#
484468fb |
|
18-Jul-2023 |
Rob Herring <robh@kernel.org> |
usb: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
2037f299 |
|
15-Jul-2021 |
Chunfeng Yun <chunfeng.yun@mediatek.com> |
usb: common: add helper to get role-switch-default-mode Add helper to get "role-switch-default-mode", and convert it to the corresponding enum usb_dr_mode Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
365038f2 |
|
07-Mar-2021 |
Chunfeng Yun <chunfeng.yun@mediatek.com> |
usb: common: move function's kerneldoc next to its definition Following a general rule, add the kerneldoc for a function next to it's definition, but not next to its declaration in a header file. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/c4d2e010ae2bf67cdfa0b55e6d1deb9339d9d3dc.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
fb95c7cf |
|
07-Mar-2021 |
Chunfeng Yun <chunfeng.yun@mediatek.com> |
usb: common: add function to get interval expressed in us unit Add a new function to convert bInterval into the time expressed in 1us unit. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/25c8a09b055f716c1e5bf11fea72c3418f844482.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
52c2d157 |
|
19-Jan-2021 |
Thinh Nguyen <Thinh.Nguyen@synopsys.com> |
usb: common: Parse for USB SSP genXxY The USB "maximum-speed" property can now take the SSP signaling rate generation and lane count with these new strings: "super-speed-plus-gen2x2" "super-speed-plus-gen2x1" "super-speed-plus-gen1x2" Introduce usb_get_maximum_ssp_rate() to parse for the corresponding usb_ssp_rate enum. The original usb_get_maximum_speed() will return USB_SPEED_SUPER_PLUS if it matches one of these new strings. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f8ed896313d8cd8e2d2b540fc82db92b3ddf8a47.1611106162.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
812086d3 |
|
05-Jun-2019 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: move usb debugfs directory creation to the usb common core The USB gadget subsystem wants to use the USB debugfs root directory, so move it to the common "core" USB code so that it is properly initialized and removed as needed. In order to properly do this, we need to load the common code before the usb core code, when everything is linked into the kernel, so reorder the link order of the code. Also as the usb common code has the possibility of the led trigger logic to be merged into it, handle the build option properly by only having one module init/exit function and have the common code initialize the led trigger if needed. Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
4035c5b5 |
|
20-Mar-2019 |
Chunfeng Yun <chunfeng.yun@mediatek.com> |
usb: introduce usb_ep_type_string() function In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
#
4d537f37 |
|
20-Mar-2019 |
Chunfeng Yun <chunfeng.yun@mediatek.com> |
usb: introduce usb_ep_type_string() function In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
238e0268 |
|
01-Mar-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
usb: common: Consider only available nodes for dr_mode There are cases where multiple device tree nodes point to the same phy node by means of the "phys" property, but we should only consider those nodes that are marked as available rather than just any node. Fixes: 98bfb3946695 ("usb: of: add an api to get dr_mode by the phy node") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
fa827966 |
|
19-Aug-2018 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
usb: Change usb_of_get_companion_dev() place to usb/common Since renesas_usb3 udc driver calls usb_of_get_companion_dev() which is on usb/core/of.c, build error like below happens if we disable CONFIG_USB because the usb/core/ needs CONFIG_USB: ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! According to the usb/gadget/Kconfig, "NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!". So, to fix the issue, this patch changes the usb_of_get_companion_dev() place from usb/core/of.c to usb/common/common.c to be called by both host and gadget. Reported-by: John Garry <john.garry@huawei.com> Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
366122af |
|
02-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: common: Remove redundant license text Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
5fd54ace |
|
03-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
USB: add SPDX identifiers to all remaining files in drivers/usb/ It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
334007d5 |
|
20-Aug-2017 |
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
usb: common: use of_property_read_bool() Use more compact of_property_read_bool() calls for the boolean properties instead of of_find_property() calls in of_usb_host_tpl_support() and of_usb_update_otg_caps(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
d9241ff2 |
|
18-Jul-2017 |
Rob Herring <robh@kernel.org> |
usb: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
ce15ed4c |
|
10-Jun-2016 |
Hans de Goede <hdegoede@redhat.com> |
USB: Fix of_usb_get_dr_mode_by_phy with a shared phy block Some SoCs have a single phy-hw-block with multiple phys, this is modelled by a single phy dts node, so we end up with multiple controller nodes with a phys property pointing to the phy-node of the otg-phy. Only one of these controllers typically is an otg controller, yet we were checking the first controller who uses a phy from the block and then end up looking for a dr_mode property in e.g. the ehci controller. This commit fixes this by adding an arg0 parameter to of_usb_get_dr_mode_by_phy and make of_usb_get_dr_mode_by_phy check that this matches the phandle args[0] value when looking for the otg controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
#
efc2cd79 |
|
17-Mar-2016 |
Heikki Krogerus <heikki.krogerus@linux.intel.com> |
usb: common: convert to use match_string() helper The new helper returns index of the mathing string in an array. We would use it here. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8a1b2725 |
|
10-Dec-2015 |
Mathias Nyman <mathias.nyman@linux.intel.com> |
usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
98bfb394 |
|
03-Nov-2015 |
Bin Liu <b-liu@ti.com> |
usb: of: add an api to get dr_mode by the phy node Some USB phy drivers have different handling for the controller in each dr_mode. But the phy driver does not have visibility to the dr_mode of the controller. This adds an api to return the dr_mode of the controller which associates the given phy node. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
#
06e7114f |
|
21-Sep-2015 |
Heikki Krogerus <heikki.krogerus@linux.intel.com> |
usb: common: of_usb_get_dr_mode to usb_get_dr_mode By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
#
63863b98 |
|
21-Sep-2015 |
Heikki Krogerus <heikki.krogerus@linux.intel.com> |
usb: common: of_usb_get_maximum_speed to usb_get_maximum_speed By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
#
929412d9 |
|
09-Jul-2015 |
Li Jun <jun.li@freescale.com> |
usb: common: add API to update usb otg capabilities by device tree Check property of usb hardware to update otg version and disable SRP, HNP and ADP if its disable flag is present. Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
#
aa923ef1 |
|
24-Sep-2014 |
Michal Sojka <sojka@merica.cz> |
usb: Rename usb-common.c In the next commit, we will want the usb-common module to be composed of two object files. Since Kbuild cannot "append" another object to an existing one, we need to rename usb-common.c to something else (common.c) and create usb-common.o by linking the wanted objects together. Currently, usb-common.o comprises only common.o. Signed-off-by: Michal Sojka <sojka@merica.cz> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|