#
dedaf03b |
|
20-Nov-2023 |
Antoniu Miclaus <antoniu.miclaus@analog.com> |
rtc: max31335: add driver support RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with Integrated MEMS Resonator. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20231120120114.48657-2-antoniu.miclaus@analog.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
9f67c1e6 |
|
07-Nov-2023 |
Esteban Blanc <eblanc@baylibre.com> |
rtc: tps6594: Add driver for TPS6594 RTC TPS6594 PMIC is a MFD. This patch adds support for the RTC found inside TPS6594 family of PMIC. Alarm is also supported. Signed-off-by: Esteban Blanc <eblanc@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20231107094701.2223486-1-eblanc@baylibre.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
dc0684ad |
|
25-Sep-2023 |
Jacky Huang <ychuang3@nuvoton.com> |
rtc: Add driver for Nuvoton ma35d1 rtc controller The ma35d1 rtc controller provides real-time and calendar messaging capabilities. It supports programmable time tick and alarm match interrupts. The time and calendar messages are expressed in BCD format. This driver supports the built-in rtc controller of the ma35d1. It enables setting and reading the rtc time and configuring and reading the rtc alarm. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20230925070251.28-4-ychuang570808@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
ebf62558 |
|
13-Sep-2023 |
Romain Perier <romain.perier@gmail.com> |
rtc: Add support for the SSD202D RTC Newer SigmaStar SSD202D SoCs contain a Real Time Clock, capable of running while the system is sleeping (battery powered), this is not the case with the other RTC on older SoCs. This adds basic support for this RTC block. Signed-off-by: Romain Perier <romain.perier@gmail.com> Co-developed-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20230913151606.69494-2-romain.perier@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
1b733a9e |
|
02-Jun-2023 |
Binbin Zhou <zhoubinbin@loongson.cn> |
rtc: Add rtc driver for the Loongson family chips The Loongson family chips use an on-chip counter 0 (Time Of Year counter) as the RTC. We will refer to them as rtc-loongson. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Yang Ling <gnaygnil@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # LS7A Link: https://lore.kernel.org/r/0c5171156390f614d72f36ceb04a20f432ca639e.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
9fb23090 |
|
02-Jun-2023 |
Binbin Zhou <zhoubinbin@loongson.cn> |
rtc: Remove the Loongson-1 RTC driver Remove the ls1x-rtc driver as it is obsolete. We will continue to support the ls1x RTC in the upcoming Loongson unified RTC driver rtc-loongson. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: zhao zhang <zhzhl555@gmail.com> Cc: Yang Ling <gnaygnil@gmail.com> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/c38c666015a162d7031b20a48209ce577bab62cd.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
eb7b8585 |
|
14-Feb-2023 |
Jacky Bai <ping.bai@nxp.com> |
rtc: bbnsm: Add the bbnsm rtc support The BBNSM module includes a real time counter with alarm. Add a RTC driver for this function. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230215024117.3357341-3-ping.bai@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
6388bbad |
|
06-Oct-2022 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove v3020 driver The v3020 RTC driver was exclusively used by the now removed cm-x300.c machine. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-kernel@vger.kernel.org Cc: linux-rtc@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
fc457203 |
|
19-Oct-2022 |
Arnd Bergmann <arnd@arndb.de> |
mfd: Remove dm355evm_msp driver The DaVinci DM355EVM platform is gone after the removal of all unused board files, so the MTD device along with its sub-devices can be removed as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org
|
#
97e78b64 |
|
19-Oct-2022 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove davinci rtc driver The Davinci dm365 SoC support was removed, so the rtc driver has no remaining users. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20221019152947.3857217-9-arnd@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
5adbaed1 |
|
13-Jul-2022 |
Mia Lin <mimi05633@gmail.com> |
rtc: Add NCT3018Y real time clock driver Add real time clock support for NCT3018Y. Signed-off-by: Mia Lin <mimi05633@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220713090647.8028-4-mimi05633@gmail.com
|
#
2a692245 |
|
15-Jul-2022 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
rtc: vr41xx: remove driver Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220715135330.134684-1-tsbogend@alpha.franken.de
|
#
b09d6335 |
|
22-Jun-2022 |
Nishanth Menon <nm@ti.com> |
rtc: Introduce ti-k3-rtc Introduce support for Texas Instruments Real Time Clock controller on newer K3 family of SoCs such as AM62x. The hardware module that is being supported is the "digital only" version which doesn't have capability of external wakeup sources and external power backup. However, for many practical applications, this should suffice as RTC is operational across low power sequences. The hardware block by itself is split into two distinct domains internally to further reduce the power consumption with the actual counter block and comparators clocked off a 32k clock source (which based on SoC integration can be sourced by an external crystal) and an register interface block which is driven by the bus clock. While optimal from power perspective, it does create some complicated synchronizations and sequences that one must be wary of in the driver handling. Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220623170808.20998-3-nm@ti.com
|
#
0b31d703 |
|
01-Jun-2022 |
Conor Dooley <conor.dooley@microchip.com> |
rtc: Add driver for Microchip PolarFire SoC Add support for the built-in RTC on Microchip PolarFire SoC Co-Developed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220601123320.2861043-2-conor.dooley@microchip.com
