scsi: pm8001: Remove PM8001_READ_VPD

Remove the macro PM8001_READ_VPD used to define if a controller WWN should
be retrieved from the device. Instead, define the better named boolean
module parameter "read_wwn" to control this.

The code to set a fixed address for a phy device address when read_wwn is
set to false is simplified and fixed to avoid sparse warnings.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-11-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove PM8001_USE_TASKLET

Remove the macro PM8001_USE_TASKLET used to conditionally use tasklets for
MSI-X interrupts handling and replace it with the boolean module parameter
pm8001_use_tasklet. This parameter defaults to true and can be true only if
pm8001_use_msix is also true.

Code conditionnaly defined with PM8001_USE_TASKLET is modified to instead
use the parameter pm8001_use_tasklet.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-10-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove PM8001_USE_MSIX

The pm8001 driver does not compile if PM8001_USE_MSIX is not defined in
pm8001_sas.h because various fields and functions conditionally defined are
used unconditionally without a "#ifdef PM8001_USE_MSIX" protection. This
macro is rather useless anyway and not convenient as diabling MSI-X use
requires recompiling the driver.

Remove this macro and replace it with the bool module parameter "use_msix"
which defaults to true. The use of MSI-X interrupts for an adapter is gated
by this module parameter for adapters that actually support MSI-X. The
"use_msix" boolean field is added to struct pm8001_hba_info and all code
defined depending on PM8001_USE_MSIX is modified to rely on
pm8001_hba_info->use_msix instead.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-9-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove unused declarations

Commit 4fcf812ca392 ("[SCSI] libsas: export sas_alloc_task()") removed
these implementations but not the declarations.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230818124700.49724-1-yuehaibing@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Log some HW events by default

Log the following hw_event logs under EVENT log severity to help debug disk
issues:

HW_EVENT_LINK_ERR_INVALID_DWORD
HW_EVENT_LINK_ERR_DISPARITY_ERROR
HW_EVENT_LINK_ERR_CODE_VIOLATION
HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH
HW_EVENT_LINK_ERR_PHY_RESET_FAILED
HW_EVENT_INBOUND_CRC_ERROR
HW_EVENT_PHY_ERROR
HW_EVENT_SAS_PHY_UP
HW_EVENT_SATA_PHY_UP
HW_EVENT_SATA_SPINUP_HOLD
HW_EVENT_PHY_DOWN
HW_EVENT_PORT_INVALID
HW_EVENT_MALFUNCTION
HW_EVENT_PORT_RESET_TIMER_TMO
HW_EVENT_PORT_RECOVERY_TIMER_TMO
HW_EVENT_HARD_RESET_RECEIVED
HW_EVENT_ID_FRAME_TIMEOUT
HW_EVENT_PORT_RECOVER

Signed-off-by: Akshat Jain <akshatzen@google.com>
Signed-off-by: Pranav Prasad <pranavpp@google.com>
Link: https://lore.kernel.org/r/20230418190101.696345-2-pranavpp@google.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Remove unused reset_in_progress flag logic

The reset_in_progress flag was never set.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20221007230751.309363-1-ipylypiv@google.com
Reviewed-by: Andrew Konecki <awkonecki@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Use sas_task_find_rq() for tagging

The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a CCB.

Unfortunately we don't support reserved commands in the SCSI midlayer yet,
so in the interim continue to manage those tags internally (along with
tags for private commands).

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-6-git-send-email-john.garry@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove pm8001_tag_init()

In commit 5a141315ed7c ("scsi: pm80xx: Increase the number of outstanding
I/O supported to 1024") the pm8001_ha->tags allocation was moved into
pm8001_init_ccb_tag(). This changed the execution order of allocation.
pm8001_tag_init() used to be called after the pm8001_ha->tags allocation
and now it is called before the allocation.

Before:

pm8001_pci_probe()
`--> pm8001_pci_alloc()
`--> pm8001_alloc()
`--> pm8001_ha->tags = kzalloc(...)
`--> pm8001_tag_init(pm8001_ha); // OK: tags are allocated

After:

pm8001_pci_probe()
`--> pm8001_pci_alloc()
| `--> pm8001_alloc()
| `--> pm8001_tag_init(pm8001_ha); // NOK: tags are not allocated
|
`--> pm8001_init_ccb_tag()
`--> pm8001_ha->tags = kzalloc(...) // today it is bitmap_zalloc()

Since pm8001_ha->tags_num is zero when pm8001_tag_init() is called it does
nothing. Tags memory is allocated with bitmap_zalloc() so there is no need
to manually clear each bit with pm8001_tag_free().

Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-5-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors

In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the
driver had support added to handle NCQ errors but much of what is done in
this handling is duplicated from the libata EH.

In that named commit we handle in 2x main steps:

a. Issue read log ext10 to examine and clear the errors

b. Issue SATA_ABORT all command

Indeed, in libata EH, we do similar to above:

a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() ->
ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h()

b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset
or hard reset

Since there is so much duplication, use sas_ata_device_link_abort() which
will abort all pending IOs and kick of ATA EH which will do the steps,
above.

However we will not follow the advisory to send the SATA_ABORT all command
after the autopsy in read log ext10. Indeed, in libsas EH, we already send
a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in
and issuing the read log ext10 in the recovery process. I judge that this
is ok as the SATA_ABORT command does not actually send any protocol on the
link to abort I/O on the other side, so would not change any state on the
disk (for the read log ext10 command).

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-7-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Replace one-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct fw_control_info.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/207
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Link: https://lore.kernel.org/r/Yyy31OuBza1FJCXP@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Expose hardware queues for pm80xx

In commit 05c6c029a44d ("scsi: pm80xx: Increase number of supported
queues"), support for 80xx chip was improved by enabling multiple HW
queues.

In this, like other SCSI MQ HBA drivers at the time, the HW queues were not
exposed to upper layer, and instead the driver managed the queues
internally.

However, this management duplicates blk-mq code. In addition, the HW queue
management is sub-optimal for a system where the number of CPUs exceeds the
HW queues - this is because queues are selected in a round-robin fashion,
when it would be better to make adjacent CPUs submit on the same queue. And
finally, the affinity of the completion queue interrupts is not set to
mirror the cpu<->HQ queue mapping, which is suboptimal.

As such, for when MSIX is supported, expose HW queues to upper layer. We
always use queue index #0 for "internal" commands, i.e. anything which does
not come from the block layer, so omit this from the affinity spreading.

Link: https://lore.kernel.org/r/1654879602-33497-5-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Set up tags before using them

The current code is buggy in that the tags are set up after they are needed
in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag
depth is earlier read in pm80xx_chip_init() -> read_main_config_table().

Add a post init callback to do the pm80xx work which needs to be done after
reading the tags. I don't see a better way to do this.

Link: https://lore.kernel.org/r/1654879602-33497-3-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Use libsas internal abort support

New special handling is added for SAS_PROTOCOL_INTERNAL_ABORT proto so that
we may use the common queue command API.

Link: https://lore.kernel.org/r/1647001432-239276-4-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix pm8001_info() message format

Make the driver messages more readable by adding a space after the message
prefix ":" and removing the extra space between function name and line
number.

Link: https://lore.kernel.org/r/20220220031810.738362-32-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Simplify pm8001_ccb_task_free()

The task argument of the pm8001_ccb_task_free() function can be inferred
from the ccb argument ccb_task field. So there is no need to have this
argument. Likewise, the ccb_index argument is always equal to the ccb tag
field and is not needed either. Remove both arguments and update all call
sites. The pm8001_ccb_task_free_done() helper is also modified to match
this change.

Link: https://lore.kernel.org/r/20220220031810.738362-30-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Simplify pm8001_mpi_build_cmd() interface

There is no need to pass a pointer to a struct inbound_queue_table to
pm8001_mpi_build_cmd(). Passing the start index in the inbound queue table
of the adapter is enough. This change allows avoiding the declaration of a
struct inbound_queue_table pointer (circularQ variables) in many functions,
simplifying the code.

While at it, blank lines are added i(e.g. after local variable
declarations) to make the code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-28-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Introduce ccb alloc/free helpers

Introduce the pm8001_ccb_alloc() and pm8001_ccb_free() helpers to replace
the typical code patterns:

res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
if (res)
...
ccb = &pm8001_ha->ccb_info[ccb_tag];
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
ccb->n_elem = 0;

and

ccb->task = NULL;
ccb->ccb_tag = PM8001_INVALID_TAG;
pm8001_tag_free(pm8001_ha, tag);

With the simpler function calls:

ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
if (!ccb)
...

and

pm8001_ccb_free(pm8001_ha, ccb);

The pm8001_ccb_alloc() helper ensures that all fields of the ccb info
structure for the newly allocated tag are all initialized, except the
buf_prd field. The pm8001_ccb_free() helper clears the initialized fields
and the ccb tag to ensure that iteration over the adapter ccb_info array
detects ccbs that are in use.

