ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations

The "needed" controls the number of ext4_prealloc_space to discard in
ext4_discard_preallocations. Function ext4_discard_preallocations is
supposed to discard all non-used preallocated blocks when "needed"
is 0 and now ext4_discard_preallocations is always called with "needed"
= 0. Remove unnecessary parameter "needed" and remove all non-used
preallocated spaces in ext4_discard_preallocations to simplify the
code.

Note: If count of non-used preallocated spaces could be more than
UINT_MAX, there was a memory leak as some non-used preallocated
spaces are left ununsed and this commit will fix it. Otherwise,
there is no behavior change.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240105092102.496631-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

bdev: rename freeze and thaw helpers

We have bdev_mark_dead() etc and we're going to move block device
freezing to holder ops in the next patch. Make the naming consistent:

* freeze_bdev() -> bdev_freeze()
* thaw_bdev() -> bdev_thaw()

Also document the return code.

Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

ext4: convert to new timestamp accessors

Convert to using the new inode timestamp accessor functions.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-33-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

ext4: make ext4_forced_shutdown() take struct super_block

Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-40-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

ext4: fix to check return value of freeze_bdev() in ext4_shutdown()

freeze_bdev() can fail due to a lot of reasons, it needs to check its
reason before later process.

Fixes: 783d94854499 ("ext4: add EXT4_IOC_GOINGDOWN ioctl")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230606073203.1310389-1-chao@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: split ext4_shutdown

Split ext4_shutdown into a low-level helper that will be reused for
implementing the shutdown super operation and a wrapper for the ioctl
handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ext4: zero i_disksize when initializing the bootloader inode

If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:

WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80

Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);

Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove dead code in updating backup sb

ext4_update_backup_sb checks for err having some value
after unlocking buffer. But err has not been updated
till that point in any code which will lead execution
of the code in question.

Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221230141858.3828-1-007047221b@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs: port inode_owner_or_capable() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->fileattr_set() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

ext4: initialize quota before expanding inode in setproject ioctl

Make sure we initialize quotas before possibly expanding inode space
(and thus maybe needing to allocate external xattr block) in
ext4_ioctl_setproject(). This prevents not accounting the necessary
block allocation.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221207115937.26601-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: don't fail GETFSUUID when the caller provides a long buffer

If userspace provides a longer UUID buffer than is required, we
shouldn't fail the call with EINVAL -- rather, we can fill the caller's
buffer with the bytes we /can/ fill, and update the length field to
reflect what we copied. This doesn't break the UAPI since we're
enabling a case that currently fails, and so far Ted hasn't released a
version of e2fsprogs that uses the new ext4 ioctl.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Link: https://lore.kernel.org/r/166811139478.327006.13879198441587445544.stgit@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: dont return EINVAL from GETFSUUID when reporting UUID length

If userspace calls this ioctl with fsu_length (the length of the
fsuuid.fsu_uuid array) set to zero, ext4 copies the desired uuid length
out to userspace. The kernel call returned a result from a valid input,
so the return value here should be zero, not EINVAL.

While we're at it, fix the copy_to_user call to make it clear that we're
only copying out fsu_len.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Link: https://lore.kernel.org/r/166811138914.327006.9241306894437166566.stgit@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix bug_on in __es_tree_search caused by bad boot loader inode

We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:203!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349
RIP: 0010:ext4_es_end.isra.0+0x34/0x42
RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__es_tree_search.isra.0+0x6d/0xf5
ext4_es_cache_extent+0xfa/0x230
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_mpage_readpages+0x48e/0xe40
ext4_readahead+0x47/0x50
read_pages+0x82/0x530
page_cache_ra_unbounded+0x199/0x2a0
do_page_cache_ra+0x47/0x70
page_cache_ra_order+0x242/0x400
ondemand_readahead+0x1e8/0x4b0
page_cache_sync_ra+0xf4/0x110
filemap_get_pages+0x131/0xb20
filemap_read+0xda/0x4b0
generic_file_read_iter+0x13a/0x250
ext4_file_read_iter+0x59/0x1d0
vfs_read+0x28f/0x460
ksys_read+0x73/0x160
__x64_sys_read+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode

There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: update the backup superblock's at the end of the online resize

When expanding a file system using online resize, various fields in
the superblock (e.g., s_blocks_count, s_inodes_count, etc.) change.
To update the backup superblocks, the online resize uses the function
update_backups() in fs/ext4/resize.c. This function was not updating
the checksum field in the backup superblocks. This wasn't a big deal
previously, because e2fsck didn't care about the checksum field in the
backup superblock. (And indeed, update_backups() goes all the way
back to the ext3 days, well before we had support for metadata
checksums.)

However, there is an alternate, more general way of updating
superblock fields, ext4_update_primary_sb() in fs/ext4/ioctl.c. This
function does check the checksum of the backup superblock, and if it
doesn't match will mark the file system as corrupted. That was
clearly not the intent, so avoid to aborting the resize when a bad
superblock is found.

In addition, teach update_backups() to properly update the checksum in
the backup superblocks. We will eventually want to unify
updapte_backups() with the infrasture in ext4_update_primary_sb(), but
that's for another day.

Note: The problem has been around for a while; it just didn't really
matter until ext4_update_primary_sb() was added by commit bbc605cdb1e1
("ext4: implement support for get/set fs label"). And it became
trivially easy to reproduce after commit 827891a38acc ("ext4: update
the s_overhead_clusters in the backup sb's when resizing") in v6.0.

Cc: stable@kernel.org # 5.17+
Fixes: bbc605cdb1e1 ("ext4: implement support for get/set fs label")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

treewide: use get_random_u32() when possible

The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

ext4: remove redundant checking in ext4_ioctl_checkpoint

It is already checked after comment "check for invalid bits set",
so let's remove this one.

Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220918115219.12407-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix i_version handling in ext4

ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations with NFSv4 and unnecessary remeasurements for IMA.

The increment in ext4_mark_iloc_dirty is also problematic since it can
corrupt the i_version counter for ea_inodes. We aren't bumping the file
times in ext4_mark_iloc_dirty, so changing the i_version there seems
wrong, and is the cause of both problems.

Remove that callsite and add increments to the setattr, setxattr and
ioctl codepaths, at the same times that we update the ctime. The
i_version bump that already happens during timestamp updates should take
care of the rest.

In ext4_move_extents, increment the i_version on both inodes, and also
add in missing ctime updates.

[ Some minor updates since we've already enabled the i_version counter
unconditionally already via another patch series. -- TYT ]

Cc: stable@kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add ioctls to get/set the ext4 superblock uuid

This fixes a race between changing the ext4 superblock uuid and operations
like mounting, resizing, changing features, etc.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeremy Bongio <bongiojp@gmail.com>
Link: https://lore.kernel.org/r/20220721224422.438351-1-bongiojp@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: update the s_overhead_clusters in the backup sb's when resizing

When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks. We don't do this for the old-style resize ioctls since
they are quite ancient, and only used by very old versions of
resize2fs --- and we don't want to update the backup superblocks every
time EXT4_IOC_GROUP_ADD is called, since it might get called a lot.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()

This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.

Suggested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5af98b17152a96b245b4f7d2dfb8607fc93e36aa.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

block: remove QUEUE_FLAG_DISCARD

Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.

The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ext4: update the cached overhead value in the superblock

If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk version since this can take potentially quite a while on
bigalloc file systems.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix kernel doc warnings

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fast commit may not fallback for ineligible commit

For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync

In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.

Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: implement support for get/set fs label

Implement support for FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls for
online reading and setting of file system label.

ext4_ioctl_getlabel() is simple, just get the label from the primary
superblock. This might not be the first sb on the file system if
'sb=' mount option is used.

In ext4_ioctl_setlabel() we update what ext4 currently views as a
primary superblock and then proceed to update backup superblocks. There
are two caveats:
- the primary superblock might not be the first superblock and so it
might not be the one used by userspace tools if read directly
off the disk.
- because the primary superblock might not be the first superblock we
potentialy have to update it as part of backup superblock update.
However the first sb location is a bit more complicated than the rest
so we have to account for that.

The superblock modification is created generic enough so the
infrastructure can be used for other potential superblock modification
operations, such as chaning UUID.

Tested with generic/492 with various configurations. I also checked the
behavior with 'sb=' mount options, including very large file systems
with and without sparse_super/sparse_super2.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211213135618.43303-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: avoid trim error on fs with small groups

A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.

CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: drop ineligible txn start stop APIs

This patch drops ext4_fc_start_ineligible() and
ext4_fc_stop_ineligible() APIs. Fast commit ineligible transactions
should simply call ext4_fc_mark_ineligible() after starting the
trasaction.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-3-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use ext4_journal_start/stop for fast commit transactions

This patch drops all calls to ext4_fc_start_update() and
ext4_fc_stop_update(). To ensure that there are no ongoing journal
updates during fast commit, we also make jbd2_fc_begin_commit() lock
journal for updates. This way we don't have to maintain two different
transaction start stop APIs for fast commit and full commit. This
patch doesn't remove the functions altogether since in future we want
to have inode level locking for fast commits.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Support for checksumming from journal triggers

JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.

So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Convert to use mapping->invalidate_lock

Convert ext4 to use mapping->invalidate_lock instead of its private
EXT4_I(inode)->i_mmap_sem. This is mostly search-and-replace. By this
conversion we fix a long standing race between hole punching and read(2)
/ readahead(2) paths that can lead to stale page cache contents.

CC: <linux-ext4@vger.kernel.org>
CC: Ted Tso <tytso@mit.edu>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>

ext4: fix flags validity checking for EXT4_IOC_CHECKPOINT

Use the correct bitmask when checking for any not-yet-supported flags.

Link: https://lore.kernel.org/r/20210702173425.1276158-1-tytso@mit.edu
Fixes: 351a0a3fbc35 ("ext4: add ioctl EXT4_IOC_CHECKPOINT")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Leah Rumancik <leah.rumancik@gmail.com>

Revert "ext4: consolidate checks for resize of bigalloc into ext4_resize_begin"

The function ext4_resize_begin() gets called from three different
places, and online resize for bigalloc file systems is disallowed from
the old-style online resize (EXT4_IOC_GROUP_ADD and
EXT4_IOC_GROUP_EXTEND), but it *is* supposed to be allowed via
EXT4_IOC_RESIZE_FS.

This reverts commit e9f9f61d0cdcb7f0b0b5feb2d84aa1c5894751f3.

ext4: consolidate checks for resize of bigalloc into ext4_resize_begin

Two different places checked for attempts to resize a filesystem with
the bigalloc feature. Move the check into ext4_resize_begin, which both
places already call.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/bee03303d999225ecb3bfa5be8576b2f4c6edbe6.1623093259.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add ioctl EXT4_IOC_CHECKPOINT

ioctl EXT4_IOC_CHECKPOINT checkpoints and flushes the journal. This
includes forcing all the transactions to the log, checkpointing the
transactions, and flushing the log to disk. This ioctl takes u32 "flags"
as an argument. Three flags are supported. EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN
can be used to verify input to the ioctl. It returns error if there is any
invalid input, otherwise it returns success without performing
any checkpointing. The other two flags, EXT4_IOC_CHECKPOINT_FLAG_DISCARD
and EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT, can be used to issue requests to
discard or zeroout the journal logs blocks, respectively. At this
point, EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT is primarily added to enable
testing of this codepath on devices that don't support discard.
EXT4_IOC_CHECKPOINT_FLAG_DISCARD and EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT
cannot both be set.

Systems that wish to achieve content deletion SLO can set up a daemon
that calls this ioctl at a regular interval such that it matches with the
SLO requirement. Thus, with this patch, the ext4_dir_entry2 wipeout
patch[1], and the Ext4 "-o discard" mount option set, Ext4 can now
guarantee that all file contents, file metatdata, and filenames will not
be accessible through the filesystem and will have had discard or
zeroout requests issued for corresponding device blocks.

The __jbd2_journal_erase function could also be used to discard or
zero-fill the journal during journal load after recovery. This would
provide a potential solution to a journal replay bug reported earlier this
year[2]. After a successful journal recovery, e2fsck can call this ioctl to
discard the journal as well.

[1] https://lore.kernel.org/linux-ext4/YIHknqxngB1sUdie@mit.edu/
[2] https://lore.kernel.org/linux-ext4/YDZoaacIYStFQT8g@mit.edu/

Link: https://lore.kernel.org/r/20210518151327.130198-2-leah.rumancik@gmail.com
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add discard/zeroout flags to journal flush

Add a flags argument to jbd2_journal_flush to enable discarding or
zero-filling the journal blocks while flushing the journal.

Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210518151327.130198-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove redundant assignment to error

Variable error is set to zero but this value is never read as it's not
used later on, hence it is a redundant assignment and can be removed.

Cleans up the following clang-analyzer warning:

fs/ext4/ioctl.c:657:3: warning: Value stored to 'error' is never read
[clang-analyzer-deadcode.DeadStores].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619691409-83160-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: allow the dax flag to be set and cleared on inline directories

This is needed to allow generic/607 to pass for file systems with the
inline data_feature enabled, and it allows the use of file systems
where the directories use inline_data, while the files are accessed
via DAX.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: convert to fileattr

Use the fileattr API to let the VFS handle locking, permission checking and
conversion.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>

ext4: support idmapped mounts

Enable idmapped mounts for ext4. All dedicated helpers we need for this
exist. So this basically just means we're passing down the
user_namespace argument from the VFS methods to the relevant helpers.

Let's create simple example where we idmap an ext4 filesystem:

root@f2-vm:~# truncate -s 5G ext4.img

root@f2-vm:~# mkfs.ext4 ./ext4.img
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 1310720 4k blocks and 327680 inodes
Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

root@f2-vm:~# losetup -f --show ./ext4.img
/dev/loop0

root@f2-vm:~# mount /dev/loop0 /mnt

root@f2-vm:~# ls -al /mnt/
total 24
drwxr-xr-x 3 root root 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 root root 16384 Oct 28 13:34 lost+found

# Let's create an idmapped mount at /idmapped1 where we map uid and gid
# 0 to uid and gid 1000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/

root@f2-vm:/# ls -al /idmapped1/
total 24
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found

# Let's create an idmapped mount at /idmapped2 where we map uid and gid
# 0 to uid and gid 2000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/

root@f2-vm:/# ls -al /idmapped2/
total 24
drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found

Let's create another example where we idmap the rootfs filesystem
without a mapping for uid 0 and gid 0:

# Create an idmapped mount of for a full POSIX range of rootfs under
# /mnt but without a mapping for uid 0 to reduce attack surface

root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/

# Since we don't have a mapping for uid and gid 0 all files owned by
# uid and gid 0 should show up as uid and gid 65534:
root@f2-vm:/# ls -al /mnt/
total 664
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev
drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64
lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32
drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc
drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run
lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys
drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp
drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr
drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var

# Since we do have a mapping for uid and gid 1000 all files owned by
# uid and gid 1000 should simply show up as uid and gid 1000:
root@f2-vm:/# ls -al /mnt/home/ubuntu/
total 40
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 .
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo

Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

inode: make init and permission helpers idmapped mount aware

The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl

Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:

- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present

This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.

Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.

This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:

- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.

- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.

This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.

More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.

Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.

In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.

Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: fix superblock checksum failure when setting password salt

When setting password salt in the superblock, we forget to recompute the
superblock checksum so it will not match until the next superblock
modification which recomputes the checksum. Fix it.

CC: Michael Halcrow <mhalcrow@google.com>
Reported-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs: simplify freeze_bdev/thaw_bdev

Store the frozen superblock in struct block_device to avoid the awkward
interface that can return a sb only used a cookie, an ERR_PTR or NULL.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ext4: fast commit recovery path

This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: main fast-commit commit path

This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:

(A) Metadata updates tracking

This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:

- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.

(B) Main commit Path

This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: limit the length of per-inode prealloc list

In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.

After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:

Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s

Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use generic names for generic ioctls

Don't define EXT4_IOC_* aliases to ioctls that already have a generic
FS_IOC_* name. These aliases are unnecessary, and they make it unclear
which ioctls are ext4-specific and which are generic.

Exception: leave EXT4_IOC_GETVERSION_OLD and EXT4_IOC_SETVERSION_OLD
as-is for now, since renaming them to FS_IOC_GETVERSION and
FS_IOC_SETVERSION would probably make them more likely to be confused
with EXT4_IOC_GETVERSION and EXT4_IOC_SETVERSION which also exist.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200714230909.56349-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove the access_ok() check in ext4_ioctl_get_es_cache

access_ok just checks we are fed a proper user pointer. We also do that
in copy_to_user itself, so no need to do this early.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200523073016.2944131-10-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs: handle FIEMAP_FLAG_SYNC in fiemap_prep

By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix fiemap size checks for bitmap files

Add an extra validation of the len parameter, as for ext4 some files
might have smaller file size limits than others. This also means the
redundant size check in ext4_ioctl_get_es_cache can go away, as all
size checking is done in the shared fiemap handler.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200505154324.3226743-3-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs/ext4: Introduce DAX inode flag

Add a flag ([EXT4|FS]_DAX_FL) to preserve FS_XFLAG_DAX in the ext4
inode.

