soc/fsl/qe: fix usb.c build errors

Fix build errors in soc/fsl/qe/usb.c when QUICC_ENGINE is not set.
This happens when PPC_EP88XC is set, which selects CPM1 & CPM.
When CPM is set, USB_FSL_QE can be set without QUICC_ENGINE
being set. When USB_FSL_QE is set, QE_USB deafults to y, which
causes build errors when QUICC_ENGINE is not set. Making
QE_USB depend on QUICC_ENGINE prevents QE_USB from defaulting to y.

Fixes these build errors:

drivers/soc/fsl/qe/usb.o: in function `qe_usb_clock_set':
usb.c:(.text+0x1e): undefined reference to `qe_immr'
powerpc-linux-ld: usb.c:(.text+0x2a): undefined reference to `qe_immr'
powerpc-linux-ld: usb.c:(.text+0xbc): undefined reference to `qe_setbrg'
powerpc-linux-ld: usb.c:(.text+0xca): undefined reference to `cmxgcr_lock'
powerpc-linux-ld: usb.c:(.text+0xce): undefined reference to `cmxgcr_lock'

Fixes: 5e41486c408e ("powerpc/QE: add support for QE USB clocks routing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301101500.pillNv6R-lkp@intel.com/
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Leo Li <leoyang.li@nxp.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Nicolas Schier <nicolas@jasle.eu>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST

In order to compile tsa.c and qmc.c, CONFIG_CPM must be set.

Without this dependency, the linker fails with some missing
symbols for COMPILE_TEST configurations that need QMC without
enabling CPM.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305160221.9XgweObz-lkp@intel.com/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20230523085902.75837-2-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: fsl: cpm1: qmc: Fix test dependency

The QMC depends on (SOC_FSL && COMPILE_TEST). SOC_FSL does not exist.

Fix the dependency using the correct one: FSL_SOC.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230314082157.137176-1-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: fsl: cpm1: Add support for QMC

The QMC (QUICC Multichannel Controller) emulates up to 64
channels within one serial controller using the same TDM
physical interface routed from the TSA.

It is available in some PowerQUICC SoC such as the
MPC885 or MPC866.

It is also available on some Quicc Engine SoCs.
This current version support CPM1 SoCs only and some
enhancement are needed to support Quicc Engine SoCs.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-7-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: fsl: cpm1: Add support for TSA

The TSA (Time Slot Assigner) purpose is to route some
TDM time-slots to other internal serial controllers.

It is available in some PowerQUICC SoC such as the
MPC885 or MPC866.

It is also available on some Quicc Engine SoCs.
This current version support CPM1 SoCs only and some
enhancement are needed to support Quicc Engine SoCs.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE

There are also PPC64, ARM and ARM64 based SOCs with a QUICC Engine,
and the core QE code as well as net/wan/fsl_ucc_hdlc and
tty/serial/ucc_uart has now been modified to not rely on ppcisms.

So extend the architectures that can select QUICC_ENGINE, and add the
rather modest requirements of OF && HAS_IOMEM.

The core code as well as the ucc_uart driver has been tested on an
LS1021A (arm), and it has also been tested that the QE code still
works on an mpc8309 (ppc). Qiang Zhao has tested that the QE-HDLC code
that gets enabled with this works on ARM64.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: fsl: cleanup Kconfig menu

Put NXP/Freescale QorIQ SoC drivers under a menu and make the item
naming more aligned.

Signed-off-by: Li Yang <leoyang.li@nxp.com>

fsl/qe: Add QE TDM lib

QE has module to support TDM, some other protocols
supported by QE are based on TDM.
add a qe-tdm lib, this lib provides functions to the protocols
using TDM to configurate QE-TDM.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QE: Move QE from arch/powerpc to drivers/soc

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>