#
875386b9 |
|
21-Aug-2023 |
Manish Rangankar <mrangankar@marvell.com> |
scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe Introduce infrastructure in the driver to support the processing of unsolicited LS (Link Service) requests. This will involve the utilization of a new pass-up of unsolicited FC-NVMe request IOCB interface. Unsolicited requests will be submitted to the NVMe transport layer through nvme_fc_rcv_ls_req(). Any received LS responses, which are sent using xmt_ls_rsp(), will be forwarded to the firmware through the existing Pass-Through IOCB interface, responsible for sending FC-NVMe Link Service requests and responses. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230821130045.34850-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
8bfc149b |
|
26-Aug-2022 |
Arun Easi <aeasi@marvell.com> |
scsi: qla2xxx: Enhance driver tracing with separate tunable and more Older tracing of driver messages was to: - log only debug messages to kernel main trace buffer; and - log only if extended logging bits corresponding to this message is off This has been modified and extended as follows: - Tracing is now controlled via ql2xextended_error_logging_ktrace module parameter. Bit usages same as ql2xextended_error_logging. - Tracing uses "qla2xxx" trace instance, unless instance creation have issues. - Tracing is enabled (compile time tunable). - All driver messages, include debug and log messages are now traced in kernel trace buffer. Trace messages can be viewed by looking at the qla2xxx instance at: /sys/kernel/tracing/instances/qla2xxx/trace Trace tunable that takes the same bit mask as ql2xextended_error_logging is: ql2xextended_error_logging_ktrace (default=1) Link: https://lore.kernel.org/r/20220826102559.17474-6-njavali@marvell.com Suggested-by: Daniel Wagner <dwagner@suse.de> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
5ecd241b |
|
06-Jun-2022 |
Quinn Tran <qutran@marvell.com> |
scsi: qla2xxx: edif: Add bsg interface to read doorbell events Add bsg interface for app to read doorbell events. This interface lets driver know how much app can read based on return buffer size. When the next event(s) occur, driver will return the bsg_job with the event(s) in the return buffer. If there is no event to read, driver will hold on to the bsg_job up to few seconds as a way to control the polling interval. Link: https://lore.kernel.org/r/20220607044627.19563-5-njavali@marvell.com Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
7ebb336e |
|
23-Jun-2021 |
Quinn Tran <qutran@marvell.com> |
scsi: qla2xxx: edif: Add start + stop bsgs Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add two new BSG calls: - QL_VND_SC_APP_START: Application will announce its presence to driver with this call. Driver will restart all connections to see if remote device supports security or not. - QL_VND_SC_APP_STOP: Application announces it is in the process of exiting. Driver will restart all connections to revert back to non-secure. Provided the remote device is willing to allow a non-secure connection. Link: https://lore.kernel.org/r/20210624052606.21613-2-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
1cbcc531 |
|
29-Mar-2021 |
Quinn Tran <qutran@marvell.com> |
scsi: qla2xxx: Update default AER debug mask Use PCIe AER debug mask as default. Link: https://lore.kernel.org/r/20210329085229.4367-11-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
77adf3f0 |
|
08-Sep-2020 |
Thomas Gleixner <tglx@linutronix.de> |
scsi/qla2xxx: Convert to SPDX license identifiers All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
49030003 |
|
06-Aug-2020 |
Arun Easi <aeasi@marvell.com> |
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime ql2xextended_error_logging can now be set to 1 to get the default mask value, as opposed to at module load time only. Link: https://lore.kernel.org/r/20200806111014.28434-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
57fec9f2 |
|
29-Jun-2020 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Fix a Coverity complaint in qla2100_fw_dump() 'cnt' can exceed the size of the risc_ram[] array. Prevent that Coverity complains by rewriting an address calculation expression. This patch fixes the following Coverity complaint: CID 337803 (#1 of 1): Out-of-bounds read (OVERRUN) 109. overrun-local: Overrunning array of 122880 bytes at byte offset 122880 by dereferencing pointer &fw->risc_ram[cnt]. Link: https://lore.kernel.org/r/20200629225454.22863-8-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
21038b09 |
|
18-May-2020 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Fix endianness annotations in header files Annotate members of FC protocol and firmware dump data structures as big endian. Annotate members of RISC control structures as little endian. Annotate mailbox registers as little endian. Annotate the mb[] arrays as CPU-endian because communication of the mb[] values with the hardware happens through the readw() and writew() functions. readw() converts from __le16 to u16 and writew() converts from u16 to __le16. Annotate 'handles' as CPU-endian because for the firmware these are opaque values. Link: https://lore.kernel.org/r/20200518211712.11395-15-bvanassche@acm.org CC: Hannes Reinecke <hare@suse.de> Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
66f86367 |
|
18-May-2020 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Make a gap in struct qla2xxx_offld_chain explicit This patch makes struct qla2xxx_offld_chain compatible with ARCH=i386. Link: https://lore.kernel.org/r/20200518211712.11395-7-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Arun Easi <aeasi@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
00fe717e |
