ext4: fix spelling errors in comments

'functoin' and 'entres' should be 'function' and 'entries' respectively

Signed-off-by: Chin Yik Ming <yikming2222@gmail.com>
Link: https://lore.kernel.org/r/20220402090744.8918-1-yikming2222@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unnecessary type castings

remove unnecessary void* type castings.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220401081321.73735-1-yuzhe@nfschina.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unnecessary 'offset' assignment

Although it is in the loop, offset is reassigned at the beginning of the
while loop. And after the loop, the value will not be used

The clang_analyzer complains as follows:

fs/ext4/dir.c:306:3 warning:

Value stored to 'offset' is never read

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211208075307.404703-1-luo.penghao@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix potential infinite loop in ext4_dx_readdir()

When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:

1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6

Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com

ext4: handle casefolding with encryption

This adds support for encryption with casefolding.

Since the name on disk is case preserving, and also encrypted, we can no
longer just recompute the hash on the fly. Additionally, to avoid
leaking extra information from the hash of the unencrypted name, we use
siphash via an fscrypt v2 policy.

The hash is stored at the end of the directory entry for all entries
inside of an encrypted and casefolded directory apart from those that
deal with '.' and '..'. This way, the change is backwards compatible
with existing ext4 filesystems.

[ Changed to advertise this feature via the file:
/sys/fs/ext4/features/encrypted_casefold -- TYT ]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210319073414.1381041-2-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unnecessary braces in fs/ext4/dir.c

Removes braces to follow the coding style.

Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Link: https://lore.kernel.org/r/20210316052953.67616-1-mdjurovic@zohomail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypt: Have filesystems handle their d_ops

This shifts the responsibility of setting up dentry operations from
fscrypt to the individual filesystems, allowing them to have their own
operations while still setting fscrypt's d_revalidate as appropriate.

Most filesystems can just use generic_set_encrypted_ci_d_ops, unless
they have their own specific dentry operations as well. That operation
will set the minimal d_ops required under the circumstances.

Since the fscrypt d_ops are set later on, we must set all d_ops there,
since we cannot adjust those later on. This should not result in any
change in behavior.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

fscrypt: introduce fscrypt_prepare_readdir()

The last remaining use of fscrypt_get_encryption_info() from filesystems
is for readdir (->iterate_shared()). Every other call is now in
fs/crypto/ as part of some other higher-level operation.

We need to add a new argument to fscrypt_get_encryption_info() to
indicate whether the encryption policy is allowed to be unrecognized or
not. Doing this is easier if we can work with high-level operations
rather than direct filesystem use of fscrypt_get_encryption_info().

So add a function fscrypt_prepare_readdir() which wraps the call to
fscrypt_get_encryption_info() for the readdir use case.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: remove ext4_dir_open()

Since encrypted directories can be opened and searched without their key
being available, and each readdir and ->lookup() tries to set up the
key, trying to set up the key in ->open() too isn't really useful.

Just remove it so that directories don't need an ->open() method
anymore, and so that we eliminate a use of fscrypt_get_encryption_info()
(which I'd like to stop exporting to filesystems).

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: use generic casefolding support

This switches ext4 over to the generic support provided in libfs.

Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use the normal helper to get the actual inode

Here we use the READ_ONCE to fix race conditions in ->d_compare() and
->d_hash() when they are called in RCU-walk mode, seems we can use
the normal helper d_inode_rcu() to get the actual inode.

Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/1602317416-1260-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypt: drop unused inode argument from fscrypt_fname_alloc_buffer

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200810142139.487631-1-jlayton@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: avoid utf8_strncasecmp() with unstable name

If the dentry name passed to ->d_compare() fits in dentry::d_iname, then
it may be concurrently modified by a rename. This can cause undefined
behavior (possibly out-of-bounds memory accesses or crashes) in
utf8_strncasecmp(), since fs/unicode/ isn't written to handle strings
that may be concurrently modified.

Fix this by first copying the filename to a stack buffer if needed.
This way we get a stable snapshot of the filename.

Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.2+
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Daniel Rosenberg <drosen@google.com>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200601200543.59417-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use flexible-array member in struct fname

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200309154838.GA31559@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix checksum errors with indexed dirs

DIR_INDEX has been introduced as a compat ext4 feature. That means that
even kernels / tools that don't understand the feature may modify the
filesystem. This works because for kernels not understanding indexed dir
format, internal htree nodes appear just as empty directory entries.
Index dir aware kernels then check the htree structure is still
consistent before using the data. This all worked reasonably well until
metadata checksums were introduced. The problem is that these
effectively made DIR_INDEX only ro-compatible because internal htree
nodes store checksums in a different place than normal directory blocks.
Thus any modification ignorant to DIR_INDEX (or just clearing
EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch
and trigger kernel errors. So we have to be more careful when dealing
with indexed directories on filesystems with checksumming enabled.

