scsi: qla2xxx: Correct endianness for rqstlen and rsplen

rqstlen and rsplen were changed to __le32 to fix sparse warnings:

drivers/scsi/qla2xxx/qla_nvme.c:402:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:402:30: expected restricted __le32 [usertype] cmd_len
drivers/scsi/qla2xxx/qla_nvme.c:402:30: got unsigned short [usertype] rsplen
drivers/scsi/qla2xxx/qla_nvme.c:507:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:507:30: expected restricted __le32 [usertype] cmd_len
drivers/scsi/qla2xxx/qla_nvme.c:507:30: got unsigned int [usertype] rqstlen
drivers/scsi/qla2xxx/qla_nvme.c:508:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:508:30: expected restricted __le32 [usertype] rsp_len
drivers/scsi/qla2xxx/qla_nvme.c:508:30: got unsigned int [usertype] rsplen

Correct the endianness in qla2xxx driver thus avoiding changes in
nvme-fc-driver.h.

Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230831112146.32595-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()

When CONFIG_NVME_FC is not set, fcport is unused:

drivers/scsi/qla2xxx/qla_nvme.c: In function 'qla2xxx_process_purls_pkt':
drivers/scsi/qla2xxx/qla_nvme.c:1183:20: warning: unused variable 'fcport' [-Wunused-variable]
1183 | fc_port_t *fcport = uctx->fcport;
| ^~~~~~

While this preprocessor usage could be converted to a normal if
statement to allow the compiler to always see fcport as used, it is
equally easy to just eliminate the fcport variable and use uctx->fcport
directly.

Fixes: 27177862de96 ("scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20230828131304.269a2a40@canb.auug.org.au/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308290833.sKkoSSeO-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230829-qla_nvme-fix-unused-fcport-v1-1-51c7560ecaee@kernel.org
Acked-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"

There is a spelling mistake in a ql_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230828213101.758609-1-colin.i.king@gmail.com
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error

The kernel robot reported below build error,

>> ERROR: modpost: "nvme_fc_rcv_ls_req" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined!

Use CONFIG_NVME_FC enabled check to fix the build error.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308021445.txlNq7UC-lkp@intel.com/
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230824151521.35261-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe

Introduce infrastructure in the driver to support the processing of
unsolicited LS (Link Service) requests. This will involve the utilization
of a new pass-up of unsolicited FC-NVMe request IOCB interface. Unsolicited
requests will be submitted to the NVMe transport layer through
nvme_fc_rcv_ls_req(). Any received LS responses, which are sent using
xmt_ls_rsp(), will be forwarded to the firmware through the existing
Pass-Through IOCB interface, responsible for sending FC-NVMe Link Service
requests and responses.

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Turn off noisy message log

Some consider noisy log as test failure. Turn off noisy message log.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Adjust IOCB resource on qpair create

During NVMe queue creation, a new qpair is created. FW resource limit needs
to be re-adjusted to take into account the new qpair. Otherwise, NVMe
command can not go through. This issue was discovered while
testing/forcing FW execution to fail at load time.

Add call to readjust IOCB and exchange limit.

In addition, get FW state command and require FW to be running. Otherwise,
error is generated.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue

System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up
gets called for uninitialized wait queue sp->nvme_ls_waitq.

qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0
qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
RIP: 0010:__wake_up_common+0x4c/0x190
RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
__wake_up_common_lock+0x7c/0xc0
qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]

Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed
previously in the commits tagged Fixed: below.

Fixes: 219d27d7147e ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands")
Fixes: 5621b0dd7453 ("scsi: qla2xxx: Simpify unregistration of FC-NVMe local/remote ports")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230615074633.12721-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called

In current I/O path, Tx and Rx may not be processed on same CPU. This may
lead to thrashing and optimum performance may not be achieved.

Pick qpair such that Tx and Rx are processed on same CPU.

Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix exchange oversubscription

In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.

Check for exchange availability before command submission.

Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests

The following message and call trace was seen with debug kernels:

DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990

Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]

Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.

Fixes: c85ab7d9e27a ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

block: Change the return type of blk_mq_map_queues() into void

Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"

This fixes the regression of NVMe discovery failure during driver load
time.

This reverts commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99.

