rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()

The XTOSCB bit is not bit 0, but xtosb_val is either 0 or 1. If it is 1,
test will never succeed. Fix this issue by using double negation.

While at it, remove unnecessary blank line from probe().

Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZN4BgzG2xmzOzdFZ@duo.ucw.cz/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/r/20230817161038.407960-1-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230724205456.767430-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Simplify probe()

Simplify the probe() by replacing of_device_get_match_data() and
i2c_match_id() by i2c_get_match_data() as we have similar I2C
and DT-based matching table.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230710114747.106496-1-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300

The built-in RTC found on PMIC RAA215300 is the same as ISL1208.
However, the external oscillator bit is inverted on PMIC version
0x11. The PMIC driver detects PMIC version and instantiates the
RTC device based on i2c_device_id.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230623140948.384762-11-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Add isl1208_set_xtoscb()

As per the HW manual, set the XTOSCB bit as follows:

If using an external clock signal, set the XTOSCB bit as 1 to
disable the crystal oscillator.

If using an external crystal, the XTOSCB bit needs to be set at 0
to enable the crystal oscillator.

Add isl1208_set_xtoscb() to set XTOSCB bit based on the clock-names
property. Fallback is enabling the internal crystal oscillator.

While at it, introduce a variable "sr" for reading the status register
in probe() as it is reused for writing and also remove the unnecessary
blank line.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230623140948.384762-10-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]

Drop enum isl1208_id and split the array isl1208_configs[] as individual
variables, and make lines shorter by referring to e.g. &config_isl1219
instead of &isl1208_configs[TYPE_ISL1219].

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230623140948.384762-9-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Make similar I2C and DT-based matching table

The isl1208_id[].driver_data could store a pointer to the config,
like for DT-based matching, making I2C and DT-based matching
more similar.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230623140948.384762-8-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Drop name variable

Drop unused name variable from struct isl1208_config.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230623140948.384762-7-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505121136.1185653-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Convert to .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221021130706.178687-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: do not advertise update interrupt feature if no interrupt specified

If an ISL1208 device does not have an interrupt line routed, the feature
shouldn't be advertised (it is by default in rtc core) or it'll confuse
userspace requesting that feature (such as hwclock from util-linux).

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220523145320.123713-1-foss+kernel@0leil.net

rtc: isl1208: quiet maybe-unused variable warning

When CONFIG_OF is disabled then the matching table is not referenced.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210202112219.3610853-9-alexandre.belloni@bootlin.com

rtc: rework rtc_register_device() resource management

rtc_register_device() is a managed interface but it doesn't use devres
by itself - instead it marks an rtc_device as "registered" and the devres
callback for devm_rtc_allocate_device() takes care of resource release.

This doesn't correspond with the design behind devres where managed
structures should not be aware of being managed. The correct solution
here is to register a separate devres callback for unregistering the
device.

While at it: rename rtc_register_device() to devm_rtc_register_device()
and add it to the list of managed interfaces in devres.rst. This way we
can avoid any potential confusion of driver developers who may expect
there to exist a corresponding unregister function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl

rtc: add devm_ prefix to rtc_nvmem_register()

rtc_nvmem_register() is a managed interface. It doesn't require any
release function to be called at driver detach. To avoid confusing
driver authors, let's rename it to devm_rtc_nvmem_register() and add it
to the list of managed interfaces in Documentation/.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201109163409.24301-6-brgl@bgdev.pl

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: isl1208: Add new style nvmem support to driver

Add support for the RTC's NVRAM using the standard nvmem support that is
part of the Linux RTC framework.

This driver already has a sysfs attribute that provides access to the
RTC's NVRAM as a single 16-bit value. Some chips have more than two
bytes of NVRAM, so this will not work for them. It's also non-standard.

This sysfs attribute is left in for backward compatibility, but will only
be able to read the first two bytes of NVRAM. The nvmem interface will
allow access to all NVRAM, e.g. eight bytes on the isl1218.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Support more chip variations

Add more support in the driver for dealing with differences in is1208
compatible chips. Put the 1208, 1209, 1218, and 1219 in the list and
encode information about nvram size, tamper, and timestamp features.

This adds support for the isl1209, which has a tamper detect but no
timestamp feature.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Introduce driver state struct

This driver has no state of its own, depending entirely on what is in
the generic rtc device.

Intoduce a state struct. For now it only contains a pointer to the rtc
device struct, but future patches will add more data.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: fix negative digital trim reporting

isl1208_i2c_get_dtr() was returning the dtr value directly, but could
also return a negative error code. Negative trimming values, e.g. -20,
would get interpreted as an error code, e.g. -ENOTDIR.

This patch offsets the dtr value by 100 so it's positive and won't alias
an error code.