1) We just disallow loading any directory inodes with EXT4_INDEX_FL when
DIR_INDEX is not enabled. This is harsh but it should be very rare (it
means someone disabled DIR_INDEX on existing filesystem and didn't run
e2fsck), e2fsck can fix the problem, and we don't want to answer the
difficult question: "Should we rather corrupt the directory more or
should we ignore that DIR_INDEX feature is not set?"

2) When we find out htree structure is corrupted (but the filesystem and
the directory should in support htrees), we continue just ignoring htree
information for reading but we refuse to add new entries to the
directory to avoid corrupting it more.

Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz
Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix race conditions in ->d_compare() and ->d_hash()

Since ->d_compare() and ->d_hash() can be called in RCU-walk mode,
->d_parent and ->d_inode can be concurrently modified, and in
particular, ->d_inode may be changed to NULL. For ext4_d_hash() this
resulted in a reproducible NULL dereference if a lookup is done in a
directory being deleted, e.g. with:

int main()
{
if (fork()) {
for (;;) {
mkdir("subdir", 0700);
rmdir("subdir");
}
} else {
for (;;)
access("subdir/file", 0);
}
}

... or by running the 't_encrypted_d_revalidate' program from xfstests.
Both repros work in any directory on a filesystem with the encoding
feature, even if the directory doesn't actually have the casefold flag.

I couldn't reproduce a crash in ext4_d_compare(), but it appears that a
similar crash is possible there.

Fix these bugs by reading ->d_parent and ->d_inode using READ_ONCE() and
falling back to the case sensitive behavior if the inode is NULL.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200124041234.159740-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unnecessary assignment in ext4_htree_store_dirent()

We have allocated memory using kzalloc() so don't have
to set 0 again in last byte.

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Link: https://lore.kernel.org/r/20191206054317.3107-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypt: don't check for ENOKEY from fscrypt_get_encryption_info()

fscrypt_get_encryption_info() returns 0 if the encryption key is
unavailable; it never returns ENOKEY. So remove checks for ENOKEY.

Link: https://lore.kernel.org/r/20191209212348.243331-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: optimize __ext4_check_dir_entry()

Make __ext4_check_dir_entry() a bit easier to understand, and reduce
the object size of the function by over 11%.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20191209004346.38526-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: check for directory entries too close to block end

ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix kernel oops caused by spurious casefold flag

If an directory has the a casefold flag set without the casefold
feature set, s_encoding will not be initialized, and this will cause
the kernel to dereference a NULL pointer. In addition to adding
checks to avoid these kernel oops, attempts to load inodes with the
casefold flag when the casefold feature is not enable will cause the
file system to be declared corrupted.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: rename "dirent_csum" functions to use "dirblock"

Functions such as ext4_dirent_csum_verify() and ext4_dirent_csum_set()
don't actually operate on a directory entry, but a directory block.
And while they take a struct ext4_dir_entry *dirent as an argument, it
had better be the first directory at the beginning of the direct
block, or things will go very wrong.

Rename the following functions so that things make more sense, and
remove a lot of confusing casts along the way:

ext4_dirent_csum_verify -> ext4_dirblock_csum_verify
ext4_dirent_csum_set -> ext4_dirblock_csum_set
ext4_dirent_csum -> ext4_dirblock_csum
ext4_handle_dirty_dirent_node -> ext4_handle_dirty_dirblock

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: allow directory holes

The largedir feature was intended to allow ext4 directories to have
unmapped directory blocks (e.g., directory holes). And so the
released e2fsprogs no longer enforces this for largedir file systems;
however, the corresponding change to the kernel-side code was not made.

This commit fixes this oversight.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: optimize case-insensitive lookups

Temporarily cache a casefolded version of the file name under lookup in
ext4_filename, to avoid repeatedly casefolding it. I got up to 30%
speedup on lookups of large directories (>100k entries), depending on
the length of the string under lookup.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: clean up kerneldoc warnigns when building with W=1

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix dcache lookup of !casefolded directories

Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk. it was introduced in the last iteration of the
case-insensitive patch.

d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.

Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Support case-insensitive file name lookups

This patch implements the actual support for case-insensitive file name
lookups in ext4, based on the feature bit and the encoding stored in the
superblock.

A filesystem that has the casefold feature set is able to configure
directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups
to succeed in that directory in a case-insensitive fashion, i.e: match
a directory entry even if the name used by userspace is not a byte per
byte match with the disk name, but is an equivalent case-insensitive
version of the Unicode string. This operation is called a
case-insensitive file name lookup.

The feature is configured as an inode attribute applied to directories
and inherited by its children. This attribute can only be enabled on
empty directories for filesystems that support the encoding feature,
thus preventing collision of file names that only differ by case.

* dcache handling:

For a +F directory, Ext4 only stores the first equivalent name dentry
used in the dcache. This is done to prevent unintentional duplication of
dentries in the dcache, while also allowing the VFS code to quickly find
the right entry in the cache despite which equivalent string was used in
a previous lookup, without having to resort to ->lookup().

d_hash() of casefolded directories is implemented as the hash of the
casefolded string, such that we always have a well-known bucket for all
the equivalencies of the same string. d_compare() uses the
utf8_strncasecmp() infrastructure, which handles the comparison of
equivalent, same case, names as well.

For now, negative lookups are not inserted in the dcache, since they
would need to be invalidated anyway, because we can't trust missing file
dentries. This is bad for performance but requires some leveraging of
the vfs layer to fix. We can live without that for now, and so does
everyone else.

* on-disk data:

Despite using a specific version of the name as the internal
representation within the dcache, the name stored and fetched from the
disk is a byte-per-byte match with what the user requested, making this
implementation 'name-preserving'. i.e. no actual information is lost
when writing to storage.

DX is supported by modifying the hashes used in +F directories to make
them case/encoding-aware. The new disk hashes are calculated as the
hash of the full casefolded string, instead of the string directly.
This allows us to efficiently search for file names in the htree without
requiring the user to provide an exact name.

* Dealing with invalid sequences:

By default, when a invalid UTF-8 sequence is identified, ext4 will treat
it as an opaque byte sequence, ignoring the encoding and reverting to
the old behavior for that unique file. This means that case-insensitive
file name lookup will not work only for that file. An optional bit can
be set in the superblock telling the filesystem code and userspace tools
to enforce the encoding. When that optional bit is set, any attempt to
create a file name using an invalid UTF-8 sequence will fail and return
an error to userspace.

* Normalization algorithm:

The UTF-8 algorithms used to compare strings in ext4 is implemented
lives in fs/unicode, and is based on a previous version developed by
SGI. It implements the Canonical decomposition (NFD) algorithm
described by the Unicode specification 12.1, or higher, combined with
the elimination of ignorable code points (NFDi) and full
case-folding (CF) as documented in fs/unicode/utf8_norm.c.

NFD seems to be the best normalization method for EXT4 because:

- It has a lower cost than NFC/NFKC (which requires
decomposing to NFD as an intermediary step)
- It doesn't eliminate important semantic meaning like
compatibility decompositions.

Although:

- This implementation is not completely linguistic accurate, because
different languages have conflicting rules, which would require the
specialization of the filesystem to a given locale, which brings all
sorts of problems for removable media and for users who use more than
one language.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypt: remove filesystem specific build config option

In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: use IS_ENCRYPTED() to check encryption status

This commit removes the ext4 specific ext4_encrypted_inode() and makes
use of the generic IS_ENCRYPTED() macro to check for the encryption
status of an inode.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>

ext4: avoid divide by zero fault when deleting corrupted inline directories

A specially crafted file system can trick empty_inline_dir() into
reading past the last valid entry in a inline directory, and then run
into the end of xattr marker. This will trigger a divide by zero
fault. Fix this by using the size of the inline directory instead of
dir->i_size.

Also clean up error reporting in __ext4_check_dir_entry so that the
message is clearer and more understandable --- and avoids the division
by zero trap if the size passed in is zero. (I'm not sure why we
coded it that way in the first place; printing offset % size is
actually more confusing and less useful.)

https://bugzilla.kernel.org/show_bug.cgi?id=200933

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org

ext4: force revalidation of directory pointer after seekdir(2)

A malicious user could force the directory pointer to be in an invalid
spot by using seekdir(2). Use the mechanism we already have to notice
if the directory has changed since the last time we called
ext4_readdir() to force a revalidation of the pointer.

