scsi: fnic: Move fnic_fnic_flush_tx() to a work queue

Rather than call 'fnic_flush_tx()' from interrupt context we should be
moving it onto a work queue to avoid any locking issues.

Fixes: 1a1975551943 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock")
Co-developed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Link: https://lore.kernel.org/r/ce5ffa5d0ff82c2b2e283b3b4bff23291d49b05c.1707500786.git.lduncan@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Add support for multiqueue (MQ) in fnic driver

Implement support for MQ in fnic driver:

The block multiqueue layer issues IO to the fnic driver with an MQ tag. Use
the mqtag and derive a tag from it. Derive the hardware queue from the
mqtag and use it in all paths. Modify queuecommand to handle mqtag.

Replace wq and cq indices to support MQ. Replace the zeroth queue with a
hardware queue. Implement spin locks on a per hardware queue basis.
Replace io_lock with per hardware queue spinlock. Implement out of range
tag checks.

Allocate an io_req_table to track status of the io_req.

Test the driver by building it, loading it, and configuring 64 queues in
UCSM. Issue IOs using Medusa on multiple fnics. Enable/disable links to
exercise the abort and clean up path.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310300032.2awCqkfn-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-12-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c

Set map_queues in the fnic_host_template to fnic_mq_map_queues_cpus.
Define fnic_mq_map_queues_cpus to set cpu assignment to fnic queues.
Refactor code in fnic_probe to enable vnic queues before scsi_add_host.
Modify notify set to the correct index.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-11-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Modify ISRs to support multiqueue (MQ)

Modify interrupt service routines for INTx, MSI, and MSI-x to support
multiqueue. Modify parameter list of fnic_wq_copy_cmpl_handler to take
cq_index. Modify fnic_cleanup function to use the new function call of
fnic_wq_copy_cmpl_handler. Refactor code to set interrupt mode to MSI-x to
a new function. Add a new stat for intx_dummy.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310251847.4T8BVZAZ-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-8-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Rename wq_copy to hw_copy_wq

Rename wq_copy to hw_copy_wq to accurately describe the copy
workqueue. This will also help distinguish this data structure from
software data structures that can be introduced.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-5-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Add and improve log messages

Add link related log messages in fnic_fcs.c,
Improve log message in fnic_fcs.c,
Add log message in vnic_dev.c.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-4-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Add and use fnic number

Add fnic_num in fnic.h to identify fnic in a multi-fnic environment.
Increment and set the fnic number during driver load in fnic_probe.
Replace the host number with fnic number in debugfs.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20231211173617.932990-3-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Fix sg_reset success path

sg_reset performs a target or LUN reset. Since the command is issued by the
user, it does not come into the driver with a tag or a queue id. Fix the
fnic driver to create an io_req and use a SCSI command tag. Fix the ITMF
path to special case the sg_reset response.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20230919182436.6895-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Declare host template const

Make it explicit that the SCSI host template is not modified.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-37-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Refactor code in fnic probe to initialize SCSI layer

Refactor code from fnic probe into a different function so that
scsi layer initialization code is grouped together.
Also, add log messages for better debugging.

Link: https://lore.kernel.org/r/20220707205155.692688-1-kartilak@cisco.com
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)

Based on the normalized pattern:

this program is free software you may redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 of the license the software is
provided as is without warranty of any kind express or implied
including but not limited to the warranties of merchantability fitness
for a particular purpose and noninfringement in no event shall the
authors or copyright holders be liable for any claim damages or other
liability whether in an action of contract tort or otherwise arising
from out of or in connection with the software or the use or other
dealings in the software

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fnic: Replace DMA mask of 64 bits with 47 bits

Cisco VIC supports only 47 bits. If the host sends DMA addresses that are
greater than 47 bits, it causes work queue (WQ) errors in the VIC.

Link: https://lore.kernel.org/r/20220513205605.81788-1-kartilak@cisco.com
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Co-developed-by: Dhanraj Jhawar <djhawar@cisco.com>
Signed-off-by: Dhanraj Jhawar <djhawar@cisco.com>
Co-developed-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove unneeded flush_workqueue()

All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.

