fbdev: Select I/O-memory framebuffer ops for SBus

Framebuffer I/O on the Sparc Sbus requires read/write helpers for
I/O memory. Select FB_IOMEM_FOPS accordingly.

Reported-by: Nick Bowler <nbowler@draconx.ca>
Closes: https://lore.kernel.org/lkml/5bc21364-41da-a339-676e-5bb0f4faebfb@draconx.ca/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8813e86f6d82 ("fbdev: Remove default file-I/O implementations")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322083005.24269-1-tzimmermann@suse.de

fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH

Since commit f402f7a02af6956d ("staging: board: Remove Armadillo-800-EVA
board staging code"), there are no more users of the legacy SuperH
Mobile LCDC framebuffer driver on Renesas ARM platforms. All former
users on these platforms have been converted to the SH-Mobile DRM
driver, using DT.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Helge Deller <deller@gmx.de>

video/nomodeset: Select nomodeset= parameter with CONFIG_VIDEO

Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option CONFIG_VIDEO_NOMODESET. Simplifies the Kconfig rules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-4-tzimmermann@suse.de

fbdev/intelfb: Remove driver

From looking at the PCI IDs, every device supported by intelfb is
also supported by i915. Anyone still using intelfb should please
move on to i915, which does everything intelfb does but better.

Removing intelfb is motivated by the driver's excessive use of the
global screen_info state. The state belongs to architecture and
firmware code; device drivers should not attempt to access it. But
fixing intelfb would require a significant change in the driver's
probing logic. As intelfb has been obsolete for nearly 2 decades,
it is probably not worth the effort. Let's just remove it. Also
remove the related documentation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: amba-clcd: Delete the old CLCD driver

We have managed to ascertain that all users of the old FBDEV
code that are out of tree are now gone.

The new DRM driver can be found in drivers/gpu/drm/pl111/.

The remaining out of tree user was the ARM FVP emulation
platform, running Android. Thanks to changes in Android
versions 13 and 14, Android can now use the DRM driver when
being emulated under FVP. Some final patches are being put
in place to make it fully featured.

This is essentially a revert of the partial revert in
commit 112c35237c72 ("Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"")

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: Remove support for Carillo Ranch driver

As far as anybody can tell, this product never shipped. If it did,
it shipped in 2007 and nobody has access to one any more. Remove the
fbdev driver and the backlight driver.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: Rename FB_SYS_FOPS token to FB_SYSMEM_FOPS

Rename the token to harmonize naming among various helpers. For
example, I/O-memory helpers use FB_IOMEM_FOPS.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-28-tzimmermann@suse.de

fbdev/cyber2000fb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-25-tzimmermann@suse.de

fbdev/wm8505fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able address space. This explictily
sets the read/write, draw and mmap callbacks to the correct default
implementation. Also select the necessary helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requireing the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

Set the callbacks via macros. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-24-tzimmermann@suse.de

fbdev/vt8500lcdfb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-23-tzimmermann@suse.de

fbdev/clps711x-fb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.

The driver previously selected drawing ops for system memory
although it operates on I/O memory. Fixed now.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-22-tzimmermann@suse.de

fbdev/ps3fb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in virtual address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-20-tzimmermann@suse.de

fbdev/au1200fb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-18-tzimmermann@suse.de

fbdev/udlfb: Select correct helpers

The driver uses deferred I/O. Select the correct helpers via
FB_SYSMEM_HELPERS_DEFERRED in the Kconfig file.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-16-tzimmermann@suse.de

fbdev/smscufx: Select correct helpers

The driver uses deferred I/O. Select the correct helpers via
FB_SYSMEM_HELPERS_DEFERRED in the Kconfig file.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-15-tzimmermann@suse.de

fbdev/sh_mobile_lcdcfb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in DMA-able virtual address space. Set the
read/write, draw and mmap callbacks to the correct implementation
and avoid implicit defaults. Also select the necessary helpers in
Kconfig.

The driver uses a mixture of DMA helpers and deferred I/O. That
probably needs fixing by a driver maintainer.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-14-tzimmermann@suse.de

fbdev/arcfb: Use generator macros for deferred I/O

Implement the driver's fops with the generator macros for deferred
I/O. Only requires per-driver code for the on-scren scanout buffer.
The generated helpers implement reading, writing and drawing on top
of that. Also update the selected Kconfig tokens accordingly.

Actual support for deferred I/O is missing from the driver. So
writing to memory-mapped pages does not automatically update the
scanout buffer.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jaya Kumar <jayalk@intworks.biz>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-7-tzimmermann@suse.de

fbdev/vfb: Initialize fb_ops with fbdev macros

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in virtual address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default I/O-memory-based implementation to be invoked; hence
requiring the I/O helpers to be built in any case. Setting all
callbacks in all drivers explicitly will allow to make the I/O
helpers optional. This benefits systems that do not use these
functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-5-tzimmermann@suse.de

vga16fb: drop powerpc support

I noticed that commit 0db5b61e0dc07 ("fbdev/vga16fb: Create
EGA/VGA devices in sysfb code") broke vga16fb on non-x86 platforms,
because the sysfb code never creates a vga-framebuffer device when
screen_info.orig_video_isVGA is set to '1' instead of VIDEO_TYPE_VGAC.

However, it turns out that the only architecture that has allowed
building vga16fb in the past 20 years is powerpc, and this only worked
on two 32-bit platforms and never on 64-bit powerpc. The last machine
that actually used this was removed in linux-3.10, so this is all dead
code and can be removed.

The big-endian support in vga16fb.c could also be removed, but I'd just
leave this in place.

Fixes: 933ee7119fb14 ("powerpc: remove PReP platform")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-8-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev/vt8623fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-47-tzimmermann@suse.de

fbdev/viafb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-46-tzimmermann@suse.de

fbdev/vga16fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-45-tzimmermann@suse.de

fbdev/vermilionfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-44-tzimmermann@suse.de

fbdev/tridentfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-43-tzimmermann@suse.de

fbdev/tgafb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-42-tzimmermann@suse.de

fbdev/tdfxfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-41-tzimmermann@suse.de

fbdev/sunxvr500: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-40-tzimmermann@suse.de

fbdev/stifb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-39-tzimmermann@suse.de

fbdev/sm712fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-38-tzimmermann@suse.de

fbdev/sm501fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize each instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-37-tzimmermann@suse.de

fbdev/sisfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-36-tzimmermann@suse.de

fbdev/savagefb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-35-tzimmermann@suse.de

fbdev/sa1100fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-34-tzimmermann@suse.de

fbdev/s3fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-33-tzimmermann@suse.de

fbdev/s1d13xxxfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

To simplify the conversion, provide a dedicated fb_ops instance
for accelerated devices. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-32-tzimmermann@suse.de

fbdev/rivafb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-31-tzimmermann@suse.de

fbdev/radeon: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-30-tzimmermann@suse.de

fbdev/pvr2fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-29-tzimmermann@suse.de

fbdev/pm3fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-28-tzimmermann@suse.de

fbdev/pm2fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-27-tzimmermann@suse.de

fbdev/nvidiafb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-25-tzimmermann@suse.de

fbdev/neofb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-24-tzimmermann@suse.de

fbdev/matroxfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize each instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-23-tzimmermann@suse.de

fbdev/intelfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maik Broemme <mbroemme@libmpq.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-22-tzimmermann@suse.de

fbdev/imsttfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-21-tzimmermann@suse.de

fbdev/i810fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-20-tzimmermann@suse.de

fbdev/hpfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-19-tzimmermann@suse.de

fbdev/hitfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-18-tzimmermann@suse.de