Reported-by: syzbot+1236ce66f79263e8a862@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

iversion: Rename make inode_cmp_iversion{+raw} to inode_eq_iversion{+raw}

The function inode_cmp_iversion{+raw} is counter-intuitive, because it
returns true when the counters are different and false when these are equal.

Rename it to inode_eq_iversion{+raw}, which will returns true when
the counters are equal and false otherwise.

Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: Jeff Layton <jlayton@redhat.com>

ext4: convert to new i_version API

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use sizeof(*ptr)

Replace the specification of data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>

ext4: remove unused variable

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

fscrypto: make filename crypto functions return 0 on success

Several filename crypto functions: fname_decrypt(),
fscrypt_fname_disk_to_usr(), and fscrypt_fname_usr_to_disk(), returned
the output length on success or -errno on failure. However, the output
length was redundant with the value written to 'oname->len'. It is also
potentially error-prone to make callers have to check for '< 0' instead
of '!= 0'.

Therefore, make these functions return 0 instead of a length, and make
the callers who cared about the return value being a length use
'oname->len' instead. For consistency also make other callers check for
a nonzero result rather than a negative result.

This change also fixes the inconsistency of fname_encrypt() actually
already returning 0 on success, not a length like the other filename
crypto functions and as documented in its function comment.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>

ext4 crypto: migrate into vfs's crypto engine

This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: switch to ->iterate_shared()

Note that we need relax_dir() equivalent for directories
locked shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: allow readdir()'s of large empty directories to be interrupted

If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations. Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().

This was reverted earlier due to a typo in the original commit where I
experimented with using signal_pending() instead of
fatal_signal_pending(). The test was in the wrong place if we were
going to return signal_pending() since we would end up returning
duplicant entries. See 9f2394c9be47 for a more detailed explanation.

Added fix as suggested by Linus to check for signal_pending() in
in the filldir() functions.

Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Revert "ext4: allow readdir()'s of large empty directories to be interrupted"

This reverts commit 1028b55bafb7611dda1d8fed2aeca16a436b7dff.

It's broken: it makes ext4 return an error at an invalid point, causing
the readdir wrappers to write the the position of the last successful
directory entry into the position field, which means that the next
readdir will now return that last successful entry _again_.

You can only return fatal errors (that terminate the readdir directory
walk) from within the filesystem readdir functions, the "normal" errors
(that happen when the readdir buffer fills up, for example) happen in
the iterorator where we know the position of the actual failing entry.

I do have a very different patch that does the "signal_pending()"
handling inside the iterator function where it is allowable, but while
that one passes all the sanity checks, I screwed up something like four
times while emailing it out, so I'm not going to commit it today.

So my track record is not good enough, and the stars will have to align
better before that one gets committed. And it would be good to get some
review too, of course, since celestial alignments are always an iffy
debugging model.

IOW, let's just revert the commit that caused the problem for now.

Reported-by: Greg Thelen <gthelen@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized. And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special. They are
not.

The changes are pretty straight-forward:

- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

- page_cache_get() -> get_page();

- page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: allow readdir()'s of large empty directories to be interrupted

If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations. Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().

Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: in ext4_dir_llseek, check syscall bitness directly

ext4 treats directory offsets differently for 32-bit and 64-bit callers.
Check the caller type using in_compat_syscall, not is_compat_task. This
changes behavior on SPARC slightly.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: fix memleak in ext4_readdir()

When ext4_bread() fails, fname_crypto_str remains
allocated after return. Fix that.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CC: Dmitry Monakhov <dmonakhov@virtuozzo.com>

ext4 crypto: revalidate dentry after adding or removing the key

Add a validation check for dentries for encrypted directory to make
sure we're not caching stale data after a key has been added or removed.

Also check to make sure that status of the encryption key is updated
when readdir(2) is executed.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: clean up feature test macros with predicate functions

Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

ext4: call out CRC and corruption errors with specific error codes

Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: make sure the encryption info is initialized on opendir(2)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: use per-inode tfm structure

As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page. Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.

Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: reorganize how we store keys in the inode

This is a pretty massive patch which does a number of different things:

1) The per-inode encryption information is now stored in an allocated
data structure, ext4_crypt_info, instead of directly in the node.
This reduces the size usage of an in-memory inode when it is not
using encryption.

2) We drop the ext4_fname_crypto_ctx entirely, and use the per-inode
encryption structure instead. This remove an unnecessary memory
allocation and free for the fname_crypto_ctx as well as allowing us
to reuse the ctfm in a directory for multiple lookups and file
creations.

