btrfs: add forward declarations and headers, part 2

Do a cleanup in more headers:

- add forward declarations for types referenced by pointers
- add includes when types need them

This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix typos found by codespell

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move btrfs_verify_level_key into tree-checker.c

This is more a buffer validation helper, move it into the tree-checker
files where it makes more sense.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add __btrfs_check_node helper

This helper returns a btrfs_tree_block_status for the various errors,
and then btrfs_check_node() will return -EUCLEAN if it gets anything
other than BTRFS_TREE_BLOCK_CLEAN which will be used by the kernel. In
the future btrfs-progs will use this helper instead.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: extend btrfs_leaf_check to return btrfs_tree_block_status

Instead of blanket returning -EUCLEAN for all the failures in
btrfs_check_leaf, use btrfs_tree_block_status and return the appropriate
status for each failure. Rename the helper to __btrfs_check_leaf and
then make a wrapper of btrfs_check_leaf that will return -EUCLEAN to
non-clean error codes. This will allow us to have the
__btrfs_check_leaf variant in btrfs-progs while keeping the behavior in
the kernel consistent.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add btrfs_tree_block_status definitions to tree-checker.h

We use this in btrfs-progs to determine if we can fix different types of
corruptions. We don't care about this in the kernel, however it would
be good to share this code between the kernel and btrfs-progs, so add
the status definitions so we can start converting the tree-checker code
over to using these status flags instead of blanket returning -EUCLEAN.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: simplify btrfs_check_leaf_* helpers into a single helper

We have two helpers for checking leaves, because we have an extra check
for debugging in btrfs_mark_buffer_dirty(), and at that stage we may
have item data that isn't consistent yet. However we can handle this
case internally in the helper, if BTRFS_HEADER_FLAG_WRITTEN is set we
know the buffer should be internally consistent, otherwise we need to
skip checking the item data.

Simplify this helper down a single helper and handle the item data
checking logic internally to the helper.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move struct btrfs_tree_parent_check out of disk-io.h

Move struct btrfs_tree_parent_check out of disk-io.h so that volumes.h
an various .c files don't have to include disk-io.h just for it.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use tree-checker.h for the structure ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: tree-checker: check extent buffer owner against owner rootid

Btrfs doesn't check whether the tree block respects the root owner.
This means, if a tree block referred by a parent in extent tree, but has
owner of 5, btrfs can still continue reading the tree block, as long as
it doesn't trigger other sanity checks.

Normally this is fine, but combined with the empty tree check in
check_leaf(), if we hit an empty extent tree, but the root node has
csum tree owner, we can let such extent buffer to sneak in.

Shrink the hole by:

- Do extra eb owner check at tree read time

- Make sure the root owner extent buffer exactly matches the root id.

Unfortunately we can't yet completely patch the hole, there are several
call sites can't pass all info we need:

- For reloc/log trees
Their owner is key::offset, not key::objectid.
We need the full root key to do that accurate check.

For now, we just skip the ownership check for those trees.

- For add_data_references() of relocation
That call site doesn't have any parent/ownership info, as all the
bytenrs are all from btrfs_find_all_leafs().

- For direct backref items walk
Direct backref items records the parent bytenr directly, thus unlike
indirect backref item, we don't do a full tree search.

Thus in that case, we don't have full parent owner to check.

For the later two cases, they all pass 0 as @owner_root, thus we can
skip those cases if @owner_root is 0.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: get fs_info from eb in btrfs_check_chunk_valid

We can read fs_info from extent buffer and can drop it from the
parameters.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: get fs_info from eb in btrfs_check_node

We can read fs_info from extent buffer and can drop it from the
parameters.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: get fs_info from eb in btrfs_check_leaf_relaxed

We can read fs_info from extent buffer and can drop it from the
parameters.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: get fs_info from eb in btrfs_check_leaf_full

We can read fs_info from extent buffer and can drop it from the
parameters.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: Move btrfs_check_chunk_valid() to tree-check.[ch] and export it

By function, chunk item verification is more suitable to be done inside
tree-checker.

So move btrfs_check_chunk_valid() to tree-checker.c and export it.

And since it's now moved to tree-checker, also add a better comment for
what this function is doing.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: replace GPL boilerplate by SPDX -- headers

Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.

Unify the include protection macros to match the file names.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: tree-checker: Replace root parameter with fs_info

When inspecting the error message with real corruption, the "root=%llu"
always shows "1" (root tree), instead of the correct owner.

The problem is that we are getting @root from page->mapping->host, which
points the same btree inode, so we will always get the same root.

This makes the root owner output meaningless, and harder to port
tree-checker to btrfs-progs.

So get rid of the false and meaningless @root parameter and replace it
with @fs_info.
To get the owner, we can only rely on btrfs_header_owner() now.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: tree-checker: Fix false panic for sanity test

[BUG]
If we run btrfs with CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y, it will
instantly cause kernel panic like:

------
...
assertion failed: 0, file: fs/btrfs/disk-io.c, line: 3853
...
Call Trace:
btrfs_mark_buffer_dirty+0x187/0x1f0 [btrfs]
setup_items_for_insert+0x385/0x650 [btrfs]
__btrfs_drop_extents+0x129a/0x1870 [btrfs]
...
-----

[Cause]
Btrfs will call btrfs_check_leaf() in btrfs_mark_buffer_dirty() to check
if the leaf is valid with CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y.

However quite some btrfs_mark_buffer_dirty() callers(*) don't really
initialize its item data but only initialize its item pointers, leaving
item data uninitialized.

This makes tree-checker catch uninitialized data as error, causing
such panic.

*: These callers include but not limited to
setup_items_for_insert()
btrfs_split_item()
btrfs_expand_item()

[Fix]
Add a new parameter @check_item_data to btrfs_check_leaf().
With @check_item_data set to false, item data check will be skipped and
fallback to old btrfs_check_leaf() behavior.

So we can still get early warning if we screw up item pointers, and
avoid false panic.

Cc: Filipe Manana <fdmanana@gmail.com>
Reported-by: Lakshmipathi.G <lakshmipathi.g@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: Move leaf and node validation checker to tree-checker.c

It's no doubt the comprehensive tree block checker will become larger,
so moving them into their own files is quite reasonable.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>