Link: https://lore.kernel.org/r/20220424065406.3228528-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-23-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Switch to attribute groups

struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.

Link: https://lore.kernel.org/r/20211012233558.4066756-20-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove unnecessary spin_lock_init() and INIT_LIST_HEAD()

The spinlock and list head of fnic_list are initialized statically. It is
unnecessary to initialize them.

Link: https://lore.kernel.org/r/20210330125911.1050879-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Fix error return code in fnic_probe()

Return a negative error code from the error handling case instead of 0 as
done elsewhere in this function.

Link: https://lore.kernel.org/r/1607068060-31203-1-git-send-email-zhangchangzhong@huawei.com
Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Avoid looping in TRANS ETH on unload

Avoid looping in fnic_scsi_abort_io() before sending fw reset when fnic is
in TRANS ETH state and when we have not received any link events.

Link: https://lore.kernel.org/r/20201121012145.18522-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove unneeded semicolon

This addresses the following coccinelle warning:

drivers/scsi/fnic/fnic_main.c:446:2-3: Unneeded semicolon

Link: https://lore.kernel.org/r/20200911091057.2938685-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove set but not used 'old_vlan'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_main.c: In function ‘fnic_set_vlan’:
drivers/scsi/fnic/fnic_main.c:555:6: warning: variable ‘old_vlan’ set
but not used [-Wunused-but-set-variable]
555 | u16 old_vlan;
| ^~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: make fnic_list and fnic_list_lock static

Fix the following sparse warning:

drivers/scsi/fnic/fnic_main.c:52:1: warning: symbol 'fnic_list' was not
declared. Should it be static?
drivers/scsi/fnic/fnic_main.c:53:1: warning: symbol 'fnic_list_lock' was
not declared. Should it be static?

Link: https://lore.kernel.org/r/20200415093809.9365-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the return
value. The function can work or not, but the code logic should never do
something different based on this.

Cc: Satish Kharat <satishkh@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Enable fnic devcmd2 interface

This patch adds changes to check if fnic devcmd2 interface is exported by
the firmware. If devcmd2 interfaces is exported, driver starts using it
else falls back to fnic devcmd1 interface.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Impose upper limit on max. # of CQs processed per intr

Impose an upper limit on the max number of CQ entries (corresponding to the
copy wq) processed in an interrupt. Use module parameter to set the limit.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: RQ enable and then post descriptors

Do RQ enable before posting descriptor. This is needed for later hw
revisions.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: delaying vnic dev enable till after req intr

Doing vnic_device_enable before this could cause interrupts to happen
before they are setup.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: support to display 20G port speed

This patch is to add fnic 20G port speed display in sysfs.

[mkp: typo]

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: flip the default on use_clustering

Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: switch to generic DMA API

Switch from the legacy PCI DMA API to the generic DMA API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

treewide: setup_timer() -> timer_setup()

This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

void my_callback(unsigned long data)
{
struct something *ptr = (struct something *)data;
...
}
...
setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

void my_callback(struct something *ptr)
{
...
}
...
setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

void my_callback(struct timer_list *t)
{
struct something *ptr = from_timer(ptr, t, my_timer);
...
}
...
timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

void my_callback(unsigned long data)
{
struct something *ptr = (struct something *)data;
...
}
...
ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

void my_callback(struct timer_list *t)
{
struct something *ptr = from_timer(ptr, t, my_timer);
...
}
...
ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

void my_callback(unsigned long data)
{
...
}
...
setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

void my_callback(struct timer_list *unused)
{
...
}
...
timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

setup_timer(
-&(e)
+&e
, ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
_E->_timer@_stl.function = _callback;
|
_E->_timer@_stl.function = &_callback;
|
_E->_timer@_stl.function = (_cast_func)_callback;
|
_E->_timer@_stl.function = (_cast_func)&_callback;
|
_E._timer@_stl.function = _callback;
|
_E._timer@_stl.function = &_callback;
|
_E._timer@_stl.function = (_cast_func)_callback;
|
_E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

void _callback(
-_origtype _origarg
+struct timer_list *t
)
{
(
... when != _origarg
_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
)
}