3) We also cache the inode's policy information in the ext4_crypt_info
structure so we don't have to continually read it out of the
extended attributes.

4) We now keep the keyring key in the inode's encryption structure
instead of releasing it after we are done using it to derive the
per-inode key. This allows us to test to see if the key has been
revoked; if it has, we prevent the use of the derived key and free
it.

5) When an inode is released (or when the derived key is freed), we
will use memset_explicit() to zero out the derived key, so it's not
left hanging around in memory. This implies that when a user logs
out, it is important to first revoke the key, and then unlink it,
and then finally, to use "echo 3 > /proc/sys/vm/drop_caches" to
release any decrypted pages and dcache entries from the system
caches.

6) All this, and we also shrink the number of lines of code by around
100. :-)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: don't allocate a page when encrypting/decrypting file names

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: simplify and speed up filename encryption

Avoid using SHA-1 when calculating the user-visible filename when the
encryption key is available, and avoid decrypting lots of filenames
when searching for a directory entry in a directory block.

Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: enable filename encryption

Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4 crypto: teach ext4_htree_store_dirent() to store decrypted filenames

For encrypted directories, we need to pass in a separate parameter for
the decrypted filename, since the directory entry contains the
encrypted filename.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unused header files

Remove unused header files and header files which are included in
ext4.h.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: convert ext4_bread() to use the ERR_PTR convention

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: check inline directory before converting

Before converting an inline directory to a regular directory, check
the directory entries to make sure they're not obviously broken.
This helps us to avoid a BUG_ON if one of the dirents is trashed.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>

ext4: remove unused local variable "stored" from ext4_readdir(...)

Remove local variable "stored" from ext4_readdir(...). This variable
gets initialized but is never used inside the function.

Signed-off-by: Giedrius Rekasius <giedrius.rekasius@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs/ext4: use rbtree postorder iteration helper instead of opencoding

Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: Fix misspellings using 'codespell' tool

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

[readdir] convert ext4

and trim the living hell out bogosities in inline dir case

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: fix readdir error in the case of inline_data+dir_index

Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.

In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.

So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.

Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: fix a warning from sparse check for ext4_dir_llseek

ext4_dir_llseek is only used as a callback function, and no one calls
it directly. So make it as a static function in order to remove a
warning message from sparse check.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

new helper: file_inode(file)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: release buffer when checksum failed

Commit b0336e8d (ext4: calculate and verify checksums of directory
leaf blocks) and commit dbe89444 (ext4: Calculate and verify checksums
for htree nodes) forget to release buffer when checksum failed, at
some places.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

lseek: the "whence" argument is called "whence"

But the kernel decided to call it "origin" instead. Fix most of the
sites.

Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: let ext4_readdir handle inline data

For "." and "..", we just call filldir by ourselves
instead of iterating the real dir entry.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: refactor __ext4_check_dir_entry() to accept start and size

The __ext4_check_dir_entry() function() is used to check whether the
de is over the block boundary. Now with inline data, it could be
within the block boundary while exceeds the inode size. So check this
function to check the overflow more precisely.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: use core vfs llseek code for dir seeks

Use the new functionality in generic_file_llseek_size() to
accept a custom EOF position, and un-cut-and-paste all the
vfs llseek code from ext4.

Also fix up comments on ext4_llseek() to reflect reality.

Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4: calculate and verify checksums of directory leaf blocks

Calculate and verify the checksums for directory leaf blocks
(i.e. blocks that only contain actual directory entries). The
checksum lives in what looks to be an unused directory entry with a 0
name_len at the end of the block. This scheme is not used for
internal htree nodes because the mechanism in place there only costs
one dx_entry, whereas the "empty" directory entry would cost two
dx_entries.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: change some printk() calls to use ext4_msg() instead

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: return 32/64-bit dir name hash according to usage type

Traditionally ext2/3/4 has returned a 32-bit hash value from llseek()
to appease NFSv2, which can only handle a 32-bit cookie for seekdir()
and telldir(). However, this causes problems if there are 32-bit hash
collisions, since the NFSv2 server can get stuck resending the same
entries from the directory repeatedly.

Allow ext4 to return a full 64-bit hash (both major and minor) for
telldir to decrease the chance of hash collisions. This still needs
integration on the NFS side.

