vfio/pds: Add support for dirty page tracking

In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.

All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.

In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.

PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.

PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.

PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.

PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio/pds: Add VFIO live migration support

Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.

The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.

PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.

PDS_LM_CMD_RESUME is added to support the VF device resume operation.

PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.

PDS_LM_CMD_SAVE is added to get the VF device state data.

PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.

PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio/pds: register with the pds_core PF

The pds_core driver will supply adminq services, so find the PF
and register with the DSC services.

Use the following commands to enable a VF:
echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-5-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

vfio/pds: Initial support for pds VFIO driver

This is the initial framework for the new pds-vfio-pci device driver.
This does the very basics of registering the PDS PCI device and
configuring it as a VFIO PCI device.

With this change, the VF device can be bound to the pds-vfio-pci driver
on the host and presented to the VM as an ethernet VF.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>