All call site of the pm8001_tag_alloc() function that use a ccb info
associated with an allocated tag are converted to use the new helpers.

Link: https://lore.kernel.org/r/20220220031810.738362-27-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix tag values handling

The function pm8001_tag_alloc() determines free tags using the function
find_first_zero_bit() which can return 0 when the first bit of the bitmap
being inspected is 0. As such, tag 0 is a valid tag value that should not
be dismissed as invalid. Fix the functions pm8001_work_fn(),
mpi_sata_completion(), pm8001_mpi_task_abort_resp() and
pm8001_open_reject_retry() to not dismiss 0 tags as invalid.

The value 0xffffffff is used for invalid tags for unused ccb information
structures. Add the macro definition PM8001_INVALID_TAG to define this
value.

Link: https://lore.kernel.org/r/20220220031810.738362-20-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Add sas_abort_task_set()

Add a generic implementation of abort task set TMF handler, and use in
LLDDs.

Link: https://lore.kernel.org/r/1645112566-115804-14-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Add TMF handler aborted callback

The hisi_sas and pm8001 TMF handlers have some special processing for when
the TMF is aborted, so add a callback and fill it in for those drivers.

Link: https://lore.kernel.org/r/1645112566-115804-13-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Add TMF handler exec complete callback

The pm8001 TMF handler has some special processing when the TMF completes,
so add a callback and fill it in for the pm8001 driver.

Link: https://lore.kernel.org/r/1645112566-115804-12-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Add struct sas_tmf_task

Some of the LLDDs which use libsas have their own definition of a struct
to hold TMF info, so add a common struct for libsas.

Also add an interim force phy id field for hisi_sas driver, which will be
removed once the STP "TMF" code is factored out.

Even though some LLDDs (pm8001) use a u32 for the tag, u16 will be adequate,
as that named driver only uses tags in range [0, 1024).

Link: https://lore.kernel.org/r/1645112566-115804-8-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Delete lldd_clear_aca callback

This callback is never called, so remove support.

Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Port reset timeout error handling correction

Error handling steps were not in sequence as per the programmers
manual. Expected sequence:

- PHY_DOWN (PORT_IN_RESET)

- PORT_RESET_TIMER_TMO

- Host aborts pending I/Os

- Host deregister the device

- Host sends HW_EVENT_PHY_DOWN ACK

Previously we were sending HW_EVENT_PHY_DOWN ACK first and then deregister
the device. Fix this to use the expected sequence.

Link: https://lore.kernel.org/r/20211228111753.10802-1-Ajish.Koshy@microchip.com
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Switch to attribute groups

struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.

Link: https://lore.kernel.org/r/20211012233558.4066756-36-bvanassche@acm.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Fix memory leak during rmmod

Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.

Properly free memory when the module is removed.

Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Fix lockup in outbound queue management

Commit 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue
processing") introduced a lock per outbound queue. Prior to that change the
driver was using a global lock for all outbound queues.

While processing the I/O responses and events the driver takes the outbound
queue spinlock and is supposed to release it in pm8001_ccb_task_free_done()
before calling command done(). Since the older code was using a global
lock, pm8001_ccb_task_free_done() was releasing the global spin lock. The
change that split the lock per outbound queue did not consider this and
pm8001_ccb_task_free_done() was still releasing the global lock.

Link: https://lore.kernel.org/r/20210906170404.5682-3-Ajish.Koshy@microchip.com
Fixes: 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue processing")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Fix incorrect port value when registering a device

During phyup event, the firmware provides the phy_id and port_id and driver
is supposed to use these during device handle registration. Previously the
driver was using the port id value from libsas during device handle
registration. Since id can be different from the one assigned by firmware,
this can lead to wrong device registration and drives not showing up.

Use firmware assigned port id during device registration.