Patch-updated-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
(blame me if something is not correct)

Signed-off-by: Fan Yong <yong.fan@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: remove an unneeded NULL check in __ext4_check_dir_entry()

We dereference "bh" unconditionally a couple lines down to find
"by->b_size". This function is never called with a NULL "bh" so I have
removed the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Use ext4_error_file() to print the pathname to the corrupted inode

Where the file pointer is available, use ext4_error_file() instead of
ext4_error_inode().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: optimize ext4_check_dir_entry() with unlikely() annotations

This function gets called a lot for large directories, and the answer
is almost always "no, no, there's no problem". This means using
unlikely() is a good thing.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: improve llseek error handling for overly large seek offsets

The llseek system call should return EINVAL if passed a seek offset
which results in a write error. What this maximum offset should be
depends on whether or not the huge_file file system feature is set,
and whether or not the file is extent based or not.


If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be
written (write systemcall) is different from the maximum size which can be
sought (lseek systemcall).

For example, the following 2 cases demonstrates the differences
between the maximum size which can be written, versus the seek offset
allowed by the llseek system call:

#1: mkfs.ext3 <dev>; mount -t ext4 <dev>
#2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev>

Table. the max file size which we can write or seek
at each filesystem feature tuning and file flag setting
+============+===============================+===============================+
| \ File flag| | |
| \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL |
|case \| | |
+------------+-------------------------------+-------------------------------+
| #1 | write: 2194719883264 | write: -------------- |
| | seek: 2199023251456 | seek: -------------- |
+------------+-------------------------------+-------------------------------+
| #2 | write: 4402345721856 | write: 17592186044415 |
| | seek: 17592186044415 | seek: 17592186044415 |
+------------+-------------------------------+-------------------------------+

The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes
(= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped
maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes.
(llseek of ext4_file_operations is generic_file_llseek which uses
sb->s_maxbytes.)

Therefore we create ext4 llseek function which uses 2 maxbytes.

The new own function originates from generic_file_llseek().
If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters
inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>

ext4: Remove unnecessary casts of private_data

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Pass line numbers to ext4_error() and friends

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Cleanup ext4_check_dir_entry so __func__ is now implicit

Also start passing the line number to ext4_check_dir since we're going
to need it in upcoming patch.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Convert more i_flags references to use accessor functions

These changes are not ones which are likely to result in races, but
they should be fixed.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Use bitops to read/modify i_flags in struct ext4_inode_info

At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.

https://bugzilla.kernel.org/show_bug.cgi?id=15792

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()

EXT4_ERROR_INODE() tends to provide better error information and in a
more consistent format. Some errors were not even identifying the inode
or directory which was corrupted, which made them not very useful.

Addresses-Google-Bug: #2507977

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()

This saves a huge amount of stack space by avoiding unnecesary struct
buffer_head's from being allocated on the stack.

In addition, to make the code easier to understand, collapse and
refactor ext4_get_block(), ext4_get_block_write(),
noalloc_get_block_write(), into a single function.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: fix up rb_root initializations to use RB_ROOT

ext4 uses rb_node = NULL; to zero rb_root at few places. Using
RB_ROOT as the initializer is more portable in case the underlying
implementation of rbtrees changes in the future.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Paris <eparis@redhat.com>

ext4: make "offset" consistent in ext4_check_dir_entry()

The callers of ext4_check_dir_entry() usually pass in the "file
offset" (ext4_readdir, htree_dirblock_to_tree, search_dirblock,
ext4_dx_find_entry, empty_dir), but a few callers (add_dirent_to_buf,
ext4_delete_entry) only pass in the buffer offset.

To accomodate those last two (which would be hard to fix otherwise),
this patch changes ext4_check_dir_entry() to print the physical block
number and the relative offset as well as the passed-in offset.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: move __func__ into a macro for ext4_warning, ext4_error

Just a pet peeve of mine; we had a mishash of calls with either __func__
or "function_name" and the latter tends to get out of sync.

I think it's easier to just hide the __func__ in a macro, and it'll
be consistent from then on.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Define a new set of flags for ext4_get_blocks()

The functions ext4_get_blocks(), ext4_ext_get_blocks(), and
ext4_ind_get_blocks() used an ad-hoc set of integer variables used as
boolean flags passed in as arguments. Use a single flags parameter
and a setandard set of bitfield flags instead. This saves space on
the call stack, and it also makes the code a bit more understandable.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Rename ext4_get_blocks_wrap() to be ext4_get_blocks()

Another function rename for clarity's sake. The _wrap prefix simply
confuses people, and didn't add much people trying to follow the code
paths.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: New rec_len encoding for very large blocksizes

The rec_len field in the directory entry is 16 bits, so to encode
blocksizes larger than 64k becomes problematic. This patch allows us
to supprot block sizes up to 256k, by using the low 2 bits to extend
the range of rec_len to 2**18-1 (since valid rec_len sizes must be a
multiple of 4). We use the convention that a rec_len of 0 or 65535
means the filesystem block size, for compatibility with older kernels.

