usb: gadget: aspeed: Rectify a bit a random header inclusion

It looks like the driver copied'n'pasted almost random set of
headers for its code. Rectify it a bit by removing of_gpio.h
that is not only unused, but also will be removed in the future
completely.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230313155310.80022-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: aspeed: Fix probe regression

Since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets"),
the gadget devices are proper driver core devices, which caused each
device to request pinmux settings:

aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 mode
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin A7 already requested by 1e6a0000.usb-vhub; cannot claim for gadget.0
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin-232 (gadget.0) status -22
aspeed-g5-pinctrl 1e6e2080.pinctrl: could not request pin 232 (A7) from group USB2AD on device aspeed-g5-pinctrl
g_mass_storage gadget.0: Error applying setting, reverse things back

The vhub driver has already claimed the pins, so prevent the gadgets
from requesting them too by setting the magic of_node_reused flag. This
causes the driver core to skip the mux request.

Reported-by: Zev Weiss <zev@bewilderbeest.net>
Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Link: https://lore.kernel.org/r/20221017053006.358520-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: aspeed-vhub: support test mode feature

Support aspeed usb vhub set feature to test mode.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: https://lore.kernel.org/r/20211208100545.1441397-5-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: aspeed: Remove repeated verbose license text

remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210823045807.49-1-caihuoqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: aspeed: read vhub properties from device tree

The patch introduces 2 DT properties ("aspeed,vhub-downstream-ports" and
"aspeed,vhub-generic-endpoints") which replaces hardcoded port/endpoint
number. It is to make it more convenient to add support for newer vhub
revisions with different number of ports and endpoints.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

usb: gadget: aspeed: Remove unused "suspended" flag

The state bit in the hub is sufficient

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

usb: gadget: aspeed: Rework the reset logic

We had some dodgy code using the speed setting to decide whether a
port reset would reset the device or just enable it.

Instead, if the device is disabled and has a gadget attached, a
reset will enable it. If it's already enabled, a reset will
reset it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

usb: gadget: aspeed: Check suspend/resume callback existence

.. before calling them

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

usb: gadget: aspeed: Don't reject requests on suspended devices

A disconnect may just suspend the hub in absence of a physical
disconnect detection. If we start rejecting requests, the mass
storage function gets into a spin trying to requeue the same
request for ever and hangs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

usb: gadget: aspeed: Cleanup EP0 state on port reset

Otherwise, we can have a stale state after a disconnect and reconnect
causing errors on the first SETUP packet to the device.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

usb: gadget: aspeed-vhub: constify usb_gadget_ops structure

The usb_gadget_ops structure can be const as it is only stored in
the ops field of a usb_gadget structure and this field is const.

Done with the help of Coccinelle.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

usb/gadget: Add driver for Aspeed SoC virtual hub

The Aspeed BMC SoCs support a "virtual hub" function. It provides some
HW support for a top-level USB2 hub behind which sit 5 gadget "ports".

This driver adds support for the full functionality, emulating the
hub standard requests and exposing 5 UDC gadget drivers corresponding
to the ports.

The hub itself has HW provided dedicated EP0 and EP1 (the latter for
hub interrupts). It also has dedicated EP0s for each function. For
other endpoints, there's a pool of 15 "generic" endpoints that are
shared among the ports.

The driver relies on my previous patch adding a "dispose" EP op to
handle EP allocation between ports. EPs are allocated from the shared
pool in the UDC "match_ep" callback and assigned to the UDC instance
(added to the gadget ep_list).

When the composite driver gets unbound, the new hook will allow the UDC
to clean things up and return those EPs to the shared pool.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>