Link: https://lore.kernel.org/r/20220713052045.10683-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Increase max limit of ql2xnvme_queues

Increase max limit of ql2xnvme_queues to (max_qpair - 1).

Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com
Fixes: 65120de26a54 ("scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests

At NVMe ELS request time, request structure is DMA mapped and never
unmapped. Fix this by calling the unmap on ELS completion.

Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix loss of NVMe namespaces after driver reload test

Driver registration of localport can race when it happens at the remote
port discovery time. Fix this by calling the registration under a mutex.

Link: https://lore.kernel.org/r/20220310092604.22950-4-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix disk failure to rediscover

User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.

Set the online state before reporting of the availability of the session.

Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com
Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues

Add ql2xnvme_queues module parameter to configure number of NVMe queues

Usage:

Number of NVMe Queues that can be configured.

Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues),

1 - Minimum number of queues supported
8 - Default value
128 - Maximum number of queues supported

Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Synchronize rport dev_loss_tmo setting

Currently, the dev_loss_tmo setting is only ever used for SCSI
devices. This patch reshuffles initialisation such that the SCSI remote
ports are registered before the NVMe ones, allowing the dev_loss_tmo
setting to be synchronized between SCSI and NVMe.

Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Call process_response_queue() in Tx path

Process responses in Tx path if any available for better performance.

Link: https://lore.kernel.org/r/20210908164622.19240-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix crash in NVMe abort path

System crash was seen when I/O was run against an NVMe target and aborts
were occurring.

Crash stack is:

-- relevant crash stack --
BUG: kernel NULL pointer dereference, address: 0000000000000010
:
#6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e
[exception RIP: qla_nvme_abort_work+339]
RIP: ffffffffc0f592e3 RSP: ffffae1f8666be80 RFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff9b581fc8af80 RCX: ffffffffc0f83bd0
RDX: 0000000000000001 RSI: ffff9b5839c6c7c8 RDI: 0000000008000000
RBP: ffff9b6832f85000 R8: ffffffffc0f68160 R9: ffffffffc0f70652
R10: ffffae1f862ffdc8 R11: 0000000000000300 R12: 000000000000010d
R13: 0000000000000000 R14: ffff9b5839cea000 R15: 0ffff9b583fab170
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184
#8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d
#9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed

The crash was due to a stale SRB structure access after it was aborted.
Fix the issue by removing stale access.

Link: https://lore.kernel.org/r/20210908164622.19240-5-njavali@marvell.com
Fixes: 2cabf10dbbe3 ("scsi: qla2xxx: Fix hang on NVMe command timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: add ->map_queues support for nvme

Implement ->map queues and use the block layer blk_mq_pci_map_queues
helper for mapping queues to CPUs.

With this mapping minimum 10%+ increase in performance is noticed.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: qla2xxx: Fix hang on NVMe command timeouts

The abort callback gets called only when it gets posted to firmware. The
refcounting is done properly in the callback. On internal errors, the
callback is not invoked leading to a hung I/O. Fix this by having separate
error code when command gets returned from firmware.

Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix hang during NVMe session tear down

The following hung task call trace was seen:

[ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds.
[ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000
[ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx]
[ 1230.205639] Call Trace:
[ 1230.208100] __schedule+0x2c4/0x700
[ 1230.211607] schedule+0x38/0xa0
[ 1230.214769] schedule_timeout+0x246/0x2f0
[ 1230.222651] wait_for_completion+0x97/0x100
[ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx]
[ 1230.232254] process_one_work+0x1a7/0x360

...when device side port resets were done.

Abort threads were getting out without processing due to the "deleted"
flag check. The delete thread, meanwhile, could not proceed with a
logout (that would have cleared out pending requests) as the logout IOCB
work was not progressing. It appears like the hung qlt_free_session_done()
thread is causing the ha->wq works on hold. The qlt_free_session_done()
was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb
to be complete, which would only happen when all I/Os are released.

Fix this by allowing abort to progress until device delete is completely
done. This should make the qlt_free_session_done() proceed without hang and
thus clear up the deadlock.

Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.

An index of queue_pair_map also gets set to 0.

qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);

set_bit(qpair_id, ha->qpair_qid_map);
ha->queue_pair_map[qpair_id] = qpair;

In the alloc_queue callback driver checks the map, if queue is already
allocated:

ha->queue_pair_map[qidx]

This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.