fbdev/hgafb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-17-tzimmermann@suse.de

fbdev/gbefb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-16-tzimmermann@suse.de

fbdev/ep93xx-fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-15-tzimmermann@suse.de

fbdev/dnfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-14-tzimmermann@suse.de

fbdev/cyber2000fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-13-tzimmermann@suse.de

fbdev/controlfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-12-tzimmermann@suse.de

fbdev/cobalt-lcd: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-11-tzimmermann@suse.de

fbdev/cirrusfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-10-tzimmermann@suse.de

fbdev/au1100fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-9-tzimmermann@suse.de

fbdev/atyfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-8-tzimmermann@suse.de

fbdev/atafb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-7-tzimmermann@suse.de

fbdev/arkfb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-6-tzimmermann@suse.de

fbdev/amifb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-5-tzimmermann@suse.de

fbdev/amba-clcd: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-4-tzimmermann@suse.de

fbdev/68328fb: Initialize fb_ops to fbdev I/O-memory helpers

Initialize the instance of struct fb_ops with fbdev initializer
macros for framebuffers in I/O address space. Set the read/write,
draw and mmap callbacks to the correct implementation and avoid
implicit defaults. Also select the necessary I/O helpers in Kconfig.

Fbdev drivers sometimes rely on the callbacks being NULL for a
default implementation to be invoked; hence requiring the I/O
helpers to be built in any case. Setting all callbacks in all
drivers explicitly will allow to make the I/O helpers optional.
This benefits systems that do not use these functions.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-3-tzimmermann@suse.de

arch: Remove Itanium (IA-64) architecture

The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.

None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.

While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.

There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.

So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.

[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/

Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

fbdev/hyperv_fb: Use fb_ops helpers for deferred I/O

Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_IOMEM_OPS(). Initialize struct fb_ops to
the generated functions with fbdev initializer macros.

The hyperv_fb driver is incomplete in its handling of deferred I/O
and damage framebuffers. Write operations do no trigger damage handling.
Fixing this is beyond the scope of this patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-5-tzimmermann@suse.de

fbdev/tcx: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-12-tzimmermann@suse.de

fbdev/p9100: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-11-tzimmermann@suse.de

fbdev/leo: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-10-tzimmermann@suse.de

fbdev/cg3: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-7-tzimmermann@suse.de

fbdev/cg14: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-6-tzimmermann@suse.de

fbdev/bw2: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-5-tzimmermann@suse.de

fbdev/sbus: Add initializer macros and Kconfig tokens for SBUS support

Add macros to initialize struct fb_ops for drivers that support
framebuffers on Sparc's SBUS. Also add a Kconfig token that selects
the necessary helpers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-4-tzimmermann@suse.de

fbdev/sh7760fb: Depend on FB=y

Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.

All errors (new ones prefixed by >>):

sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de

fbdev: mx3fb: Remove the driver

The mx3fb driver does not support devicetree and i.MX has been converted
to a DT-only platform since kernel 5.10.

As there is no user for this driver anymore, just remove it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev/xilinxfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Michal Simek <michal.simek@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-47-tzimmermann@suse.de

fbdev/vesafb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-46-tzimmermann@suse.de

fbdev/valkyriefb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-45-tzimmermann@suse.de

fbdev/uvesafb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Michal Januszewski <spock@gentoo.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-44-tzimmermann@suse.de

fbdev/sunxvr2500: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-43-tzimmermann@suse.de

fbdev/sunxvr1000: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-42-tzimmermann@suse.de

fbdev/sstfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-41-tzimmermann@suse.de

fbdev/simplefb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-40-tzimmermann@suse.de

fbdev/sh7760fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-39-tzimmermann@suse.de

fbdev/s3cfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Jingoo Han <jingoohan1@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-38-tzimmermann@suse.de

fbdev/q40fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-37-tzimmermann@suse.de

fbdev/pxafb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-36-tzimmermann@suse.de

fbdev/pxa168fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-35-tzimmermann@suse.de

fbdev/pmagb-b-fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
* fix driver name in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-34-tzimmermann@suse.de

fbdev/pmag-ba-fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-33-tzimmermann@suse.de

fbdev/pmag-aa-fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-32-tzimmermann@suse.de

fbdev/platinumfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-31-tzimmermann@suse.de

fbdev/offb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-29-tzimmermann@suse.de

fbdev/ocfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-28-tzimmermann@suse.de

fbdev/mx3fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-27-tzimmermann@suse.de

fbdev/mb862xxfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-25-tzimmermann@suse.de

fbdev/maxinefb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-24-tzimmermann@suse.de

fbdev/macfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-23-tzimmermann@suse.de

fbdev/kyro: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-22-tzimmermann@suse.de

fbdev/imxfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-21-tzimmermann@suse.de

fbdev/i740fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-20-tzimmermann@suse.de

fbdev/gxt4500: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-19-tzimmermann@suse.de

fbdev/grvga: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-18-tzimmermann@suse.de

fbdev/goldfishfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-17-tzimmermann@suse.de

fbdev/g364fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-13-tzimmermann@suse.de

fbdev/fsl-diu-fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Timur Tabi <timur@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-12-tzimmermann@suse.de

fbdev/fm2fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-11-tzimmermann@suse.de

fbdev/efifb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Peter Jones <pjones@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-10-tzimmermann@suse.de

fbdev/da8xx-fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-9-tzimmermann@suse.de

fbdev/chipsfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-8-tzimmermann@suse.de

fbdev/carminefb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-7-tzimmermann@suse.de

fbdev/aty128fb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-6-tzimmermann@suse.de

fbdev/atmel_lcdfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-5-tzimmermann@suse.de

fbdev/asiliantfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-4-tzimmermann@suse.de

fbdev/acornfb: Use fbdev I/O helpers

Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.

The macro and token set the currently selected values, so there is
no functional change.

v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-3-tzimmermann@suse.de

fbdev: Use _SYSMEM_ infix for system-memory helpers

Change the infix for fbdev's system-memory helpers from _SYS_ to
_SYSMEM_. The helpers perform operations within system memory, but
not on the state of the operating system itself. Naming should make
this clear. Adapt all users. No functional changes.

Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-3-tzimmermann@suse.de

fbdev: Split frame buffer support in FB and FB_CORE symbols

Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
drivers are needed (e.g: only to have support for framebuffer consoles).

The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
and so it can only be enabled if that dependency is enabled as well.

That means fbdev drivers have to be explicitly disabled if users want to
enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.

This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
allowing CONFIG_FB to be disabled (and automatically disabling all the
fbdev drivers).

Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
layer so these two objects can be compiled out when CONFIG_FB is disabled.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-4-javierm@redhat.com

fbdev: Move core fbdev symbols to a separate Kconfig file

The drivers/video/fbdev/Kconfig defines both symbols for fbdev drivers and
core fbdev symbols, that can be enabled independently of the fbdev drivers.

Split the Kconfig in two, one that only has the symbols for fbdev drivers
and another one that contains the fbdev core symbols.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-3-javierm@redhat.com

fbdev/xen-fbfront: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from XEN_FBDEV_FRONTEND in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-10-tzimmermann@suse.de

fbdev/ssd1307fb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_SSD1307 in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-8-tzimmermann@suse.de

fbdev/metronomefb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_METRONOME in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-6-tzimmermann@suse.de

fbdev/hecubafb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_HECUBA.