Link: https://lore.kernel.org/r/20210906170404.5682-2-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Remove global lock from outbound queue processing

Introduce spin lock for outbound queue. With this, driver need not acquire
HBA global lock for outbound queue processing.

Link: https://lore.kernel.org/r/20210415103352.3580-9-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Completing pending I/O after fatal error

When controller runs into fatal error, I/Os get stuck with no response,
handler event is defined to complete the pending I/Os (SAS task and
internal task) and also perform the cleanup for the drives.

Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Clean up white space

checkpatch reports the following:

ERROR: space prohibited before that ',' (ctx:WxW)
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);

Remove unnecessary whitespace.

Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Remove list entry from pm8001_ccb_info

List entry is not used.

Link: https://lore.kernel.org/r/20210301181847.2893199-1-ipylypiv@google.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Check for fatal error

When the controller runs into a fatal error, commands get stuck due to no
response. If the controller is in fatal error state, abort requests issued
to the controller get stuck too.

Check the controller state for fatal error conditions.

Link: https://lore.kernel.org/r/20210109123849.17098-3-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: akshatzen <akshatzen@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Convert pm8001_printk() to pm8001_info()

Use the more common logging style.

[mkp: fixed a few conflicts]

Link: https://lore.kernel.org/r/69dc34ff63adfa60b3f203ed2d58143b5692af57.1606192458.git.joe@perches.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Make implicit use of pm8001_ha in pm8001_printk() explicit

Make the pm8001_printk() macro take an explicit HBA instead of assuming the
existence of an unspecified pm8001_ha argument.

Miscellanea:

- Add pm8001_ha to the few uses of pm8001_printk()

- Add HBA to the pm8001_dbg macro call to pm8001_printk()

Link: https://lore.kernel.org/r/0e17a4c845f15e18f98b346ffb9b039584d21cdd.1605914030.git.joe@perches.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Neaten debug logging macros and uses

Every PM8001_<FOO>_DBG macro uses an internal call to pm8001_printk.

Convert all uses of:

PM8001_<FOO>_DBG(hba, pm8001_printk(fmt, ...))
to
pm8001_dbg(hba, <FOO>, fmt, ...)

so the visual complexity of each macro is reduced.

The repetitive macro definitions are converted to a single pm8001_dbg and
the level is concatenated using PM8001_##level##_LOGGING for the specific
level test.

Done with coccinelle, checkpatch and a little typing of the new macro
definition.

Miscellanea:

- Coalesce formats

- Realign arguments

- Add missing terminating newlines to formats

- Remove trailing spaces from formats

- Change defective loop with printk(KERN_INFO... to emit a 16 byte hex
block to %p16h

Link: https://lore.kernel.org/r/49f36a93af7752b613d03c89a87078243567fd9a.1605914030.git.joe@perches.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Make running_req atomic

Incorrect value of the running_req was causing the driver unload to be
stuck during the SAS lldd_dev_gone notification handling. During SATA I/O
completion, for some error status values, the driver schedules the event
handler and running_req is decremented from that. However, there are some
other error status values (like IO_DS_IN_RECOVERY,
IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR) where the I/O has already been
completed by fw/driver so running_req is not decremented.

Also during NCQ error handling, driver itself will initiate READ_LOG_EXT
and ABORT_ALL. When libsas/libata initiate READ_LOG_EXT (0x2F), driver
increments running_req. This will be completed by the driver in
pm80xx_chip_sata_req(), but running_req was not decremented.

Link: https://lore.kernel.org/r/20201102165528.26510-3-Viswas.G@microchip.com.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Driver version update

Update driver version from "0.1.39" -> "0.1.40"

Link: https://lore.kernel.org/r/20201005145011.23674-5-Viswas.G@microchip.com.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Increase the number of outstanding I/O supported to 1024

The pm80xx driver currently sets the controller queue depth to
256. Hoewver, the controller supports outstanding I/Os up 1024.

Increase the number of outstanding I/Os from 256 to 1024. CCBs and tags
are allocated according to outstanding I/Os. Also update the can_queue
value (max_out_io - PM8001_RESERVE_SLOT) used by the SCSI midlayer.

[mkp: fixed zeroday complaint]

Link: https://lore.kernel.org/r/20201005145011.23674-4-Viswas.G@microchip.com.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Increase number of supported queues

Current driver uses fixed number of Inbound and Outbound queues and all of
the I/O, TMF and internal requests are submitted through those. A global
spin lock is used to control the shared access. This can create a lock
contention and it is real bottleneck in the I/O path.

