#
9a9e1be1 |
|
29-Sep-2022 |
Arnd Bergmann <arnd@arndb.de> |
ARM: sa1100: remove unused board files The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and Simpad machines were all marked as unused as there are no known users left. Remove all of these, along with references to them in defconfig files and drivers. Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600 and Jornada 720, each of which had one person still using them, with Collie also being supported in Qemu. Cc: Peter Chubb <peter.chubb@unsw.edu.au> Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
9ba26f5c |
|
03-Feb-2022 |
Arnd Bergmann <arnd@arndb.de> |
ARM: sa1100/assabet: move dmabounce hack to ohci driver The sa1111 platform is one of the two remaining users of the old Arm specific "dmabounce" code, which is an earlier implementation of the generic swiotlb. Linus Walleij submitted a patch that removes dmabounce support from the ixp4xx, and I had a look at the other user, which is the sa1111 companion chip. Looking at how dmabounce is used, I could narrow it down to one driver one three machines: - dmabounce is only initialized on assabet/neponset, jornada720 and badge4, which are the platforms that have an sa1111 and support DMA on it. - All three of these suffer from "erratum #7" that requires only doing DMA to half the memory sections based on one of the address lines, in addition, the neponset also can't DMA to the RAM that is connected to sa1111 itself. - the pxa lubbock machine also has sa1111, but does not support DMA on it and does not set dmabounce. - only the OHCI and audio devices on sa1111 support DMA, but as there is no audio driver for this hardware, only OHCI remains. In the OHCI code, I noticed that two other platforms already have a local bounce buffer support in the form of the "local_mem" allocator. Specifically, TMIO and SM501 use this on a few other ARM boards with 16KB or 128KB of local SRAM that can be accessed from the OHCI and from the CPU. While this is not the same problem as on sa1111, I could not find a reason why we can't re-use the existing implementation but replace the physical SRAM address mapping with a locally allocated DMA buffer. There are two main downsides: - rather than using a dynamically sized pool, this buffer needs to be allocated at probe time using a fixed size. Without having any idea of what it should be, I picked a size of 64KB, which is between what the other two OHCI front-ends use in their SRAM. If anyone has a better idea what that size is reasonable, this can be trivially changed. - Previously, only USB transfers to unaddressable memory needed to go through the bounce buffer, now all of them do, which may impact runtime performance for USB endpoints that do a lot of transfers. On the upside, the local_mem support uses write-combining buffers, which should be a bit faster for transfers to the device compared to normal uncached coherent memory as used in dmabounce. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
074a6bda |
|
14-Jan-2021 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct sa1111_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
#
7b81cb6b |
|
16-Aug-2019 |
Christoph Hellwig <hch@lst.de> |
usb: add a HCD_DMA flag instead of guestimating DMA capabilities The usb core is the only major place in the kernel that checks for a non-NULL device dma_mask to see if a device is DMA capable. This is generally a bad idea, as all major busses always set up a DMA mask, even if the device is not DMA capable - in fact bus layers like PCI can't even know if a device is DMA capable at enumeration time. This leads to lots of workaround in HCD drivers, and also prevented us from setting up a DMA mask for platform devices by default last time we tried. Replace this guess with an explicit HCD_DMA that is set by drivers that appear to have DMA support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190816062435.881-4-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
5fd54ace |
|
03-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: add SPDX identifiers to all remaining files in drivers/usb/ It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
263bf612 |
|
26-Sep-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
usb: ohci-sa1111: remove special sa1111 mmio accessors Remove the special SA1111 MMIO accessors from the ohci-sa1111 driver as their definition will be removed shortly. The SA1111 accessors are barrierless, so use the _relaxed variants. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
6c771d30 |
|
26-Sep-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
usb: ohci-sa1111: convert shutdown method to native device_driver Convert the shutdown method to use the device_driver shutdown function pointer rather than a private bus-type shutdown. This is the only user for SA1111 bus types, so having the support code in the bus doesn't make any sense. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
78655197 |
|
26-Sep-2017 |
Russell King <rmk+kernel@armlinux.org.uk> |
usb: ohci-sa1111: use sa1111_get_irq() to obtain IRQ resources Use the provided sa1111_get_irq() to fetch the IRQ resources for the SA1111 OHCI driver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
70efb643 |
|
26-Aug-2016 |
Russell King <rmk+kernel@armlinux.org.uk> |
usb: ohci-sa1111: remove mach/hardware.h include The mach/hardware.h include doesn't seem to be necessary to build ohci-sa1111, so let's remove it to kill off an unnecessary platform specific include. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
6ebb8f0f |
|
26-Aug-2016 |
Russell King <rmk+kernel@armlinux.org.uk> |
usb: ohci-sa1111: remove machine_has_neponset() The neponset is a daughter board for the Assabet platform, which has a SA1111 chip on it. If we're initialising the SA1111 OHCI, and we're part of a neponset, the host platform must be an Assabet. This allows us to eliminate machine_has_neponset() from this driver, replacing it instead with machine_is_assabet(), and killing the mach/assabet.h include. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
3c9740a1 |
|
04-Nov-2013 |
Peter Chen <peter.chen@freescale.com> |
usb: hcd: move controller wakeup setting initialization to individual driver Individual controller driver has different requirement for wakeup setting, so move it from core to itself. In order to align with current etting the default wakeup setting is enabled (except for chipidea host). Pass compile test with below commands: make O=outout/all allmodconfig make -j$CPU_NUM O=outout/all drivers/usb Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
4ffb4318 |
|