Deferred I/O helpers were previously selected by n411, which builds
upon hecubafb. Remove these select statements in favor of the new one.
N411 does not implement any framebuffer I/O by itself.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-4-tzimmermann@suse.de

fbdev/broadsheetfb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_BROADSHEET in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-2-tzimmermann@suse.de

fbdev: Make support for userspace interfaces configurable

Add Kconfig option CONFIG_FB_DEVICE and make the virtual fbdev
device optional. If the new option has not been selected, fbdev
does not create files in devfs, sysfs or procfs.

Most modern Linux systems run a DRM-based graphics stack that uses
the kernel's framebuffer console, but has otherwise deprecated fbdev
support. Yet fbdev userspace interfaces are still present.

The option makes it possible to use the fbdev subsystem as console
implementation without support for userspace. This closes potential
entry points to manipulate kernel or I/O memory via framebuffers. It
also prevents the execution of driver code via ioctl or sysfs, both
of which might allow malicious software to exploit bugs in the fbdev
code.

A small number of fbdev drivers require struct fbinfo.dev to be
initialized, usually for the support of sysfs interface. Make these
drivers depend on FB_DEVICE. They can later be fixed if necessary.

v3:
* effect -> affect in Kconfig help (Daniel)
v2:
* set FB_DEVICE default to y (Geert)
* comment on {get,put}_device() (Sam)
* Kconfig fixes (Sam)
* add TODO item about FB_DEVICE dependencies (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-39-tzimmermann@suse.de

fbdev: Add Kconfig options to select different fb_ops helpers

Many fbdev drivers use the same set of fb_ops helpers. Add Kconfig
options to select them at once. This will help with making DRM's
fbdev emulation code more modular, but can also be used to simplify
fbdev's driver configs.

v3:
* fix select statement (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-2-tzimmermann@suse.de

fbdev: fbmem: mark get_fb_unmapped_area() static

There is a global function with this name on sparc, but no
global declaration:

drivers/video/fbdev/core/fbmem.c:1469:15: error: no previous prototype for 'get_fb_unmapped_area'

Make the generic definition static to avoid this warning. On
sparc, this is never seen.

Edit by Helge:
Update Kconfig text as suggested by Geert Uytterhoeven.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

video: Move HP PARISC STI core code to shared location

STI core files have been located in console and fbdev code. Move
the source code and header to the directories for video helpers.
Also update the config and build rules such that the code depends
on the config symbol CONFIG_STI_CORE, which STI console and STI
framebuffer select automatically.

Cleans up the console makefile and prepares PARISC to implement
fb_is_primary_device() within the arch/ directory. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-12-tzimmermann@suse.de

fbdev: Handle video= parameter in video/cmdline.c

Handle the command-line parameter video= in video/cmdline.c. Implement
the fbdev helper fb_get_options() on top. Will allows to handle the
kernel parameter in DRM without fbdev dependencies.

Note that __video_get_options() has the meaning of its return value
inverted compared to fb_get_options(). The new helper returns true if
the adapter has been enabled, and false otherwise.

There is the ofonly parameter, which disables output for non-OF-based
framebuffers. It is only for offb and looks like a workaround. The actual
purpose it not clear to me. Use 'video=off' or 'nomodeset' instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-9-tzimmermann@suse.de

fbdev: remove w100fb driver

The w100fb was used on various PXA based pocketpc machines,
all of which are now removed, so remove this dirver sd well.

Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

fbdev: remove tmiofb driver

With the TMIO MFD support removed, the framebuffer driver can be
removed as well.

Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

fbdev: remove s3c2410 framebuffer

The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

fbdev: make offb driver tristate

Make the offb (Open Firmware frame buffer) driver tristate,
i.e., so that it can be built as a loadable module.

However, it still depends on the setting of DRM_OFDRM
so that both of these drivers cannot be builtin at the same time
nor can one be builtin and the other one a loadable module.

Build-tested successfully with all combination of DRM_OFDRM and FB_OF.

This fixes a build issue that Michal reported when FB_OF=y and
DRM_OFDRM=m:

powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x58): undefined reference to `cfb_fillrect'
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x60): undefined reference to `cfb_copyarea'
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x68): undefined reference to `cfb_imageblit'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michal Suchánek <msuchanek@suse.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: uvesafb: don't build on UML

The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: ssd1307fb: Drop optional dependency

Only a single out of three devices need a PWM, so from driver it's
optional. Moreover it's a single driver in the entire kernel that
currently selects PWM. Unfortunately this selection is a root cause
of the circular dependencies when we want to enable optional PWM
for some other drivers that select GPIOLIB.

Fixes: a2ed00da5047 ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: Add support for the nomodeset kernel parameter

Support the kernel's nomodeset parameter for all PCI-based fbdev
drivers that use aperture helpers to remove other, hardware-agnostic
graphics drivers.

The parameter is a simple way of using the firmware-provided scanout
buffer if the hardware's native driver is broken. The same effect
could be achieved with per-driver options, but the importance of the
graphics output for many users makes a single, unified approach
worthwhile.

With nomodeset specified, the fbdev driver module will not load. This
unifies behavior with similar DRM drivers. In DRM helpers, modules
first check the nomodeset parameter before registering the PCI
driver. As fbdev has no such module helpers, we have to modify each
driver individually.

The name 'nomodeset' is slightly misleading, but has been chosen for
historical reasons. Several drivers implemented it before it became a
general option for DRM. So keeping the existing name was preferred over
introducing a new one.

v2:
* print a warning if a driver does not init (Helge)
* wrap video_firmware_drivers_only() in helper

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de

drm/ofdrm: Add ofdrm for Open Firmware framebuffers

Open Firmware provides basic display output via the 'display' node.
DT platform code already provides a device that represents the node's
framebuffer. Add a DRM driver for the device. The display mode and
color format is pre-initialized by the system's firmware. Runtime
modesetting via DRM is not possible. The display is useful during
early boot stages or as error fallback.

Similar functionality is already provided by fbdev's offb driver,
which is insufficient for modern userspace. The old driver includes
support for BootX device tree, which can be found on old 32-bit
PowerPC Macintosh systems. If these are still in use, the
functionality can be added to ofdrm or implemented in a new
driver. As with simpledrm, the fbdev driver cannot be selected if
ofdrm is already enabled.

Two notable points about the driver:

* Reading the framebuffer aperture from the device tree is not
reliable on all systems. Ofdrm takes the heuristics and a comment
from offb to pick the correct range.

* No resource management may be tied to the underlying PCI device.
Otherwise the handover to the native driver will fail with a resource
conflict. PCI management is therefore done as part of the platform
device's cleanup.

The driver has been tested on qemu's ppc64le emulation. The device
hand-over has been tested with bochs.

v5:
* use drm_atomic_helper_check_crtc_primary_plane()
v4:
* set preferred depth to the correct value
* set bpp value for console emulation
* output scanout-buffer parameters with drm_dbg()
v3:
* reintegrate FWFB helpers into ofdrm
* use damage iterator
* sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access()
* fix various atomic_check helpers
* remove CRTC atomic_{enable,disable} (Javier)
* compute stride with drm_format_info_min_pitch() (Daniel)
v2:
* removed simple-pipe helpers
* built driver on top of FWFB helpers
* merged all init code into single function
* make PCI support optional (Michal)
* support COMPILE_TEST (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

convert
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de

drm: Implement DRM aperture helpers under video/

Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.

Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.

The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.

The original DRM interface is kept in place for use by DRM drivers.

v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de

Revert "fbdev: vesafb: Allow to be built if COMPILE_TEST is enabled"

This reverts commit fa0e256450f27a7d85f65c63f05e6897954a1d53. The kernel
test robot reported that attempting to build the vesafb driver fails on
some architectures, because these don't define a `struct screen_info`.