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
depends on change_timer_function_usage &&
!change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

void _callback(
-_origtype _origarg
+struct timer_list *t
)
{
+ _handletype *_origarg = from_timer(_origarg, t, _timer);
+
... when != _origarg
- (_handletype *)_origarg
+ _origarg
... when != _origarg
}

// Avoid already converted callbacks.
@match_callback_converted
depends on change_timer_function_usage &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

void _callback(struct timer_list *t)
{ ... }

// callback(struct something *handle)
@change_callback_handle_arg
depends on change_timer_function_usage &&
!match_callback_converted &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

void _callback(
-_handletype *_handle
+struct timer_list *t
)
{
+ _handletype *_handle = from_timer(_handle, t, _timer);
...
}

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
depends on change_timer_function_usage &&
change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

void _callback(struct timer_list *t)
{
- _handletype *_handle = from_timer(_handle, t, _timer);
}

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
depends on change_timer_function_usage &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg &&
!change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
depends on change_timer_function_usage &&
(change_callback_handle_cast ||
change_callback_handle_cast_no_arg ||
change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
_E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
depends on change_timer_function_usage &&
(change_callback_handle_cast ||
change_callback_handle_cast_no_arg ||
change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

_callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
)

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

void _callback(
-_origtype _origarg
+struct timer_list *unused
)
{
... when != _origarg
}

Signed-off-by: Kees Cook <keescook@chromium.org>

scsi: fnic: correct speed display and add support for 25,40 and 100G

Setting speed based on the vinc device parameter read during
linkup. Also adding support to display 25,40 and 100G

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: remove eh_timed_out methods in the transport template

Instead define the timeout behavior purely based on the host_template
eh_timed_out method and wire up the existing transport implementations
in the host templates. This also clears up the confusion that the
transport template method overrides the host template one, so some
drivers have to re-override the transport template one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: use host wide tags by default

This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags. We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

scsi: remove ->change_queue_type method

Since we got rid of ordered tag support in 2010 the prime use case of
switching on and off ordered tags has been obsolete. The other function
of enabling/disabling tagging entirely has only been correctly implemented
by the 53c700 driver and isn't generally useful.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>

scsi: drop reason argument from ->change_queue_depth

Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>

scsi: avoid ->change_queue_depth indirection for queue full tracking

All drivers use the implementation for ramping the queue up and down, so
instead of overloading the change_queue_depth method call the
implementation diretly if the driver opts into it by setting the
track_queue_depth flag in the host template.

Note that a few drivers validated the new queue depth in their
change_queue_depth method, but as we never go over the queue depth
set during slave_configure or the sysfs file this isn't nessecary
and can safely be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>

Fnic: Not probing all the vNICS via fnic_probe on boot

In fnic_dev_wait, Wait for finish to complete at least three times in two
seconds while loop before returning -ETIMEDOUT as sometime
schedule_timeout_uninterruptible takes more than two seconds to wake up.

- Increment fnic version from 1.6.0.11 to 1.6.0.12

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: don't force tagged_supported in drivers

Now that we also get proper values in cmd->request->tag for untagged
commands, there is no need to force tagged_supported to on in drivers
that need host-wide tags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>

scsi: don't set tagging state from scsi_adjust_queue_depth

Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth. For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway. The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: always assign block layer tags if enabled

Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq. This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>

scsi: provide a generic change_queue_type method

Most drivers use exactly the same implementation, so provide it as a
library function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>

fnic: fnic Control Path Trace Utility

Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic
driver to trace the control path frames like discovery, FLOGI request/reply,
PLOGI request/reply, link event etc. It will be one trace file for all fnics.
It will help us to debug and resolve the discovery and initialization related
issues in more convenient way. This trace information includes time stamp,
Host Number, Frame type, Frame Length and Frame. By default,64 pages are
allocated but we can change the number of allocated pages by module parameter
fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are
depends on allocated number of pages. We can turn on or off the fnic control
path trace functionality by module paramter fc_trace_enable and/or reset the
trace contain by module paramter fc_trace_clear.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle count

This patch contains following three minor fixes.

