bcachefs: Standardize helpers for printing enum strs with bounds checks

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Repair pass for scanning for btree nodes

If a btree root or interior btree node goes bad, we're going to lose a
lot of data, unless we can recover the nodes that it pointed to by
scanning.

Fortunately btree node headers are fully self describing, and
additionally the magic number is xored with the filesytem UUID, so we
can do so safely.

This implements the scanning - next patch will rework topology repair to
make use of the found nodes.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve -o norecovery; opts.recovery_pass_limit

This adds opts.recovery_pass_limit, and redoes -o norecovery to make use
of it; this fixes some issues with -o norecovery so it can be safely
used for data recovery.

Norecovery means "don't do journal replay"; it's an important data
recovery tool when we're getting stuck in journal replay.

When using it this way we need to make sure we don't free journal keys
after startup, so we continue to overlay them: thus it needs to imply
retain_recovery_info, as well as nochanges.

recovery_pass_limit is an explicit option for telling recovery to exit
after a specific recovery pass; this is a much cleaner way of
implementing -o norecovery, as well as being a useful debug feature in
its own right.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Pin btree cache in ram for random access in fsck

Various phases of fsck involve checking references from one btree to
another: this means doing a sequential scan of one btree, and then
mostly random access into the second.

This is particularly painful for checking extents <-> backpointers; we
can prefetch btree node access on the sequential scan, but not on the
random access portion, and this is particularly painful on spinning
rust, where we'd like to keep the pipeline fairly full of btree node
reads so that the elevator can reduce seeking.

This patch implements prefetching and pinning of the portion of the
btree that we'll be doing random access to. We already calculate how
much of the random access btree will fit in memory so it's a fairly
straightforward change.

This will put more pressure on system memory usage, so we introduce a
new option, fsck_memory_usage_percent, which is the percentage of total
system ram that fsck is allowed to pin.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: no_splitbrain_check option

This adds an option to disable kicking out devices when splitbrain is
detected - it seems there's some issues with splitbrain detection and
we're kicking out devices erronously.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_prt_compression_type()

bounds checking helper, since compression types are extensible

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: helpers for printing data types

We need bounds checking since new versions may introduce new data types.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an option to control btree node prefetching

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: factor out thread_with_file, thread_with_stdio

thread_with_stdio now knows how to handle input - fsck can now prompt to
fix errors.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix nochanges/read_only interaction

nochanges means "we cannot issue writes at all"; it's possible to go
into a pseudo read-write mode where we pin dirty metadata in memory,
which is used for fsck in dry run mode and doing journal replay on a
read only mount, but we do not want to allow an actual read-write mount
in nochanges mode.

But we do always want to allow early read-write, during recovery - this
patch clarifies that.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: btree write buffer now slurps keys from journal

Previosuly, the transaction commit path would have to add keys to the
btree write buffer as a separate operation, requiring additional global
synchronization.

This patch introduces a new journal entry type, which indicates that the
keys need to be copied into the btree write buffer prior to being
written out. We switch the journal entry type back to
JSET_ENTRY_btree_keys prior to write, so this is not an on disk format
change.

Flushing the btree write buffer may require pulling keys out of journal
entries yet to be written, and quiescing outstanding journal
reservations; we previously added journal->buf_lock for synchronization
with the journal write path.

We also can't put strict bounds on the number of keys in the journal
destined for the write buffer, which means we might overflow the size of
the preallocated buffer and have to reallocate - this introduces a
potentially fatal memory allocation failure. This is something we'll
have to watch for, if it becomes an issue in practice we can do
additional mitigation.

The transaction commit path no longer has to explicitly check if the
write buffer is full and wait on flushing; this is another performance
optimization. Instead, when the btree write buffer is close to full we
change the journal watermark, so that only reservations for journal
reclaim are allowed.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add ability to redirect log output

Upcoming patches are going to add two new ioctls for running fsck in the
kernel, but pretending that we're running our normal userspace fsck.

This patch adds some plumbing for redirecting our normal log messages
away from the dmesg log to a thread_with_file file descriptor - via a
struct log_output, which will be consumed by the fsck f_op's read method.

The new ioctls will allow for running fsck in the kernel against an
offline filesystem (without mounting it), and an online filesystem. For
an offline filesystem we need a way to pass in a pointer to the
log_output, which is done via a new hidden opts.h option.

For online fsck, we can set c->output directly, but only want to
redirect log messages from the thread running fsck - hence the new
c->output_filter method.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add IO error counts to bch_member

We now track IO errors per device since filesystem creation.