[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503] ? check_preempt_curr+0x62/0x90
[ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515] ? __switch_to_asm+0x35/0x70
[ 1572.354516] ? __switch_to_asm+0x41/0x70
[ 1572.354518] ? __switch_to_asm+0x35/0x70
[ 1572.354519] ? __switch_to_asm+0x41/0x70
[ 1572.354521] ? __switch_to_asm+0x35/0x70
[ 1572.354522] ? __switch_to_asm+0x41/0x70
[ 1572.354523] ? __switch_to_asm+0x35/0x70
[ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527] ? __switch_to_asm+0x41/0x70
[ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535] ? process_one_work+0x1a7/0x360
[ 1572.354537] ? create_worker+0x1a0/0x1a0
[ 1572.354538] ? worker_thread+0x30/0x390
[ 1572.354540] ? create_worker+0x1a0/0x1a0
[ 1572.354541] ? kthread+0x116/0x130
[ 1572.354543] ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545] ? ret_from_fork+0x35/0x40

Fix is to use index 0 for admin and first IO queue.

Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS

The MSI-X and MSI calls fails in kdump kernel. Because of this
qla2xxx_create_qpair() fails leading to .create_queue callback failure.
The fix is to return existing qpair instead of allocating new one and
allocate a single hw queue.

[ 19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support,
giving up -- 16/-28.
[ 19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode --
ret=-28.
[ 19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode --
ret=-28.
..
..
..
[ 21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle
00000000e7ee499d, idx =1, qsize 32
[ 21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable.
[ 21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair
[ 21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22)
[ 21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds

Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: edif: Add encryption to I/O path

Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.

After the completion of PLOGI, both sides have authenticated and PRLI
completed, encrypted I/Os are allowed to proceed.

- Use new firmware API to encrypt traffic on the wire

- Add driver parameter to enable|disable EDIF feature

# modprobe qla2xxx ql2xsecenable=1

Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add heartbeat check

Use "no-op" mailbox command to check if the adapter firmware is still
responsive.

Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Log PCI address in qla_nvme_unregister_remote_port()

Pass in fcport->vha to ql_log() in order to add the PCI address to the log.

Currently NULL is passed in which gives this confusing log entry:

> qla2xxx [0000:00:00.0]-2112: : qla_nvme_unregister_remote_port: unregister remoteport on 0000000009d6a2e9 50000973981648c7

Link: https://lore.kernel.org/r/20210531122444.116655-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix crash in PCIe error handling

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1715 Comm: kworker/0:2
Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5
Hardware name: HPE Superdome Flex/Superdome Flex, BIOS
Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020
Workqueue: events aer_recover_work_func
task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000
RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx]
RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000
RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8
RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000
R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000
R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0
FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx]
report_slot_reset+0x41/0x80
? merge_result.part.4+0x30/0x30
pci_walk_bus+0x70/0x90
pcie_do_recovery+0x1db/0x2e0
aer_recover_work_func+0xc2/0xf0
process_one_work+0x14c/0x390

Disable board_disable logic where driver resources are freed while OS is in
the process of recovering the adapter.

Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Simplify the calculation of variables

Fix the following coccicheck warnings:

./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is
equivalent to !A || B.

Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Wait for ABTS response on I/O timeouts for NVMe

FW needs to wait for an ABTS response before completing the I/O.

Link: https://lore.kernel.org/r/20210111093134.1206-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Handle aborts correctly for port undergoing deletion

Call trace observed while shutting down the adapter ports (LINK DOWN).
Handle aborts correctly.

