media: rkvdec: Hook the (TRY_)DECODER_CMD stateless ioctls

The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.

Add them to correctly support flushing.

Fixes: ed7bb87d3d03 ("media: rkvdec: Enable capture buffer holding for H264")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: increase max supported height for H.264

After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: staging: media: rkvdec: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: fix use after free bug in rkvdec_remove

In rkvdec_probe, rkvdec->watchdog_work is bound with
rkvdec_watchdog_func. Then rkvdec_vp9_run may
be called to start the work.

If we remove the module which will call rkvdec_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows, which will
cause a typical UAF bug.

Fix it by canceling the work before cleanup in rkvdec_remove.

CPU0 CPU1

|rkvdec_watchdog_func
rkvdec_remove |
rkvdec_v4l2_cleanup|
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: Enable capture buffer holding for H264

In order to support interlaced video decoding, the driver must
allow holding the capture buffer so that the second field can
be decoded into it.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: Ensure decoded resolution fit coded resolution

Ensure decoded CAPTURE buffer resolution is larger or equal to the coded
OUTPUT buffer resolution.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: Move H264 SPS validation in rkvdec-h264

No functional change, this moves H264 specific validation into the H264
specific code. This is in preparation of improving this validation and
reusing it when VIDIOC_STREAMON is called.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: Stop overclocking the decoder

While this overclock hack seems to work on some implementations
(some ChromeBooks, RockPi4) it also causes instability on other
implementations (notably LibreComputer Renegade, but there were more
reports in the LibreELEC project, where this has been removed). While
performance is indeed affected (tested with GStreamer), 4K playback
still works as long as you don't operate in lock step and keep at
least 1 frame ahead of time in the decode queue.

After discussion with ChromeOS members, it would seem that their
implementation indeed used to synchronously decode each frame, so
this hack was simply compensating for their code being less
efficient. In my opinion, this hack should not have been included
upstream.

Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: rkvdec: Constify static struct v4l2_m2m_ops

The only usage of rkvdec_m2m_ops is to pass its address to v4l2_m2m_init(),
which takes a pointer to const v4l2_m2m_ops as argument. Make it const
to allow the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Add the VP9 backend

The Rockchip VDEC supports VP9 profile 0 up to 4096x2304@30fps. Add
a backend for this new format.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Co-developed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Support dynamic resolution changes

The mem-to-mem stateless decoder API specifies support for dynamic
resolution changes. In particular, the decoder should accept format
changes on the OUTPUT queue even when buffers have been allocated,
as long as it is not streaming.

Relax restrictions for S_FMT as described in the previous paragraph,
and as long as the codec format remains the same. This aligns it with
the Hantro and Cedrus decoders. This change was mostly based on commit
ae02d49493b5 ("media: hantro: Fix s_fmt for dynamic resolution changes").

Since rkvdec_s_fmt() is now just a wrapper around the output/capture
variants without any additional shared functionality, drop the wrapper
and call the respective functions directly.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging: media: rkvdec: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Fix .buf_prepare

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in rkvdec-h264.c.

[Changed the comment and used V4L2_TYPE_IS_CAPTURE macro]

Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

staging: media: rkvdec: fix pm_runtime_get_sync() usage count

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Do not require all controls to be present in every request

According to the v4l2 api, it is allowed to skip
setting a control if its contents haven't changed for performance
reasons: userspace should only update the controls that changed from
last frame rather then updating them all. Still some ancient code
that checks for mandatory controls has been left in this driver.

Remove it.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Remove of_match_ptr()

When building with CONFIG_OF not set, the following clang
build warning is seen:

>> drivers/staging/media/rkvdec/rkvdec.c:967:34: warning: unused variable 'of_rkvdec_match' [-Wunused-const-variable]

Fix the warning by removing the unnecessary of_match_ptr().

Reported-by: kernel test robot <lkp@intel.com>
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging:rkvdec: Fixed "replace comma with semicolon" Warning

Corrected the following Warning:
drivers/staging/media/rkvdec/rkvdec.c:133: WARNING: Possible comma where semicolon could be used

Signed-off-by: Travis Carter <traviscarter2@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: uapi: move H264 stateless controls out of staging

The H.264 stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.

Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (h264-ctrls.h).

Now, the H264 stateless controls is ready to be part
of the stable uAPI.

While not too late, let's rename them and re-number their
control IDs, moving them to the newly created stateless
control class, and updating all the drivers accordingly.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: h264: Support profile and level controls

The Rockchip Video Decoder used in RK3399 supports H.264 profiles from
Baseline to High 4:2:2 up to Level 5.1, except for the Extended profile.

Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE and the
V4L2_CID_MPEG_VIDEO_H264_LEVEL control, so that userspace can query the
driver for the list of supported profiles and level.

For now, we don't expose 4:2:2 since the driver doesn't
implement the required support.

[Ezequiel: Don't expose 4:2:2 profile for now]

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Remove redundant platform_get_irq error message

platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Use H264_SCALING_MATRIX only when required

Baseline, Main and Extended profiles are specified to
not support a scaling matrix. Also, High profiles
can optionally specify a scaling matrix, using
SPS and PPS NAL units.

To meet this expectation, applications are required to
set the V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX control
and set the V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT
flag only when a scaling matrix is specified for a picture.

Implement this on rkvdec, which has hardware support for this
case.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Drop unneeded per_request driver-specific control flag

Currently, the drivers makes no distinction between per_request
and mandatory, as both are used in the same request validate check.

The driver only cares to know if a given control is
required to be part of a request, so only one flag is needed.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Don't require unneeded H264_SLICE_PARAMS

Now that slice invariant parameters have been moved,
the driver no longer needs this control, so drop it.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

rkvdec: h264: Refuse to decode unsupported bitstream

The hardware only supports 4:2:2, 4:2:0 or 4:0:0 (monochrome),
8-bit or 10-bit depth content.

Verify that the SPS refers to a supported bitstream, and refuse
unsupported bitstreams by failing at TRY_EXT_CTRLS time.

The driver is currently broken on 10-bit and 4:2:2
so disallow those as well.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: Add V4L2_TYPE_IS_CAPTURE helper

It's all too easy to get confused by the V4L2_TYPE_IS_OUTPUT
macro, when it's used as !V4L2_TYPE_IS_OUTPUT.

Reduce the risk of confusion with macro to explicitly
check for the CAPTURE queue type case.

This change does not affect functionality, and it's
only intended to make the code more readable.

Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: checkpatch: align with parenthesis]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: rkvdec: Add the rkvdec driver

The rockchip vdec block is a stateless decoder that's able to decode
H264, HEVC and VP9 content. This commit adds the core infrastructure
and the H264 backend. Support for VP9 and HEVS will be added later on.

[mchehab+huawei@kernel.org: select MEDIA_CONTROLLER and REQUEST_API]
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>