IO error counts can be viewed in sysfs, or with the 'bcachefs
show-super' command.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Guard against unknown compression options

Since compression options now include compression level, proper
validation is a bit more involved.

This adds bch2_compression_opt_valid(), and plumbs it around
appropriately.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_btree_id_str()

Since we can run with unknown btree IDs, we can't directly index btree
IDs into fixed size arrays.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add iops fields to bch_member

Signed-off-by: Hunter Shaffer <huntershaffer182456@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix W=12 build errors

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Compression levels

This allows including a compression level when specifying a compression
type, e.g.
compression=zstd:15

Values from 1 through 15 indicate compression levels, 0 or unspecified
indicates the default.

For LZ4, values 3-15 specify that the HC algorithm should be used.

Note that for compatibility, extents themselves only include the
compression type, not the compression level. This means that specifying
the same compression algorithm but different compression levels for the
compression and background_compression options will have no effect.

XXX: perhaps we could add a warning for this

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: fix_errors option is now a proper enum

Before, it was parsed as a bool but internally it was really an enum:
this lets us pass in all the possible values.

But we special case the option parsing: no supplied value is parsed as
FSCK_FIX_yes, to match the previous behaviour.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_opt_fn

Minor refactoring to get rid of some unneeded token pasting.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: version_upgrade is now an enum

The version_upgrade parameter is now an enum, not a bool, and it's
persistent in the superblock:
- compatible (default): upgrade to the latest compatible version
- incompatible: upgrade to latest incompatible version
- none

Currently all upgrades are incompatible upgrades, but the next release
will introduce major:minor versions.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_version_to_text()

Add a new helper for printing out metadata versions in a standard
format.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Verbose on by default when CONFIG_BCACHEFS_DEBUG=y

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add option for completely disabling nocow

This adds an option for completely disabling nocow mode, including the
locking in the data move path.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add max nr of IOs in flight to the move path

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Nocow support

This adds support for nocow mode, where we do writes in-place when
possible. Patch components:

- New boolean filesystem and inode option, nocow: note that when nocow
is enabled, data checksumming and compression are implicitly disabled

- To prevent in-place writes from racing with data moves
(data_update.c) or bucket reuse (i.e. a bucket being reused and
re-allocated while a nocow write is in flight, we have a new locking
mechanism.

Buckets can be locked for either data update or data move, using a
fixed size hash table of two_state_shared locks. We don't have any
chaining, meaning updates and moves to different buckets that hash to
the same lock will wait unnecessarily - we'll want to watch for this
becoming an issue.

- The allocator path also needs to check for in-place writes in flight
to a given bucket before giving it out: thus we add another counter
to bucket_alloc_state so we can track this.

- Fsync now may need to issue cache flushes to block devices instead of
flushing the journal. We add a device bitmask to bch_inode_info,
ei_devs_need_flush, which tracks devices that need to have flushes
issued - note that this will lead to unnecessary flushes when other
codepaths have already issued flushes, we may want to replace this with
a sequence number.

- New nocow write path: look up extents, and if they're writable write
to them - otherwise fall back to the normal COW write path.

XXX: switch to sequence numbers instead of bitmask for devs needing
journal flush

XXX: ei_quota_lock being a mutex means bch2_nocow_write_done() needs to
run in process context - see if we can improve this

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Btree write buffer

This adds a new method of doing btree updates - a straight write buffer,
implemented as a flat fixed size array.

This is only useful when we don't need to read from the btree in order
to do the update, and when reading is infrequent - perfect for the LRU
btree.

This will make LRU btree updates fast enough that we'll be able to use
it for persistently indexing buckets by fragmentation, which will be a
massive boost to copygc performance.

Changes:
- A new btree_insert_type enum, for btree_insert_entries. Specifies
btree, btree key cache, or btree write buffer.

- bch2_trans_update_buffered(): updates via the btree write buffer
don't need a btree path, so we need a new update path.

- Transaction commit path changes:
The update to the btree write buffer both mutates global, and can
fail if there isn't currently room. Therefore we do all write buffer
updates in the transaction all at once, and also if it fails we have
to revert filesystem usage counter changes.

If there isn't room we flush the write buffer in the transaction
commit error path and retry.

- A new persistent option, for specifying the number of entries in the
write buffer.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_inode_opts_get()

This improves io_opts() and makes it a non-inline function - it's big
enough that it probably shouldn't be.

Also, bch_io_opts no longer needs fields for whether options are
defined, so we can slim it down a bit.