localhost kernel: INFO: task nvme:44209 blocked for more than 120 seconds.
localhost kernel: "echo 0 >/proc/sys/kernel/hung_task_timeout_secs" disables this message.
localhost kernel: nvme D ffff88b45fb5acc0 0 44209 1 0x00000080
localhost kernel: Call Trace:
localhost kernel: [<ffffffffbd187169>] schedule+0x29/0x70
localhost kernel: [<ffffffffbd184c51>] schedule_timeout+0x221/0x2d0
localhost kernel: [<ffffffffbcad7229>] ? ttwu_do_wakeup+0x19/0xe0
localhost kernel: [<ffffffffbcad735f>] ? ttwu_do_activate+0x6f/0x80
localhost kernel: [<ffffffffbcada830>] ? try_to_wake_up+0x190/0x390
localhost kernel: [<ffffffffbd18751d>] wait_for_completion+0xfd/0x140
localhost kernel: [<ffffffffbcadaaf0>] ? wake_up_state+0x20/0x20
localhost kernel: [<ffffffffbcabe3da>] flush_work+0x10a/0x1b0
localhost kernel: [<ffffffffbcabb0f0>] ? move_linked_works+0x90/0x90
localhost kernel: [<ffffffffbcabe6cf>] flush_delayed_work+0x3f/0x50
localhost kernel: [<ffffffffc0452767>] nvme_fc_init_ctrl+0x657/0x6a0 [nvme_fc]
localhost kernel: [<ffffffffc045293a>] nvme_fc_create_ctrl+0x18a/0x210 [nvme_fc]
localhost kernel: [<ffffffffc028962f>] nvmf_dev_write+0x98f/0xb35 [nvme_fabrics]
localhost kernel: [<ffffffffbcd08927>] ? security_file_permission+0x27/0xa0
localhost kernel: [<ffffffffbcc4db50>] vfs_write+0xc0/0x1f0
localhost kernel: [<ffffffffbcc4e92f>] SyS_write+0x7f/0xf0
localhost kernel: [<ffffffffbd193f92>] system_call_fastpath+0x25/0x2a

Link: https://lore.kernel.org/r/20201202132312.19966-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Don't check for fw_started while posting NVMe command

NVMe commands can come only after successful addition of rport and NVMe
connect, and rport is only registered after FW started bit is set. Remove
the redundant check.

Link: https://lore.kernel.org/r/20201202132312.19966-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Return EBUSY on fcport deletion

When the fcport is about to be deleted we should return EBUSY instead of
ENODEV. Only for EBUSY will the request be requeued in a multipath setup.

Also return EBUSY when the firmware has not yet started to avoid dropping
the request.

Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de
Link: https://lore.kernel.org/r/20201202132312.19966-2-njavali@marvell.com
Reviewed-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Return EBUSY on fcport deletion

When the fcport is about to be deleted we should return EBUSY instead of
ENODEV. Only for EBUSY will the request be requeued in a multipath setup.

Also return EBUSY when the firmware has not yet started to avoid dropping
the request.

Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix return of uninitialized value in rval

A previous change removed the initialization of rval and there is now an
error where an uninitialized rval is being returned on an error return
path. Fix this by returning -ENODEV.

Link: https://lore.kernel.org/r/20201008183239.200358-1-colin.king@canonical.com
Fixes: b994718760fa ("scsi: qla2xxx: Use constant when it is known")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Uninitialized scalar variable")

scsi: qla2xxx: Use constant when it is known

Directly return constant when it is known to make code easier to
understand.

Link: https://lore.kernel.org/r/20200921112340.GA19336@duo.ucw.cz
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add SLER and PI control support

BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15
of special feature control block for enabling SLER in FW. Set bit 8 (SLER
supported) to 1 for the service parameter information when sending NVMe
PRLI request. Set BIT_14 of special feature control block for enabling PI
Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the
service parameter information when sending NVMe PRLI request. Set BIT_13
for NVMe Async events.

Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix I/O errors during LIP reset tests

In .fcp_io(), returning ENODEV as soon as remote port delete has started
can cause I/O errors. Fix this by returning EBUSY until the remote port
delete finishes.

Link: https://lore.kernel.org/r/20200904045128.23631-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Performance tweak

Move statistics fields from vha struct to qpair to reduce memory thrashing.

Link: https://lore.kernel.org/r/20200904045128.23631-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix I/O failures during remote port toggle testing

Driver was using a lower value for dev_loss_tmo making it more prone to I/O
failures during remote port toggle testing. Set dev_loss_tmo to zero during
remote port registration to allow nvme-fc default dev_loss_tmo to be used,
which is higher than what driver was using.

Link: https://lore.kernel.org/r/20200904045128.23631-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi/qla2xxx: Convert to SPDX license identifiers

All files in this driver directory contain the following notice:

See LICENSE.qla2xxx for copyright and licensing details.

LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains:

- A copyright notice

This copyright notice is redundant as all files contain the same
copyright notice already

- A license notice

You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).

This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.

- The full GPLv2 license text

A redundant copy of LICENSES/preferred/GPL-2.0

Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.

Finally remove the now redundant LICENSE.qla2xxx file.

Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()

On an error exit path, a negative error code should be returned instead of
a positive return value.

Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com
Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix null pointer access during disconnect from subsystem

NVMEAsync command is being submitted to QLA while the same NVMe controller
is in the middle of reset. The reset path has deleted the association and
freed aen_op->fcp_req.private. Add a check for this private pointer before
issuing the command.

...
6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e
[exception RIP: qla_nvme_post_cmd+394]
RIP: ffffffffc0d012ba RSP: ffffb656ca11fd98 RFLAGS: 00010206
RAX: ffff8fb039eda228 RBX: ffff8fb039eda200 RCX: 00000000000da161
RDX: ffffffffc0d4d0f0 RSI: ffffffffc0d26c9b RDI: ffff8fb039eda220
RBP: 0000000000000013 R8: ffff8fb47ff6aa80 R9: 0000000000000002
R10: 0000000000000000 R11: ffffb656ca11fdc8 R12: ffff8fb27d04a3b0
R13: ffff8fc46dd98a58 R14: 0000000000000000 R15: ffff8fc4540f0000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc]
8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc]
9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core]
10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437
11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef
12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402
13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255

--
PID: 37824 TASK: ffff8fb033063d80 CPU: 20 COMMAND: "kworker/u97:451"
0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3
1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8
2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed
3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf
4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5
5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core]
6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc]
7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437
8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50
9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402
10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255

Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba

qla_nvme_register_hba() puts out a warning when there are not enough queue
pairs available for FC-NVME. Just fail the NVME registration rather than a
WARNING + call Trace.

Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request

The qla2xxx driver knows when request was processed successfully or
not. But it always sets the NVMe status code to 0/NVME_SC_SUCCESS. The
upper layer needs to figure out from the rcv_rsplen and transferred_length
variables if the request was transferred successfully. This is not always
possible, e.g. when the request data length is 0, the transferred_length is
also set 0 which is interpreted as success in nvme_fc_fcpio_done(). Let's
inform the upper layer (nvme_fc_fcpio_done()) when something went wrong.

nvme_fc_fcpio_done() maps all non-NVME_SC_SUCCESS status codes to
NVME_SC_HOST_PATH_ERROR. There isn't any benefit to map the QLA status code
to the NVMe status code. Therefore, use NVME_SC_INTERNAL to indicate an
error which aligns it with the lpfc driver.

Link: https://lore.kernel.org/r/20200604100745.89250-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix endianness annotations in source files

Fix all endianness complaints reported by sparse (C=2) without affecting
the behavior of the code on little endian CPUs.

Link: https://lore.kernel.org/r/20200518211712.11395-16-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Cast explicitly to uint16_t / uint32_t

Casting a pointer to void * and relying on an implicit cast from void *
to uint16_t or uint32_t suppresses sparse warnings about endianness. Hence
cast explicitly to uint16_t and uint32_t. Additionally, remove superfluous
void * casts.

Link: https://lore.kernel.org/r/20200518211712.11395-13-bvanassche@acm.org
Cc: Arun Easi <aeasi@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into lower case

This was suggested by Daniel Wagner.

Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

nvme-fc: Revert "add module to ops template to allow module references"

The original patch was to resolve the lldd being able to be unloaded
while being used to talk to the boot device of the system. However, the
end result of the original patch is that any driver unload while a nvme
controller is live via the lldd is now being prohibited. Given the module
reference, the module teardown routine can't be called, thus there's no
way, other than manual actions to terminate the controllers.

Fixes: 863fbae929c7 ("nvme_fc: add module to ops template to allow module references")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: qla2xxx: Convert MAKE_HANDLE() from a define into an inline function

This patch allows sparse to verify the endianness of the arguments passed
to make_handle().

Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

nvme_fc: add module to ops template to allow module references

In nvme-fc: it's possible to have connected active controllers
and as no references are taken on the LLDD, the LLDD can be
unloaded. The controller would enter a reconnect state and as
long as the LLDD resumed within the reconnect timeout, the
controller would resume. But if a namespace on the controller
is the root device, allowing the driver to unload can be problematic.
To reload the driver, it may require new io to the boot device,
and as it's no longer connected we get into a catch-22 that
eventually fails, and the system locks up.

Fix this issue by taking a module reference for every connected
controller (which is what the core layer did to the transport
module). Reference is cleared when the controller is removed.

Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

scsi: qla2xxx: Fix double scsi_done for abort path

Current code assumes abort will remove the original command from the active
list where scsi_done will not be called. Instead, the eh_abort thread will
do the scsi_done. That is not the case. Instead, we have a double
scsi_done calls triggering use after free.

Abort will tell FW to release the command from FW possesion. The original
command will return to ULP with error in its normal fashion via scsi_done.
eh_abort path would wait for the original command completion before
returning. eh_abort path will not perform the scsi_done call.

Fixes: 219d27d7147e0 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands")
Cc: stable@vger.kernel.org # 5.2
Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Introduce qla2xxx_get_next_handle()

This patch reduces code duplication.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Enable type checking for the SRB free and done callback functions

Since all pointers passed to the srb_t.done() and srb_t.free() functions
have type srb_t, change the type of the first argument of these functions
from void * into struct srb *. This allows the compiler to verify the
argument types for these functions. This patch does not change any
functionality.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove a superfluous pointer check

Checking a pointer after it has been dereferenced is not useful. This was
detected by Coverity.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Improve Linux kernel coding style conformance

Insert a space where required, surround complex expressions in macros with
parentheses, use the UL suffix instead of the (unsigned long) cast, do not
use line continuations when not necessary and do not explicitly initialize
static variables to zero.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Allow NVMe IO to resume with short cable pull

Current driver report dev_loss_tmo to 0 for NVMe devices with short cable
pull. This causes NVMe controller to be freed along with NVMe namespace.
The side affect is IO would stop. By not setting dev_loss_tmo to 0, NVMe
namespace would stay until cable is plugged back in. This allows IO to
resume afterward.

[mkp: commit desc]

Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: move IO flush to the front of NVME rport unregistration

On session deletion, current qla code would unregister an NVMe session
before flushing IOs. This patch would move the unregistration of NVMe
session after IO flush. This way FC-NVMe layer would not have to wait for
stuck IOs. In addition, qla2xxx would stop accepting new IOs during session
deletion.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition

This patch uses kref to protect access between fcp_abort path and nvme
command and LS command completion path. Stack trace below shows the abort
path is accessing stale memory (nvme_private->sp).

When command kref reaches 0, nvme_private & srb resource will be
disconnected from each other. Any subsequence nvme abort request will not
be able to reference the original srb.

[ 5631.003998] BUG: unable to handle kernel paging request at 00000010000005d8
[ 5631.004016] IP: [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx]
[ 5631.004086] Workqueue: events qla_nvme_abort_work [qla2xxx]
[ 5631.004097] RIP: 0010:[<ffffffffc087df92>] [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx]
[ 5631.004109] Call Trace:
[ 5631.004115] [<ffffffffaa4b8174>] ? pwq_dec_nr_in_flight+0x64/0xb0
[ 5631.004117] [<ffffffffaa4b9d4f>] process_one_work+0x17f/0x440
[ 5631.004120] [<ffffffffaa4bade6>] worker_thread+0x126/0x3c0

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: on session delete, return nvme cmd

- on session delete or chip reset, reject all NVME commands.

- on NVME command submission error, free srb resource.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx]
PGD 800000084cf41067 PUD 84d288067 PMD 0
Oops: 0000 [#1] SMP
Call Trace:
[<ffffffff98abcfdf>] process_one_work+0x17f/0x440
[<ffffffff98abdca6>] worker_thread+0x126/0x3c0
[<ffffffff98abdb80>] ? manage_workers.isra.26+0x2a0/0x2a0
[<ffffffff98ac4f81>] kthread+0xd1/0xe0
[<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40
[<ffffffff9918ad37>] ret_from_fork_nospec_begin+0x21/0x21
[<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40
RIP [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx]

The crash is due to a bad entry in the nvme_rport_list. This list is not
protected, and when a remoteport_delete callback is called, driver
traverses the list and crashes.

