media: staging: ipu3-imgu: Initialise height_per_slice in the stripes

While playing with low resolutions for the grid, it appeared that
height_per_slice is not initialised if we are not using both stripes for
the calculations. This pattern occurs three times:
- for the awb_fr processing block
- for the af processing block
- for the awb processing block

The idea of this small portion of code is to reduce complexity in
loading the statistics, it could be done also when only one stripe is
used. Fix it by getting this initialisation code outside of the else()
test case.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: staging: media: ipu3: Fix AWB x_start position when rightmost stripe is used

An not calibrated x_start setting would result in an incorrect AWB grid
configuration on a sensor when only the rightmost stripe is used.

If the AWB grid coordinate is set to the rightmost stripe, for example,
x_start is greater than 640, the AWB grid will be at the rightmost edge of
the sensor. The AWB statistic will be fetched from the wrong place of the
sensor and results in an incorrect AWB estimation result. Therefore,
stripe offset should subtract from x_start to have a correct grid
configuration for the rightmost stripe.

Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: staging: media: ipu3: Fix AF x_start position when rightmost stripe is used

For the AF configuration, if the rightmost stripe is used, the AF scene
will be at the incorrect location of the sensor.

The AF coordinate may be set to the right part of the sensor. This
configuration would lead to x_start being greater than the
down_scaled_stripes offset and the leftmost stripe would be disabled
and only the rightmost stripe is used to control the AF coordinate. If
the x_start doesn't perform any adjustments, the AF coordinate will be
at the wrong place of the sensor since down_scaled_stripes offset
would be the new zero of the coordinate system.

In this patch, if only the rightmost stripe is used, x_start should
minus down_scaled_stripes offset to maintain its correctness of AF
scene coordinate.

Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3: drop an unused variable

Fix this clang Werror with W=1:

drivers/staging/media/ipu3/ipu3-css-params.c:774:8: error: variable 'pin_scale' set but not used [-Werror,-Wunused-but-set-variable]
int pin_scale = 0;
^

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/intel-ipu3: css: Correctly reset some memory

The intent here is to reset the whole 'scaler_coeffs_luma' array, not just
the first element.

Fixes: e11110a5b744 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: staging/intel-ipu3: css: simplify expression

An array index computed inside square brackets complicates the code
and also extends the line beyond 80 character. Add new variable to
compute array index separately and use it as an index during assignment.

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

media: ipu3-imgu: Prefix functions with imgu_* instead of ipu3_*

This addresses the below TODO item, no function related changes:

- Prefix imgu for all public APIs, i.e. change ipu3_v4l2_register() to
imgu_v4l2_register(). (Sakari)

The changes were obtained by applying the following perl script
to driver code under drivers/staging/media/ipu3/.

perl -pi.back -e 's/ipu3_(?!uapi)/imgu_/g;'

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

ipu3: add missing #include

Lots of warning due to non-static functions are generated because
the headers with define them were not included.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: staging/intel-ipu3: Add dual pipe support

This patch adds support to run dual pipes simultaneously.
A private ioctl to configure the pipe mode (video or still)
is also implemented.

IPU3 hardware supports a maximum of 2 streams per pipe.
With the support of dual pipes, more than 2 stream outputs
can be achieved.

This helps to support advanced camera features like
Continuous View Finder (CVF) and Snapshot During Video(SDV).

Extend ipu3 IMGU driver to support dual pipes

1. Extend current IMGU device to contain 2 groups
of video nodes and 2 subdevs
2. Extend current css to support 2 pipeline and make
CSS APIs to support 2 pipe
3. Add a v4l2 ctrl to allow user to specify the mode
of the pipe
4. Check media pipeline link status to get enabled
pipes

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Tian Shu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: staging/intel-ipu3: css: Compute and program ccs

A collection of routines that are mainly used
to calculate the parameters for accelerator cluster.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>