Set the flag to be user visible and changeable. Set the flag to be
inherited. Allow applications to change the flag at any time except if
it conflicts with the set of mutually exclusive flags (Currently VERITY,
ENCRYPT, JOURNAL_DATA).

Furthermore, restrict setting any of the exclusive flags if DAX is set.

While conceptually possible, we do not allow setting EXT4_DAX_FL while
at the same time clearing exclusion flags (or vice versa) for 2 reasons:

1) The DAX flag does not take effect immediately which
introduces quite a bit of complexity
2) There is no clear use case for being this flexible

Finally, on regular files, flag the inode to not be cached to facilitate
changing S_DAX on the next creation of the inode.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>

Link: https://lore.kernel.org/r/20200528150003.828793-9-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs/ext4: Remove jflag variable

The jflag variable serves almost no purpose. Remove it.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>

Link: https://lore.kernel.org/r/20200528150003.828793-8-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs/ext4: Only change S_DAX on inode load

To prevent complications with in memory inodes we only set S_DAX on
inode load. FS_XFLAG_DAX can be changed at any time and S_DAX will
change after inode eviction and reload.

Add init bool to ext4_set_inode_flags() to indicate if the inode is
being newly initialized.

Assert that S_DAX is not set on an inode which is just being loaded.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

Link: https://lore.kernel.org/r/20200528150003.828793-6-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs/ext4: Narrow scope of DAX check in setflags

When preventing DAX and journaling on an inode. Use the effective DAX
check rather than the mount option.

This will be required to support per inode DAX flags.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-2-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix fiemap size checks for bitmap files

Add an extra validation of the len parameter, as for ext4 some files
might have smaller file size limits than others. This also means the
redundant size check in ext4_ioctl_get_es_cache can go away, as all
size checking is done in the shared fiemap handler.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200505154324.3226743-3-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE

This new ioctl retrieves a file's encryption nonce, which is useful for
testing. See the corresponding fs/crypto/ patch for more details.

Link: https://lore.kernel.org/r/20200314205052.93294-3-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: remove EXT4_EOFBLOCKS_FL and associated code

The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file
contains unwritten blocks past i_size. It's set when ext4_fallocate
is called with the KEEP_SIZE flag to extend a file with an unwritten
extent. However, this flag hasn't been useful functionally since
March, 2012, when a decision was made to remove it from ext4.

All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version
1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag
handling") at that time. Now that enough time has passed to make
e2fsprogs versions containing this modification common, this patch now
removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as
well.

This change has two implications. First, because pre-1.42.2 e2fsck
versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and
because that bit will never be set by newer kernels containing this
patch, old versions of e2fsck won't have a compatibility problem with
files created by newer kernels.

Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits
belonging to a file written by an older kernel. If set, it will remain
in that state until the file is deleted. Because e2fsck versions since
1.42.2 don't check the flag at all, no adverse effect is expected.
However, pre-1.42.2 e2fsck versions that do check the flag may report
that it is set when it ought not to be after a file has been truncated
or had its unwritten blocks written. In this case, the old version of
e2fsck will offer to clear the flag. No adverse effect would then
occur whether the user chooses to clear the flag or not.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Add EXT4_IOC_FSGETXATTR/EXT4_IOC_FSSETXATTR to compat_ioctl

These are backed by 'struct fsxattr' which has the same size on all
architectures.

Signed-off-by: Martijn Coenen <maco@android.com>
Link: https://lore.kernel.org/r/20191227134639.35869-1-maco@android.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs: compat_ioctl: move FITRIM emulation into file systems

Remove the special case for FITRIM, and make file systems
handle that like all other ioctl commands with their own
handlers.

Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: linux-nilfs@vger.kernel.org
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ext4 crypto: fix to check feature status before get policy

When getting fscrypt policy via EXT4_IOC_GET_ENCRYPTION_POLICY, if
encryption feature is off, it's better to return EOPNOTSUPP instead of
ENODATA, so let's add ext4_has_feature_encrypt() to do the check for
that.

This makes it so that all fscrypt ioctls consistently check for the
encryption feature, and makes ext4 consistent with f2fs in this regard.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
[EB - removed unneeded braces, updated the documentation, and
added more explanation to commit message]
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: add basic fs-verity support

Add most of fs-verity support to ext4. fs-verity is a filesystem
feature that enables transparent integrity protection and authentication
of read-only files. It uses a dm-verity like mechanism at the file
level: a Merkle tree is used to verify any block in the file in
log(filesize) time. It is implemented mainly by helper functions in
fs/verity/. See Documentation/filesystems/fsverity.rst for the full
documentation.

This commit adds all of ext4 fs-verity support except for the actual
data verification, including:

- Adding a filesystem feature flag and an inode flag for fs-verity.

- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.

- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.

- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().

ext4 stores the verity metadata (Merkle tree and fsverity_descriptor)
past the end of the file, starting at the first 64K boundary beyond
i_size. This approach works because (a) verity files are readonly, and
(b) pages fully beyond i_size aren't visible to userspace but can be
read/written internally by ext4 with only some relatively small changes
to ext4. This approach avoids having to depend on the EA_INODE feature
and on rearchitecturing ext4's xattr support to support paging
multi-gigabyte xattrs into memory, and to support encrypting xattrs.
Note that the verity metadata *must* be encrypted when the file is,
since it contains hashes of the plaintext data.

This patch incorporates work by Theodore Ts'o and Chandan Rajendra.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: wire up new fscrypt ioctls

Wire up the new ioctls for adding and removing fscrypt keys to/from the
filesystem, and the new ioctl for retrieving v2 encryption policies.

The key removal ioctls also required making ext4_drop_inode() call
fscrypt_drop_inode().

For more details see Documentation/filesystems/fscrypt.rst and the
fscrypt patches that added the implementation of these ioctls.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: add new ioctl EXT4_IOC_GET_ES_CACHE

For debugging reasons, it's useful to know the contents of the extent
cache. Since the extent cache contains much of what is in the fiemap
ioctl, use an fiemap-style interface to return this information.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add a new ioctl EXT4_IOC_GETSTATE

The new ioctl EXT4_IOC_GETSTATE returns some of the dynamic state of
an ext4 inode for debugging purposes.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add a new ioctl EXT4_IOC_CLEAR_ES_CACHE

The new ioctl EXT4_IOC_CLEAR_ES_CACHE will force an inode's extent
status cache to be cleared out. This is intended for use for
debugging.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

vfs: teach vfs_ioc_fssetxattr_check to check project id info

Standardize the project id checks for FSSETXATTR.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>

vfs: create a generic checking function for FS_IOC_FSSETXATTR

Create a generic checking function for the incoming FS_IOC_FSSETXATTR
fsxattr values so that we can standardize some of the implementation
behaviors.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>

vfs: create a generic checking and prep function for FS_IOC_SETFLAGS

Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.

Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>

ext4: only set project inherit bit for directory

It doesn't make any sense to have project inherit bits
for regular files, even though this won't cause any
problem, but it is better fix this.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>

ext4: don't allow any modifications to an immutable file

Don't allow any modifications to a file that's marked immutable, which
means that we have to flush all the writable pages to make the readonly
and we have to check the setattr/setflags parameters more closely.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix miscellaneous sparse warnings

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Support case-insensitive file name lookups

This patch implements the actual support for case-insensitive file name
lookups in ext4, based on the feature bit and the encoding stored in the
superblock.

A filesystem that has the casefold feature set is able to configure
directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups
to succeed in that directory in a case-insensitive fashion, i.e: match
a directory entry even if the name used by userspace is not a byte per
byte match with the disk name, but is an equivalent case-insensitive
version of the Unicode string. This operation is called a
case-insensitive file name lookup.

The feature is configured as an inode attribute applied to directories
and inherited by its children. This attribute can only be enabled on
empty directories for filesystems that support the encoding feature,
thus preventing collision of file names that only differ by case.

* dcache handling:

For a +F directory, Ext4 only stores the first equivalent name dentry
used in the dcache. This is done to prevent unintentional duplication of
dentries in the dcache, while also allowing the VFS code to quickly find
the right entry in the cache despite which equivalent string was used in
a previous lookup, without having to resort to ->lookup().

d_hash() of casefolded directories is implemented as the hash of the
casefolded string, such that we always have a well-known bucket for all
the equivalencies of the same string. d_compare() uses the
utf8_strncasecmp() infrastructure, which handles the comparison of
equivalent, same case, names as well.

