virtio/vsock: send credit update during setting SO_RCVLOWAT

Send credit update message when SO_RCVLOWAT is updated and it is bigger
than number of bytes in rx queue. It is needed, because 'poll()' will
wait until number of bytes in rx queue will be not smaller than
O_RCVLOWAT, so kick sender to send more data. Otherwise mutual hungup
for tx/rx is possible: sender waits for free space and receiver is
waiting data in 'poll()'.

Rename 'set_rcvlowat' callback to 'notify_set_rcvlowat' and set
'sk->sk_rcvlowat' only in one place (i.e. 'vsock_set_rcvlowat'), so the
transport doesn't need to do it.

Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: support MSG_ZEROCOPY for transport

Add 'msgzerocopy_allow()' callback for vhost transport.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/virtio/vhost: read data from non-linear skb

This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vhost_sock: convert to vhost_vq_work_queue

Convert from vhost_work_queue to vhost_vq_work_queue, so we can drop
vhost_work_queue.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vsock: support sockmap

This patch adds sockmap support for vsock sockets. It is intended to be
usable by all transports, but only the virtio and loopback transports
are implemented.

SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported.

Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: remove unused paramete

"enabled" is defined in vhost_init_device_iotlb,
but it is never used. Let's remove it.

Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Message-Id: <20230110024445.303-1-liming.wu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>

virtio/vsock: replace virtio_vsock_pkt with sk_buff

This commit changes virtio/vsock to use sk_buff instead of
virtio_vsock_pkt. Beyond better conforming to other net code, using
sk_buff allows vsock to use sk_buff-dependent features in the future
(such as sockmap) and improves throughput.

This patch introduces the following performance changes:

Tool: Uperf
Env: Phys Host + L1 Guest
Payload: 64k
Threads: 16
Test Runs: 10
Type: SOCK_STREAM
Before: commit b7bfaa761d760 ("Linux 6.2-rc3")

Before
------
g2h: 16.77Gb/s
h2g: 10.56Gb/s

After
-----
g2h: 21.04Gb/s
h2g: 10.76Gb/s

Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: Fix error handling in vhost_vsock_init()

A problem about modprobe vhost_vsock failed is triggered with the
following log given:

modprobe: ERROR: could not insert 'vhost_vsock': Device or resource busy

The reason is that vhost_vsock_init() returns misc_register() directly
without checking its return value, if misc_register() failed, it returns
without calling vsock_core_unregister() on vhost_transport, resulting the
vhost_vsock can never be installed later.
A simple call graph is shown as below:

vhost_vsock_init()
vsock_core_register() # register vhost_transport
misc_register()
device_create_with_groups()
device_create_groups_vargs()
dev = kzalloc(...) # OOM happened
# return without unregister vhost_transport

Fix by calling vsock_core_unregister() when misc_register() returns error.

Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20221108101705.45981-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

use less confusing names for iov_iter direction initializers

READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vhost/vsock: Use kvmalloc/kvfree for larger packets.

When copying a large file over sftp over vsock, data size is usually 32kB,
and kmalloc seems to fail to try to allocate 32 32kB regions.

vhost-5837: page allocation failure: order:4, mode:0x24040c0
Call Trace:
[<ffffffffb6a0df64>] dump_stack+0x97/0xdb
[<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138
[<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8
[<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d
[<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19
[<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb
[<ffffffffb66682f3>] __kmalloc+0x177/0x1f7
[<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d
[<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock]
[<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost]
[<ffffffffb683ddce>] kthread+0xfd/0x105
[<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost]
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
[<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3

Work around by doing kvmalloc instead.

Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Junichi Uekawa <uekawa@chromium.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220928064538.667678-1-uekawa@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vhost: rename vhost_work_dev_flush

This patch renames vhost_work_dev_flush to just vhost_dev_flush to
relfect that it flushes everything on the device and that drivers
don't know/care that polls are based on vhost_works. Drivers just
flush the entire device and polls, and works for vhost-scsi
management TMFs and IO net virtqueues, etc all are flushed.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220517180850.198915-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_vsock: simplify vhost_vsock_flush()

vhost_vsock_flush() calls vhost_work_dev_flush(vsock->vqs[i].poll.dev)
before vhost_work_dev_flush(&vsock->dev). This seems pointless
as vsock->vqs[i].poll.dev is the same as &vsock->dev and several flushes
in a row doesn't do anything useful, one is just enough.

Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220517180850.198915-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: get rid of vhost_poll_flush() wrapper

vhost_poll_flush() is a simple wrapper around vhost_work_dev_flush().
It gives wrong impression that we are doing some work over vhost_poll,
while in fact it flushes vhost_poll->dev.
It only complicate understanding of the code and leads to mistakes
like flushing the same vhost_dev several times in a row.

Just remove vhost_poll_flush() and call vhost_work_dev_flush() directly.

Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
[merge vhost_poll_flush removal from Stefano Garzarella]
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220517180850.198915-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vsock: each transport cycles only on its own sockets

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vhost/vsock: don't check owner in vhost_vsock_stop() while releasing

vhost_vsock_stop() calls vhost_dev_check_owner() to check the device
ownership. It expects current->mm to be valid.

vhost_vsock_stop() is also called by vhost_vsock_dev_release() when
the user has not done close(), so when we are in do_exit(). In this
case current->mm is invalid and we're releasing the device, so we
should clean it anyway.

Let's check the owner only when vhost_vsock_stop() is called
by an ioctl.

When invoked from release we can not fail so we don't check return
code of vhost_vsock_stop(). We need to stop vsock even if it's not
the owner.

Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: cleanup removing `len` variable

We can increment `total_len` directly and remove `len` since it
is no longer used for vhost_add_used().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211122163525.294024-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

vhost/vsock: fix incorrect used length reported to the guest

The "used length" reported by calling vhost_add_used() must be the
number of bytes written by the device (using "in" buffers).

In vhost_vsock_handle_tx_kick() the device only reads the guest
buffers (they are all "out" buffers), without writing anything,
so we must pass 0 as "used length" to comply virtio spec.

Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>

vhost/vsock: support MSG_EOR bit processing

'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present
in packet's header, reset it to 0. Then restore it back if packet
processing wasn't completed. Instead of bool variable for each
flag, bit mask variable was added: it has logical OR of 'MSG_EOR'
and 'MSG_EOM' if needed, to restore flags, this variable is ORed
with flags field of packet.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Link: https://lore.kernel.org/r/20210903123238.3273526-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

virtio/vsock: rename 'EOR' to 'EOM' bit.

This current implemented bit is used to mark end of messages
('EOM' - end of message), not records('EOR' - end of record).
Also rename 'record' to 'message' in implementation as it is
different things.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210903123109.3273053-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: remove work arg from vhost_work_flush

vhost_work_flush doesn't do anything with the work arg. This patch drops
it and then renames vhost_work_flush to vhost_work_dev_flush to reflect
that the function flushes all the works in the dev and not just a
specific queue or work item.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210525174733.6212-2-michael.christie@oracle.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

net: sock: introduce sk_error_report

This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: support SEQPACKET for transport

When received packet is copied to guests's rx queue, data buffers
of rx queue could be smaller that data buffer of input packet, so
data of input packet is copied to each rx buffer, thus each rx
buffer will be a packet with dynamically created header. Fields
of such header are initialized from header of input packet(except
length field which value is depends on number of bytes copied to
rx buffer). But in SEQPACKET case, we also need to take care of
record delimeter bit: if input packet has this bit set, we don't
copy it to header of packet in rx buffer, except case when such
rx buffer is last part of input packet. Otherwise, we will get
sequence of packets with delimeter bit set, thus braking record
bounds.
Also remove ignore of non-stream type of packets, handle SEQPACKET
feature bit.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: add IOTLB API support

This patch enables the IOTLB API support for vhost-vsock devices,
allowing the userspace to emulate an IOMMU for the guest.