This leads to linking errors, for example on parisc with allyesconfig:

hppa-linux-ld: drivers/video/fbdev/vesafb.o: in function `vesafb_probe':
>> (.text+0x738): undefined reference to `screen_info'
>> hppa-linux-ld: (.text+0x73c): undefined reference to `screen_info'
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
>> (.init.text+0x28): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x30): undefined reference to `screen_info'
hppa-linux-ld: (.init.text+0x78): undefined reference to `screen_info'

The goal of commit fa0e256450f2 ("fbdev: vesafb: Allow to be built if
COMPILE_TEST is enabled") was to have more build coverage for the driver
but it wrongly assumed that all architectures would define a screen_info.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085450.1341880-1-javierm@redhat.com

fbdev: vesafb: Allow to be built if COMPILE_TEST is enabled

The driver has runtime but no build time dependency with X86, so it can
be built for testing purposes if the COMPILE_TEST option is enabled.

This is useful to have more build coverage and make sure that the driver
is not affected by changes that could cause build regressions.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505120419.314136-1-javierm@redhat.com

sysfb: Enable boot time VESA graphic mode selection

Since switch to simplefb/simpledrm VESA graphic mode selection with vga=
kernel parameter is no longer available with legacy BIOS.

The x86 realmode boot code enables the VESA graphic modes when option
FB_BOOT_VESA_SUPPORT is enabled.

This option is selected by vesafb but not simplefb/simpledrm.

To enable use of VESA modes with simplefb in legacy BIOS boot mode drop
dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select
the option from sysfb rather than the drivers that depend on it.

The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86
platform, move it from fbdev to x86 Kconfig.

Fixes: e3263ab389a7 ("x86: provide platform-devices for boot-framebuffers")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/948c39940a4e99f5b43bdbcbe537faae71a43e1d.1645822213.git.msuchanek@suse.de

sysfb: Make config option dependencies explicit

efifb and vesafb requires sysfb implicitly but this is not stated in
Kconfig. Add the dependency.

With that all drivers that require sysfb depend on it so it can default
to disabled.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a0fa41e9186653e4c41ad0a28259e5cdc71b1f66.1645822213.git.msuchanek@suse.de

video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text

pvr2fb.c should be under drivers/video/fbdev/
instead of drivers/video/

Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: simplefb: fix Kconfig dependencies

Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m
are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency
does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This
can however result in a build failure when cfb_fillrect() etc are then
also in loadable modules:

x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect'
x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea'
x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit'

To work around this, change FB_SIMPLE to be a 'tristate' symbol,
which still allows both to be =m together, but not one of them to
be =y if the other one is =m. If a distro kernel picks this
configuration, it can be determined by local policy which of
the two modules gets loaded. The 'of_chosen' export is needed
as this is the first loadable module referencing it.

Alternatively, the Kconfig dependency could be changed to
'depends on DRM_SIMPLEDRM=n', which would forbid the configuration
with both drivers.

Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Acked-by: Rob Herring <robh@kernel.org> # for drivers/of/
Link: https://lore.kernel.org/all/20210721151839.2484245-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Borislav Petkov <bp@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928145243.1098064-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

tgafb: clarify dependencies

The TGA boards were based on the DECchip 21030 PCI graphics accelerator
used mainly for alpha, and existed in a TURBOchannel (TC) version for
the DECstation (MIPS) workstations.

However, the config option for the TGA code is a bit confused, and says

depends on FB && (ALPHA || TC)

because people didn't really want to enable the option for random PCI
environments, so the "ALPHA" stands in for that case (while the TC case
is then the MIPS DECstation case).

So that config dependency is kind of a mixture of architecture and bus
choices. But it's incorrect, in that there were non-PCI-based alpha
hardware, and then the driver just causes warnings:

drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function]
1532 | static void tgafb_unregister(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function]
1387 | static int tgafb_register(struct device *dev)
| ^~~~~~~~~~~~~~

so let's make the config option dependencies a bit more explict:

depends on FB
depends on PCI || TC
depends on ALPHA || TC

where that first "FB" is the software configuration dependency, the
second "PCI || TC" is the hardware bus dependency, while that final
"ALPHA || TC" dependency is the "don't bother asking except for these
situations.

We could make that third case have "COMPILE_TEST" as an option, and mark
the register/unregister functions as __maybe_unused, but I'm not sure
it's really worth it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video: ssd1307fb: Drop OF dependency

After the commit 72915994e028 ("video: ssd1307fb: Make use of device
properties") driver does not depend on OF, drop unneeded dependency.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210409164140.17337-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Add simpledrm driver

The simpledrm driver is a DRM driver for simple-framebuffer framebuffers
as provided by the kernel's boot code. This driver enables basic
graphical output on many different graphics devices that are provided
by the platform (e.g., EFI, VESA, embedded framebuffers).

With the kernel's simple-framebuffer infrastructure, the kernel receives
a pre-configured framebuffer from the system (i.e., firmware, boot
loader). It creates a platform device to which simpledrm attaches.
The system's framebuffer consists of a memory range, size and format.
Based on these values, simpledrm creates a DRM devices. No actual
modesetting is possible.

A firmware framebuffer might also be specified via device-tree files. If
no device platform data is given, try the DT device node.

Make sure required hardware clocks and regulators are enabled while the
firmware framebuffer is in use. The basic code has been taken from the
simplefb driver and adapted to DRM. Clocks are released automatically
via devres helpers.

The drivers displays a console on simpledrm's framebuffer. The default
framebuffer format is being used.

v4:
* disable simplefb if simpledrm has been selected (Maxime)
v3:
* add disable function that clears screen to black (Daniel)
* set shadow buffering only for fbdev emulation
* set platform-driver data during device creation
v2:
* rename driver to simpledrm
* add dri-devel to MAINTAINERS entry
* put native format first in primary-plane format list (Daniel)
* inline simplekms_device_cleanup() (Daniel)
* use helpers for shadow-buffered planes
* fix whitespace errors
* add Device Tree match table
* clean-up parser wrappers
* use strscpy()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de

fbdev: aty: SPARC64 requires FB_ATY_CT

It looks like SPARC64 requires FB_ATY_CT to build without errors,
so have FB_ATY select FB_ATY_CT if both SPARC64 and PCI are enabled
instead of using "default y if SPARC64 && PCI", which is not strong
enough to prevent build errors.

As it currently is, FB_ATY_CT can be disabled, resulting in build
errors:

ERROR: modpost: "aty_postdividers" [drivers/video/fbdev/aty/atyfb.ko] undefined!
ERROR: modpost: "aty_ld_pll_ct" [drivers/video/fbdev/aty/atyfb.ko] undefined!

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: f7018c213502 ("video: move fbdev to drivers/video/fbdev")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127031752.10371-1-rdunlap@infradead.org

Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"

Also partially revert the follow-up change "drm: pl111: Absorb the
external register header".

This reverts the parts of commits
7e4e589db76a3cf4c1f534eb5a09cc6422766b93 and
0fb8125635e8eb5483fb095f98dcf0651206a7b8 that touch paths outside
of drivers/gpu/drm/pl111.

The fbdev driver is used by Android's FVP configuration. Using the
DRM driver together with DRM's fbdev emulation results in a failure
to boot Android. The root cause is that Android's generic fbdev
userspace driver relies on the ability to set the pixel format via
FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation.