It's unlikely we'll see VM pages of up to 256k, but at some point we
might find that the Linux VM has been enhanced to support filesystem
block sizes > than the VM page size, at which point it might be useful
for some applications to allow very large filesystem block sizes.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Make printk's consistently prefixed with "EXT4-fs: "

Previously, some were "ext4: ", and some were "EXT4: "; change them to
be consistent with most ext4 printk's, which is to use "EXT4-fs: ".

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Change unsigned long to unsigned int

Convert the unsigned longs that are most responsible for bloating the
stack usage on 64-bit systems.

Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Fix duplicate entries returned from getdents() system call

Fix a regression caused by commit d0156417, "ext4: fix ext4_dx_readdir
hash collision handling", where deleting files in a large directory
(requiring more than one getdents system call), results in some
filenames being returned twice. This was caused by a failure to
update info->curr_hash and info->curr_minor_hash, so that if the
directory had gotten modified since the last getdents() system call
(as would be the case if the user is running "rm -r" or "git clean"),
a directory entry would get returned twice to the userspace.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This patch fixes the bug reported by Markus Trippelsdorf at:
http://bugzilla.kernel.org/show_bug.cgi?id=11844

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>

ext4: Avoid printk floods in the face of directory corruption

Note: some people thinks this represents a security bug, since it
might make the system go away while it is printing a large number of
console messages, especially if a serial console is involved. Hence,
it has been assigned CVE-2008-3528, but it requires that the attacker
either has physical access to your machine to insert a USB disk with a
corrupted filesystem image (at which point why not just hit the power
button), or is otherwise able to convince the system administrator to
mount an arbitrary filesystem image (at which point why not just
include a setuid shell or world-writable hard disk device file or some
such). Me, I think they're just being silly. --tytso

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: Eugene Teo <eugeneteo@kernel.sg>

ext4: Fix whitespace checkpatch warnings/errors

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Add printk priority levels to clean up checkpatch warnings

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Fix ext4_dx_readdir hash collision handling

This fixes a bug where readdir() would return a directory entry twice
if there was a hash collision in an hash tree indexed directory.

Signed-off-by: Eugene Dashevsky <eugene@ibrix.com>
Signed-off-by: Mike Snitzer <msnitzer@ibrix.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: delayed allocation ENOSPC handling

This patch does block reservation for delayed
allocation, to avoid ENOSPC later at page flush time.

Blocks(data and metadata) are reserved at da_write_begin()
time, the freeblocks counter is updated by then, and the number of
reserved blocks is store in per inode counter.

At the writepage time, the unused reserved meta blocks are returned
back. At unlink/truncate time, reserved blocks are properly released.

Updated fix from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
to fix the oldallocator block reservation accounting with delalloc, added
lock to guard the counters and also fix the reservation for meta blocks.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: improve some code in rb tree part of dir.c

* remove unnecessary code in free_rb_tree_fname

* rename free_rb_tree_fname to ext4_htree_create_dir_info
since it and ext4_htree_free_dir_info are a pair

* replace kmalloc with kzalloc in ext4_htree_free_dir_info

All these make the code more readable and simple.
PS: this patch is also suitable for ext3.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: move headers out of include/linux

Move ext4 headers out of include/linux. This is just the trivial move,
there's some more thing that could be done later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Convert ext4 to use unlocked_ioctl

I checked ext4_ioctl and it looked largely safe to not be used
without BKL. So convert it over to unlocked_ioctl.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Remove incorrect BKL comments in ext4

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Introduce ext4_lblk_t

This patch adds a new data type ext4_lblk_t to represent
the logical file blocks.