Actually, the list could be removed and driver could traverse the main
fcport list instead. Fix does exactly that.

Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Complain loudly about reference count underflow

A reference count underflow is a severe bug. Hence complain loudly if a
reference count underflow happens.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware

This patch makes the code easier to read and more compact.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures

Introduce two structures for the (DMA address, length) combination instead
of using separate structure members for the DMA address and length. This
patch fixes several Coverity complaints about 'cur_dsd' being used to write
outside the bounds of structure members.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands

In the *_done() functions, instead of returning early if sp->ref_count >=
2, only decrement sp->ref_count. In qla2xxx_eh_abort(), instead of deciding
what to do based on the value of sp->ref_count, decide which action to take
depending on the completion status of the firmware abort. Remove srb.cwaitq
and use srb.comp instead. In qla2x00_abort_srb(), call
isp_ops->abort_command() directly instead of calling qla2xxx_eh_abort().

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove the fcport test from qla_nvme_abort_work()

Testing whether a pointer is not NULL after it has been dereferenced is not
useful. Hence remove the if (fcport) test. This was detected by Coverity.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Leave a blank line after declarations

This patch improves readability of the qla2xxx source code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use get/put_unaligned where appropriate

This patch makes the code easier to read but does not change any
functionality.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: fix spelling mistake "alredy" -> "already"

There is a spelling mistake in a ql_log message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix driver unload when FC-NVMe LUNs are connected

This patch allows driver to unload using "modprobe -r" when FC-NVMe LUNs
are connected.

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Set remote port devloss timeout to 0

This patch sets remote_port_devloss value to 0. This indicates to FC-NVMe
transport that driver is unloading and transport should not retry.

Fixes: e476fe8af5ff ("scsi: qla2xxx: Fix unload when NVMe devices are configured")
Cc: stable@vger.kernel.org
Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Increase the max_sgl_segments to 1024

This patch increases max_sgl_segments value from 128 to the maximum
supported which is 1024. Increasing max_sgl_segments will allow the driver
to support larger I/O sizes

[mkp: commit desc tweak]

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Check for FW started flag before aborting

For FC-NVMe, if the fw_started flag is not set or fcport is deleted, then
do not send Abort command

Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix unload when NVMe devices are configured

This patch fixes driver unload issue when FC-NVMe devices are configured.

Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add First Burst support for FC-NVMe devices

Add Support for First Burst for FC-NVMe protocol. This feature requires
First Burst support in the firmware.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix NPIV handling for FC-NVMe

This patch fixes issues with NPIV port with FC-NVMe. Clean up code for
remoteport delete and also call nvme_delete when deleting VPs.

Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

nvme-fc: remove ->poll implementation

It's specifically looking for a given request, which we will not be
supporting going forward. Also kill the qla2xxx poll implementation
as that's the only user of the nvme-fc poll, and the now unused
->poll_queue() hook.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

scsi: qla2xxx: Fix driver hang when FC-NVMe LUNs are configured

This patch fixes multiple call for qla_nvme_unregister_remote_port() as part
of qlt_schedule_session_for_deletion(), Do not call it again during
qla_nvme_delete()

Fixes: e473b3074104 ("scsi: qla2xxx: Add FC-NVMe abort processing")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix NVMe session hang on unload

Send aborts only when chip is active.

Fixes: 623ee824e579 ("scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset")
Cc: <stable@vger.kernel.org> # 4.14
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Move {get|rel}_sp to base_qpair struct

Currently, qla2x00_[get_sp|rel_sp] routines does {get|release} of srb
resource/srb_mempool directly from qla_hw_data. qla2x00_start_sp() is used to
issue management commands through the default Request Q 0 & Response Q 0 or
base_qpair. This patch moves access of these resources through
base_qpair. Instead of having knowledge of specific Q number and lock to
rsp/req queue, this change will key off the qpair that is assigned to the srb
resource. This lays the ground work for other routines to see this resource
through the qpair.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Migrate NVME N2N handling into state machine

This patch fixes regression introduced for the N2N support for FC-NVMe. For
FC-NVMe with N2N connection, instead of FW initiating the Login, Driver
starts Login process. This patch migrates that new process from a
standalone path into existing session management state machine. With this
state change now driver will not wait for pull NPort ID from FW.