1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not
expected, setting the internal fip state to Non FIP mode explicitly, avoids
sending FIP frame.

2) When target goes offline, all outstanding IOs belong to the target will be
terminated by driver, If the termination count is high, then it influences
firmware responsiveness. To improve the responsiveness, default IO throttle
count is reduced to 256.

3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF)
is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to
receiving flogi reject from switch. As CVL clears all FCFs.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Anantha Tungarakodi <atungara@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

[SCSI] fnic: Fnic Statistics Collection

This feature gathers active and cumulative per fnic stats for io,
abort, terminate, reset, vlan discovery path and it also includes
various important stats for debugging issues. It also provided
debugfs and ioctl interface for user to retrieve these stats.
It also provides functionality to reset cumulative stats through
user interface.

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

SCSI: remove unnecessary pci_set_drvdata()

Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

[SCSI] fnic: fnic Driver Tuneables Exposed through CLI

Introduced module params to provide dynamic way of configuring
queue depth.

Added support to get max io throttle count through UCSM to
configure maximum outstanding IOs supported by fnic and push
that value to scsi mid-layer.

Supported IO throttle values:

UCSM IO THROTTLE VALUE FNIC MAX OUTSTANDING IOS
------------------------------------------------------
16 (Default) 2048
<= 256 256
> 256 <ucsm value>

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up

Issue was seen when SCSI buffer address is more than 40 bits in system
with more than 1.1TB RAM. When SCSI buffer is passed to VIC, it is failing
to map to correct buffer address, as DMA mask is set to 40 bits in driver
initialization. Corrected DMA_MASK from 40-bits to 64-bits to avoid masking
41-64 bits addresses.

Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: FC stat param seconds_since_last_reset not getting updated

Code to reset fc_host statistics.
echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats,
the code also issues command to fnic firmware to clear vnic stats.

Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: BUG: sleeping function called from invalid context during probe

I hit this during driver probe with the latest fnic updates (this trace
is from a backport into a distro kernel, but the issue is the same).

> BUG: sleeping function called from invalid context at mm/slab.c:3113
> in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu
> INFO: lockdep is turned off.
> irq event stamp: 0
> hardirqs last enabled at (0): [<(null)>] (null)
> hardirqs last disabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last enabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last disabled at (0): [<(null)>] (null)
> Pid: 610, comm: work_for_cpu Not tainted
> Call Trace:
> [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0
> [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130
> [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0
> [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
> [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
> [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic]
> [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic]
> [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30
> [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20
> [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30
> [<ffffffff8109cdc6>] ? kthread+0x96/0xa0
> [<ffffffff8100c1ca>] ? child_rip+0xa/0x20
> [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40
> [<ffffffff8100bb10>] ? restore_args+0x0/0x30
> [<ffffffff8109cd30>] ? kthread+0x0/0xa0
> [<ffffffff8100c1c0>] ? child_rip+0x0/0x20

The problem is in this hunk of "FIP VLAN Discovery Feature Support"
(d3c995f1dcf938f1084388d92b8fb97bec366566)

create_singlethreaded_workqueue cannot be called with irqs disabled

@@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev
*pdev,
vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
+ fnic->set_vlan = fnic_set_vlan;
fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO);
+ setup_timer(&fnic->fip_timer, fnic_fip_notify_timer,
+ (unsigned long)fnic);
+ spin_lock_init(&fnic->vlans_lock);
+ INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame);
+ INIT_WORK(&fnic->event_work, fnic_handle_event);
+ skb_queue_head_init(&fnic->fip_frame_queue);
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ if (!fnic_fip_queue) {
+ fnic_fip_queue =
+ create_singlethread_workqueue("fnic_fip_q");
+ if (!fnic_fip_queue) {
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+ printk(KERN_ERR PFX "fnic FIP work queue "
+ "create failed\n");
+ err = -ENOMEM;
+ goto err_out_free_max_pool;
+ }
+ }
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+ INIT_LIST_HEAD(&fnic->evlist);
+ INIT_LIST_HEAD(&fnic->vlans);
} else {
shost_printk(KERN_INFO, fnic->lport->host,
"firmware uses non-FIP mode\n");