There have been other less critical behavioral differences identified
between the fbdev driver and the DRM driver with fbdev emulation. The
DRM driver exposes different values for the panel's width, height and
refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall
with yres_virtual greater than the maximum supported value instead
of letting the syscall succeed and setting yres_virtual based on yres.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929195344.2219796-1-pcc@google.com

fbdev: remove mbx framebuffer driver

The only in-tree user for mbx driver for Intel 2700G graphics chip was
cm-x270 platform. Since this platform was removed by the commit
9d3239147d6d ("ARM: pxa: remove Compulab pxa2xx boards") there is no
point to keep the obsolete framebuffer driver.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830115524.431278-1-rppt@kernel.org

video: fbdev: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de

video: fbdev: remove fb-puv3 driver

The unicore32 port is removed from the kernel.
There is no point to keep stale fbdev driver for this architecture.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

video: fbdev: amba-clcd: Retire elder CLCD driver

All the functionality in this driver has been reimplemented
in the new DRM driver in drivers/gpu/drm/pl111/* and all
the boards using it have been migrated to use the DRM driver
with all configuration coming from the device tree.

I started the work to migrate the CLCD driver to DRM in
april 2017 and it took a little more than 3 years to do this
properly without leaving any platforms behind.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-2-linus.walleij@linaro.org

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

powerpc: Remove Xilinx PPC405/PPC440 support

The latest Xilinx design tools called ISE and EDK has been released in
October 2013. New tool doesn't support any PPC405/PPC440 new designs.
These platforms are no longer supported and tested.

PowerPC 405/440 port is orphan from 2013 by
commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and
commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership")
that's why it is time to remove the support fot these platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu

video: fbdev: controlfb: add COMPILE_TEST support

Add COMPILE_TEST support to controlfb driver for better compile
testing coverage.

While at it:
- convert driver to use eieio() and dcbf() helpers instead of
open-coding them
- add invalid_vram_cache() helper to avoid code duplication

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134508.25120-3-b.zolnierkie@samsung.com

video: fbdev: wm8505fb: add COMPILE_TEST support

Add COMPILE_TEST support to wm8505fb driver for better compile
testing coverage.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/900c16b3-9306-7d17-f467-0f98bc95416a@samsung.com

video: fbdev: w100fb: add COMPILE_TEST support

Add COMPILE_TEST support to w100fb driver for better compile
testing coverage.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a929db5e-d373-7b09-ae2b-efec227f7e85@samsung.com

video: fbdev: arcfb: add COMPILE_TEST support

Add COMPILE_TEST support to arcfb driver for better compile
testing coverage.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/acf2cc2e-614d-f0fb-ce40-cee62bfcde4c@samsung.com

video: fbdev: sh_mobile_lcdcfb: add COMPILE_TEST support

Add COMPILE_TEST support to sh_mobile_lcdcfb driver for better compile
testing coverage.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/d98fea18-b72e-6d0f-33ac-1421738bd12b@samsung.com

video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.

On Hyper-V, Generation 1 VMs can directly use VM's physical memory for
their framebuffers. This can improve the efficiency of framebuffer and
overall performence for VM. The physical memory assigned to framebuffer
must be contiguous. We use CMA allocator to get contiguouse physicial
memory when the framebuffer size is greater than 4MB. For size under
4MB, we use alloc_pages to achieve this.

To enable framebuffer memory allocation from CMA, supply a kernel
parameter to give enough space to CMA allocator at boot time. For
example:
cma=130m
This gives 130MB memory to CAM allocator that can be allocated to
framebuffer. If this fails, we fall back to the old way of using
mmio for framebuffer.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Wei Hu <weh@microsoft.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver

Without deferred IO support, hyperv_fb driver informs the host to refresh
the entire guest frame buffer at fixed rate, e.g. at 20Hz, no matter there
is screen update or not. This patch supports deferred IO for screens in
graphics mode and also enables the frame buffer on-demand refresh. The
highest refresh rate is still set at 20Hz.

Currently Hyper-V only takes a physical address from guest as the starting
address of frame buffer. This implies the guest must allocate contiguous
physical memory for frame buffer. In addition, Hyper-V Gen 2 VMs only
accept address from MMIO region as frame buffer address. Due to these
limitations on Hyper-V host, we keep a shadow copy of frame buffer
in the guest. This means one more copy of the dirty rectangle inside
guest when doing the on-demand refresh. This can be optimized in the
future with help from host. For now the host performance gain from deferred
IO outweighs the shadow copy impact in the guest.

Signed-off-by: Wei Hu <weh@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: remove w90x900/nuc900 platform drivers

The ARM w90x900 platform is getting removed, so this driver is obsolete.

Link: https://lore.kernel.org/r/20190809202749.742267-10-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

video/fbdev: Drop JZ4740 driver

The JZ4740 fbdev driver has been replaced with the ingenic-drm driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>

video: fbdev: s3c-fb: add COMPILE_TEST support

Add COMPILE_TEST support to s3c-fb driver for better compile
testing coverage.

Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

docs: kbuild: convert docs to ReST and rename to *.rst

The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.

Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.

The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: fb: convert docs to ReST and rename to *.rst

The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Also, removed the Maintained by, as requested by Geert.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

video: fbdev: pvr2fb: add COMPILE_TEST support

Add COMPILE_TEST support to pvr2fb driver for better compile
testing coverage.

While at it:

- mark pvr2fb_interrupt() and pvr2fb_common_init() with
__maybe_unused tag (to silence build warnings when
!SH_DREAMCAST)

- convert mmio_base in struct pvr2fb_par to 'void __iomem *'
from 'unsigned long' (needed to silence build warnings on
ARM).

- split pvr2_get_param() on pvr2_get_param_name() and
pvr2_get_param_val() (needed to silence build warnings on
x86).

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: da8xx-fb: add COMPILE_TEST support

Add COMPILE_TEST support to da8xx-fb driver for better compile
testing coverage.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: gbefb: add COMPILE_TEST support

Add COMPILE_TEST support to gbefb driver for better compile
testing coverage.

While at it convert bogus udelay() calls to mdelay() (needed to
build driver on ARM) and remove dead x86 specific code.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: pxa168fb: add COMPILE_TEST support

Add COMPILE_TEST support to pxa168fb driver for better compile
testing coverage.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: imxfb: add COMPILE_TEST support

Add COMPILE_TEST support to imxfb driver for better compile
testing coverage.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: atmel_lcdfb: add COMPILE_TEST support

Add COMPILE_TEST support to atmel_lcdfb driver for better compile
testing coverage.

While at it fix improper use of UL (to silence build warnings on
x86_64).

Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: mxsfb: Remove driver

There is a DRM version of the mxsfb driver for quite some time
at drivers/gpu/drm/mxsfb/, so there is no need to keep maintaining
the fbdev version any longer.

Remove the fbdev mxsfb driver in favour of the DRM version.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: amba-clcd: Decomission Versatile and Nomadik

These board families are now handled in the DRM subsystem
where we can have reusable panel drivers and some other
stuff. The PL111 there is now the driver used in the
defconfig for Versatile and Nomadik so no need to keep
this code around.

There are a few minor machines in arch/arm/ such as
mach-netx still using the old driver, so we need to keep
the core fbdev driver around for some time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol

We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE
and BACKLIGHT_LCD_DEVICE) that do the same job.
The patch removes useless BACKLIGHT_LCD_SUPPORT option
and converts LCD_CLASS_DEVICE into a menu.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers: video: fbdev: Kconfig: pedantic cleanups

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
[b.zolnierkie: add missing patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: atmel_lcdfb: drop AVR and platform_data support

Make the driver OF only as since AVR32 has been removed from the kernel,
there are only OF enabled platform using it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

fbdev: mxsfb: implement FB_PRE_INIT_FB option

The FB_PRE_INIT_FB option keeps the kernel from reinitializing the display
and prevents flickering during the transition from a bootloader splash
screen to the kernel logo screen.