|
23-Jan-2020 |
Arun Easi <aeasi@marvell.com> |
scsi: qla2xxx: Fix unbound NVME response length On certain cases when response length is less than 32, NVME response data is supplied inline in IOCB. This is indicated by some combination of state flags. There was an instance when a high, and incorrect, response length was indicated causing driver to overrun buffers. Fix this by checking and limiting the response payload length. Fixes: 7401bc18d1ee3 ("scsi: qla2xxx: Add FC-NVMe command handling") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200124045014.23554-1-hmadhani@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
f8f97b0c |
|
12-Mar-2019 |
Joe Carnuccio <joe.carnuccio@cavium.com> |
scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path This patch does following: - Clean up NVRAM code. - Optimizes reading of primary/secondary flash image validation. - Remove 0xff mask and make correct width in FLT structure. - Use endian macros to assign static fields in fwdump header. - Correct fdwt checksum calculation. - Simplify ql_dump_buffer() interface usage. - Add endianizers to 27xx firmware image validator. - fixes compiler warnings for big endian architecture. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
b945e777 |
|
13-Jun-2017 |
Quinn Tran <quinn.tran@cavium.com> |
scsi: qla2xxx: Include Exchange offload/Extended Login into FW dump Add missing memory dump of Exchange Offload and Extended login into FW dump. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
22d84726 |
|
13-Jun-2017 |
Quinn Tran <quinn.tran@cavium.com> |
scsi: qla2xxx: Add debug logging routine for qpair For target main path io routines that uses qpair, create new logging & debugging routines to use qpair instead of reaching for scsi_qla_host to reduce cache thrash. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
be25152c |
|
15-Mar-2017 |
Quinn Tran <quinn.tran@cavium.com> |
qla2xxx: Improve T10-DIF/PI handling in driver. Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
#
bd21eaf9 |
|
11-Apr-2014 |
Armen Baloyan <armen.baloyan@qlogic.com> |
qla2xxx: Change copyright year to 2014 in all the source files. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
61f098dd |
|
11-Apr-2014 |
Hiral Patel <hiral.patel@qlogic.com> |
qla2xxx: Introduce fw_dump_flag to track fw dump progress. Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
2f389fc4 |
|
11-Apr-2014 |
Hiral Patel <hiral.patel@qlogic.com> |
qla2xxx: Remove unnecessary delays from fw dump code path. Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
f73cb695 |
|
26-Feb-2014 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Add support for ISP2071. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
1e63395c |
|
07-Feb-2013 |
Saurav Kashyap <saurav.kashyap@qlogic.com> |
[SCSI] qla2xxx: Update the copyright information. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
46152ceb |
|
22-Aug-2012 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Update the driver copyright. Update the driver copyright from 2003-2011 to 2003-2012. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
2d70c103 |
|
15-May-2012 |
Nicholas Bellinger <nab@linux-iscsi.org> |
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
5f28d2d7 |
|
15-May-2012 |
Saurav Kashyap <saurav.kashyap@qlogic.com> |
[SCSI] qla2xxx: Add ql_dbg_verbose logging level. Add an extra layer of logging granularity for messages that are necessary in some circumstances but may flood the kernel log buffer with too many messages otherwise. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
6246b8a1 |
|
09-Feb-2012 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Enhancements to support ISP83xx. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
050c9bb1 |
|
09-Feb-2012 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Enhanced the dump routines to capture multiple request and response queues. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
cfb0919c |
|
18-Nov-2011 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Update to dynamic logging. This patch contains minor fixes to our new logging infrastructure: - Remove extranous messages. - Re-add 'nexus' and 'hdl' information. - Adjusted the message ids to fill up the holes. - Display FCP_CMND priority on update. - Log only mail box error conditions. - Do not print "Firmware ready **** FAILED ****" if cable is unplugged. - Drop noisy 'fw_state...curr time...' message. - Correct nexus display during abort. - Add a special case error-logging set to '1'. - Catagorize I/O exception display handling. - Correct the bsg msg code printing. - Dont use dynamic logging after host is removed. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
d8424f68 |
|
18-Nov-2011 |
Joe Perches <joe@perches.com> |
[SCSI] qla2xxx: Make the logging functions verify their arguments and fixed the current broken uses as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
086b3e8a |
|
18-Nov-2011 |
Joe Perches <joe@perches.ccom> |
[SCSI] qla2xxx: Use less stack to emit logging messages. Return early when logging level too low. Use normal kernel codeing style for function braces. Add const where appropriate to logging functions. Remove now unused #define QL_DBG_BUF_LEN. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
92fd65c0 |
|
14-Jul-2011 |
Saurav Kashyap <saurav.kashyap@qlogic.com> |
[SCSI] qla2xxx: Cleanup of previous infrastructure. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
3ce8866c |
|
14-Jul-2011 |
Saurav Kashyap <saurav.kashyap@qlogic.com> |