These changes were made following vhost-net, in details this patch:
- exposes VIRTIO_F_ACCESS_PLATFORM feature and inits the iotlb
device if the feature is acked
- implements VHOST_GET_BACKEND_FEATURES and
VHOST_SET_BACKEND_FEATURES ioctls
- calls vq_meta_prefetch() before vq processing to prefetch vq
metadata address in IOTLB
- provides .read_iter, .write_iter, and .poll callbacks for the
chardev; they are used by the userspace to exchange IOTLB messages

This patch was tested specifying "intel_iommu=strict" in the guest
kernel command line. I used QEMU with a patch applied [1] to fix a
simple issue (that patch was merged in QEMU v5.2.0):
$ qemu -M q35,accel=kvm,kernel-irqchip=split \
-drive file=fedora.qcow2,format=qcow2,if=virtio \
-device intel-iommu,intremap=on,device-iotlb=on \
-device vhost-vsock-pci,guest-cid=3,iommu_platform=on,ats=on

[1] https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg09077.html

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201223143638.123417-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vhost: allow device that does not depend on vhost worker

vDPA device currently relays the eventfd via vhost worker. This is
inefficient due the latency of wakeup and scheduling, so this patch
tries to introduce a use_worker attribute for the vhost device. When
use_worker is not set with vhost_dev_init(), vhost won't try to
allocate a worker thread and the vhost_poll will be processed directly
in the wakeup function.

This help for vDPA since it reduces the latency caused by vhost worker.

In my testing, it saves 0.2 ms in pings between VMs on a mutual host.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: vsock: kick send_pkt worker once device is started

Ning Bo reported an abnormal 2-second gap when booting Kata container [1].
The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of
connecting from the client side. The vhost vsock client tries to connect
an initializing virtio vsock server.

The abnormal flow looks like:
host-userspace vhost vsock guest vsock
============== =========== ============
connect() --------> vhost_transport_send_pkt_work() initializing
| vq->private_data==NULL
| will not be queued
V
schedule_timeout(2s)
vhost_vsock_start() <--------- device ready
set vq->private_data

wait for 2s and failed
connect() again vq->private_data!=NULL recv connecting pkt

Details:
1. Host userspace sends a connect pkt, at that time, guest vsock is under
initializing, hence the vhost_vsock_start has not been called. So
vq->private_data==NULL, and the pkt is not been queued to send to guest
2. Then it sleeps for 2s
3. After guest vsock finishes initializing, vq->private_data is set
4. When host userspace wakes up after 2s, send connecting pkt again,
everything is fine.

As suggested by Stefano Garzarella, this fixes it by additional kicking the
send_pkt worker in vhost_vsock_start once the virtio device is started. This
makes the pending pkt sent again.

After this patch, kata-runtime (with vsock enabled) boot time is reduced
from 3s to 1s on a ThunderX2 arm64 server.

[1] https://github.com/kata-containers/runtime/issues/1917

Reported-by: Ning Bo <n.b@live.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

vsock/virtio: fix multiple packet delivery to monitoring devices

In virtio_transport.c, if the virtqueue is full, the transmitting
packet is queued up and it will be sent in the next iteration.
This causes the same packet to be delivered multiple times to
monitoring devices.

We want to continue to deliver packets to monitoring devices before
it is put in the virtqueue, to avoid that replies can appear in the
packet capture before the transmitted packet.

This patch fixes the issue, adding a new flag (tap_delivered) in
struct virtio_vsock_pkt, to check if the packet is already delivered
to monitoring devices.

In vhost/vsock.c, we are splitting packets, so we must set
'tap_delivered' to false when we queue up the same virtio_vsock_pkt
to handle the remaining bytes.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: fix packet delivery order to monitoring devices

We want to deliver packets to monitoring devices before it is
put in the virtqueue, to avoid that replies can appear in the
packet capture before the transmitted packet.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: Create accessors for virtqueues private_data

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200331192804.6019-2-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: allow per device message handler

This patch allow device to register its own message handler during
vhost_dev_init(). vDPA device will use it to implement its own DMA
mapping logic.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost/vsock: accept only packets with the right dst_cid

When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.