Make this option available for the mxsfb driver.

Signed-off-by: Melchior Franz <melchior.franz@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 && CONFIG_PPC_PMAC && CONFIG_NVRAM

This patch addresses inconsistencies in Mac framebuffer drivers and their
use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM.

The defined(CONFIG_NVRAM) condition is replaced with the weaker
IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi.

Macintosh framebuffer drivers use default settings for color mode and
video mode that are found in NVRAM. On PCI Macs, MacOS stores display
settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs,
there is no NR partition and MacOS stores display mode settings in PRAM**.

Early-model Macs are the ones most likely to benefit from these settings,
since they are more likely to have a fixed-frequency monitor connected to
the built-in framebuffer device. Moreover, a single NV_CMODE value and
a single NV_VMODE value provide for only one display.

The NV_CMODE and NV_VMODE constants are apparently offsets into the NR
partition for Old World machines. This also suggests that these defaults
are not useful on later models. The NR partition seems to be optional on
New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present.

It is safe to say that NVRAM support in PowerMac fbdev drivers is only
applicable to CONFIG_PPC32 so make this condition explicit. This means
matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available
there.

For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure,
since PPC64 does not implement nvram_read_byte(). Also add a missing
machine_is(powermac) check. Change the inconsistent dependency on
CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC.

For valkyriefb, to improve clarity and consistency with the other PowerMac
fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a
bogus comment regarding PRAM.

* See GetPreferredConfiguration and SavePreferredConfiguration in
"Designing PCI Cards and Drivers for Power Macintosh Computers".

** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers
for the Macintosh Family".

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: Remove depends on HAS_DMA in case of platform dependency

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

fbdev: make FB_BACKLIGHT a tristate

BACKLIGHT_CLASS_DEVICE is already tristate, but a dependency
FB_BACKLIGHT prevents it from being built as a module. There
doesn't seem to be any particularly good reason for this, so
switch FB_BACKLIGHT over to tristate.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <j.w.r.degoede@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:

config FOO
bool

config FOO
bool
default n

With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: remove dead old CLPS711x LCD support driver

Since commit c86f51737f8d ("ARM: clps711x: Switch to MULTIPLATFORM")
ARCH_CLPS711X depends on ARCH_MULTIPLATFORM to be enabled so the old
CLPS711x LCD support driver (enabled by the FB_CLPS711X_OLD config
option) can't be selected any longer. Remove all FB_CLPS711XX_OLD
code as it has been dead for over 2 years now. Please note that the
new CLPS711x LCD support driver (enabled by the FB_CLPS711X config
option) is still available in the kernel tree.

Reviewed-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

fbdev: fix broken menu dependencies

The framebuffer options and devices menu is unintentionally split
or broken because some items in it do not depend on FB (including
several under omap and mmp).
Fix this by moving FB_CMDLINE, FB_NOTIFY, and FB_CLPS711X_OLD to
just before the FB Kconfig symbol definition and by moving the
omap, omap2, and mmp menus to last, following FB_SM712.

Also, the FB_VIA dependencies are duplicated by both being inside
an "if FB_VIA/endif" block and "depends on FB_VIA", so drop the
"depends on FB_VIA" lines since they are redundant.

Fixes: ea6763c104c9 ("video/fbdev: Always built-in video= cmdline parsing")
Fixes: 5ec9653806ba ("fbdev: Make fb-notify a no-op if CONFIG_FB=n")
Fixes: ef74d46a4ef3 ("video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: add the dependency of broadsheetfb in Kconfig

broadsheetfb is a platform driver and it should not be used on x86.
It should be used only by single ARM PXA board so add the dependency
in Kconfig.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: via: allow COMPILE_TEST build

This patch allows viafb driver to be build on !X86 archs
using COMPILE_TEST config option.

Since via-camera driver (VIDEO_VIA_CAMERA) depends on viafb
it also needs a little fixup.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: remove unused sh_mobile_meram driver

Since commit a521422ea4ae ("ARM: shmobile: mackerel: Remove Legacy C
board code") MERAM functionality is unused. Remove it.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support

Since commit a521422ea4ae ("ARM: shmobile: mackerel: Remove Legacy C
board code") MERAM functionality is unused. Remove it.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: remove unused auo_k190xfb drivers

auo_k1900fb and auo_k1901fb drivers have been introduced six
years ago by following commits:

commit 2c8304d3125b ("video: auo_k190x: add code shared by controller drivers")
commit 96b1d500e028 ("video: auo_k190x: add driver for AUO-K1900 variant")
commit 53027cdf2a67 ("video: auo_k190x: add driver for AUO-K1901 variant")

They never had any in-kernel user so just remove them (since
they are platform drivers they need corresponding platform
devices to be registered by kernel and it has never happened).

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency

Since commit a521422ea4ae6128 ("ARM: shmobile: mackerel: Remove Legacy C
board code"), the only remaining platforms using this driver are SuperH
SH-Mobile SoCs (sh7723). As both SUPERH and ARCH_SHMOBILE are set for
these platforms, the SUPERH dependency can be dropped.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: s3c-fb: remove dead platform code for Exynos and S5PV210 platforms

Exynos5, Exynos4 and S5PV210 platforms have been converted to
use Device Tree and Exynos DRM driver long time ago. Remove
dead platform code for these platforms and update Kconfig
s3c-fb entry accordingly.

Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

fbdev: remove blackfin drivers

The blackfin architecture is getting removed, this removes the
associated fbdev drivers as well.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

video: fbdev: kconfig: Add help text to FB_I810_I2C

The FB_I810_I2C symbol previously had a blank help text, which was
removed in e9829ac4e5fd ("video: fbdev: kconfig: Remove blank help
text").

Give it a proper help text, derived from commit 74f6ae84b23 ("[PATCH]
i810fb: Add > i2c/DDC support").

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Hans de Goede <j.w.r.degoede@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: kconfig: Remove blank help text

Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

fb: intelfb: fix Kconfig symbol info in help text

Fix Kconfig symbol typo; it should be FB_INTEL.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirk

On some hardware the LCD panel is not mounted upright in the casing,
but rotated by 90 degrees. In this case we want the console to
automatically be rotated to compensate.

The drm subsys has a quirk table for this, use the
drm_get_panel_orientation_quirk function to get the panel orientation
and set info->fbcon_rotate_hint based on this, so that the fbcon console
on top of efifb gets automatically rotated to compensate for the panel
orientation.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-7-hdegoede@redhat.com

video: fbdev: remove dead igafb driver

igafb driver hasn't compiled since at least kernel v2.6.34 as
commit 6016a363f6b5 ("of: unify phandle name in struct device_node")
missed updating igafb.c to use dp->phandle instead of dp->node.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

video: fbdev: Enable Xilinx FB for ZynqMP

Enable this driver for Xilinx ZynqMP.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

fbdev: sti: don't select CONFIG_VT

While working on another build error, I ran into several variations of
this dependency loop:

subsection "Kconfig recursive dependency limitations"
drivers/input/Kconfig:8: symbol INPUT is selected by VT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/tty/Kconfig:12: symbol VT is selected by FB_STI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:677: symbol FB_STI depends on FB
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:137: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on OF
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/of/Kconfig:4: symbol OF is selected by X86_INTEL_CE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:523: symbol X86_INTEL_CE depends on X86_IO_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:1011: symbol X86_IO_APIC depends on X86_LOCAL_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:1005: symbol X86_LOCAL_APIC depends on X86_UP_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:980: symbol X86_UP_APIC depends on PCI_MSI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/pci/Kconfig:11: symbol PCI_MSI is selected by AMD_IOMMU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:106: symbol AMD_IOMMU depends on IOMMU_SUPPORT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:5: symbol IOMMU_SUPPORT is selected by DRM_ETNAVIV
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/acpi/Kconfig:183: symbol ACPI_VIDEO is selected by INPUT

This doesn't currently show up as I fixed the 'THERMAL' part of it,
but I noticed that the FB_STI dependency should not be there but
was introduced by slightly incorrect bug-fix patch that tried to
fix a link error.