The attempts to make fnic_fip_queue a single instance for the driver
while it's being created in probe look awkward anyway, why is this not
created in fnic_init_module like the event workqueue?

Signed-off-by: Chris Leech <cleech@redhat.com>
Tested-by: Anantha Tungarakodi <atungara@cisco.com>
Acked-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: FIP VLAN Discovery Feature Support

FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.

If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.

An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.

The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.

All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.

Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN. Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.

[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release. Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.

[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: Anantha Prakash T <atungara@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: Fnic Trace Utility

Fnic Trace utility is a tracing functionality built directly into fnic driver
to trace events. The benefit that trace buffer brings to fnic driver is the
ability to see what it happening inside the fnic driver. It also provides the
capability to trace every IO event inside fnic driver to debug panics, hangs
and potentially IO corruption issues. This feature makes it easy to find
problems in fnic driver and it also helps in tracking down strange bugs in a
more manageable way. Trace buffer is shared across all fnic instances for
this implementation.

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: fixing issues in device and firmware reset code

1. Handling overlapped firmware resets
This fix serialize multiple firmware resets to avoid situation where fnic
device fails to come up for link up event, when firmware resets are issued
back to back. If there are overlapped firmware resets are issued,
the firmware reset operation checks whether there is any firmware reset in
progress, if so it polls for its completion in a loop with 100ms delay.

2. Handling device reset timeout
fnic_device_reset code has been modified to handle Device reset timeout:
- Issue terminate on device reset timeout.
- Introduced flags field (one of the scratch fields in scsi_cmnd).
With this, device reset request would have DEVICE_RESET flag set for other
routines to determine the type of the request.
Also modified fnic_terminate_rport_io, fnic_rport_exch_rset, completion
routines to handle SCSI commands with DEVICE_RESET flag.

3. LUN/Device Reset hangs when issued through IOCTL using utilities like
sg_reset.
Each SCSI command is associated with a valid tag, fnic uses this tag to
retrieve associated scsi command on completion. the LUN/Device Reset issued
through IOCTL resulting into a SCSI command that is not associated with a
valid tag. So fnic fails to retrieve associated scsi command on completion,
which causes hang. This fix allocates tag, associates it with the
scsi command and frees the tag, when the operation completed.

4. Preventing IOs during firmware reset.
Current fnic implementation allows IO submissions during firmware reset.
This fix synchronizes IO submissions and firmware reset operations.
It ensures that IOs issued to fnic prior to reset will be issued to the
firmware before firmware reset.

Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Drivers: scsi: remove __dev* attributes.

CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[SCSI] fnic: fix incorrect use of SLAB_CACHE_DMA flag

Driver was incorrectly using the SLAB_CACHE_DMA flag when creating a cache
for SGLs. fnic device does not have 24-bit DMA restrictions. Remove the flag
and allocations from ZONE_DMA.

Thanks to Roland Dreier and David Rientjes for pointing out the bug.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

[SCSI] fnic: prep for fc host dev loss tmo support

This removes the driver's get_host_def_dev_loss_tmo
callback and just has the driver set the dev loss
using the fc class fc_host_dev_loss_tmo macro like is
done for other fc params.

This also adds a set rport dev loss function so the
fc class host dev loss tmp sysfs support being added
in the fc class patch can update rports.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: do not reset dev_loss_tmo in slave callout

This fixes a bug where the driver was resetting the
rport dev_loss_tmo when devices were added by adding
support for the get_host_def_dev_loss_tmo callout.