27-Jun-2013 |
Russell King <rmk+kernel@arm.linux.org.uk> |
DMA-API: usb: ohci-sa1111: add a note about DMA masks Add a comment to explain why this driver doesn't call any of the DMA API dma_set_mask() functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
41ac7b3a |
|
19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
usb: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
3879e304 |
|
01-May-2012 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: ohci-sa1111.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
81e6ca3e |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
USB: sa1111: add hcd .reset method Add the .reset method to the HCD, and update the .start method accordingly for this change. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
846a7048 |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
USB: sa1111: add OHCI shutdown methods Add OHCI shutdown methods to cleanly shutdown the OHCI controller on system shutdowns and reboots. This avoids the controller continuing to run should be soft-reboot the platform, potentially scribbling over system memory. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
132db99a |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
USB: sa1111: reorganize ohci-sa1111.c Combine usb_hcd_sa1111_probe() and ohci_hcd_sa1111_drv_probe(), doing the same for the remove methods. Move sa1111_start_hc and sa1111_stop_hc to be located next to these the probe/release functions, as they're only called from them. Get rid of the /*----*/ breaker lines. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
3f878dbc |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) Use dev_dbg() instead, it's more friendly. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
9cb0f819 |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
USB: sa1111: sparse and checkpatch cleanups Clean up the ohci-sa1111 driver formatting to be more compliant with current standards, and add 'static' to various function definitions to avoid sparse complaints about undeclared functions. Remove the unnecessary local declaration of 'usb_disabled', which can be found instead in linux/usb.h. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
2213536d |
|
16-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
ARM: sa1111: move USB interface register definitions to ohci-sa1111.c Move the USB interface register definitions into the driver, rather than keeping them in a common place. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
3259701c |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
ARM: sa11x0: badge4: move board specific ohci initialization to badge4.c Move the handling of the 5v supply into badge4.c, removing this board specific detail from the sa1111 ohci driver. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
ae99ddbc |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
ARM: sa1111: add platform enable/disable functions Add platform hooks to be called when individual sa1111 devices are enabled and disabled. This will allow us to move some platform specifics out of the individual drivers. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
1ebcd765 |
|
26-Jan-2012 |
Russell King <rmk+kernel@arm.linux.org.uk> |
ARM: sa1111: add .owner initializer to sa1111 driver structures Add a .owner initializer to the sa1111 driver structures to allow allow the modules to be associated with their driver structures. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
b5dd18d8 |
|
07-Sep-2011 |
Yong Zhang <yong.zhang0@gmail.com> |
USB: irq: Remove IRQF_DISABLED This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
28f65c11 |
|
09-Jun-2011 |
Joe Perches <joe@perches.com> |
treewide: Convert uses of struct resource to resource_size(ptr) Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
f45ba776 |
|
05-Feb-2010 |
Joe Perches <joe@perches.com> |
USB: Convert concatenated __FILE__ to %s, __FILE__ Reduces string space a bit Neaten a macro redefine of dbg Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
b5fb454f |
|
20-Aug-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: automatically enable RHSC interrupts This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
a09e64fb |
|
05-Aug-2008 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
be509729 |
|
04-Aug-2008 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
ac310bb5 |
|
10-Jul-2008 |
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> |
Fix name of Russell King in various comments This patch was created by git grep -E -l 'Rus(el|s?e)l King' | xargs -r -t perl -p -i -e 's/Rus(el|s?e)l King/Russell King/g' Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Most-Definitely-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
09ca8adb |
|
06-Jul-2008 |
Linus Torvalds <torvalds@linux-foundation.org> |
Revert "USB: don't explicitly reenable root-hub status interrupts" This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e8721549 |
|
13-Apr-2008 |
Alan Stern <stern@rowland.harvard.edu> |
USB: don't explicitly reenable root-hub status interrupts This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
5e16fabe |
|
13-Dec-2006 |
Sylvain Munaut <tnt@246tNt.com> |
ohci: Rework bus glue integration to allow several at once The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
dd9048af |
|
05-Dec-2006 |
David Brownell <david-b@pacbell.net> |
USB: ohci whitespace/comment fixups This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
d413984a |
|
04-Aug-2006 |
David Brownell <david-b@pacbell.net> |
USB: OHCI avoids root hub timer polling This teaches OHCI to use the root hub status change (RHSC) IRQ, bypassing root hub timers most of the time and switching over to the "new" root hub polling scheme. It's complicated by the fact that implementations of OHCI trigger and ack that IRQ differently (the spec is vague there). Avoiding root hub timers helps mechanisms like "dynamic tick" leave the CPU in lowpower modes for longer intervals. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
d54b5caa |
|
01-Jul-2006 |
Thomas Gleixner <tglx@linutronix.de> |
[PATCH] irq-flags: usb: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
0c0382e3 |
|
13-Oct-2005 |
Alan Stern <stern@rowland.harvard.edu> |
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
9293677a |
|
22-Sep-2005 |
David Brownell <david-b@pacbell.net> |
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
|
#
8ad7fe16 |
|
13-Sep-2005 |
David Brownell <david-b@pacbell.net> |
[PATCH] remove some USB_SUSPEND dependencies This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-)
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|