[SCSI] qla2xxx: Basic infrastructure for dynamic logging. This patch adds the dynamic logging framework to the qla2xxx driver. The user will be able to change the logging levels on the fly i.e. without load/unload of the driver. This also enables logging to be enabled for a particular section of the driver such as initialization, device discovery etc. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
07e264b7 |
|
30-Mar-2011 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
feafb7b1 |
|
03-Sep-2010 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: Fix vport delete issues Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
de7c5d05 |
|
23-Jul-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
bad75002 |
|
04-May-2010 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: T10 DIF support added. Signed-off-by: Duane Grigsby <duane.grigsby@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
85880801 |
|
15-Dec-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Extend base EEH support in qla2xxx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
3a03eb79 |
|
05-Jan-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP81XX support. Codes to support new FCoE boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
73208dfd |
|
09-Dec-2008 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: add support for multi-queue adapter Following changes have been made. 1. qla_hw_data structure holds an array for request queue pointers, and an array for response queue pointers. 2. The base request and response queues are created by default. 3. Additional request and response queues are created at the time of vport creation. If queue resources are exhausted during vport creation, newly created vports use the default queue. 4. Requests are sent to the request queue that the vport was assigned in the beginning. 5. Responses are completed on the response queue with which the request queue is associated with. [fixup memcpy argument reversal spotted by davej@redhat.com] Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
4d4df193 |
|
03-Apr-2008 |
Harihara Kadayam <harihara.kadayam@qlogic.com> |
[SCSI] qla2xxx: Add ISP84XX support. Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
587f4cae |
|
03-Apr-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Cruft cleanup of functions and structures. Strip unused (DEBUG-ONLY) enabled functions, inlines, useless wrappers, and unused DPC flags from the code. Another step in the migration towards a cleaner (less-crusty) driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
01e58d8e |
|
03-Apr-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
df613b96 |
|
17-Jan-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support. FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: <debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
b5836927 |
|
20-Sep-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Query additional RISC registers during ISP25XX firmware dump. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
c3a2f0df |
|
19-Jul-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP25XX support. Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
2c3dfe3f |
|
05-Jul-2007 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: add support for NPIV Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
11010fec |
|
06-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] Maintain module-parameter name consistency with qla2xxx/qla4xxx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
d7a297ba |
|
05-Oct-2006 |
Frederik Deweerdt <deweerdt@free.fr> |
[PATCH] fix qla{2,4} build error commit 0181944fe647cae18d545ac1167df3d15d393701 adds a 'extended_error_logging' global variable to qla2xxx which is defined by qla4xxx too. Trying to build both drivers results in the following error: LD drivers/scsi/built-in.o drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure': drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging' drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166: first defined here make[2]: *** [drivers/scsi/built-in.o] Error 1 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 The following patch simply adds a qla2_ (qla4_ respectively) prefix to the variable name. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
0181944f |
|
23-Jun-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support for extended error logging. Similar in form to QLogic's standard offering -- via the 'extended_error_logging' module parameter. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
744f11fd |
|
23-Jun-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Cleanup DEBUG macro usage. - macro usage statements should terminate with a ';' - remove unused macros. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
a7a167bf |
|
23-Jun-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Rework firmware-trace facilities. - Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
210d5350 |
|
13-Jan-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update firmware-dump procedure for ISP24xx. Small changes to register retrieval and order as per latest firmware specification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
fa90c54f |
|
27-Oct-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update license. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
cca5335c |
|
26-Aug-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add FDMI support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
ae91193c |
|
06-Jul-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner. Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
6d9b61ed |
|
06-Jul-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP24xx diagnostic routines. Add ISP24xx diagnostic routines. Add function and structure definitions for the ISP24xx diagnostic firmware dump routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|