The host should accept only packets where dst_cid is
equal to the host CID.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: refuse CID assigned to the guest->host transport

In a nested VM environment, we have to refuse to assign to a nested
guest the same CID assigned to our guest->host transport.
In this way, the user can use the local CID for loopback.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock: prevent transport modules unloading

This patch adds 'module' member in the 'struct vsock_transport'
in order to get/put the transport module. This prevents the
module unloading while sockets are assigned to it.

We increase the module refcnt when a socket is assigned to a
transport, and we decrease the module refcnt when the socket
is destructed.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock: add multi-transports support

This patch adds the support of multiple transports in the
VSOCK core.

With the multi-transports support, we can use vsock with nested VMs
(using also different hypervisors) loading both guest->host and
host->guest transports at the same time.

Major changes:
- vsock core module can be loaded regardless of the transports
- vsock_core_init() and vsock_core_exit() are renamed to
vsock_core_register() and vsock_core_unregister()
- vsock_core_register() has a feature parameter (H2G, G2H, DGRAM)
to identify which directions the transport can handle and if it's
support DGRAM (only vmci)
- each stream socket is assigned to a transport when the remote CID
is set (during the connect() or when we receive a connection request
on a listener socket).
The remote CID is used to decide which transport to use:
- remote CID <= VMADDR_CID_HOST will use guest->host transport;
- remote CID == local_cid (guest->host transport) will use guest->host
transport for loopback (host->guest transports don't support loopback);
- remote CID > VMADDR_CID_HOST will use host->guest transport;
- listener sockets are not bound to any transports since no transport
operations are done on it. In this way we can create a listener
socket, also if the transports are not loaded or with VMADDR_CID_ANY
to listen on all transports.
- DGRAM sockets are handled as before, since only the vmci_transport
provides this feature.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock: handle buffer_size sockopts in the core

virtio_transport and vmci_transport handle the buffer_size
sockopts in a very similar way.

In order to support multiple transports, this patch moves this
handling in the core to allow the user to change the options
also if the socket is not yet assigned to any transport.

This patch also adds the '.notify_buffer_size' callback in the
'struct virtio_transport' in order to inform the transport,
when the buffer_size is changed by the user. It is also useful
to limit the 'buffer_size' requested (e.g. virtio transports).

Acked-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()

We are going to add 'struct vsock_sock *' parameter to
virtio_transport_get_ops().

In some cases, like in the virtio_transport_reset_no_sock(),
we don't have any socket assigned to the packet received,
so we can't use the virtio_transport_get_ops().

In order to allow virtio_transport_reset_no_sock() to use the
'.send_pkt' callback from the 'vhost_transport' or 'virtio_transport',
we add the 'struct virtio_transport *' to it and to its caller:
virtio_transport_recv_pkt().

We moved the 'vhost_transport' and 'virtio_transport' definition,
to pass their address to the virtio_transport_recv_pkt().

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

compat_ioctl: move drivers to compat_ptr_ioctl

Each of these drivers has a copy of the same trivial helper function to
convert the pointer argument and then call the native ioctl handler.

We now have a generic implementation of that, so use it.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

vhost/vsock: split packets to send using multiple buffers

If the packets to sent to the guest are bigger than the buffer
available, we can split them, using multiple buffers and fixing
the length in the packet header.
This is safe since virtio-vsock supports only stream sockets.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/virtio: limit the memory used per-socket

Since virtio-vsock was introduced, the buffers filled by the host
and pushed to the guest using the vring, are directly queued in
a per-socket list. These buffers are preallocated by the guest
with a fixed size (4 KB).