Instead of selecting 'VT' to make us enter the drivers/video/console
directory at compile-time, it's sufficient to build the
drivers/video/console/sticore.c file by adding its directory
to when CONFIG_FB_STI is enabled. Alternatively, we could move the
sticore code to another directory that is always built when we
have at STI_CONSOLE or FB_STI enabled.

Fixes: 17085a934592 ("parisc: stifb: should depend on STI_CONSOLE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

fbmem: add a default get_fb_unmapped_area function

Allow generic frame-buffer to provide a default
get_fb_unmapped_area function if specific devices need it.

Usually this function is defined in architecture directories but
define it here may limit code duplication especially for all ARM
platforms without MMU.

version 5:
- set get_unmapped_area field if FB_PROVIDE_GET_FB_UNMAPPED_AREA is
defined

version 4:
- introdude a configuration flag to be independent of architecture

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483521177-21794-2-git-send-email-benjamin.gaignard@linaro.org

FBDEV: cobalt_lcdfb: Drop SEAD3 support

The SEAD3 board no longer uses the cobalt_lcdfb driver, so remove the
SEAD3-specific code from it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-mips@linux-mips.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14060/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

video: fbdev: exynos: Remove old non-working MIPI driver

The old non-DRM Exynos MIPI driver does not support DeviceTree and
requires board files. Our platforms do not provide such so the driver
is not usable since a long time ago. All features provided by the
driver (and associated s6e8ax0 panel driver) are already supported by
newer DRM version so the old code can be removed.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: ARM CLCD: add special panel hook for Versatiles

This adds a special panel init hook for the ARM reference designs
Integrator (IM-PD1), Versatile and RealView, so we can configure
a DPI panel from device tree and have it working without
boardfiles for these machines.

Basically this is the same code as from the board files, just
moved over to look up the syscon DT node and manipulate the
special CLCD register from their regmap.

Tested on RealView PB11MPcore.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: ARM CLCD: backlight support for OF

If the device is probed from device tree, we can support
backlight. This is used with some systems such as the
ST Microelectronics Nomadik.

We have to add HAS_IOMEM to the dependencies of CLCD since
the backlight class device will now be selected, and if it
gets selected on an arch that does not have IOMEM,
compilation will fail.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: sh_mipi_dsi: remove driver

Remove the sh_mipi_dsi driver as it appears to be unused since
c0bb9b302769 ("ARCH: ARM: shmobile: Remove ag5evm board support").

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

efifb: Enable the efi-framebuffer platform driver for ARM and arm64

Allows the efifb driver to be built for ARM and arm64. This simply involves
updating the Kconfig dependency expression, and supplying dummy versions of
efifb_setup_from_dmi().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-25-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>

xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"

The Xen framebuffer driver selects the xen keyboard driver, so the latter
will be built-in if XEN_FBDEV_FRONTEND=y. However, when CONFIG_INPUT
is a loadable module, this configuration cannot work. On mainline kernels,
the symbol will be enabled but not used, while in combination with
a patch I have to detect such useless configurations, we get the
expected link failure:

drivers/input/built-in.o: In function `xenkbd_remove':
xen-kbdfront.c:(.text+0x2f0): undefined reference to `input_unregister_device'
xen-kbdfront.c:(.text+0x30e): undefined reference to `input_unregister_device'

This removes the extra "select", as it just causes more trouble than
it helps. In theory, some defconfig file might break if it has
XEN_FBDEV_FRONTEND in it but not INPUT_XEN_KBDDEV_FRONTEND. The Kconfig
fragment we ship in the kernel (kernel/configs/xen.config) however
already enables both, and anyone using an old .config file would
keep having both enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Fixes: 36c1132e34bd ("xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND")
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: fbdev: pmag-aa-fb: Enable building as a module

With the current TURBOchannel API support is automagical.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: sh_mobile_lcdc: Use ARCH_RENESAS

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: fbdev: pxafb: initial devicetree conversion

This patch brings a first support of pxa framebuffer devices to a
devicetree pxa platform, as was before platform data.

There are restrictions with this port, the biggest one being the lack of
support of smart panels. Moreover the conversion doesn't provide a way
to declare multiple framebuffer configurations with different bits per
pixel, only the LCD hardware bus width is used.

The patch was tested on both pxa25x, pxa27x and pxa3xx platform (namely
lubbock, mainstone and zylonite).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: Make fb-notify a no-op if CONFIG_FB=n

There's no point in having support for framebuffer notifications
is CONFIG_FB is disabled. This commit adds the necessary stubs
for code to link properly when CONFIG_FB=n and moves fb-notify.o
to be built only when CONFIG_FB=y.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: sis: enforce selection of at least one backend

The sis framebuffer driver complains with a compile-time warning
if neither the FB_SIS_300 nor FB_SIS_315 symbols are selected:

drivers/video/fbdev/sis/sis_main.c:61:2: warning: #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is se

This is reasonable because it doesn't work in that case, but it's
also annoying for randconfig builds and is one of the most common
warnings I'm seeing on ARM now.

This changes the Kconfig logic to prevent the silly configuration,
by always selecting the FB_SIS_300 variant if the other one is
not set.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: Remove unused SH-Mobile HDMI driver

As of commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code
for R-Mobile A1"), the SH-Mobile HDMI driver is no longer used.
In theory it could still be used on R-Mobile A1 SoCs, but that requires
adding DT support to the driver, which is not planned.

Remove the driver, it can be resurrected from git history when needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

gxt4500: enable on non-PPC architectures

These chips can be present at least on x86 too - Fire GL2 AGP has GXT6000P but
this driver is currently limited to PPC.
Enable it for all architectures and add chip configuration for little-endian.

Tested on x86 with Fire GL2 AGP.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

tridentfb: Add DDC support

Add DDC support for Trident cards.

Tested on TGUI9440, TGUI9680, 3DImage 9750, Blade3D 9880 and Blade XP.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: select versatile helpers for the integrator

Commit 11c32d7b6274cb0f554943d65bd4a126c4a86dcd
"video: move Versatile CLCD helpers" missed the fact
that the Integrator/CP is also using the helper, and
as a result the platform got only stubs and no graphics.
Add this as a default selection to Kconfig so we have
graphics again.

Fixes: 11c32d7b6274 (video: move Versatile CLCD helpers)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

staging: sm7xxfb: merge sm712fb with fbdev

Now since all cleanups are done and the code is ready to be merged lets
move it out of staging into fbdev location.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

msm: msm_fb: Remove dead code

This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: ssd1307fb: add backlight controls for setting the contrast

The backlight class is used to create userspace handles for
setting the OLED contrast.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: kconfig: replace PPC_OF with PPC

The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

fbdev: radeon: replace PPC_OF with PPC

The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

fb: via: turn gpiolib and i2c selects into dependencies

Device driver should not directly select subsystems. In this case
we get build warnings like

warning: (ARCH_REQUIRE_GPIOLIB && PINCTRL_AT91 && PINCTRL_NOMADIK && MFD_TC6393XB && FB_VIA) selects GPIOLIB which has unmet direct dependencies (ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB)

which we can avoid using the normal 'depends on' statement.

