s390/ctlreg: add struct ctlreg

Add struct ctlreg to enforce strict type checking / usage for control
register functions.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/ctlreg: use local_ctl_load() and local_ctl_store() where possible

Convert all single control register usages of __local_ctl_load() and
__local_ctl_store() to local_ctl_load() and local_ctl_store().

This also requires to change the type of some struct lowcore members
from __u64 to unsigned long.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/ctlreg: add local and system prefix to some functions

Add local and system prefix to some functions to clarify they change
control register contents on either the local CPU or the on all CPUs.

This results in the following API:

Two defines which load and save multiple control registers.
The defines correlate with the following C prototypes:

void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high);
void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high);

Two functions which locally set or clear one bit for a specified
control register:

void local_ctl_set_bit(unsigned int cr, unsigned int bit);
void local_ctl_clear_bit(unsigned int cr, unsigned int bit);

Two functions which set or clear one bit for a specified control
register on all CPUs:

void system_ctl_set_bit(unsigned int cr, unsigned int bit);
void system_ctl_clear_bit(unsigend int cr, unsigned int bit);

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/ctlreg: rename ctl_reg.h to ctlreg.h

Rename ctl_reg.h to ctlreg.h so it matches not only ctlreg.c but also
other control register related function, union, and structure names,
which all come with a ctlreg prefix.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/ctlreg: move control register code to separate file

Control register handling has nothing to do with low level SMP code.
Move it to a separate file.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/boot: rename mem_detect to physmem_info

In preparation to extending mem_detect with additional information like
reserved ranges rename it to more generic physmem_info. This new naming
also help to avoid confusion by using more exact terms like "physmem
online ranges", etc.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/sclp: introduce sclp_emergency_printk()

Introduce sclp_emergency_printk() which can be used to emit a message
in emergency cases. sclp_emergency_printk() is only supposed to be
used in cases where it can be assumed that regular console device
drivers may not work anymore.
For example this may be the case for unrecoverable machine checks.

Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/sclp: keep sclp_early_sccb

Keep sclp_early_sccb so it can also be used after initdata has been
freed. This is a prerequisite to allow printing a message from the
machine check handler.

Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/boot: move sclp early buffer from fixed address in asm to C

To make the decompressor relocatable, the early SCLP buffer with a fixed
address must be replaced with a relocatable C buffer of the according size
and alignment as required by SCLP.

Introduce a new function sclp_early_set_buffer() into the SCLP driver
which enables the decompressor to change the SCLP early buffer at any time.
This will be useful when the decompressor becomes fully relocatable and
might need to change the SCLP early buffer to one with an address < 2G
as required by SCLP because it was loaded at an address >= 2G.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/sclp: use only one sclp early buffer to send commands

A buffer that can be used for communication with SCLP is required
to lie below 2GB memory address. Therefore, both sclp_info_sccb
and sclp_early_sccb must fulfill this requirement if passed directly
to the sclp_early_cmd() function. Instead, use only sclp_early_sccb
for communication with SCLP. This allows the buffer sclp_info_sccb
to be placed anywhere in the memory address space and, therefore,
simplifies the process of making the decompressor relocatable later on,
one thing less to relocate. And make sure that the length of the new unified
early SCLP buffer is no less than the length of the removed sclp_info_sccb
buffer which might be larger than the length of the sclp_early_sccb buffer.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: Use arch_local_irq_{save,restore}() in early boot code

Commit 997acaf6b4b5 ("lockdep: report broken irq restoration") makes
compiling s390 fail because the irq enable/disable functions are now
no longer fully contained in header files.

Fixes: 997acaf6b4b5 ("lockdep: report broken irq restoration")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>

s390/sclp: provide extended sccb support

As the number of cpus increases, the sccb response can exceed 4k for
read cpu and read scp info sclp commands. Hence, all cpu info entries
cant be embedded within a sccb response

Solution:
To overcome this limitation, extended sccb facility is provided by sclp.

1. Check if the extended sccb facility is installed.
2. If extended sccb is installed, perform the read scp and read cpu
command considering a max sccb length of three page size. This max
length is based on factors like max cpus, sccb header.
3. If extended sccb is not installed, perform the read scp and read cpu
sclp command considering a max sccb length of one page size.

Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/sclp: avoid copy of sclp_info_sccb

For extended sccb support, sccb size could be up to 3 pages. Hence avoid
copy of sclp_info_sccb.

Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/sclp: remove unused sclp_early_printk_forced

This reverts commit 55a5542a5462 ("s390/hibernate: fix error handling when
suspend cpu != resume cpu"). It added sclp_early_printk_force() which
is no longer used since commit 394216275c7d ("s390: remove broken
hibernate / power management support"). No hibernate - no problem.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/sclp: clean up unneeded .data section usage

Since commit 980d5f9ab36b ("s390/boot: enable .bss section for compressed
kernel") .bss section usage is no longer restricted. .bss section is a
part of the decompressor's image and is zeroed by the linker. For that
reason clean up now unneeded .data section usage.

Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/sclp: do not use static sccbs

The sccbs for init/read/sdias/early have to be located below 2 GB, and
they are currently defined as a static buffer.

With a relocatable kernel that could reside at any place in memory, this
will no longer guarantee the location below 2 GB, so use a dynamic
GFP_DMA allocation instead.