To avoid this, the number of supported Inbound and Outbound queues is
increased to 64, and the number of queues used is decided based on number
of CPU cores online and number of MSI-X vectors allocated. Also add locks
per queue instead of using the global lock.

Link: https://lore.kernel.org/r/20201005145011.23674-2-Viswas.G@microchip.com.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Introduce read and write length for IOCTL payload structure

Removed the common length and introduce read and write length for IOCTL
payload structure.

[mkp: fixed SoB ordering]

Link: https://lore.kernel.org/r/20200316074906.9119-7-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <viswas.g@microchip.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: sysfs attribute for non fatal dump

Added the sysfs attribute for non fatal log so that management utility can
get the non fatal dump from driver. The non-fatal error is an error
condition or abnormal behavior detected by the host, or detected and
reported by the controller to the host.The non-fatal error does not stop
the controller firmware and enables it to still respond to host requests.
A typical example of a non-fatal error is an I/O timeout or an unusual
error notification from the controller. Since the firmware is operational,
the error dump information is pushed to host memory (by firmware) upon
request from the host.

Link: https://lore.kernel.org/r/20200316074906.9119-6-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Modified the logic to collect fatal dump

Added the correct method to collect the fatal dump.

Link: https://lore.kernel.org/r/20191114100910.6153-14-deepak.ukey@microchip.com
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Tie the interrupt name to the module instance

With MSI-x enabled, the interrupt instances are <prefix><index> where the
prefix is fixed for all module instances, making it a little harder to
track down what's what.

Link: https://lore.kernel.org/r/20191114100910.6153-13-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Vikram Auradkar <auradkar@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Do not request 12G sas speeds

Occasionally, 6G capable drives fail to train at 6G on links that look good
from a signal-integrity perspective. PMC suggests configuring the port to
not even expect 12G.

Link: https://lore.kernel.org/r/20191114100910.6153-11-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Fix command issue sizing

The commands to the controller are sent in fixed sized chunks which are set
per-chip-generation and stashed in iomb_size. The driver fills in structs
matching the register layout and memcpy this to memory shared with the
controller. However, there are two problem cases:

1) Things like phy_start_req are too large because they share the
sas_identify_frame definition with libsas, and it includes the crc
word. This means that it's overwriting the start of the next
command block, that's ok except if it happens at the end of the
shared memory area.

2) Things like set_nvm_data_req which are shared between the HAL
layers. This means that it's sending 'random' data for things that
are in the reserved area. So far we haven't found a case where the
controller FW cares, but sending possible gibberish (for most of
the structures this is in the reserved area so previously zeroed)
is not recommended.

Link: https://lore.kernel.org/r/20191114100910.6153-9-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Squashed logging cleanup changes

The default logging doesn't include the device name, so it's difficult to
determine which controller is being logged about in error scenarios. The
logging level was only settable via sysfs, which made it inconvenient for
actual debugging. This changes the default to only cover error handling.

Link: https://lore.kernel.org/r/20191114100910.6153-6-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()

Many times in libsas, and in LLDDs which use libsas, the check for an
expander device is re-implemented or open coded.

Use dev_is_expander() instead. We rename this from
sas_dev_type_is_expander() to not spill so many lines in referencing.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: fix spelling mistake, interupt -> interrupt

Rename the functions pm8001_chip_is_our_interupt,
pm80xx_chip_is_our_interupt and function pointer is_our_interrupt to fix
spelling mistakes.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Update driver version to 0.1.39

Updated the driver version from 0.1.38 to 0.1.39.

Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Fixed system hang issue during kexec boot

When the firmware is not responding, execution of kexec boot causes a system
hang. When firmware assertion happened, driver get notified with interrupt
vector updated in MPI configuration table. Then, the driver will read
scratchpad register and set controller_fatal_error flag to true.

Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: corrected SATA abort handling sequence.

Modified SATA abort handling with following steps:

1) Set device state as recovery.
2) Send phy reset.
3) Wait for reset completion.
4) After successful reset, abort all IO's to the device.
5) After aborting all IO's to device, set device state as operational.

Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: ILA and inactive firmware version through sysfs

Added support to read ILA version and inactive firmware version from MPI
configuration table and export through sysfs.

Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: switch to pci_irq_alloc_vectors

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pm80xx: set PHY profiles for ATTO 12Gb SAS controllers

PHY profiles are not saved in NVRAM on ATTO 12Gb SAS controllers.
Therefore, in order for the controller to function in a wide range of
configurations, the PHY profiles must be statically set. This patch
provides the necessary functionality to do so.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pm80xx: add support for PMC Sierra 8070 and PMC Sierra 8072 SAS controllers

These SAS controllers support speeds up to 12Gb.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pm80xx: Bump pm80xx driver version to 0.1.38

Bump pm80xx driver version to 0.1.38.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

pm80xx: Add PORT RECOVERY TIMEOUT support

PORT RECOVERY TIMEOUT is the maximum time between the controller's
detection of the PHY down until the receipt of the ID_Frame (from the
same remote SAS port). If the time expires before the ID_FRAME is
received, the port is considered INVALID and can be removed. The
IOP_EVENT_PORT_RECOVERY_TIMER_TMO event is reported following the
IOP_EVENT_ PHY_DOWN event when the PHY/port does not recover after
Port Recovery Time.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

pm80xx: Corrected device state changes in I_T_Nexus_Reset.

In Nexus reset the device state request are not needed.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

libsas: remove task_collector mode

The task_collector mode (or "latency_injector", (C) Dan Willians) is an
optional I/O path in libsas that queues up scsi commands instead of
directly sending it to the hardware. It generall increases latencies
to in the optiomal case slightly reduce mmio traffic to the hardware.

Only the obsolete aic94xx driver and the mvsas driver allowed to use
it without recompiling the kernel, and most drivers didn't support it
at all.

Remove the giant blob of code to allow better optimizations for scsi-mq
in the future.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>

pm8001: add a new spinlock to protect the CCB

Patch adds a new spinlock to protect the ccb management.
It may happen that concurrent threads become the same tag value
from the 'alloc' function', the spinlock prevents this situation.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

pm8001: clean bitmap management functions

In the driver two different functions are used to free the same resource,
this patch makes the code easier to read. In addittion to that, some
minor optimisations were made too.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

[SCSI] pm80xx: Spinlock fix

spin_lock_irqsave for the HBA lock is called in one function where flag
is local to that function. Another function is called from the first
function where lock has to be released using spin_unlock_irqrestore for
calling task_done of libsas. In the second function also flag is declared
and used. For calling task_done there is no need to enable the irq. So
instead of using spin_lock_irqsave and spin_unlock_irqrestore, spin_lock
and spin_unlock is used now. This also avoids passing the flags across all
the functions where HBA lock is being used. Also removed redundant code.

Reported-by: Jason Seba <jason.seba42@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Viswas G <viswas.g@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Tasklets synchronization fix.

When multiple vectors are used, the vector variable is over written,
resulting in unhandled operation for those vectors.
This fix prevents the problem by maitaining HBA instance and
vector values for each irq.

[jejb: checkpatch fixes]
Signed-off-by: Nikith.Ganigarakoppal@pmcs.com
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Firmware logging support.

Supports below logging facilities,
Inbound outbound queues dump.
Non fatal dump in case of IO failures.
Fatal dump in case of firmware failure.

[jejb: checkpatch spacing fixes]
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Phy settings support for motherboard controller.

Phy profile implementation to support phy settings feature
for motherboard controllers.

[jejb: checkpatch fixes]
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Device id changes to support series 8 controllers.

Updated pci id table with device, vendor, subdevice and subvendor ids
for 8074, 8076, 8077 SAS/SATA 12G controllers. Added 12G related macros.

Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type

These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas. The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them. The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: thermal, sas controller config and error handling update

Modified thermal configuration to happen after interrupt registration
Added SAS controller configuration during initialization
Added error handling logic to handle I_T_Nexus errors and variants

[jejb: fix up tabs and spaces issues]
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: NCQ error handling changes

Handled NCQ errors in the low level driver as the FW
is not providing the faulty tag for NCQ errors for libsas
to recover.

[jejb: fix checkpatch issues]
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Changed module name and debug messages update

Changed name in driver to pm80xx. Updated debug messages.

Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files

Implementation of SPCv/ve specific hardware functionality and
macros. Changing common functionalities wrt SPCv/ve operations.
Conditional checks for SPC specific operations.

Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: MSI-X implementation for using 64 interrupts

Implementation of interrupt handlers and tasklets to support
upto 64 interrupt for the device.

Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve

Update of function prototype for common function to SPC and SPCv/ve.
Multiple queues implementation for IO.

Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC

Updated pci id table with device, vendor, subdevice and subvendor ids
for 8081, 8088, 8089 SAS/SATA controllers. Added SPCv/ve related macros.
Updated macros, hba info structure and other structures for SPCv/ve.
Update of structure and variable names for SPC hardware functionalities.

Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm8001: deficient responses to IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT

IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT are deficient of the
required actions as outlined in the programming manual for the pm8001. Due to
the overlapping code requirements of these recovery responses, we found it
necessary to bundle them together into one patch.

When a break is received during the command phase (ssp_completion), this is a
result of a timeout or interruption on the bus. Logic suggests that we should
retry the command.

When a break is received during the data-phase (ssp_event), the task must be
aborted on the target or it will retain a data-phase lock turning the target
reticent to all future media commands yet will successfully respond to TUR,
INQUIRY and ABORT leading eventually to target failure through several
abort-cycle loops.

The open retry interval is exceedingly short resulting in occasional target
drop-off during expander resets or when targets push-back during bad-block
remapping. Increased effective timeout from 130ms to 1.5 seconds for each try
so as to trigger after the administrative inquiry/tur timeout in the scsi
subsystem to keep error-recovery harmonics to a minimum.

When an open retry timeout event is received, the action required by the
targets is to issue an abort for the outstanding command then logic suggests
we retry the command as this state is usually an indication of a credit block
or busy condition on the target.

We hijacked the pm8001_handle_event work queue handler so that it will handle
task as an argument instead of device for the workers in support of the
deferred handling outlined above.

Moderate to Heavy bad-path testing on a 2.6.32 vintage kernel, compile-testing
on scsi-misc-2.6 kernel ...

Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm8001: Add FUNC_GET_EVENTS

Jack noticed I dropped a patch fragment associated with a flags automatic
variable in mpi_set_phys_g3_with_ssc (ooops) and that the pre-emptive locking
that piggy-backed this patch was not in-fact necessary because of underlying
atomic accesses to the hardware. Here is the updated patch fixing these two
issues.

The pm8001 driver is missing the FUNC_GET_EVENTS handler in the phy control
function. Since the pm8001_bar4_shift function was not designed to be called
at runtime, added locking surrounding the adjustment for all accesses.

Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] pm8001: remove pm8001_slave_{alloc|configure}

libsas handles:
1/ limiting ata scanning to lun0
2/ changes to /sys/block/<sdX>/device/queue_depth for ata devices

libata handles turning off ncq globally via kernel command line
(libata.force=noncq) or sysfs (echo 1 >
/sys/block/<sdX>/device/queue_depth). A lldd specific compile option is
not necessary.

Cc: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

atomic: use <linux/atomic.h>

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

[SCSI] pm8001: simplify workqueue usage

pm8001 manages its own list of pending works and cancel them on device
free. It is unnecessarily complex and has a race condition - the
works are canceled but not synced, so the work could still be running
during and after the data structures are freed.

This patch simplifies workqueue usage.

* A driver specific workqueue pm8001_wq is created to serve these
work items.

* To avoid confusion, the "queue" suffixes are dropped from work items
and functions.

* Delayed queueing was never used. pm8001_work now uses work_struct
instead.

* The driver no longer keeps track of pending works. All pm8001_works
are queued to pm8001_wq and the workqueue is flushed as necessary.

flush_scheduled_work() usage is removed during conversion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

BKL: remove extraneous #include <smp_lock.h>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[SCSI] pm8001: misc code cleanup

Add more data to printk's, add some spaces around arithmetic ops and
improve comments.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] pm8001: enable read HBA SAS address from VPD

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] pm8001: enhance error handle for IO patch

Enhance error handle for IO patch, when the port is down, fast return phy
down for task.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] pm8001: enhance IOMB process modules

We set interupt cascading count of outbound queue to get better
performance, correct some unnecessary return values and some noisy
print messages. patch attached.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] pm8001: add reinitialize SPC parameters before phy start

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] pm8001: add SAS/SATA HBA driver

This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Kevin Ao <aoqingyun@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>