btrfs: constify fs_info parameter in __btrfs_panic()

The printk helpers take const fs_info if it's used just for the
identifier in the messages, __btrfs_panic() lacks that.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename errno identifiers to error

We sync the kernel files to userspace and the 'errno' symbol is defined
by standard library, which does not matter in kernel but the parameters
or local variables could clash. Rename them all.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove v0 extent handling

The v0 extent item has been deprecated for a long time, and we don't have
any report from the community either.

So it's time to remove the v0 extent specific error handling, and just
treat them as regular extent tree corruption.

This patch would remove the btrfs_print_v0_err() helper, and enhance the
involved error handling to treat them just as any extent tree
corruption. No reports regarding v0 extents have been seen since the
graceful handling was added in 2018.

This involves:

- btrfs_backref_add_tree_node()
This change is a little tricky, the new code is changed to only handle
BTRFS_TREE_BLOCK_REF_KEY and BTRFS_SHARED_BLOCK_REF_KEY.

But this is safe, as we have rejected any unknown inline refs through
btrfs_get_extent_inline_ref_type().
For keyed backrefs, we're safe to skip anything we don't know (that's
if it can pass tree-checker in the first place).

- btrfs_lookup_extent_info()
- lookup_inline_extent_backref()
- run_delayed_extent_op()
- __btrfs_free_extent()
- add_tree_block()
Regular error handling of unexpected extent tree item, and abort
transaction (if we have a trans handle).

- remove_extent_data_ref()
It's pretty much the same as the regular rejection of unknown backref
key.
But for this particular case, we can also remove a BUG_ON().

- extent_data_ref_count()
We can remove the BTRFS_EXTENT_REF_V0_KEY BUG_ON(), as it would be
rejected by the only caller.

- btrfs_print_leaf()
Remove the handling for BTRFS_EXTENT_REF_V0_KEY.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: print assertion failure report and stack trace from the same line

Assertions reports are split into two parts, the exact file and location
of the condition and then the stack trace printed from
btrfs_assertfail(). This means all the stack traces report the same line
and this is what's typically reported by various tools, making it harder
to distinguish the reports.

[403.2467] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4259
[403.2479] ------------[ cut here ]------------
[403.2484] kernel BUG at fs/btrfs/messages.c:259!
[403.2488] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[403.2493] CPU: 2 PID: 23202 Comm: umount Not tainted 6.2.0-rc4-default+ #67
[403.2499] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[403.2509] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs]
...
[403.2595] Call Trace:
[403.2598] <TASK>
[403.2601] btrfs_free_block_groups.cold+0x52/0xae [btrfs]
[403.2608] close_ctree+0x6c2/0x761 [btrfs]
[403.2613] ? __wait_for_common+0x2b8/0x360
[403.2618] ? btrfs_cleanup_one_transaction.cold+0x7a/0x7a [btrfs]
[403.2626] ? mark_held_locks+0x6b/0x90
[403.2630] ? lockdep_hardirqs_on_prepare+0x13d/0x200
[403.2636] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2642] ? trace_hardirqs_on+0x2d/0x110
[403.2646] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2652] generic_shutdown_super+0xb0/0x1c0
[403.2657] kill_anon_super+0x1e/0x40
[403.2662] btrfs_kill_super+0x25/0x30 [btrfs]
[403.2668] deactivate_locked_super+0x4c/0xc0

By making btrfs_assertfail a macro we'll get the same line number for
the BUG output:

