staging: bcm2835-audio: remove compat ALSA card

Remove compat ALSA card, which has overlapping functionality with the
two other cards described by the driver (HDMI and headphones)

This handles TODO item "Revisit multi-cards options and PCM route mixer
control".

Move the S/PDIF device that was part of the compat ALSA card to the HDMI
card.

Only enable headphones card by default, because HDMI breaks when using
both vc4 and bcm2835-audio with HDMI card enabled.

Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220408150359.26661-1-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()

Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:

[ 58.480634] ------------[ cut here ]------------
[ 58.485321] kernel BUG at lib/string.c:1149!
[ 58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[ 58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G C OE 5.11.0-1001-raspi #1
[ 58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[ 58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 58.584178] pc : fortify_panic+0x20/0x24
[ 58.588161] lr : fortify_panic+0x20/0x24
[ 58.592136] sp : ffff800010a83990
[ 58.595491] x29: ffff800010a83990 x28: 0000000000000002
[ 58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[ 58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[ 58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[ 58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[ 58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[ 58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[ 58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[ 58.638588] x13: 0720072007200720 x12: 0720072007200720
[ 58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[ 58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[ 58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[ 58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[ 58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[ 58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[ 58.676299] Call trace:
[ 58.678775] fortify_panic+0x20/0x24
[ 58.682402] snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[ 58.688247] platform_probe+0x74/0xe4
[ 58.691963] really_probe+0xf0/0x510
[ 58.695585] driver_probe_device+0xe0/0x100
[ 58.699826] device_driver_attach+0xcc/0xd4
[ 58.704068] __driver_attach+0xb0/0x17c
[ 58.707956] bus_for_each_dev+0x7c/0xd4
[ 58.711843] driver_attach+0x30/0x40
[ 58.715467] bus_add_driver+0x154/0x250
[ 58.719354] driver_register+0x84/0x140
[ 58.723242] __platform_driver_register+0x34/0x40
[ 58.728013] bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[ 58.734024] do_one_initcall+0x54/0x300
[ 58.737914] do_init_module+0x60/0x280
[ 58.741719] load_module+0x680/0x770
[ 58.745344] __do_sys_finit_module+0xbc/0x130
[ 58.749761] __arm64_sys_finit_module+0x2c/0x40
[ 58.754356] el0_svc_common.constprop.0+0x88/0x220
[ 58.759216] do_el0_svc+0x30/0xa0
[ 58.762575] el0_svc+0x28/0x70
[ 58.765669] el0_sync_handler+0x1a4/0x1b0
[ 58.769732] el0_sync+0x178/0x180
[ 58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[ 58.779275] ---[ end trace 29be5b17497bd898 ]---
[ 58.783955] note: insmod[1959] exited with preempt_count 1
[ 58.791921] ------------[ cut here ]------------

For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04-services: bcm2835-audio: Fix alignment issues

Fix all the alignment with open parenthesis issues
detected by checkpatch

Signed-off-by: Daniela Mormocea <daniela.mormocea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Simplify kctl creation helpers

Just a minor code refactoring and adding some const prefix.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Fix mute controls, volume handling cleanup

In the current code, the mute control is dealt in a special manner,
modifying the current volume and saving the old volume, etc. This is
inconsistent (e.g. change the volume while muted, then unmute), and
way too complex.

Also, the whole volume handling code has conversion between ALSA
volume and raw volume values, which can lead to another
inconsistency and complexity.

This patch simplifies these points:
- The ALSA volume value is saved in chip->volume
- volume->mute saves the mute state
- The mute state is evaluated only when the actual volume is passed to
the hardware, bcm2835_audio_set_ctls()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove redundant substream mask checks

The avail_substreams bit mask is checked for the possible racy
accesses, but this cannot happen in practice; i.e. the assignment and
the check are superfluous.

Let's rip them off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Clean up include files in bcm2835-ctl.c

Only a few of them are really needed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove redundant spdif stream ctls

The "IEC958 Playback Stream" control does basically the very same
thing as "IEC958 Playback Default" redundantly. The former should
have been stream-specific and restored after closing the stream, but
we don't do in that way.

Since it's nothing but confusion, remove this fake.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Clean up mutex locks

snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in
all places, which don't make sense. Replace them with the simple
mutex_lock().

Also taking a mutex lock right after creating it for each PCM object
is nonsense, too. It cannot be racy at that point. We can get rid of
it.

Last but not least, initializing chip->audio_mutex at each place is
error-prone. Initialize properly at creating the chip object in
snd_bcm2835_create() instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: bcm2835-audio: remove redundant license text

Now that the SPDX tag is in all
drivers/staging/vc04_services/bcm2835-audio/ files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: bcm2835-audio: add SPDX identifiers

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Fix up the bcm2835-audio driver to have a proper SPDX identifier, based
on the license text in the file itself. The SPDX identifier is a
legally binding shorthand, which can be used instead of the full boiler
plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <bcm-kernel-feedback-list@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: remove unnecessary log messages

Remove unnecessary log messages in the driver which are just tracking
function entry and exits.

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio

The firmware for the Raspberry PI already supports simultanous output
of audio through both the HDMI and the Headphone jack. The current
implementation of ALSA doesn't expose this well to user mode since
the firmware audio is represented as a single card.

A newer approach is taken here and a virtual card is created for each
output(HDMI, Headphones, and Traditional ALSA). The firmware has
the concept of channels or streams for which the number to use is
passed in the device tree. These streams are allocated to each of the
virtual cards.

As a side effect of this change, since each output is represented
independenly it's now very easy to use PulseAudio to control the
priorities of the outputs.

Testing:

Audacity and VLC were both loaded at the same time. Each application
was assigned to a different card. With this change I was able to play
different music files at the same time through the HDMI and Headphones
jacks and control the audio independently.

Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: bcm2835-audio: Align with parenthesis

Fix the checkpatch issue:
Alignment should match open parenthesis

Signed-off-by: Sreya Mittal <sreyamittal5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: replace printk(KERN_ERR...) with dev_err(...)

Use dev_err(... in place of printk(KERN_ERR ...
Problem found by checkpatch

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: remove extra blank line

Fix the warning: Blank lines aren't necessary after an open brace
'{' issued by checkpatch on bcm2835-ctl.c

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: use kernel preferred block commenting style

Fix block comment formatting to suppress the following warning thrown by
checkpatch: Block comments use a trailing */ on a separate line

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: move logical continuation to the same line

Keep logical continuations on the same line to improve code readability

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: remove space after cast

Remove instances of unnecessary blank space after cast in bcm2835-ctl.c

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Move driver under vc04_services

The bcm2835-audio driver is part of v04_services, so it makes
sense for it to be located under vc04_services to make
configuration clearer.

Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>