We'd like to stop passing around the full bch_io_opts, but that'll be
tricky because of bch2_rebalance_add_key().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve bch2_inode_opts_to_opts()

It turns out the *_defined entries of bch_io_opts are only used in one
place - in the xattr get path - and there we immediately convert to a
bch_opts struct, which also has the *_defined entries.

This patch changes bch2_inode_opts_to_opts() to go directly from
bch_inode_unpacked to bch_opts, which is a minor simplification and will
also let us slim down struct bch_io_opts in another patch.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an O_DIRECT option (for userspace)

Sometimes we see IO errors due to O_DIRECT alignment issues - having an
option to use buffered IO will be helpful.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Make verbose option settable at runtime

-o verbose is very useful, and we're starting to use it more for runtime
debug statements - making it possible to enable at runtime is a no
brainer.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Make IO in flight by copygc/rebalance configurable

This adds a new option, move_bytes_in_flight, for configuring the amount
of IO in flight by copygc/rebalance - users with many devices in their
filesystem will want to increase this.

In the future we should be smarter about this, but this is an easy
improvement.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Rename group to label for remaining strings.

Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Make bch_option compatible with Rust ffi

Rust FFI lacks support for unnamed structs and unions. The space
saved in bch_option is not enough to be significant.

Signed-off-by: Brett Holman <bholman.devel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill old rebuild_replicas option

This option was useful when the replicas mechism was new and still being
debugged, but hasn't been used in ages - let's delete it.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: New discard implementation

In the old allocator code, buckets would be discarded just prior to
being used - this made sense in bcache where we were discarding buckets
just after invalidating the cached data they contain, but in a
filesystem where we typically have more free space we want to be
discarding buckets when they become empty.

This patch implements the new behaviour - it checks the need_discard
btree for buckets awaiting discards, and then clears the appropriate
bit in the alloc btree, which moves the buckets to the freespace btree.

Additionally, discards are now enabled by default.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Make minimum journal_flush_delay nonzero

We're seeing a very strange bug where journal_flush_delay sometimes gets
set to 0 in the superblock. Together with the preceding patch, this
should help us track it down.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Better superblock opt validation

This moves validation of superblock options to bch2_sb_validate(), so
they'll be checked in the write path as well.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: x-macro metadata version enum

Now we've got strings for metadata versions - this changes
bch2_sb_to_text() and our mount log message to use it.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Convert bch2_sb_to_text to master option list

Options no longer have to be manually added to bch2_sb_to_text() - it
now uses the master list of options in opts.h. Also, improve some of the
formatting by converting it to tabstops.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts.read_journal_only

Add an option that tells recovery to only read the journal, to be used
by the list_journal command.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Only allocate buckets_nouse when requested

It's only needed by the migrate tool - this patch adds an option to
enable allocating it.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: bch2_journal_entry_to_text()

This adds a _to_text() pretty printer for journal entries - including
every subtype - which will shortly be used by the 'bcachefs
list_journal' subcommand.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: BCH_JSET_ENTRY_log

Add a journal entry type for logging messages, and add an option to use
it to log the transaction name - this makes for a very handy debugging
tool, as with it we can use the 'bcachefs list_journal' command to see
not only what updates were done, but what was doing them.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Kill non-lru cache replacement policies

Prep work for persistent LRUs and getting rid of the in memory bucket
array.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Turn encoded_extent_max into a regular option

It'll now be handled at format time and in sysfs like other options - it
still can only be set at format time, though.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Option improvements

This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).

Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Add more time_stats

This adds more latency/event measurements and breaks some apart into
more events. Journal writes are broken apart into flush writes and
noflush writes, btree compactions are broken out from btree splits,
btree mergers are added, as well as btree_interior_updates - foreground
and total.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Specify filesystem options

We've got three types of options now - filesystem, device and inode, and
a given option may belong to more than one of those types.

This patch changes the options to specify explicitly when they're a
filesystem option - in the future we'll probably be adding more device
options.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Convert journal sysfs params to regular options

This converts journal_write_delay, journal_flush_disabled, and
journal_reclaim_delay to normal filesystems options, and also adds them
to the superblock.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Fix quota support for snapshots

Quota support was disabled when snapshots were released, because of some
tricky interactions with snpashots. We're sidestepping that for now -
we're simply disabling quota accounting on snapshot subvolumes.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: More enum strings

This patch converts more enums in the on disk format to our standard
x-macro-with-strings deal - to enable better pretty-printing.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Improve transaction restart handling in fsck code

The fsck code has been handling transaction restarts locally, to avoid
calling fsck_err() multiple times (and asking the user/logging the error
multiple times) on transaction restart.