Also, this patch makes it possible for DRM drivers to have a dependency
on GPIOLIB without getting circular Kconfig dependencies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: Drop superfluous "select VT_HW_CONSOLE_BINDING"

commit 765d5b9c2b72f5b99722cdfcf4bf8f88c556cf92 ("fbdev: fbcon: select
VT_HW_CONSOLE_BINDING") made FRAMEBUFFER_CONSOLE always select
VT_HW_CONSOLE_BINDING, but forgot to remove

select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE

from the individual drivers' sections that already did this before.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

ARM: at91/Kconfig: remove useless fbdev Kconfig options

Remove Kconfig options used nowhere.
The removal of CONFIG_ARCH_AT91SAM9261 option allowed to spot this oddness.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

fbdev: mxsfb: Add support for mx6sl and mx6sx

mx6sl and mx6sx share the same LCD controller as mx23 and mx28.

Add support for it.

The basic difference is the number of clocks that are required:

- mx23/mx28: only one clock
- mx6sl: two clocks
- mx6sx: three clocks

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT

Commit 7edaa761ee81b ("video: mx3fb: Add backlight control support")
changed the mx3fb driver so it always selects the BACKLIGHT_CLASS_DEVICE
symbol, but that is hidden behind BACKLIGHT_LCD_SUPPORT in Kconfig, so
we get a Kconfig warning for multi_v5_defconfig, which doesn't have that:

Warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 &&
DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY
&& FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI &&
EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE
which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)

This makes sure we always enable both symbols together for mx3fb, like
we do for the other drivers that can't be built without backlight
support. Note that a better solution would be to ensure the driver can
work with or without backlight support.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video/fbdev: Always built-in video= cmdline parsing

In drm/i915 we want to get at the video= cmdline modes even when we
don't have fbdev support enabled, so that users can always override
the kernel's initial mode selection.

But that gives us a direct depency upon the parsing code in the fbdev
subsystem. Since it's so little code just extract these 2 functions
and always build them in.

Whiel at it fix the checkpatch fail in this code.

v2: Also move fb_mode_option. Spotted by the kbuild.

v3: Review from Geert:
- Keep the old copyright notice from fb_mem.c, although I have no
idea what exactly applies.
- Only compile this when needed.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

--

I prefer if we can merge this through drm-next since we'll use it
there in follow-up patches.
-Daniel

video: ARM CLCD: Fix DT-related build problems

This patch fixes the following error when !CONFIG_OF:

drivers/video/fbdev/amba-clcd.c:800:54: warning: ‘struct amba_dev’ declared inside parameter list [enabled by default]
static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev)
^
and adds a missing Kconfig select causing this
when CONFIG_OF && !CONFIG_FB_MODE_HELPERS:

drivers/video/fbdev/amba-clcd.c:567: undefined reference to `fb_videomode_from_videomode'

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: ARM CLCD: Add DT support

This patch adds basic DT bindings for the PL11x CLCD cells
and make their fbdev driver use them.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: clcd-versatile: Depend on ARM

The Versatile CLCD helpers call dma_alloc_writecombine() which is only
available on ARM and AVR32, meaning they won't build on other platforms
including arm64. Unfortunately the current Kconfig enables the symbol
by default if ARCH_VEXPRESS is defined which means that it is enabled on
arm64 when building for the ARM reference platforms and models for ARMv8
since they have many hardware similarities with their pre-ARMv8 systems.

Since all the systems that need the helpers are ARM systems fix this by
adding a dependency on ARM.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

video: fix up versatile CLCD helper move

commit 11c32d7b6274cb0f ("video: move Versatile CLCD helpers")
moved files out of the plat-versatile directory but in the process
got a few of the dependencies wrong:

- If CONFIG_FB is not set, the file no longer gets built, resulting
in a link error
- If CONFIG_FB or CONFIG_FB_ARMCLCD are disabled, we also get a
Kconfig warning for incorrect dependencies due to the symbol
being 'select'ed from the platform Kconfig.
- When the file is not built, we also get a link error for missing
symbols.

This patch should fix all three, by removing the 'select' statements,
changing the Kconfig description of the symbol to be enabled in
exactly the right configurations, and adding inline stub functions
for the case when the framebuffer driver is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

video: fbdev: s3c-fb: remove s5pc100 related fimd and fb codes

This patch removes fimd and fb codes for s5pc100 SoC.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

video: fbdev: s3c-fb: remove s5p64x0 related fimd codes

This patch removes fimd codes for s5p6440 and s5p6450 SoCs.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

video: clps711x: Fix driver build for CONFIG_FB=m

This patch fixes building CLPS711X FB driver if the framebuffer
core is used as a module.

LD init/built-in.o
drivers/built-in.o: In function `clps711x_fb_remove':
:(.text+0x44a8): undefined reference to `unregister_framebuffer'
drivers/built-in.o: In function `clps711x_fb_probe':
:(.text+0x44cc): undefined reference to `fb_get_options'
:(.text+0x45d8): undefined reference to `fb_alloc_cmap'
:(.text+0x45e4): undefined reference to `register_framebuffer'
make: *** [vmlinux] Error 1

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: move Versatile CLCD helpers

This moves the Versatile-specific helper code and panel database
down into the drivers/video folder next to the CLCD driver
itself, preserving the config symbol but also moving the header
to platform data.

This is necessary to rid the Integrator of this final <plat/*>
inclusion dependency and get us one less user of the
plat-versatile folder.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver

This adds support for the framebuffer available in the Cirrus
Logic CLPS711X CPUs.
FB features:
- 1-2-4 bits per pixel.
- Programmable panel size to a maximum of 1024x256 at 4 bps.
- Relocatible Frame Buffer (SRAM or SDRAM).
- Programmable refresh rates.
- 16 gray scale values.
This new driver is designed to usage with devicetree only.
The driver have been tested with custom board equipped
Cirrus Logic EP7312.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: mx3fb: Add backlight control support

This patch add backlight control support to allow dimming the backlight
using the internal PWM. Currently the brightness is set fixed to a
maximum of 255.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: Kconfig: Add a dependency to the Goldfish framebuffer driver

All other Goldfish drivers depend on GOLDFISH, I see no reason why the
framebuffer driver would be an exception.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video/nuc900: allow modular build

The frame buffer core may be a loadable module, and in this
case, the nuc900 driver cannot be built-in. Turning it into
a tristate option lets Kconfig work out the dependency and
avoid broken builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: atmel needs FB_BACKLIGHT

The atmel frame buffer driver doesn't build if FB_BACKLIGHT
is disabled, so select it here as we do for lots of other
drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: clarify I2C dependencies

We can only use I2C support in frame buffer drivers if
Either I2C is built-in, or both I2C and the driver itself
are loadable modules.

Fix this dependency for MB862XX and CyberPro frame buffers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: sh_mobile_lcdcfb depends on meram

The sh_mobile_lcdcfb driver calls interfaces provided
by the corresponding "meram" helper. This fails if meram
is a module but lcdcfb is built-in.

To work around it, this uses special Kconfig magic to
only allow lcdcfb to be built if
a) both are modules,
b) meram is built-in, or
c) meram is disabled and the helpers stubbed out

Changing meram from 'y' to 'm' now forces clcd to
be a module as well, which seems to be the desired
behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

fbdev: Fix tmiofb driver dependencies

The tmiofb driver should not depend on MFD_CORE but on MFD_TMIO.
Without the tmio_core driver, tmiofb has no platform device to bind
to and is thus useless.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

video: move fbdev to drivers/video/fbdev

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>