#
45d95911 |
|
07-Aug-2023 |
Yang Yingliang <yangyingliang@huawei.com> |
spi: falcon: switch to use modern name Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-5-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
7a2b552c |
|
10-Jul-2023 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
spi: Convert to SPI_CONTROLLER_HALF_DUPLEX Convert the users under SPI subsystem to SPI_CONTROLLER_HALF_DUPLEX. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230710154932.68377-15-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
9e264f3f |
|
10-Mar-2023 |
Amit Kumar Mahapatra via Alsa-devel <alsa-devel@alsa-project.org> |
spi: Replace all spi->chip_select and spi->cs_gpiod references with function call Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers Reviewed-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
a886010c |
|
08-Mar-2021 |
Alexandru Ardelean <aardelean@deviqon.com> |
spi: spi-falcon: remove check for 'delay_usecs' The 'delay_usecs' field is being removed from the spi_transfer struct. This change removes it from the SPI Falcon driver. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-8-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
3e2405f0 |
|
26-Sep-2019 |
Alexandru Ardelean <alexandru.ardelean@analog.com> |
spi: spi-falcon: extend warning to `delay` as well The WARN_ON macro prints a warning in syslog if `delay_usecs` is non-zero. However, with the new intermediate `delay`, the warning should also be printed. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-18-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
d2912cb1 |
|
04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
1a41aa13 |
|
19-Aug-2017 |
Hauke Mehrtens <hauke@hauke-m.de> |
spi: spi-falcon: drop check of boot select Do not check which flash type the SoC was booted from before using this driver. Assume that the device tree is correct and use this driver when it was added to device tree. This also removes a build dependency to the SoC code. All device trees I am aware of only have one correct flash device entry in it. The device tree is anyway bundled with the kernel in all systems using device tree I know of. The boot mode can be specified with some pin straps and will select the flash type the rom code will boot from. One SPI, NOR or NAND flash chip can be connect to the EBU and used to load the first stage boot loader from. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
7f6d62a2 |
|
09-Dec-2014 |
Mark Brown <broonie@kernel.org> |
spi/falcon: Remove hardware prepare and unprepare functions They are completely empty and therefore serve no function. Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
14ac00e0 |
|
20-Oct-2014 |
Wolfram Sang <wsa@kernel.org> |
spi: drop owner assignment from platform_drivers A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
#
43e48cc3 |
|
04-Jun-2014 |
Alexander Shiyan <shc_work@mail.ru> |
spi: falcon: Remove unnecessary platform_set_drvdata() Drop call to platform_set_drvdata() as driver data is not used anywhere in the driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
e4745fef |
|
27-Mar-2014 |
Axel Lin <axel.lin@ingics.com> |
spi: Remove unneeded include of linux/workqueue.h Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
78e39523 |
|
11-Feb-2014 |
Axel Lin <axel.lin@ingics.com> |
spi: Remove explictly set bus_num and num_chipselect to default setting The purpose of commit 1e8a52e18cfb "spi: By default setup spi_masters with 1 chipselect and dynamics bus number" is to avoid setting default value for bus_num and num_chipselect in spi master drivers. So let's remove the duplicate code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-By: David Daney <david.daney@cavium.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
354312f1 |
|
11-Feb-2014 |
Axel Lin <axel.lin@ingics.com> |
spi: Remove duplicate code to check chip_select In spi_add_device(), we have the code to validate spi->chip_select. So remove the duplicate code in various drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
999b6e93 |
|
03-Dec-2013 |
Jingoo Han <jg1.han@samsung.com> |
spi: falcon: Use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
ec3eaeca |
|
30-Jan-2013 |
John Crispin <blogic@openwrt.org> |
spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag Due to hardware limitations of the spi/flash frontend of the EBU we need to set the SPI_MASTER_HALF_DUPLEX flag. Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
737a7c43 |
|
30-Jan-2013 |
John Crispin <blogic@openwrt.org> |
spi/mips-lantiq: make use of spi_finalize_current_message Rather than calling m->complete() directly we choose the sane way and call spi_finalize_current_message instead. Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
fd4a319b |
|
07-Dec-2012 |
Grant Likely <grant.likely@secretlab.ca> |
spi: Remove HOTPLUG section attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
6cd3c7e2 |
|
20-May-2012 |
Thomas Langer <thomas.langer@lantiq.com> |
SPI: MIPS: lantiq: add FALCON spi driver The external bus unit (EBU) found on the FALCON SoC has spi emulation that is designed for serial flash access. This driver has only been tested with m25p80 type chips. The hardware has no support for other types of spi peripherals. Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Cc: spi-devel-general@lists.sourceforge.net Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|