For now, negative lookups are not inserted in the dcache, since they
would need to be invalidated anyway, because we can't trust missing file
dentries. This is bad for performance but requires some leveraging of
the vfs layer to fix. We can live without that for now, and so does
everyone else.

* on-disk data:

Despite using a specific version of the name as the internal
representation within the dcache, the name stored and fetched from the
disk is a byte-per-byte match with what the user requested, making this
implementation 'name-preserving'. i.e. no actual information is lost
when writing to storage.

DX is supported by modifying the hashes used in +F directories to make
them case/encoding-aware. The new disk hashes are calculated as the
hash of the full casefolded string, instead of the string directly.
This allows us to efficiently search for file names in the htree without
requiring the user to provide an exact name.

* Dealing with invalid sequences:

By default, when a invalid UTF-8 sequence is identified, ext4 will treat
it as an opaque byte sequence, ignoring the encoding and reverting to
the old behavior for that unique file. This means that case-insensitive
file name lookup will not work only for that file. An optional bit can
be set in the superblock telling the filesystem code and userspace tools
to enforce the encoding. When that optional bit is set, any attempt to
create a file name using an invalid UTF-8 sequence will fail and return
an error to userspace.

* Normalization algorithm:

The UTF-8 algorithms used to compare strings in ext4 is implemented
lives in fs/unicode, and is based on a previous version developed by
SGI. It implements the Canonical decomposition (NFD) algorithm
described by the Unicode specification 12.1, or higher, combined with
the elimination of ignorable code points (NFDi) and full
case-folding (CF) as documented in fs/unicode/utf8_norm.c.

NFD seems to be the best normalization method for EXT4 because:

- It has a lower cost than NFC/NFKC (which requires
decomposing to NFD as an intermediary step)
- It doesn't eliminate important semantic meaning like
compatibility decompositions.

Although:

- This implementation is not completely linguistic accurate, because
different languages have conflicting rules, which would require the
specialization of the filesystem to a given locale, which brings all
sorts of problems for removable media and for users who use more than
one language.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: actually request zeroing of inode table after grow

It is never possible, that number of block groups decreases,
since only online grow is supported.

But after a growing occured, we have to zero inode tables
for just created new block groups.

Fixes: 19c5246d2516 ("ext4: add new online resize interface")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org

ext4: prohibit fstrim in norecovery mode

The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded. If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT

A malicious/clueless root user can use EXT4_IOC_SWAP_BOOT to force a
corner casew which can lead to the file system getting corrupted.
There's no usefulness to allowing this, so just prohibit this case.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add mask of ext4 flags to swap

The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure. The
simplest way to keep things sane is to restrict the flags that can be
swapped.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4: update quota information while swapping boot loader inode

While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: cleanup pagecache before swap i_data

While do swap, we should make sure there has no new dirty page since we
should swap i_data between two inode:
1.We should lock i_mmap_sem with write to avoid new pagecache from mmap
read/write;
2.Change filemap_flush to filemap_write_and_wait and move them to the
space protected by inode lock to avoid new pagecache from buffer read/write.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix check of inode in swap_inode_boot_loader

Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

fscrypt: remove filesystem specific build config option

In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: avoid declaring fs inconsistent due to invalid file handles

If we receive a file handle, either from NFS or open_by_handle_at(2),
and it points at an inode which has not been initialized, and the file
system has metadata checksums enabled, we shouldn't try to get the
inode, discover the checksum is invalid, and then declare the file
system as being inconsistent.

This can be reproduced by creating a test file system via "mke2fs -t
ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that
directory, and then running the following program.

#define _GNU_SOURCE
#include <fcntl.h>

struct handle {
struct file_handle fh;
unsigned char fid[MAX_HANDLE_SZ];
};

int main(int argc, char **argv)
{
struct handle h = {{8, 1 }, { 12, }};

open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY);
return 0;
}

Google-Bug-Id: 120690101
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR

We return most failure of dquota_initialize() except
inode evict, this could make a bit sense, for example
we allow file removal even quota files are broken?

But it dosen't make sense to allow setting project
if quota files etc are broken.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix setattr project check in fssetxattr ioctl

Currently, project quota could be changed by fssetxattr
ioctl, and existed permission check inode_owner_or_capable()
is obviously not enough, just think that common users could
change project id of file, that could make users to
break project quota easily.

This patch try to follow same regular of xfs project
quota:

"Project Quota ID state is only allowed to change from
within the init namespace. Enforce that restriction only
if we are trying to change the quota ID state.
Everything else is allowed in user namespaces."

Besides that, check and set project id'state should
be an atomic operation, protect whole operation with
inode lock, ext4_ioctl_setproject() is only used for
ioctl EXT4_IOC_FSSETXATTR, we have held mnt_want_write_file()
before ext4_ioctl_setflags(), and ext4_ioctl_setproject()
is called after ext4_ioctl_setflags(), we could share
codes, so remove it inside ext4_ioctl_setproject().

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org

ext4: fix EXT4_IOC_SWAP_BOOT

The code EXT4_IOC_SWAP_BOOT ioctl hasn't been updated in a while, and
it's a bit broken with respect to more modern ext4 kernels, especially
metadata checksums.

Other problems fixed with this commit:

* Don't allow installing a DAX, swap file, or an encrypted file as a
boot loader.

* Respect the immutable and append-only flags.

* Wait until any DIO operations are finished *before* calling
truncate_inode_pages().

* Don't swap inode->i_flags, since these flags have nothing to do with
the inode blocks --- and it will give the IMA/audit code heartburn
when the inode is evicted.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reported-by: syzbot+e81ccd4744c6c4f71354@syzkaller.appspotmail.com

ext4: remove EXT4_STATE_DIOREAD_LOCK flag

Commit 16c54688592c ("ext4: Allow parallel DIO reads") reworked the way
locking happens around parallel dio reads. This resulted in obviating
the need for EXT4_STATE_DIOREAD_LOCK flag and accompanying logic.
Currently this amounts to dead code so let's remove it. No functional
changes

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

ext4: pass -ESHUTDOWN code to jbd2 layer

Previously the jbd2 layer assumed that a file system check would be
required after a journal abort. In the case of the deliberate file
system shutdown, this should not be necessary. Allow the jbd2 layer
to distinguish between these two cases by using the ESHUTDOWN errno.

Also add proper locking to __journal_abort_soft().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4: eliminate sleep from shutdown ioctl

The msleep() when processing EXT4_GOING_FLAGS_NOLOGFLUSH was a hack to
avoid some races (that are now fixed), but in fact it introduced its
own race.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4: add tracepoints for shutdown and file system errors

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: convert to new i_version API

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>

ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: improve smp scalability for inode generation

->s_next_generation is protected by s_next_gen_lock but its usage
pattern is very primitive. We don't actually need sequentially
increasing new generation numbers, so let's use prandom_u32() instead.

Reported-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add support for online resizing with bigalloc

This patch adds support for online resizing on bigalloc file system by
implementing EXT4_IOC_RESIZE_FS ioctl. Old resize interfaces (add
block groups and extend last block group) are left untouched. Tests
performed with cluster sizes of 1, 2, 4 and 8 blocks (of size 4k) per
cluster. I will add these tests to xfstests.

Signed-off-by: Harshad Shirwadkar <harshads@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: prevent data corruption with journaling + DAX

The current code has the potential for data corruption when changing an
inode's journaling mode, as that can result in a subsequent unsafe change
in S_DAX.

I've captured an instance of this data corruption in the following fstest:

https://patchwork.kernel.org/patch/9948377/

Prevent this data corruption from happening by disallowing changes to the
journaling mode if the '-o dax' mount option was used. This means that for
a given filesystem we could have a mix of inodes using either DAX or
data journaling, but whatever state the inodes are in will be held for the
duration of the mount.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org

ext4, project: expand inode extra size if possible

When upgrading from old format, try to set project id
to old file first time, it will return EOVERFLOW, but if
that file is dirtied(touch etc), changing project id will
be allowed, this might be confusing for users, we could
try to expand @i_extra_isize here too.

Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: convert swap_inode_data() over to use swap() on most of the fields

For some odd reason, it forces a byte-by-byte copy of each field. A
plain old swap() on most of these fields would be more efficient. We
do need to retain the memswap of i_data however as that field is an array.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>

quota: add get_inode_usage callback to transfer multi-inode charges

Ext4 ea_inode feature allows storing xattr values in external inodes to
be able to store values that are bigger than a block in size. Ext4 also
has deduplication support for these type of inodes. With deduplication,
the actual storage waste is eliminated but the users of such inodes are
still charged full quota for the inodes as if there was no sharing
happening in the background.