The sclp_early_sccb buffer needs special handling, as it can be used
very early, and by both the decompressor and also the decompressed
kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the
former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is
renamed to HEAD_END, as it is rather the end of head.S and not the end
of the parmarea.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: introduce sclp_early_get_hsa_size

Introduce sclp_early_get_hsa_size function to be used during early
memory detection. This function allows to find a memory limit imposed
during zfcpdump.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mem_detect: replace tprot loop with binary search

In a situation when other memory detection methods are not available
(no SCLP and no z/VM diag260), continuous online memory is assumed.
Replacing tprot loop with faster binary search, as only online memory
end has to be found.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mem_detect: introduce SCLP storage info

SCLP storage info allows to detect continuous and non-continuous online
memory under LPAR, z/VM and KVM, when standby memory is defined.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/mem_detect: move tprot loop to early boot phase

Move memory detection to early boot phase. To store online memory
regions "struct mem_detect_info" has been introduced together with
for_each_mem_detect_block iterator. mem_detect_info is later converted
to memblock.

Also introduces sclp_early_get_meminfo function to get maximum physical
memory and maximum increment number.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: move sclp_early_read_info to sclp_early_core.c

To enable early online memory detection sclp_early_read_info has
been moved to sclp_early_core.c. sclp_info_sccb has been made a part
of .boot.data, which allows to reuse it later during early kernel
startup and make sclp_early_read_info call just once.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/hibernate: fix error handling when suspend cpu != resume cpu

The resume code checks if the resume cpu is the same as the suspend cpu.
If not, and if it is also not possible to switch to the suspend cpu, an
error message should be printed and the resume process should be stopped
by loading a disabled wait psw.

The current logic is broken in multiple ways, the message is never printed,
and the disabled wait psw never loaded because the kernel panics before that:
- sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break
on the first 64bit instruction in sclp_early_printk().
- The init stack should be used, but the stack pointer is not set up correctly
(missing aghi %r15,-STACK_FRAME_OVERHEAD).
- __sclp_early_printk() checks the sclp_init_state. If it is not
sclp_init_state_uninitialized, it simply returns w/o printing anything.
In the resumed kernel however, sclp_init_state will never be uninitialized.

This patch fixes those issues by removing the sam31/ESA logic, adding a
correct init stack pointer, and also introducing sclp_early_printk_force()
to allow using sclp_early_printk() even when sclp_init_state is not
uninitialized.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: avoid potential usage of uninitialized value

sclp_early_printk could be used before .bss section is zeroed
(i.e. from als.c during the decompressor phase), therefore values used
by sclp_early_printk should be located in the .data section.

Another reason for that is to avoid potential initrd corruption, if some
code in future would use sclp_early_printk before initrd is moved from
possibly overlapping with .bss section region to a safe location.

Fixes: 0b0d1173d8ae ("s390/sclp: 32 bit event mask compatibility mode")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: 32 bit event mask compatibility mode

Qemu before version 2.11 does not implement the architecture correctly,
and does not allow for a mask size of size different than 4.

This patch introduces a compatibility mode for such systems, forcing
the mask sizes to 4.

Since the mask size is currently still 4 anyway, this patch should have
no impact whatsoever by itself, but it will be needed when the mask size
is increased to 64 bits in the next patch.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: generic event mask accessors

Switch the layout of the event masks to be a generic buffer, and
implement accessors to retrieve the values of the masks.

This will be needed in the next patches, where we will eventually switch
the mask size to 64 bits.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: clean up, use sccb_mask_t where appropriate

Replace hardcoded instances where 32 or unsigned int (or long) is used
for SCLP event masks, and replace with sizeof(sccb_mask_t) and
sccb_mask_t respectively.

This improves readability and prepares for when we will increase
sccb_mask_t to 64 bits.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: fix .data section specification

"__section(data)" has to be "__section(.data)". __section(data)
produces extra "data" section in addition to ".data" section.

Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/sclp: get rid of common response code handling

Get rid of common response code handling. Each command requires its
own response code handling anyway. Also the retry in case of -EBUSY
does not work and can be simply removed.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: don't add new lines to each printed string

The early vt220 sclp printk code added an extra new line to each
printed multi-line text. If used for the early sclp console this will
lead to numerous extra new lines. Therefore get rid of this semantic
and require that each to be printed string contains a line feed
character if a new line is wanted.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: make early sclp code readable

This patch

- unifies the old sclp early code and the sclp early printk code, so
they can use common functions

- makes sure all sclp early functions and variables have the same
"sclp_early" prefix

- converts the sclp early printk code into readable code by using
existing data structures instead of hard coded magic arrays

- splits the early sclp code into two files: sclp_early.c and
sclp_early_core.c. The core file contains everything that is
required by the kernel decompressor and may not call functions not
contained within the core file. Otherwise the result would be a
link error.

- changes interrupt handling to be completely synchronous. The old
early sclp code had a small window which allowed to receive several
interrupts instead of exactly the single expected interrupt. This
did hide a subtle potential bug, which is fixed with this large
rework.

- contains a couple of small cleanups.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: disable early sclp code as soon as the base sclp driver is active

Make sure the early sclp code does not generate any sclp requests
anymore as soon as the base sclp driver is active. Otherwise both
drivers may see unexpected requests or may miss expected interrupts.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/sclp: move early printk code to drivers

Move the early sclp printk code to the drivers folder where also the
rest of the sclp code can be found. This way it is possible to use the
sclp private header files for further cleanups.

Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>