Patch has only been compile tested.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint support

The FC-BB-6 committee is proposing a new FIP usage model called
VN_port to VN_port mode. It allows VN_ports to discover each other
over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric
services. This is point-to-multipoint. There is also a variant
of this called point-to-point which provides for making sure there
is just one pair of ports operating over the Ethernet fabric.

We add these new states: VNMP_START, _PROBE1, _PROBE2, _CLAIM, and _UP.
These usually go quickly in that sequence. After waiting a random
amount of time up to 100 ms in START, we select a pseudo-random
proposed locally-unique port ID and send out probes in states PROBE1
and PROBE2, 100 ms apart. If no probe responses are heard, we
proceed to CLAIM state 400 ms later and send a claim notification.
We wait another 400 ms to receive claim responses, which give us
a list of the other nodes on the network, including their FC-4
capabilities. After another 400 ms we go to VNMP_UP state and
should start interoperating with any of the nodes for whic we
receivec claim responses. More details are in the spec.j

Add the new mode as FIP_MODE_VN2VN. The driver must specify
explicitly that it wants to operate in this mode. There is
no automatic detection between point-to-multipoint and fabric
mode, and the local port initialization is affected, so it isn't
anticipated that there will ever be any such automatic switchover.

It may eventually be possible to have both fabric and VN2VN
modes on the same L2 network, which may be done by two separate
local VN_ports (lports).

When in VN2VN mode, FIP replaces libfc's fabric-oriented discovery
module with its own simple code that adds remote ports as they
are discovered from incoming claim notifications and responses.
These hooks are placed by fcoe_disc_init().

A linear list of discovered vn_ports is maintained under the
fcoe_ctlr struct. It is expected to be short for now, and
accessed infrequently. It is kept under RCU for lock-ordering
reasons. The lport and/or rport mutexes may be held when we
need to lookup a fcoe_vnport during an ELS send.

Change fcoe_ctlr_encaps() to lookup the destination vn_port in
the list of peers for the destination MAC address of the
FIP-encapsulated frame.

Add a new function fcoe_disc_init() to initialize just the
discovery portion of libfcoe for VN2VN mode.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify mode

There are three modes that libfcoe currently supports, and a new one
is coming. Change the fcoe_ctlr_init() interface to add the mode
desired. This should not change any functionality.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.

No reason to restrict CDB size to 12 bytes in fcoe, so
increased to 16 so that 16 bytes SCSI CDB doesn't fail.

Uses common define to set max_cmd_len for fcoe and fnic,
fnic is already setting max_cmd_len to 16.

sg_readcap -l fails without this fix.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

[SCSI] fnic: lport stats need to be initialized in fnic_probe()

Incorrect initialization of lport stats in fnic_probe() causes fnic to
crash at bootup and a node hang if fip is enabled and all links are brought
up after fnic is loaded.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: Allow multicast and unicast address registrations for fnic

To enable FIP support in fnic, we have to register with hardware to receive
FIP solication frames on a well-known multicast address.
Before FIP support, the firmware interface allowed multicast address
registrations only for enic devices. This is a minor change in fnic to
allow the firmware interface to now register mcast addresses for fnic too.

Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Herman Lee <hermlee@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: enable bsg pass-thru for fcping

Add initialization of .bsg_request in the scsi_transport_fc
template so that fcping works.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: Add FIP support to the fnic driver

Use libfcoe as a common FIP implementation with fcoe.
FIP or non-FIP mode is fully automatic if the firmware
supports and enables it.

Even if FIP is not supported, this uses libfcoe for the non-FIP
handling of FLOGI and its response.

Use the new lport_set_port_id() notification to capture
successful FLOGI responses and port_id resets.

While transitioning between Ethernet and FC mode, all rx and
tx FC frames are queued. In Ethernet mode, all frames are
passed to the exchange manager to capture FLOGI responses.