This design requires ext4 to manually charge the users because the
inodes are shared.

An implication of this is that, if someone calls chown on a file that
has such references we need to transfer the quota for the file and xattr
inodes. Current dquot_transfer() function implicitly transfers one inode
charge. With ea_inode feature, we would like to transfer multiple inode
charges.

Add get_inode_usage callback which can interrogate the total number of
inodes that were charged for a given inode.

[ Applied fix from Colin King to make sure the 'ret' variable is
initialized on the successful return path. Detected by
CoverityScan, CID#1446616 ("Uninitialized scalar variable") --tytso]

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jan Kara <jack@suse.cz>

ext4: add ext4_is_quota_file()

IS_NOQUOTA() indicates whether quota is disabled for an inode. Ext4
also uses it to check whether an inode is for a quota file. The
distinction currently doesn't matter because quota is disabled only
for the quota files. When we start disabling quota for other inodes
in the future, we will want to make the distinction clear.

Replace IS_NOQUOTA() call with ext4_is_quota_file() at places where
we are checking for quota files.

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: make ext4_shutdown() static

Make the ext4_shutdown() function static, as suggested by running sparse
('make C=2 fs/ext4/'). This was the only such warning in fs/ext4/.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: support GETFSMAP ioctls

Support the GETFSMAP ioctls so that we can use the xfs free space
management tools to probe ext4 as well. Note that this is a partial
implementation -- we only report fixed-location metadata and free space;
everything else is reported as "unknown".

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Remove ext4_get_inode_flags()

Now that all places setting inode->i_flags that should be reflected in
on-disk flags are gone, we can remove ext4_get_inode_flags() call.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>

ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN

It's very likely the file system independent ioctl name will be
FS_IOC_SHUTDOWN, so let's use the same name for the ext4 ioctl name.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add EXT4_IOC_GOINGDOWN ioctl

This ioctl is modeled after the xfs's XFS_IOC_GOINGDOWN ioctl. (In
fact, it uses the same code points.)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fscrypto: move ioctl processing more fully into common code

Multiple bugs were recently fixed in the "set encryption policy" ioctl.
To make it clear that fscrypt_process_policy() and fscrypt_get_policy()
implement ioctls and therefore their implementations must take standard
security and correctness precautions, rename them to
fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the
latter take in a struct file * to make it consistent with the former.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: disable pwsalt ioctl when encryption disabled by config

On a CONFIG_EXT4_FS_ENCRYPTION=n kernel, the ioctls to get and set
encryption policies were disabled but EXT4_IOC_GET_ENCRYPTION_PWSALT was
not. But there's no good reason to expose the pwsalt ioctl if the
kernel doesn't support encryption. The pwsalt ioctl was also disabled
pre-4.8 (via ext4_sb_has_crypto() previously returning 0 when encryption
was disabled by config) and seems to have been enabled by mistake when
ext4 encryption was refactored to use fs/crypto/. So let's disable it
again.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: get rid of ext4_sb_has_crypto()

ext4_sb_has_crypto() just called through to ext4_has_feature_encrypt(),
and all callers except one were already using the latter. So remove it
and switch its one caller to ext4_has_feature_encrypt().

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: be more strict when verifying flags set via SETFLAGS ioctls

Currently we just silently ignore flags that we don't understand (or
that cannot be manipulated) through EXT4_IOC_SETFLAGS and
EXT4_IOC_FSSETXATTR ioctls. This makes it problematic for the unused
flags to be used in future (some app may be inadvertedly setting them
and we won't notice until the flag gets used). Also this is inconsistent
with other filesystems like XFS or BTRFS which return EOPNOTSUPP when
they see a flag they cannot set.

ext4 has the additional problem that there are flags which are returned
by EXT4_IOC_GETFLAGS ioctl but which cannot be modified via
EXT4_IOC_SETFLAGS. So we have to be careful to ignore value of these
flags and not fail the ioctl when they are set (as e.g. chattr(1) passes
flags returned from EXT4_IOC_GETFLAGS to EXT4_IOC_SETFLAGS without any
masking and thus we'd break this utility).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add EXT4_JOURNAL_DATA_FL and EXT4_EXTENTS_FL to modifiable mask

Add EXT4_JOURNAL_DATA_FL and EXT4_EXTENTS_FL to EXT4_FL_USER_MODIFIABLE
to recognize that they are modifiable by userspace. So far we got away
without having them there because ext4_ioctl_setflags() treats them in a
special way. But it was really confusing like that.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use current_time() for inode timestamps

CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.

current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().

Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

ext4: allow ext4_truncate() to return an error

This allows us to properly propagate errors back up to
ext4_truncate()'s callers. This also means we no longer have to
silently ignore some errors (e.g., when trying to add the inode to the
orphan inode list).

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

ext4: require encryption feature for EXT4_IOC_SET_ENCRYPTION_POLICY

...otherwise an user can enable encryption for certain files even
when the filesystem is unable to support it.
Such a case would be a filesystem created by mkfs.ext4's default
settings, 1KiB block size. Ext4 supports encyption only when block size
is equal to PAGE_SIZE.
But this constraint is only checked when the encryption feature flag
is set.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unused definition for MAX_32_NUM

MAX_32_NUM isn't used in ext4

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypto: require write access to mount to set encryption policy

Since setting an encryption policy requires writing metadata to the
filesystem, it should be guarded by mnt_want_write/mnt_drop_write.
Otherwise, a user could cause a write to a frozen or readonly
filesystem. This was handled correctly by f2fs but not by ext4. Make
fscrypt_process_policy() handle it rather than relying on the filesystem
to get it right.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs}
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>

ext4: remove old feature helpers

Use the ext4_{has,set,clear}_feature_* helpers to replace the old
feature helpers.

Signed-off-by: Kaho Ng <ngkaho1234@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

ext4 crypto: migrate into vfs's crypto engine

This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix project quota accounting without quota limits enabled

We should always transfer quota accounting, regardless of whether
quota limits are enabled.

Steps to reproduce:
# mkfs.ext4 /dev/sda4 -O quota,project
# mount /dev/sda4 /mnt/test
# cp /bin/bash /mnt/test
# chattr -p 123 /mnt/test/bash
# quota -v -P 123

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

lib/uuid.c: move generate_random_uuid() to uuid.c

Let's gather the UUID related functions under one hood.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: fix check of dqget() return value in ext4_ioctl_setproject()

A failed call to dqget() returns an ERR_PTR() and not null. Fix
the check in ext4_ioctl_setproject() to handle this correctly.

Fixes: 9b7365fc1c82 ("ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support")
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

ext4: online defrag not supported with DAX

Online defrag operations for ext4 are hard coded to use the page cache.
See ext4_ioctl() -> ext4_move_extents() -> move_extent_per_page()

When combined with DAX I/O, which circumvents the page cache, this can
result in data corruption. This was observed with xfstests ext4/307 and
ext4/308.

Fix this by only allowing online defrag for non-DAX files.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: ioctl: fix erroneous return value

The ext4_ioctl_setflags() function which is used in the ioctls
EXT4_IOC_SETFLAGS and EXT4_IOC_FSSETXATTR may return the positive value
EPERM instead of -EPERM in case of error. This bug was introduced by a
recent commit 9b7365fc.

The following program can be used to illustrate the wrong behavior:

#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <err.h>

#define FS_IOC_GETFLAGS _IOR('f', 1, long)
#define FS_IOC_SETFLAGS _IOW('f', 2, long)
#define FS_IMMUTABLE_FL 0x00000010

int main(void)
{
int fd;
long flags;

fd = open("file", O_RDWR|O_CREAT, 0600);
if (fd < 0)
err(1, "open");

if (ioctl(fd, FS_IOC_GETFLAGS, &flags) < 0)
err(1, "ioctl: FS_IOC_GETFLAGS");

flags |= FS_IMMUTABLE_FL;

if (ioctl(fd, FS_IOC_SETFLAGS, &flags) < 0)
err(1, "ioctl: FS_IOC_SETFLAGS");

warnx("ioctl returned no error");

return 0;
}

Running it gives the following result:

$ strace -e ioctl ./test
ioctl(3, FS_IOC_GETFLAGS, 0x7ffdbd8bfd38) = 0
ioctl(3, FS_IOC_SETFLAGS, 0x7ffdbd8bfd38) = 1
test: ioctl returned no error
+++ exited with 0 +++

Running the program on a kernel with the bug fixed gives the proper result:

$ strace -e ioctl ./test
ioctl(3, FS_IOC_GETFLAGS, 0x7ffdd2768258) = 0
ioctl(3, FS_IOC_SETFLAGS, 0x7ffdd2768258) = -1 EPERM (Operation not permitted)
test: ioctl: FS_IOC_SETFLAGS: Operation not permitted
+++ exited with 1 +++

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

wrappers for ->i_mutex access

parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support

This patch adds FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR ioctl interface
support for ext4. The interface is kept consistent with
XFS_IOC_FSGETXATTR/XFS_IOC_FSGETXATTR.

Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>

ext4: clean up feature test macros with predicate functions

Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

ioctl_compat: handle FITRIM

The FITRIM ioctl has the same arguments on 32-bit and 64-bit
architectures, so we can add it to the list of compatible ioctls and
drop it from compat_ioctl method of various filesystems.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ted Ts'o <tytso@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: use swap() in memswap()

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: fix sparse warnings in fs/ext4/ioctl.c

[ Added another sparse fix for EXT4_IOC_GET_ENCRYPTION_POLICY while
we're at it. --tytso ]

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: add encryption policy and password salt support

Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>

ext4: remove unused header files

Remove unused header files and header files which are included in
ext4.h.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: move handling of list of shrinkable inodes into extent status code

Currently callers adding extents to extent status tree were responsible
for adding the inode to the list of inodes with freeable extents. This
is error prone and puts list handling in unnecessarily many places.

Just add inode to the list automatically when the first non-delay extent
is added to the tree and remove inode from the list when the last
non-delay extent is removed.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: change LRU to round-robin in extent status tree shrinker

In this commit we discard the lru algorithm for inodes with extent
status tree because it takes significant effort to maintain a lru list
in extent status tree shrinker and the shrinker can take a long time to
scan this lru list in order to reclaim some objects.

We replace the lru ordering with a simple round-robin. After that we
never need to keep a lru list. That means that the list needn't be
sorted if the shrinker can not reclaim any objects in the first round.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Replace open coded mdata csum feature to helper function

Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized csum machinery.

#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END

# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)

https://bugzilla.kernel.org/show_bug.cgi?id=82201

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT

Otherwise this provokes complain like follows:
WARNING: CPU: 12 PID: 5795 at fs/ext4/ext4_jbd2.c:48 ext4_journal_check_start+0x4e/0xa0()
Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 5795 Comm: python Not tainted 3.17.0-rc2-00175-gae5344f #158
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011
0000000000000030 ffff8808116cfd28 ffffffff815c7dfc 0000000000000030
0000000000000000 ffff8808116cfd68 ffffffff8106ce8c ffff8808116cfdc8
ffff880813b16000 ffff880806ad6ae8 ffffffff81202008 0000000000000000
Call Trace:
[<ffffffff815c7dfc>] dump_stack+0x51/0x6d
[<ffffffff8106ce8c>] warn_slowpath_common+0x8c/0xc0
[<ffffffff81202008>] ? ext4_ioctl+0x9e8/0xeb0
[<ffffffff8106ceda>] warn_slowpath_null+0x1a/0x20
[<ffffffff8122867e>] ext4_journal_check_start+0x4e/0xa0
[<ffffffff81228c10>] __ext4_journal_start_sb+0x90/0x110
[<ffffffff81202008>] ext4_ioctl+0x9e8/0xeb0
[<ffffffff8107b0bd>] ? ptrace_stop+0x24d/0x2f0
[<ffffffff81088530>] ? alloc_pid+0x480/0x480
[<ffffffff8107b1f2>] ? ptrace_do_notify+0x92/0xb0
[<ffffffff81186545>] do_vfs_ioctl+0x4e5/0x550
[<ffffffff815cdbcb>] ? _raw_spin_unlock_irq+0x2b/0x40
[<ffffffff81186603>] SyS_ioctl+0x53/0x80
[<ffffffff815ce2ce>] tracesys+0xd0/0xd5

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4: clean up error handling in swap_inode_boot_loader()

Tighten up the code to make the code easier to read and maintain.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: fix error paths in swap_inode_boot_loader()

In swap_inode_boot_loader() we forgot to release ->i_mutex and resume
unlocked dio for inode and inode_bl if there is an error starting the
journal handle. This commit fixes this issue.

Reported-by: Ahmed Tamrawi <ahmedtamrawi@gmail.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org # v3.10+

ext4: delete "set but not used" variables

Signed-off-by: Jon Ernst <jonernst07@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>

vfs: pull ext4's double-i_mutex-locking into common code

We want to do this elsewhere as well.

Also catch any attempts to use it for directories (where this ordering
would conflict with ancestor-first directory ordering in lock_rename).

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: isolate ext4_extents.h file

After applied the commit (4a092d73), we have reduced the number of
source files that need to #include ext4_extents.h. But we can do
better.

This commit defines ext4_zeroout_es() in extents.c and move
EXT_MAX_BLOCKS into ext4.h in order not to include ext4_extents.h in
indirect.c and ioctl.c. Meanwhile we just need to include this file in
extent_status.c when ES_AGGRESSIVE_TEST is defined. Otherwise, this
commit removes a duplicated declaration in trace/events/ext4.h.

After applied this patch, we just need to include ext4_extents.h file
in {super,migrate,move_extents,extents}.c, and it is easy for us to
define a new extent disk layout.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: add support for extent pre-caching

Add a new fiemap flag which forces the all of the extents in an inode
to be cached in the extent_status tree. This is critically important
when using AIO to a preallocated file, since if we need to read in
blocks from the extent tree, the io_submit(2) system call becomes
synchronous, and the AIO is no longer "A", which is bad.

In addition, for most files which have an external leaf tree block,
the cost of caching the information in the extent status tree will be
less than caching the entire 4k block in the buffer cache. So it is
generally a win to keep the extent information cached.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT

Previously we weren't swapping only some of the extent_status LRU
fields during the processing of the EXT4_IOC_SWAP_BOOT ioctl. The
much safer thing to do is to just completely flush the extent status
tree when doing the swap.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Cc: stable@vger.kernel.org

ext4: fix usless declarations

This patch should fix sparse complains about shadow declatations.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: implementation of a new ioctl called EXT4_IOC_SWAP_BOOT

Add a new ioctl, EXT4_IOC_SWAP_BOOT which swaps i_blocks and
associated attributes (like i_blocks, i_size, i_flags, ...) from the
specified inode with inode EXT4_BOOT_LOADER_INO (#5). This is
typically used to store a boot loader in a secure part of the
filesystem, where it can't be changed by a normal user by accident.
The data blocks of the previous boot loader will be associated with
the given inode.

This usercode program is a simple example of the usage:

int main(int argc, char *argv[])
{
int fd;
int err;

if ( argc != 2 ) {
printf("usage: ext4-swap-boot-inode FILE-TO-SWAP\n");
exit(1);
}

fd = open(argv[1], O_WRONLY);
if ( fd < 0 ) {
perror("open");
exit(1);
}

err = ioctl(fd, EXT4_IOC_SWAP_BOOT);
if ( err < 0 ) {
perror("ioctl");
exit(1);
}

close(fd);
exit(0);
}

[ Modified by Theodore Ts'o to fix a number of bugs in the original code.]

Signed-off-by: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: support simple conversion of extent-mapped inodes to use i_blocks

In order to make it simpler to test the code which support
i_blocks/indirect-mapped inodes, support the conversion of inodes
which are less than 12 blocks and which are contained in no more than
a single extent.

The primary intended use of this code is to converting freshly created
zero-length files and empty directories.

Note that the version of chattr in e2fsprogs 1.42.7 and earlier has a
check that prevents the clearing of the extent flag. A simple patch
which allows "chattr -e <file>" to work will be checked into the
e2fsprogs git repository.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

new helper: file_inode(file)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: pass context information to jbd2__journal_start()

So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.

The recommended way for finding the longer-running handles is:

T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable

./run-my-fs-benchmark

cat $T/trace > /tmp/problem-handles

This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:

postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: trigger the lazy inode table initialization after resize

After we have finished extending the file system, we need to trigger a
the lazy inode table thread to zero out the inode tables.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails

When the EXT4_IOC_MOVE_EXT ioctl() fails on bigalloc file systems, we
should jump to the 'mext_out' label to release the donor file reference.

Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: enable FITRIM ioctl on bigalloc file system

With a minor tweaks regarding minimum extent size to discard and
discarded bytes reporting the FITRIM can be enabled on bigalloc file
system and it works without any problem.

