usb: gadget: remove max support speed info in bind operation

Take ecm_bind() for example, it call gadget_is_{*}speed() API to show
gadget max support speed, it is not much help, remove the API usage here
is safe.

Similar change apply to acm,eem,loopback,ncm,obex,rndis,serial,
sourcesink,subset functions.

Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-8-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: add a inline function gether_bitrate()

In function ecm_bitrate(), it is not support report bit rate for super
speed plus mode, but it can use same bit rate value defined in ncm and
rndis.

Add a common inline function gether_bitrate() which report different for
all possible speeds, it can be used by ecm, ncm and rndis, also remove
old function from them.

Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-3-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: use working speed to calcaulate network bitrate and qlen

Take ecm_bitrate() as example, it will be called after gadget device
link speed negotiation, consider code
if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER),
if a gadget device link speed is USB_SPEED_SUPER,
gadget_is_superspeed(g) must be true, or not it is a wrong
configuration of gadget max support speed.

Remove gadget_is_superspeed(g) checking should be safe, and remove other
similar operation in ncm, rndis, u_ether.

Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-2-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

When host sends suspend notification to the device, handle
the suspend callbacks in the function driver. Depending on
the remote wakeup capability the device can either trigger a
remote wakeup or wait for the host initiated resume to resume
data transfer.

Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1679694482-16430-7-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_ecm: Always set current gadget in ecm_bind()

The gadget may change over bind/unbind cycles, so set it each time during
bind, not only the first time. Without it we get a use-after-free with
the following example:

cd /sys/kernel/config/usb_gadget/; mkdir -p mygadget; cd mygadget
mkdir -p configs/c.1/strings/0x409
echo "C1:Composite Device" > configs/c.1/strings/0x409/configuration
mkdir -p functions/ecm.usb0
ln -s functions/ecm.usb0 configs/c.1/
rmmod dummy_hcd
modprobe dummy_hcd

KASAN will complain shortly after the 'modprobe':

usb 2-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 6.01
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
==================================================================
BUG: KASAN: use-after-free in gether_connect+0xb8/0x30c
Read of size 4 at addr cbef170c by task swapper/3/0

CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.1.0-rc3-00014-g41ff012f50cb-dirty #322
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from print_report+0x134/0x4d4
print_report from kasan_report+0x78/0x10c
kasan_report from gether_connect+0xb8/0x30c
gether_connect from ecm_set_alt+0x124/0x254
ecm_set_alt from composite_setup+0xb98/0x2b18
composite_setup from configfs_composite_setup+0x80/0x98
configfs_composite_setup from dummy_timer+0x8f0/0x14a0 [dummy_hcd]
...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221104131031.850850-3-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: fix various gadgets null ptr deref on 10gbps cabling.

This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.

Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_ecm: Use atomic_t to track in-flight request

Currently ecm->notify_req is used to flag when a request is in-flight.
ecm->notify_req is set to NULL and when a request completes it is
subsequently reset.

This is fundamentally buggy in that the unbind logic of the ECM driver will
unconditionally free ecm->notify_req leading to a NULL pointer dereference.

Fixes: da741b8c56d6 ("usb ethernet gadget: split CDC Ethernet function")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: fix wrong endpoint desc

Gadget driver should always use config_ep_by_speed() to initialize
usb_ep struct according to usb device's operating speed. Otherwise,
usb_ep struct may be wrong if usb devcie's operating speed is changed.

The key point in this patch is that we want to make sure the desc pointer
in usb_ep struct will be set to NULL when gadget is disconnected.
This will force it to call config_ep_by_speed() to correctly initialize
usb_ep struct based on the new operating speed when gadget is
re-connected later.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

usb: gadget: f_ecm: fix host mac address for multiple instances

In case there are multiple ecm instances, either for multiple
otg controllers, or multiple virtual links using libcomposite,
each instance needs to have its own host mac address string
value for iMACAddress.

Update the source array (ecm_string_defs), every time before
usb_gstrings_attach(). Without that, all links wrongly were
getting the same, last allocated, host mac address, rather
than the correct one, as requested via configfs.

Signed-off-by: Lukasz Nowak <lukasz.nowak@exablue.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

USB: gadget: function: Remove redundant license text

Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Oliver Neukum <oneukum@suse.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jerry Zhang <zhangjerry@google.com>
Cc: John Keeping <john@metanate.com>
Cc: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Abdulhadi Mohamed <abdulahhadi2@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: add SPDX identifiers to all remaining files in drivers/usb/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: make config_item_type structures const

Make these structures const as they are only passed to the const
argument of the functions config_{group/item}_init_type_name.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus

Add the 'ssp_descriptors' parameter to the usb_assign_descriptors()
function. This allows a function driver to add descriptors for
SuperSpeedPlus speeds if it supports it.

Also update all uses of this function in the gadget subsystem so that
they pass NULL for the ssp_descriptors parameters.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

usb-gadget/ether: use per-attribute show and store methods

To simplify the configfs interface and remove boilerplate code that also
causes binary bloat.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

usb: gadget: f_ecm: eliminate abuse of ep->driver data

Since ep->driver_data is not used for endpoint claiming, neither for
enabled/disabled state storing, we can reduce number of places where
we read or modify it's value, as now it has no particular meaning for
function or framework logic.

In case of f_ecm, ep->driver_data was used only for endpoint claiming
and marking endpoints as enabled, so we can simplify code by reducing
it.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

usb: gadget: f_ecm/f_ncm: check quirk instead of UDC name

Use generic mechanism to check if UDC controller supports zlp.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

usb: gadget: Gadget directory cleanup - group usb functions

The drivers/usb/gadget directory contains many files.
Files which are related can be distributed into separate directories.
This patch moves the USB functions implementations into a separate directory.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>