The maximum amount of memory used by each socket should be
controlled by the credit mechanism.
The default credit available per-socket is 256 KB, but if we use
only 1 byte per packet, the guest can queue up to 262144 of 4 KB
buffers, using up to 1 GB of memory per-socket. In addition, the
guest will continue to fill the vring with new 4 KB free buffers
to avoid starvation of other sockets.

This patch mitigates this issue copying the payload of small
packets (< 128 bytes) into the buffer of last packet queued, in
order to avoid wasting memory.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482

Based on 1 normalized pattern(s):

this work is licensed under the terms of the gnu gpl version 2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 48 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: vsock: add weight support

This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing vsock kthread from hogging cpu
which is guest triggerable. The weight can help to avoid starving the
request from on direction while another direction is being processed.

The value of weight is picked from vhost-net.

This addresses CVE-2019-3900.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: introduce vhost_exceeds_weight()

We used to have vhost_exceeds_weight() for vhost-net to:

- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX

This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: fix OOB in get_rx_bufs()

After batched used ring updating was introduced in commit e2b3b35eb989
("vhost_net: batch used ring update in rx"). We tend to batch heads in
vq->heads for more than one packet. But the quota passed to
get_rx_bufs() was not correctly limited, which can result a OOB write
in vq->heads.

headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
vhost_len, &in, vq_log, &log,
likely(mergeable) ? UIO_MAXIOV : 1);

UIO_MAXIOV was still used which is wrong since we could have batched
used in vq->heads, this will cause OOB if the next buffer needs more
than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've
batched 64 (VHOST_NET_BATCH) heads:
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>

=============================================================================
BUG kmalloc-8k (Tainted: G B ): Redzone overwritten
-----------------------------------------------------------------------------

INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc
INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674
kmem_cache_alloc_trace+0xbb/0x140
alloc_pd+0x22/0x60
gen8_ppgtt_create+0x11d/0x5f0
i915_ppgtt_create+0x16/0x80
i915_gem_create_context+0x248/0x390
i915_gem_context_create_ioctl+0x4b/0xe0
drm_ioctl_kernel+0xa5/0xf0
drm_ioctl+0x2ed/0x3a0
do_vfs_ioctl+0x9f/0x620
ksys_ioctl+0x6b/0x80
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201
INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b

Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for
vhost-net. This is done through set the limitation through
vhost_dev_init(), then set_owner can allocate the number of iov in a
per device manner.

This fixes CVE-2018-16880.

Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: fix vhost vsock cid hashing inconsistent

The vsock core only supports 32bit CID, but the Virtio-vsock spec define
CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as
zero. This inconsistency causes one bug in vhost vsock driver. The
scenarios is:

0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock
object. And hash_min() is used to compute the hash key. hash_min() is
defined as:
(sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)).
That means the hash algorithm has dependency on the size of macro
argument 'val'.
0. In function vhost_vsock_set_cid(), a 64bit CID is passed to
hash_min() to compute the hash key when inserting a vsock object into
the hash table.
0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min()
to compute the hash key when looking up a vsock for an CID.

Because the different size of the CID, hash_min() returns different hash
key, thus fails to look up the vsock object for an CID.

To fix this bug, we keep CID as u64 in the IOCTLs and virtio message
headers, but explicitly convert u64 to u32 when deal with the hash table
and vsock core.

Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers")
Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.tex
Signed-off-by: Zha Bin <zhabin@linux.alibaba.com>
Reviewed-by: Liu Jiang <gerry@linux.alibaba.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: switch to a mutex for vhost_vsock_hash

Now that there are no more data path users of vhost_vsock_lock, it can
be turned into a mutex. It's only used by .release() and in the
.ioctl() path.

Depends-on: <20181105103547.22018-1-stefanha@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vhost/vsock: fix use-after-free in network stack callers

If the network stack calls .send_pkt()/.cancel_pkt() during .release(),
a struct vhost_vsock use-after-free is possible. This occurs because
.release() does not wait for other CPUs to stop using struct
vhost_vsock.