Change to set data_src_addr to the ctl_src_addr whenever it
would have previously been zero because we're not logged in.
This seems safer so we'll never send a frame with a 0 source MAC.
This also eliminates a special case for sending FLOGI frames.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] libfc: changes to libfc_host_alloc to consolidate initialization with allocation

I'd like to keep basic initialization together with allocation, which means
this can't just be a tail-call to scsi_host_alloc.

This is needed to create a generic libfc host allocation routine for NPIV
VN_Ports, which will share the exchange ID space (through sharing exchange
manager structures) with the parent lport. In order to clone the exchange
manager list when the lport is allocated, the list head must be initialized
earlier.

Also, update fnic to use the libfc_host_alloc so that later changes do not break
it. (contribution by Joe Eykholt)

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: Allocate OS interrupt resources just before enabling interrupts

The OS interrupt vectors were getting allocated before the interrupt
resources were mapped from hardware. For Legacy interrupts, since
they are shared with other devices, as soon as an interrupt is
registered with the OS, it can fire while the fnic isr resource is
still unmapped. This can cause crash because of access to unmapped resources.
For MSIX and MSI, since interrupts are not shared with other devices,
this problem didnt happen, because the interrupt is enabled as the last
step before returning from _probe. For Legacy however, since the
interrupt is shared, the handler can be called as soon as it is registered.

Solution is to register interrupt handlers with OS as last step before
enabling device interrupts.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: Set max_cmd_len to driver supported CDB length

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fcoe, fnic, libfc: modifies current code paths to use EM anchor list

Modifies current code to use EM anchor list in EM allocation, EM free,
EM reset, exch allocation and exch lookup code paths.

1. Modifies fc_exch_mgr_alloc to accept EM match function and then
have allocated EM added to the lport using fc_exch_mgr_add API
while also updating EM kref for newly added EM.

2. Updates fc_exch_mgr_free API to accept only lport pointer instead
EM and then have this API free all EMs of the lport from EM anchor
list.

3. Removes single lport pointer link from the EM, which was used in
associating lport pointer in newly allocated exchange. Instead have
lport pointer passed along new exchange allocation call path and
then store passed lport pointer in newly allocated exchange, this
will allow a single EM instance to be used across more than one
lport and used in EM reset to reset only lport specific exchanges.

4. Modifies fc_exch_mgr_reset to reset all EMs from the EM anchor list
of the lport, adds additional exch lport pointer (ep->lp) check for
shared EM case to reset exchange specific to a lport requested reset.

5. Updates exch allocation API fc_exch_alloc to use EM anchor list and
its anchor match func pointer. The fc_exch_alloc will walk the list
of EMs until it finds a match, a match will be either null match
func pointer or call to match function returning true value.

6. Updates fc_exch_recv to accept incoming frame on local port using
only lport pointer and frame pointer without specifying EM instance
of incoming frame. Instead modified fc_exch_recv to locate EM for the
incoming frame by matching xid of incoming frame against a EM xid range.
This change was required to use EM list in libfc Rx path and after this
change the lport fc_exch_mgr pointer emp is not needed anymore, so
removed emp pointer.

7. Updates fnic for removed lport emp pointer and above modified libfc APIs
fc_exch_recv, fc_exch_mgr_alloc and fc_exch_mgr_free.

8. Removes exch_get and exch_put from libfc_function_template as these
are no longer needed with EM anchor list and its match function use.
Also removes its default function fc_exch_get.

A defect this patch introduced regarding the libfc initialization order in
the fnic driver was fixed by Joe Eykholt <jeykholt@cisco.com>.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] fnic: use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK

Robert Love reported warning while building fnic_main.c:
drivers/scsi/fnic/fnic_main.c:478: warning: `DMA_nnBIT_MASK' is deprecated.

Replaced use of DMA_nnBIT_MASK by DMA_BIT_MASK(nn)

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] libfc,fcoe,fnic: Separate rport and lport max retry counts

This allows fnic to configure number of retries for lport and rport
separately.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA

fnic is a driver for the Cisco PCI-Express FCoE HBA

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>