This patch fixes minlen handling and discarded bytes reporting to
take into consideration bigalloc enabled file systems and finally
removes the restriction and allow FITRIM to be used on file system with
bigalloc feature enabled.

Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

switch simple cases of fget_light to fdget

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch EXT4_IOC_MOVE_EXT to fget_light()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: close struct file leak on EXT4_IOC_MOVE_EXT

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: add online resizing support for meta_bg and 64-bit file systems

This patch adds support for resizing file systems with the meta_bg and
64bit features.

[ Added a fix by tytso to fix a divide by zero when resizing a
filesystem from 14 TB to 18TB. Also fixed overhead accounting for
meta_bg file systems.]

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: fix ext4 mismerge back in January

Duplicate caused, AFAICS, by mismerge in
ff9cb1c4eead5e4c292e75cd3170a82d66944101>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: fix duplicated mnt_drop_write call in EXT4_IOC_MOVE_EXT

Caused, AFAICS, by mismerge in commit ff9cb1c4eead ("Merge branch
'for_linus' into for_linus_merged")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: don't set i_flags in EXT4_IOC_SETFLAGS

Commit 7990696 uses the ext4_{set,clear}_inode_flags() functions to
change the i_flags automatically but fails to remove the error setting
of i_flags. So we still have the problem of trashing state flags.
Fix this by removing the assignment.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

ext4: don't trash state flags in EXT4_IOC_SETFLAGS

In commit 353eb83c we removed i_state_flags with 64-bit longs, But
when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags
directly, which trashes the state flags which are stored in the high
32-bits of i_flags on 64-bit platforms. So use the the
ext4_{set,clear}_inode_flags() functions which use atomic bit
manipulation functions instead.

Reported-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

ext4: calculate and verify inode checksums

This patch introduces to ext4 the ability to calculate and verify
inode checksums. This requires the use of a new ro compatibility flag
and some accompanying e2fsprogs patches to provide the relevant
features in tune2fs and e2fsck. The inode generation changes have
been integrated into this patch.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext{3,4}: Fix potential race when setversion ioctl updates inode

The EXT{3,4}_IOC_SETVERSION ioctl() updates i_ctime and i_generation
without i_mutex. This can lead to a race with the other operations that
update i_ctime. This is not a big issue but let's make the ioctl consistent
with how we handle e.g. other timestamp updates and use i_mutex to protect
inode changes.

Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

ext4: add missing ext4_resize_end on error paths

Online resize ioctls 'EXT4_IOC_GROUP_EXTEND' and 'EXT4_IOC_GROUP_ADD'
call ext4_resize_begin() to check permissions and to set the
EXT4_RESIZING bit lock, they do their work and they must finish with
ext4_resize_end() which calls clear_bit_unlock() to unlock and to
avoid -EBUSY errors for the next resize operations.

This patch adds the missing ext4_resize_end() calls on error paths.

Patch tested.

Cc: stable@vger.kernel.org
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: add new online resize interface

This patch adds new online resize interface, whose input argument is a
64-bit integer indicating how many blocks there are in the resized fs.

In new resize impelmentation, all work like allocating group tables
are done by kernel side, so the new resize interface can support
flex_bg feature and prepares ground for suppoting resize with features
like bigalloc and exclude bitmap. Besides these, user-space tools just
passes in the new number of blocks.

We delay initializing the bitmaps and inode tables of added groups if
possible and add multi groups (a flex groups) each time, so new resize
is very fast like mkfs.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

vfs: mnt_drop_write_file()

new helper (wrapper around mnt_drop_write()) to be used in pair with
mnt_want_write_file().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

switch a bunch of places to mnt_want_write_file()

it's both faster (in case when file has been opened for write) and cleaner.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: remove unneeded file_remove_suid() from ext4_ioctl()

In the code to support EXT4_IOC_MOVE_EXT, ext4_ioctl calls
file_remove_suid() after the call to ext4_move_extents() if any
extents has been moved. There are at least three things wrong with
this. First, file_remove_suid() should be called with i_mutex down,
which is not here. Second, it should be called before the donor file
has been modified, to avoid a potential race condition. Third, and
most importantly, it's pointless, because ext4_file_extents() already
checks if the donor file has the setuid or setgid bit set, and will
return an error in that case. So the first two objections don't
really matter, since file_remove_suid() will never need to modify the
inode in any case.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: add __user decoration to calls of copy_{from,to}_user()

This quiets the sparse noise:

warning: incorrect type in argument 2 (different address spaces)
expected void const [noderef] <asn:1>*from
got struct fstrim_range *<noident>
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:1>*to
got struct fstrim_range *<noident>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: remove the obsolete/broken EXT4_IOC_WAIT_FOR_READONLY ioctl

There are no users of the EXT4_IOC_WAIT_FOR_READONLY ioctl, and it is
also broken. No one sets the set_ro_timer, no one wakes up us and our
state is set to TASK_INTERRUPTIBLE not RUNNING. So remove it.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: enforce bigalloc restrictions (e.g., no online resizing, etc.)

At least initially if the bigalloc feature is enabled, we will not
support non-extent mapped inodes, online resizing, online defrag, or
the FITRIM ioctl. This simplifies the initial implementation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: prevent parallel resizers by atomic bit ops

Before this patch, parallel resizers are allowed and protected by a
mutex lock, actually, there is no need to support parallel resizer, so
this patch prevents parallel resizers by atmoic bit ops, like
lock_page() and unlock_page() do.

To do this, the patch removed the mutex lock s_resize_lock from struct
ext4_sb_info and added a unsigned long field named s_resize_flags
which inidicates if there is a resizer.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

userns: rename is_owner_or_cap to inode_owner_or_capable

And give it a kernel-doc comment.

[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: add FITRIM to compat_ioctl.

FITRIM isn't added in compat_ioctl. So a 32 bit program can't be executed
in a 64 bit platform. Add it in the compat_ioctl.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Adjust minlen with discard_granularity in the FITRIM ioctl

Discard granularity tells us the minimum size of extent that can be
discarded by the device. If the user supplies a minimum extent that
should be discarded (range.minlen) which is smaller than the discard
granularity, increase minlen to the discard granularity, since there's
no point submitting trim requests that the device will reject anyway.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: check if device support discard in FITRIM ioctl

For a device that does not support discard, the FITRIM ioctl returns
-EOPNOTSUPP when blkdev_issue_discard() returns this error code, which
is how the user is informed that the device does not support discard.

If there are no suitable free extents to be trimmed, then FITRIM will
return success even though the device does not support discard, which
could confuse the user. So check explicitly if the device supports
discard and return an error code at the beginning of the FITRIM ioctl
processing.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard

Filesystem independent ioctl was rejected as not common enough to be in
core vfs ioctl. Since we still need to access to this functionality this
commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch
ext4_trim_fs().

It takes fstrim_range structure as an argument. fstrim_range is definec in
the include/linux/fs.h and its definition is as follows.

struct fstrim_range {
__u64 start;
__u64 len;
__u64 minlen;
}

start - first Byte to trim
len - number of Bytes to trim from start
minlen - minimum extent length to trim, free extents shorter than this
number of Bytes will be ignored. This will be rounded up to fs
block size.

After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Drop whitespace at end of lines

This patch was generated using:

#!/usr/bin/perl -i
while (<>) {
s/[ ]+$//;
print;
}

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Fix compat EXT4_IOC_ADD_GROUP

struct ext4_new_group_input needs to be converted because u64 has
only 32-bit alignment on some 32-bit architectures, notably i386.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: allow defrag (EXT4_IOC_MOVE_EXT) in 32bit compat mode

I have an x86_64 kernel with i386 userspace. e4defrag fails on the
EXT4_IOC_MOVE_EXT ioctl because it is not wired up for the compat
case. It seems that struct move_extent is compat save, only types
with fixed widths are used:
{
__u32 reserved; /* should be zero */
__u32 donor_fd; /* donor file descriptor */
__u64 orig_start; /* logical start offset in block for orig */
__u64 donor_start; /* logical start offset in block for donor */
__u64 len; /* block length to be moved */
__u64 moved_len; /* moved block length */
};

Lets just wire up EXT4_IOC_MOVE_EXT for the compat case.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
CC: Akira Fujita <a-fujita@rs.jp.nec.com>

ext4: Code cleanup for EXT4_IOC_MOVE_EXT ioctl

a) Fix sparse warning in ext4_ioctl()
b) Remove unneeded variable in mext_leaf_block()
c) Fix spelling typo in mext_check_arguments()

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Add flag to files with blocks intentionally past EOF

fallocate() may potentially instantiate blocks past EOF, depending
on the flags used when it is called.

e2fsck currently has a test for blocks past i_size, and it
sometimes trips up - noticeably on xfstests 013 which runs fsstress.