However, with our improving assertions about iterator validity, this
isn't working anymore - the code wasn't entirely correct, in ways that
are fine for now but are going to matter once we start wanting online
fsck.

This code converts much of the fsck code to handle transaction restarts
in a more rigorously correct way - moving restart handling up to the top
level of check_dirent, check_xattr and others - at the cost of logging
errors multiple times on transaction restart.

Fixing the issues with logging errors multiple times is probably going
to require memoizing calls to fsck_err() - we'll leave that for future
improvements.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Disable quota support

Existing quota support breaks badly with snapshots. We're not deleting
the code because some of it will be needed when we reimplement quotas
along the lines of btrfs subvolume quotas.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Enabled shard_inode_numbers by default

We'd like performance increasing options to be on by default.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Add an option for btree node mem ptr optimization

bch2_btree_node_ptr_v2 has a field for stashing a pointer to the in
memory btree node; this is safe because we clear this field when reading
in nodes from disk and we never free in memory btree nodes - but, we
have bug reports that indicate something might be faulty with this
optimization, so let's add an option for it.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Add an option for whether inodes use the key cache

We probably don't ever want to flip this off in production, but it may
be useful for certain kinds of testing.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: bch2_d_types[]

Add readable names for d_type, and use it in dirent_to_text().

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Add an option to control sharding new inode numbers

We're seeing a bug where inode creates end up spinning in
bch2_inode_create - disabling sharding will simplify what we're testing.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

bcachefs: Kill reflink option

An option was added to control whether reflink support was on or off
because for a long time, reflink + inline data extent support was
missing - but that's since been fixed, so we can drop the option now.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Use x-macros for more enums

This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Rename BTREE_ID enums for consistency with other enums

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Use x-macros for compat feature bits

This is to generate strings for them, so that we can print them out.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Redo checks for sufficient devices

When the replicas mechanism was added, for tracking data by which drives
it's replicated on, the check for whether we have sufficient devices was
never updated to make use of it. This patch finally does that.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an option for metadata_target

Also, make journal writes obey foreground_target and metadata_target.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Indirect inline data extents

When inline data extents were added, reflink was forgotten about - we
need indirect inline data extents for reflink + inline data to work
correctly.

This patch adds them, and a new feature bit that's flipped when they're
used.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix for passing target= opts as mount opts

Some options can't be parsed until the filesystem initialized;
previously, passing these options to mount or remount would cause mount
to fail.

This changes the mount path so that we parse the options passed in
twice, and just ignore any options that can't be parsed the first time.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix maximum btree node size

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an option for rebuilding the replicas section

There is a bug where we cnan end up clearing the data_has field in the
superblock members section, which causes us to skip reading the journal
and thus journal replay fails. This option tells the recovery path to
not trust those fields.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an internal option for reading entire journal

To be used the debug tool that dumps the contents of the journal.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an option to disable reflink support

Reflink might be buggy, so we're adding an option so users can help
bisect what's going on.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an option for keeping journal entries after startup

This will be used by the userspace debug tools.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Convert some enums to x-macros

Helps for preventing things from getting out of sync.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Put inline data behind a mount option for now

Inline data extents + reflink is still broken

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add an option for fsck error ratelimiting

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't use sha256 for siphash str hash key

With the refactoring that's coming to add fuse support, we want
bch2_hash_info_init() to be cheaper so we don't have to rely on anything
cached besides the inode in the btree.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Kill deferred btree updates

Will be replaced by cached btree iterators

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Switch reconstruct_alloc to a mount option

Right now this is the only way of repairing bucket gens in the future

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't run fsck by default at mount time

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: some improvements to startup messages and options

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Make deferred inode updates a mount option

Journal reclaim may still need performance tuning

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Lots of option handling improvements

Add helptext to option definitions - so we can unify the option
handling with the format command

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: merge BCH_INODE_FIELDS_INHERIT/BCH_INODE_OPTS

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: use x-macros more consistently

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Make bkey types globally unique

this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.

Also improve the on disk format versioning stuff.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Erasure coding

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Check for unsupported features

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: revamp to_text methods

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Rename nofsck opt to fsck

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: BCH_SB_RESERVE_BYTES

Add an option, gc_reserve_bytes, to set the copygc reserve as a size
instead of a percent

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Initial commit

Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.

Website: https://bcachefs.org

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>