chmod and chown will continue to "succeed" as they did before, meaning that a subsequent stat() will temporarily return the new mode as long as the inode is not reread from disk, and chown will silently do nothing, not even return the new uid/gid in stat(). Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
5ffc4ef4 |
|
01-Jun-2007 |
Jens Axboe <jens.axboe@oracle.com> |
sendfile: remove .sendfile from filesystems that use generic_file_sendfile() They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
754661f1 |
|
12-Feb-2007 |
Arjan van de Ven <arjan@linux.intel.com> |
[PATCH] mark struct inode_operations const 1 Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
dba32306 |
|
08-Dec-2006 |
Josef "Jeff" Sipek <jsipek@cs.sunysb.edu> |
[PATCH] fat: change uses of f_{dentry,vfsmnt} to use f_path Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the fat filesystem. Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
da63fc7c |
|
16-Nov-2006 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
[PATCH] fat: add fat_getattr() This adds fat_getattr() for setting stat->blksize. (FAT uses the size of cluster for proper I/O) Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
3fcfab16 |
|
20-Oct-2006 |
Andrew Morton <akpm@osdl.org> |
[PATCH] separate bdi congestion functions from queue congestion functions Separate out the concept of "queue congestion" from "backing-dev congestion". Congestion is a backing-dev concept, not a queue concept. The blk_* congestion functions are retained, as wrappers around the core backing-dev congestion functions. This proper layering is needed so that NFS can cleanly use the congestion functions, and so that CONFIG_BLOCK=n actually links. Cc: "Thomas Maier" <balagi@justmail.de> Cc: "Jens Axboe" <jens.axboe@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Howells <dhowells@redhat.com> Cc: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
ee0b3e67 |
|
01-Oct-2006 |
Badari Pulavarty <pbadari@us.ibm.com> |
[PATCH] Remove readv/writev methods and use aio_read/aio_write instead This patch removes readv() and writev() methods and replaces them with aio_read()/aio_write() methods. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
ae78bf9c |
|
29-Sep-2006 |
Chris Mason <mason@suse.com> |
[PATCH] add -o flush for fat Fat is commonly used on removable media. Mounting with -o flush tells the FS to write things to disk as quickly as possible. It is like -o sync, but much faster (and not as safe). Signed-off-by: Chris Mason <mason@suse.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
4b6f5d20 |
|
28-Mar-2006 |
Arjan van de Ven <arjan@infradead.org> |
[PATCH] Make most file operations structs in fs/ const This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
3b641407 |
|
03-Feb-2006 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
[PATCH] fat: Fix truncate() write ordering The truncate() should write the file size before writing the new EOF entry. This patch fixes it. This bug was pointed out by Machida Hiroyuki. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
16f7e0fe |
|
11-Jan-2006 |
Randy Dunlap <rdunlap@infradead.org> |
[PATCH] capable/capability.h (fs/) fs: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1b1dcc1b |
|
09-Jan-2006 |
Jes Sorensen <jes@sgi.com> |
[PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
05eb0b51 |
|
08-Jan-2006 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
[PATCH] fat: support a truncate() for expanding size (generic_cont_expand) This patch changes generic_cont_expand(), in order to share the code with fatfs. - Use vmtruncate() if ->prepare_write() returns a error. Even if ->prepare_write() returns an error, it may already have added some blocks. So, this truncates blocks outside of ->i_size by vmtruncate(). - Add generic_cont_expand_simple(). The generic_cont_expand_simple() assumes that ->prepare_write() can handle the block boundary. With this, we don't need to care the extra byte. And for expanding a file size by truncate(), fatfs uses the added generic_cont_expand_simple(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
7c709d00 |
|
08-Jan-2006 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
[PATCH] fat: s/EXPORT_SYMBOL/EXPORT_SYMBOL_GPL/ All EXPORT_SYMBOL of fatfs is only for vfat/msdos. _GPL would be proper. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
ef402268 |
|
16-Sep-2005 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
[PATCH] FAT: miss-sync issues on sync mount (miss-sync on write) This patch fixes miss-sync issue on write() system call. This updates inode attrs flags, mtime and ctime on every comit_write call, due to locking. Signed-off-by: Hiroyuki Machida <machida@sm.sony.co.jp> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|