[63.5736] assertion failed: 0, in fs/btrfs/super.c:1572
[63.5758] ------------[ cut here ]------------
[63.5782] kernel BUG at fs/btrfs/super.c:1572!
[63.5807] invalid opcode: 0000 [#2] PREEMPT SMP KASAN
[63.5831] CPU: 0 PID: 859 Comm: mount Tainted: G D 6.3.0-rc7-default+ #2062
[63.5868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[63.5905] RIP: 0010:btrfs_mount+0x24/0x30 [btrfs]
[63.5964] RSP: 0018:ffff88800e69fcd8 EFLAGS: 00010246
[63.5982] RAX: 000000000000002d RBX: ffff888008fc1400 RCX: 0000000000000000
[63.6004] RDX: 0000000000000000 RSI: ffffffffb90fd868 RDI: ffffffffbcc3ff20
[63.6026] RBP: ffffffffc081b200 R08: 0000000000000001 R09: ffff88800e69fa27
[63.6046] R10: ffffed1001cd3f44 R11: 0000000000000001 R12: ffff888005a3c370
[63.6062] R13: ffffffffc058e830 R14: 0000000000000000 R15: 00000000ffffffff
[63.6081] FS: 00007f7b3561f800(0000) GS:ffff88806c600000(0000) knlGS:0000000000000000
[63.6105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63.6120] CR2: 00007fff83726e10 CR3: 0000000002a9e000 CR4: 00000000000006b0
[63.6137] Call Trace:
[63.6143] <TASK>
[63.6148] legacy_get_tree+0x80/0xd0
[63.6158] vfs_get_tree+0x43/0x120
[63.6166] do_new_mount+0x1f3/0x3d0
[63.6176] ? do_add_mount+0x140/0x140
[63.6187] ? cap_capable+0xa4/0xe0
[63.6197] path_mount+0x223/0xc10

This comes at a cost of bloating the final btrfs.ko module due all the
inlining, as long as assertions are compiled in. This is a must for
debugging builds but this is often enabled on release builds too.

Release build:

text data bss dec hex filename
1251676 20317 16088 1288081 13a791 pre/btrfs.ko
1260612 29473 16088 1306173 13ee3d post/btrfs.ko

DELTA: +8936

CC: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add __KERNEL__ check for btrfs_no_printk

We want to override this in btrfs-progs, so wrap this in the __KERNEL__
check so we can easily sync this to btrfs-progs and have our local
version of btrfs_no_printk do the work.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: Mark btrfs_assertfail() __noreturn

Fixes a bunch of warnings including:

vmlinux.o: warning: objtool: select_reloc_root+0x314: unreachable instruction
vmlinux.o: warning: objtool: finish_inode_if_needed+0x15b1: unreachable instruction
vmlinux.o: warning: objtool: get_bio_sector_nr+0x259: unreachable instruction
vmlinux.o: warning: objtool: raid_wait_read_end_io+0xc26: unreachable instruction
vmlinux.o: warning: objtool: raid56_parity_alloc_scrub_rbio+0x37b: unreachable instruction
...

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/960bd9c0c9e3cfc409ba9c35a17644b11b832956.1681342859.git.jpoimboe@kernel.org

btrfs: mark btrfs_assertfail() __noreturn

Fixes a bunch of warnings including:

vmlinux.o: warning: objtool: select_reloc_root+0x314: unreachable instruction
vmlinux.o: warning: objtool: finish_inode_if_needed+0x15b1: unreachable instruction
vmlinux.o: warning: objtool: get_bio_sector_nr+0x259: unreachable instruction
vmlinux.o: warning: objtool: raid_wait_read_end_io+0xc26: unreachable instruction
vmlinux.o: warning: objtool: raid56_parity_alloc_scrub_rbio+0x37b: unreachable instruction
...

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302210709.IlXfgMpX-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move btrfs_abort_transaction to transaction.c

While trying to sync messages.[ch] I ended up with this dependency on
messages.h in the rest of btrfs-progs code base because it's where
btrfs_abort_transaction() was now held. We want to keep messages.[ch]
limited to the kernel code, and the btrfs_abort_transaction() code
better fits in the transaction code and not in messages.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ move the __cold attributes ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: print transaction aborted messages with an error level

Currently we print the transaction aborted message with a debug level, but
a transaction abort is an exceptional event that indicates something went
wrong and it's useful to have it printed with an error level as it helps
analysing problems in a production environment, where debug level messages
are typically not logged. For example reports from syzbot never include
the transaction aborted message, since the log level on the test machines
is above the debug level.

So change the log level from debug to error.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move the 32bit warn defines into messages.h

The code for these functions are in messages.c, move the defines and
prototypes to messages.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: push printk index code into their respective helpers

The printk index work can be pushed into the printk helpers themselves,
this allows us to further sanitize messages.h, removing the last
include in the header itself.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move the printk helpers out of ctree.h

We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>