Switch to an RCU-enabled hashtable (indexed by guest CID) so that
.release() can wait for other CPUs by calling synchronize_rcu(). This
also eliminates vhost_vsock_lock acquisition in the data path so it
could have a positive effect on performance.

This is CVE-2018-14625 "kernel: use-after-free Read in vhost_transport_send_pkt".

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+bd391451452fb0b93039@syzkaller.appspotmail.com
Reported-by: syzbot+e3e074963495f92a89ed@syzkaller.appspotmail.com
Reported-by: syzbot+d5a0a170c5069658b141@syzkaller.appspotmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vhost/vsock: fix reset orphans race with close timeout

If a local process has closed a connected socket and hasn't received a
RST packet yet, then the socket remains in the table until a timeout
expires.

When a vhost_vsock instance is released with the timeout still pending,
the socket is never freed because vhost_vsock has already set the
SOCK_DONE flag.

Check if the close timer is pending and let it close the socket. This
prevents the race which can leak sockets.

Reported-by: Maximilian Riemensberger <riemensberger@cadami.net>
Cc: Graham Whaley <graham.whaley@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: add vsock compat ioctl

This will allow usage of vsock from 32-bit binaries on a 64-bit
kernel.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

drivers: vhost: vsock: fixed a brace coding style issue

Fixed a coding style issue.

Signed-off-by: Vaibhav Murkute <vaibhavmurkute88@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: remove unused lock check flag in vhost_dev_cleanup()

In commit ea5d404655ba ("vhost: fix release path lockdep checks"),
Michael added a flag to check whether we should hold a lock in
vhost_dev_cleanup(), however, in commit 47283bef7ed3 ("vhost: move
memory pointer to VQs"), RCU operations have been replaced by
mutex, we can remove the no-longer-used `locked' parameter now.

Signed-off-by: Caspar Zhang <jinli.zjl@alibaba-inc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost/vsock: fix uninitialized vhost_vsock->guest_cid

The vhost_vsock->guest_cid field is uninitialized when /dev/vhost-vsock
is opened until the VHOST_VSOCK_SET_GUEST_CID ioctl is called.

kvmalloc(..., GFP_KERNEL | __GFP_RETRY_MAYFAIL) does not zero memory.
All other vhost_vsock fields are initialized explicitly so just
initialize this field too.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic

__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator. This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always
ignored for smaller sizes. This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success. This will work independent of the order and overrides the
default allocator behavior. Page allocator users have several levels of
guarantee vs. cost options (take GFP_KERNEL as an example)

- GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
attempt to free memory at all. The most light weight mode which even
doesn't kick the background reclaim. Should be used carefully because
it might deplete the memory and the next user might hit the more
aggressive reclaim

- GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
allocation without any attempt to free memory from the current
context but can wake kswapd to reclaim memory if the zone is below
the low watermark. Can be used from either atomic contexts or when
the request is a performance optimization and there is another
fallback for a slow path.

- (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
non sleeping allocation with an expensive fallback so it can access
some portion of memory reserves. Usually used from interrupt/bh
context with an expensive slow path fallback.

- GFP_KERNEL - both background and direct reclaim are allowed and the
_default_ page allocator behavior is used. That means that !costly
allocation requests are basically nofail but there is no guarantee of
that behavior so failures have to be checked properly by callers
(e.g. OOM killer victim is allowed to fail currently).

- GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
and all allocation requests fail early rather than cause disruptive
reclaim (one round of reclaim in this implementation). The OOM killer
is not invoked.

- GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
behavior and all allocation requests try really hard. The request
will fail if the reclaim cannot make any progress. The OOM killer
won't be triggered.

- GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
and all allocation requests will loop endlessly until they succeed.
This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic. No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vhost/vsock: use static minor number

Vhost-vsock is a software device so there is no probe call that causes
the driver to register its misc char device node. This creates a
chicken and egg problem: userspace applications must open
/dev/vhost-vsock to use the driver but the file doesn't exist until the
kernel module has been loaded.