Also fix check that considered a return value of -1 to be success.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Use i2c block read/write routines

The Linux i2c layer has functions to execute common SMBUS/I2C
transactions. The register access code here is identical to the I2C
read/write block data routines.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: don't include core header file

The core header file is reserved for the core, stop including it.

Also reorder includes alphabetically.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: avoid possible sysfs race

Use rtc_add_group to add the common sysfs group to avoid a possible race
condition.

[Denis.Osterland@diehl.com: use to_i2c_client(dev->parent)]
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The move of atrim, dtrim usr sysfs properties from i2c device
to rtc device require to access them via dev->parent.
This patch also aligns timestamp0.

rtc: isl1208: set ev-evienb bit from device tree

Add support to disable event in pull-up.

Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Add "evdet" interrupt source for isl1219

Add support for "evdet" named interrupt source.

The check if i2c client irq matches evdet irq is needed
for the case that there is only one interrupt named "evdet".
In this case i2c client code handles this like an unnamed
interrupt souce and assigns the value.

Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: add support for isl1219 with tamper detection

We add support for the ISL1219 chip that got an integrated tamper
detection function. This patch implements the feature by adding
an additional timestamp0 file to sysfs device path.
This file contains seconds since epoch, if an event occurred,
or is empty, if none occurred.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: switch to rtc_register_device

Fix possible race condition.
It is not allowed to return with an error code after RTC is registered.

Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: enable interrupt after context preparation

The interrupt handler got enabled very early. If the interrupt cause is
triggering immediately before the context is fully prepared. This can
lead to undefined behaviour. Therefor we move the interrupt enable code
to the end of the probe function.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Fix unintended clear of SR bits

After successful
sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
sr will be 0.
As a result
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
sr & ~ISL1208_REG_SR_WRTC);
is equal to
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, 0);
which clears all flags in SR.

Add an additional read of SR, to have value of SR in sr again.

Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

rtc: isl1208: Add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

rtc: remove useless DRV_VERSION

Many drivers are defining a DRV_VERSION. This is often only used for
MODULE_VERSION and sometimes to print an info message at probe time. This
is kind of pointless as they are all versionned with the kernel anyway.
Also the core will print a message when a new rtc is found.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

rtc: isl1208: Pass the IRQF_ONESHOT flag

Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

rtc: isl1208: Replace deprecated rtc_tm_to_time()

isl1208_i2c_set_alarm() uses deprecated rtc_tm_to_time(),
which will overflow in year 2106 on 32-bit machines.

This patch solves this by:
- Replacing rtc_tm_to_time() with rtc_tm_sub()

Cc: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

drivers/rtc/rtc-isl1208.c: use devm_* APIs

devm_* APIs are device managed and make code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-isl1208.c: remove redundant checks

i2c_smbus_read_byte_data() returns negative errno on failure. Return the
value obtained from it directly.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler

Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix misspellings of "whether" in comments.

"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/rtc/rtc-isl1208.c: convert struct i2c_msg initialization to C99 format

Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-isl1208.c: add support for the ISL1218

The ISL1218 chip is identical to the ISL1208, except that it has 6
additional user-storage registers. This patch does not enable access to
those additional registers, but only adds the chip name to the list.

Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: convert rtc i2c drivers to module_i2c_driver

Factor out some boilerplate code for i2c driver registration into
module_i2c_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Piotr Ziecik <kosmo@semihalf.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Roman Fietze <roman.fietze@telemotive.de>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Alexander Bigga <ab@mycable.de>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Byron Bradley <byron.bbradley@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-isl1208.c: add alarm support

Add alarm/wakeup support to rtc isl1208 driver

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-isl1208: use sysfs_{create/remove}_group

Instead of individually creating and removing the sysfs device attribute
files, wrap them in an attribute_group and use
sysfs_{create/remove}_group.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-isl1208: reject invalid dates

This patch for the rtc-isl1208 driver makes it reject invalid dates.

Signed-off-by: Chris Elston <celston@katalix.com>
[a.zummo@towertech.it: added comment explaining the check]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Hebert Valerio Riedel <hvr@gnu.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/: use bcd2bin/bin2bcd

Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-isl1208: fix double removal of a sysfs entry

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Hartley Sweeten <hartleys@visionengravers.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2c: Convert most new-style drivers to use module aliasing

Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>

i2c: Add support for device alias names

Based on earlier work by Jon Smirl and Jochen Friedrich.

This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jochen Friedrich <jochen@scram.de>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>

rtc-isl1208: new style conversion and minor bug fixes

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2c: normal_i2c can be made const (rtc drivers)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>

[PATCH] constify rtc_class_ops: update drivers

Update RTC framework so that drivers can constify their method tables, moving
them from ".data" to ".rodata". Then update the drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem, Add ISL1208 support

Add support for the I2C-attached Intersil ISL1208 RTC chip.

[akpm@osdl.org: cleanups, fixlets]
Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>