This is the preparatory patch to support large files in ext4
The follow up patch with convert the ext4_inode i_blocks to
represent the number of blocks in file system block size. This
changes makes it possible to have a block number 2**32 -1 which
will result in overflow if the block number is represented by
signed long. This patch convert all the block number to type
ext4_lblk_t which is typedef to __u32

Also remove dead code ext4_ext_walk_space

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>

ext4: Avoid rec_len overflow with 64KB block size

With 64KB blocksize, a directory entry can have size 64KB which does not fit
into 16 bits we have for entry lenght. So we store 0xffff instead and convert
value when read from / written to disk. The patch also converts some places
to use ext4_next_entry() when we are changing them anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>

ext4: remove #ifdef CONFIG_EXT4_INDEX

CONFIG_EXT4_INDEX is not an exposed config option in the kernel, and it is
unconditionally defined in ext4_fs.h. tune2fs is already able to turn off
dir indexing, so at this point it's just cluttering up the code. Remove
it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix f_version type: should be u64 instead of unsigned long

Fix f_version type: should be u64 instead of long

There is a type inconsistency between struct inode i_version and struct file
f_version.

fs.h:

struct inode
u64 i_version;

and

struct file
unsigned long f_version;

Users do:

fs/ext3/dir.c:

if (filp->f_version != inode->i_version) {

So why isn't f_version a u64 ? It becomes a problem if versions gets
higher than 2^32 and we are on an architecture where longs are 32 bits.

This patch changes the f_version type to u64, and updates the users accordingly.

It applies to 2.6.23-rc2-mm2.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Martin Bligh <mbligh@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: <linux-ext4@vger.kernel.org>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: combine file_ra_state.prev_index/prev_offset into prev_pos

Combine the file_ra_state members
unsigned long prev_index
unsigned int prev_offset
into
loff_t prev_pos

It is more consistent and better supports huge files.

Thanks to Peter for the nice proposal!

[akpm@linux-foundation.org: fix shift overflow]
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: split ondemand readahead interface into two functions

Split ondemand readahead interface into two functions. I think this makes it
a little clearer for non-readahead experts (like Rusty).

Internally they both call ondemand_readahead(), but the page argument is
changed to an obvious boolean flag.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: convert ext3/ext4 invocations

Convert ext3/ext4 dir reads to use on-demand readahead.

Readahead for dirs operates _not_ on file level, but on blockdev level. This
makes a difference when the data blocks are not continuous. And the read
routine is somehow opaque: there's no handy info about the status of current
page. So a simplified call scheme is employed: to call into readahead
whenever the current page falls out of readahead windows.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

header cleaning: don't include smp_lock.h when not used

Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ext4: change uses of f_{dentry, vfsmnt} to use f_path

Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext4
filesystem.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] handle ext4 directory corruption better

I've been using Steve Grubb's purely evil "fsfuzzer" tool, at
http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz

Basically it makes a filesystem, splats some random bits over it, then
tries to mount it and do some simple filesystem actions.

At best, the filesystem catches the corruption gracefully. At worst,
things spin out of control.

As you might guess, we found a couple places in ext4 where things spin out
of control :)

First, we had a corrupted directory that was never checked for
consistency... it was corrupt, and pointed to another bad "entry" of
length 0. The for() loop looped forever, since the length of
ext4_next_entry(de) was 0, and we kept looking at the same pointer over and
over and over and over... I modeled this check and subsequent action on
what is done for other directory types in ext4_readdir...

(adding this check adds some computational expense; I am testing a followup
patch to reduce the number of times we check and re-check these directory
entries, in all cases. Thanks for the idea, Andreas).

Next we had a root directory inode which had a corrupted size, claimed to
be > 200M on a 4M filesystem. There was only really 1 block in the
directory, but because the size was so large, readdir kept coming back for
more, spewing thousands of printk's along the way.

Per Andreas' suggestion, if we're in this read error condition and we're
trying to read an offset which is greater than i_blocks worth of bytes,
stop trying, and break out of the loop.

With these two changes fsfuzz test survives quite well on ext4.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext4 whitespace cleanups

Someone's tab key is emitting spaces. Attempt to repair some of the damage.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: add extent map support

On disk extents format:
/*
* this is extent on-disk structure
* it's used at the bottom of the tree
*/
struct ext3_extent {
__le32 ee_block; /* first logical block extent covers */
__le16 ee_len; /* number of blocks covered by extent */
__le16 ee_start_hi; /* high 16 bits of physical block */
__le32 ee_start; /* low 32 bigs of physical block */
};

Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbd

Reworked from a patch by Mingming Cao and Randy Dunlap

Signed-off-By: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbols

Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext4: initial copy of files from ext3

Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for
details.

This is a simple copy of the files in fs/ext3 to fs/ext4 and
/usr/incude/linux/ext3* to /usr/include/ex4*

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>