Use the devname modalias mechanism so that /dev/vhost-vsock is created
at boot. The vhost_vsock kernel module is automatically loaded when the
first application opens /dev/host-vsock.

Note that the "reserved for local use" range in
Documentation/admin-guide/devices.txt is incorrect. The userio driver
already occupies part of that range. I've updated the documentation
accordingly.

Cc: device@lanana.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: support __GFP_REPEAT in kvmalloc_node for >32kB

vhost code uses __GFP_REPEAT when allocating vhost_virtqueue resp.
vhost_vsock because it would really like to prefer kmalloc to the
vmalloc fallback - see 23cc5a991c7a ("vhost-net: extend device
allocation to vmalloc") for more context. Michael Tsirkin has also
noted:

"__GFP_REPEAT overhead is during allocation time. Using vmalloc means
all accesses are slowed down. Allocation is not on data path, accesses
are."

The similar applies to other vhost_kvzalloc users.

Let's teach kvmalloc_node to handle __GFP_REPEAT properly. There are
two things to be careful about. First we should prevent from the OOM
killer and so have to involve __GFP_NORETRY by default and secondly
override __GFP_REPEAT for !costly order requests as the __GFP_REPEAT is
ignored for !costly orders.

Supporting __GFP_REPEAT like semantic for !costly request is possible it
would require changes in the page allocator. This is out of scope of
this patch.

This patch shouldn't introduce any functional change.

Link: http://lkml.kernel.org/r/20170306103032.2540-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

VSOCK: Add virtio vsock vsockmon hooks

The virtio drivers deal with struct virtio_vsock_pkt. Add
virtio_transport_deliver_tap_pkt(pkt) for handing packets to the
vsockmon device.

We call virtio_transport_deliver_tap_pkt(pkt) from
net/vmw_vsock/virtio_transport.c and drivers/vhost/vsock.c instead of
common code. This is because the drivers may drop packets before
handing them to common code - we still want to capture them.

Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost-vsock: add pkt cancel capability

To allow canceling all packets of a connection.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: handle vhost_vq_init_access() error

Propagate the error when vhost_vq_init_access() fails and set
vq->private_data to NULL.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vsock: lookup and setup guest_cid inside vhost_vsock_lock

Multi vsocks may setup the same cid at the same time.

Signed-off-by: Gao feng <omarapazanadi@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

vhost-vsock: fix orphan connection reset

local_addr.svm_cid is host cid. We should check guest cid instead,
which is remote_addr.svm_cid. Otherwise we end up resetting all
connections to all guests.

Cc: stable@vger.kernel.org [4.8+]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost-vsock: remove unused vq variable

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: fix vhost virtio_vsock_pkt use-after-free

Stash the packet length in a local variable before handing over
ownership of the packet to virtio_transport_recv_pkt() or
virtio_transport_free_pkt().

This patch solves the use-after-free since pkt is no longer guaranteed
to be alive.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

VSOCK: Use kvfree()

Use kvfree() instead of open-coding it.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

VSOCK: Introduce vhost_vsock.ko

VM sockets vhost transport implementation. This driver runs on the
host.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "Merge branch 'vsock-virtio'"

This reverts commit 0d76d6e8b2507983a2cae4c09880798079007421 and merge
commit c402293bd76fbc93e52ef8c0947ab81eea3ae019, reversing changes made
to c89359a42e2a49656451569c382eed63e781153c.

The virtio-vsock device specification is not finalized yet. Michael
Tsirkin voiced concerned about merging this code when the hardware
interface (and possibly the userspace interface) could still change.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VSOCK: fix returnvar.cocci warnings

Remove unneeded variable used to store return value.

Generated by: scripts/coccinelle/misc/returnvar.cocci

CC: Asias He <asias@redhat.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VSOCK: Introduce vhost-vsock.ko

VM sockets vhost transport implementation. This module runs in host
kernel.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>