This patch from Jiayang does fix it up - it (along with
e2fsprogs updates and other patches recently from Aneesh) has
survived many fsstress runs in a row.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT

This patch fixes three problems in the handling of the
EXT4_IOC_MOVE_EXT ioctl:

1. In current EXT4_IOC_MOVE_EXT, there are read access mode checks for
original and donor files, but they allow the illegal write access to
donor file, since donor file is overwritten by original file data. To
fix this problem, change access mode checks of original (r->r/w) and
donor (r->w) files.

2. Disallow the use of donor files that have a setuid or setgid bits.

3. Call mnt_want_write() and mnt_drop_write() before and after
ext4_move_extents() calling to get write access to a mount.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: initialize moved_len before calling ext4_move_extents()

The move_extent.moved_len is used to pass back the number of exchanged
blocks count to user space. Currently the caller must clear this
field; but we spend more code space checking for this requirement than
simply zeroing the field ourselves, so let's just make life easier for
everyone all around.

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Return exchanged blocks count to user space in failure

Return exchanged blocks count (moved_len) to user space,
if ext4_move_extents() failed on the way.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: fix null handler of ioctls in no journal mode

The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode. Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:

BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000
Oops: 0002 [#1] SMP

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

headers: smp_lock.h redux

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: online defrag -- Add EXT4_IOC_MOVE_EXT ioctl

The EXT4_IOC_MOVE_EXT exchanges the blocks between orig_fd and donor_fd,
and then write the file data of orig_fd to donor_fd.
ext4_mext_move_extent() is the main fucntion of ext4 online defrag,
and this patch includes all functions related to ext4 online defrag.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl

Add an ioctl which forces all of the delay allocated blocks to be
allocated. This also provides a function ext4_alloc_da_blocks() which
will be used by the following commits to force files to be fully
allocated to preserve application-expected ext3 behaviour.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: tighten restrictions on inode flags

At the moment there are few restrictions on which flags may be set on
which inodes. Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links. Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.

Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Allow ext4 to run without a journal

A few weeks ago I posted a patch for discussion that allowed ext4 to run
without a journal. Since that time I've integrated the excellent
comments from Andreas and fixed several serious bugs. We're currently
running with this patch and generating some performance numbers against
both ext2 (with backported reservations code) and ext4 with and without
a journal. It just so happens that running without a journal is
slightly faster for most everything.

We did
iozone -T -t 4 s 2g -r 256k -T -I -i0 -i1 -i2

which creates 4 threads, each of which create and do reads and writes on
a 2G file, with a buffer size of 256K, using O_DIRECT for all file opens
to bypass the page cache. Results:

ext2 ext4, default ext4, no journal
initial writes 13.0 MB/s 15.4 MB/s 15.7 MB/s
rewrites 13.1 MB/s 15.6 MB/s 15.9 MB/s
reads 15.2 MB/s 16.9 MB/s 17.2 MB/s
re-reads 15.3 MB/s 16.9 MB/s 17.2 MB/s
random readers 5.6 MB/s 5.6 MB/s 5.7 MB/s
random writers 5.1 MB/s 5.3 MB/s 5.4 MB/s

So it seems that, so far, this was a useful exercise.

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: add checks for errors from jbd2

If the journal has aborted due to a checkpointing failure, we
have to keep the contents of the journal space. Otherwise, the
filesystem will lose uncheckpointed metadata completely and
become inconsistent. To avoid this, we need to keep needs_recovery
flag if checkpoint has failed.

With this patch, ext4_put_super() detects a checkpointing failure
from the return value of journal_destroy(), then it invokes
ext4_abort() to make the filesystem read only and keep
needs_recovery flag. Errors from jbd2_journal_flush() are also
handled by this patch in some places.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Remove old legacy block allocator

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: hook the ext3 migration interface to the EXT4_IOC_SETFLAGS ioctl

This patch hooks the ext3 to ext4 migrate interface to
EXT4_IOC_SETFLAGS ioctl. The userspace interface is via chattr +e. We
only allow setting extent flags. Clearing extent flag (migrating from
ext4 to ext3) is not supported.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: elevate write count for migrate ioctl

The migrate ioctl writes to the filsystem, so we need to elevate the
write count.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Fix whitespace checkpatch warnings/errors

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: move headers out of include/linux

Move ext4 headers out of include/linux. This is just the trivial move,
there's some more thing that could be done later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

[PATCH] r/o bind mounts: elevate write count for ioctls()

Some ioctl()s can cause writes to the filesystem. Take these, and make them
use mnt_want/drop_write() instead.

[AV: updated]

Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Convert ext4 to use unlocked_ioctl

I checked ext4_ioctl and it looked largely safe to not be used
without BKL. So convert it over to unlocked_ioctl.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Add EXT4_IOC_MIGRATE ioctl

The below patch add ioctl for migrating ext3 indirect block mapped inode
to ext4 extent mapped inode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

ext4: Convert truncate_mutex to read write semaphore.

We are currently taking the truncate_mutex for every read. This would have
performance impact on large CPU configuration. Convert the lock to read write
semaphore and take read lock when we are trying to read the file.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Forbid user to change file flags on quota files

Forbid user from changing file flags on quota files. User has no bussiness
in playing with these flags when quota is on. Furthermore there is a
remote possibility of deadlock due to a lock inversion between quota file's
i_mutex and transaction's start (i_mutex for quota file is locked only when
trasaction is started in quota operations) in ext3 and ext4.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: LIOU Payphone <lioupayphone@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: Add nanosecond timestamps

This patch adds nanosecond timestamps for ext4. This involves adding
*time_extra fields to the ext4_inode to extend the timestamps to
64-bits. Creation time is also added by this patch.

These extended fields will fit into an inode if the filesystem was
formatted with large inodes (-I 256 or larger) and there are currently
no EAs consuming all of the available space. For new inodes we always
reserve enough space for the kernel's known extended fields, but for
inodes created with an old kernel this might not have been the case. So
this patch also adds the EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature
flag(ro-compat so that older kernels can't create inodes with a smaller
extra_isize). which indicates if the fields fitting inside
s_min_extra_isize are available or not. If the expansion of inodes if
unsuccessful then this feature will be disabled. This feature is only
enabled if requested by the sysadmin.

None of the extended inode fields is critical for correct filesystem
operation.

Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: Fix CONFIG_JBD_DEBUG ifdef to be CONFIG_JBD2_DEBUG

When the JBD code was forked to create the new JBD2 code base, the
references to CONFIG_JBD_DEBUG where never changed to
CONFIG_JBD2_DEBUG. This patch fixes that.

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: copy i_flags to inode flags on write

Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into
ext4-specific i_flags. Quota code changes these flags on quota files
(to make it harder for sysadmin to screw himself) and these changes were
not correctly propagated into the filesystem.

(This is a forward port patch from ext3)

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Introduce is_owner_or_cap() to wrap CAP_FOWNER use with fsuid check

Introduce is_owner_or_cap() macro in fs.h, and convert over relevant
users to it. This is done because we want to avoid bugs in the future
where we check for only effective fsuid of the current task against a
file's owning uid, without simultaneously checking for CAP_FOWNER as
well, thus violating its semantics.
[ XFS uses special macros and structures, and in general looked ...
untouchable, so we leave it alone -- but it has been looked over. ]

The (current->fsuid != inode->i_uid) check in generic_permission() and
exec_permission_lite() is left alone, because those operations are
covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations
falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: Al Viro <viro@ftp.linux.org.uk>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ext4: change uses of f_{dentry, vfsmnt} to use f_path

Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext4
filesystem.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: add extent map support

On disk extents format:
/*
* this is extent on-disk structure
* it's used at the bottom of the tree
*/
struct ext3_extent {
__le32 ee_block; /* first logical block extent covers */
__le16 ee_len; /* number of blocks covered by extent */
__le16 ee_start_hi; /* high 16 bits of physical block */
__le32 ee_start; /* low 32 bigs of physical block */
};

Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbd

Reworked from a patch by Mingming Cao and Randy Dunlap

Signed-off-By: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbols

Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext4: initial copy of files from ext3

Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for
details.

This is a simple copy of the files in fs/ext3 to fs/ext4 and
/usr/incude/linux/ext3* to /usr/include/ex4*

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>