Fixes: edd05de197592 ("scsi: qla2xxx: Changes to support N2N logins")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling

This patch cleans up ABTS handling for FC-NVMe by

- Removing allocation of sp, instead pass the sp pointer for abort IOCB
- Fix error handling from Trasport failure
- set outstanding_cmds array to NULL for nvme completion

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove nvme_done_list

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Return busy if rport going away

This patch adds mechanism to return EBUSY if rport is going away
to prevent exhausting FC-NVMe layer's retry counter.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add FC-NVMe abort processing

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add changes for devloss timeout in driver

Add support for error recovery within devloss timeout, now that
FC-NVMe transport support devloss timeout.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unneeded message and minor cleanup for FC-NVMe

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Restore ZIO threshold setting

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: remove use of FC-specific error codes

The qla2xxx driver uses the FC-specific error when it needed to return an
error to the FC-NVME transport. Convert to use a generic value instead.

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

scsi: qla2xxx: Fix WWPN/WWNN in debug message

Signed-off-by: Darren Trap <darren.trap@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add command completion for error path

The driver held spinlocks during callbacks for NVME errors which
resulted in a deadlock because recovery LS cmds needed the same lock.

Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix remoteport disconnect for FC-NVMe

Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Simpify unregistration of FC-NVMe local/remote ports

Simplified waiting for unregister local/remote FC-NVMe ports
to complete cleanup.

Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Added change to enable ZIO for FC-NVMe devices

Add support to the driver to set the exchange threshold value for
the number of outstanding AENs.

Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Move function prototype to correct header

Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Cleanup FC-NVMe code

This patch does not change any functionality.

Following cleanups have been done as requested by reviewer

- Changed waitQ --> waitq
- Collapsed multiple debug statements into single
- Remove extra parentheses in if-else as per operator precedence
- Remove unnecessary casting

Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Fix NVMe entry_type for iocb packet on BE system

This patch fixes incorrect assignment for entry_type field for Continuation
Type iocb packet on BE system. This was caught by -Woverflow warning on BE
system compilation.

For Continuation Type iocb driver needs to write complete 32 bit value to
initialize other field members in structure to 0.

Following warning is seen on BE system compile:

drivers/scsi/qla2xxx/qla_nvme.c: In function 'qla2x00_start_nvme_mq':
include/uapi/linux/byteorder/big_endian.h:32:26: warning: large integer
implicitly truncated to unsigned type [-Woverflow]
#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))

[mkp: fixed typo]

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: avoid unused-function warning

When NVMe support is disabled, we get a couple of harmless warnings:

drivers/scsi/qla2xxx/qla_nvme.c:667:13: error: 'qla_nvme_unregister_remote_port' defined but not used [-Werror=unused-function]
drivers/scsi/qla2xxx/qla_nvme.c:634:13: error: 'qla_nvme_abort_all' defined but not used [-Werror=unused-function]
drivers/scsi/qla2xxx/qla_nvme.c:604:12: error: 'qla_nvme_wait_on_rport_del' defined but not used [-Werror=unused-function]

This replaces the preprocessor checks in the code with equivalent
compiler conditionals, which lets gcc drop the unused functions without
warning, and is nicer to read.

Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: fix a bunch of typos and spelling mistakes

Fix the following typos/spelling mistakes:

"attribure" -> "attribute"
"suppored" -> "supported"
"Symobilic" -> "Symbolic"
"iteself" -> "itself"
"reqeust" -> "request"
"nvme_wait_on_comand" -> "nvme_wait_on_command"
"bount" -> "bound"
"captrue_mask" -> "capture_mask"
"tempelate" -> "template"

..and also unwrap a line to fix a checkpatch warning.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration

This code provides the interfaces to register remote and local ports of
FC4 type 0x28 with the FC-NVMe transport and transports the requests
(FC-NVMe FC link services and FC-NVMe commands IUs) to the fabric. It
also provides the support for allocating h/w queues and aborting FC-NVMe
FC requests.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>