|
#
deeb4b53 |
|
16-May-2022 |
Michel Pollet <michel.pollet@bp.renesas.com> |
rtc: rzn1: Add new RTC driver Add a basic RTC driver for the RZ/N1. Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220516082504.33913-3-miquel.raynal@bootlin.com
|
#
81c2f059 |
|
08-Mar-2022 |
Clément Léger <clement.leger@bootlin.com> |
rtc: optee: add RTC driver for OP-TEE RTC PTA This drivers allows to communicate with a RTC PTA handled by OP-TEE [1]. This PTA allows to query RTC information, set/get time and set/get offset depending on the supported features. [1] https://github.com/OP-TEE/optee_os/pull/5179 Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220308133505.471601-1-clement.leger@bootlin.com
|
#
fad6cbe9 |
|
03-Dec-2021 |
Vincent Shih <vincent.sunplus@gmail.com> |
rtc: Add driver for RTC in Sunplus SP7021 Add driver for RTC in Sunplus SP7021 Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1638517579-10316-2-git-send-email-vincent.sunplus@gamil.com
|
#
86559400 |
|
15-Dec-2021 |
Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> |
rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U These three consoles share a device, the MX23L4005, which contains a clock and 64 bytes of SRAM storage, and is exposed on the EXI bus (similar to SPI) on channel 0, device 1. This driver allows it to be used as a Linux RTC device, where time can be read and set. The hardware also exposes two timers, one which shuts down the console and one which powers it on, but these aren’t supported currently. On the Wii U, the counter bias is stored in a XML file, /config/rtc.xml, encrypted in the SLC (eMMC storage), using a proprietary filesystem. In order to avoid having to implement all that, this driver assumes a bootloader will parse this XML file and write the bias into the SRAM, at the same location the other two consoles have it. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-2-linkmauve@linkmauve.fr
|
#
005870f4 |
|
21-Oct-2021 |
Dmitry Osipenko <digetx@gmail.com> |
rtc: tps80031: Remove driver Driver was upstreamed in 2013 and never got a user, remove it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211021192258.21968-2-digetx@gmail.com
|
#
be7d9c91 |
|
23-Aug-2021 |
Daniel Palmer <daniel@0x0f.com> |
rtc: Add support for the MSTAR MSC313 RTC This adds support for the RTC block on the Mstar MSC313e SoCs and newer. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Co-developed-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210823171613.18941-3-romain.perier@gmail.com
|
#
b02c9646 |
|
10-Aug-2021 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: move RTC_LIB_KUNIT_TEST to proper location Move RTC_LIB_KUNIT_TEST under RTC_LIB so it is clear in the menu this is part of the RTC subsystem. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210810212008.631359-2-alexandre.belloni@bootlin.com
|
#
1d1bb12a |
|
24-Jun-2021 |
Cassio Neri <cassio.neri@gmail.com> |
rtc: Improve performance of rtc_time64_to_tm(). Add tests. The current implementation of rtc_time64_to_tm() contains unnecessary loops, branches and look-up tables. The new one uses an arithmetic-based algorithm appeared in [1] and is approximately 4.3 times faster (YMMV). The drawback is that the new code isn't intuitive and contains many 'magic numbers' (not unusual for this type of algorithm). However, [1] justifies all those numbers and, given this function's history, the code is unlikely to need much maintenance, if any at all. Add a KUnit test case that checks every day in a 160,000 years interval starting on 1970-01-01 against the expected result. Add a new config RTC_LIB_KUNIT_TEST symbol to give the option to run this test suite. [1] Neri, Schneider, "Euclidean Affine Functions and Applications to Calendar Algorithms". https://arxiv.org/abs/2102.06959 Signed-off-by: Cassio Neri <cassio.neri@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210624201343.85441-1-cassio.neri@gmail.com
|
#
435af897 |
|
24-Jan-2021 |
Jonathan Neuschäfer <j.neuschaefer@gmx.net> |
rtc: New driver for RTC in Netronix embedded controller With this driver, mainline Linux can keep its time and date in sync with the vendor kernel. Advanced functionality like alarm and automatic power-on is not yet supported. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
c5158358 |
|
17-Nov-2020 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
rtc: mrst: Remove driver for deprecated platform Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. The commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers we remove the support of outdated platforms completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
#
2f58f5ee |
|
20-Jan-2021 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove ste ab3100 driver The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210120154158.1860736-4-arnd@kernel.org
|
#
dd2d3b40 |
|
20-Jan-2021 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove ste coh901 driver The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210120154158.1860736-3-arnd@kernel.org
|
#
9d073551 |
|
20-Jan-2021 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove sirfsoc driver The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210120154158.1860736-2-arnd@kernel.org
|
#
446667df |
|
05-Jan-2021 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
rtc: tx4939: Remove driver CPU support for TX49xx is getting removed, so remove rtc driver for it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210105140305.141401-9-tsbogend@alpha.franken.de
|
#
33e62e83 |
|
06-Dec-2020 |
Thomas Gleixner <tglx@linutronix.de> |
ntp, rtc: Move rtc_set_ntp_time() to ntp code rtc_set_ntp_time() is not really RTC functionality as the code is just a user of RTC. Move it into the NTP code which allows further cleanups. Requested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201206220542.166871172@linutronix.de
|
#
2eeaa532 |
|
13-Oct-2020 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: rv3032: Add a driver for Microcrystal RV-3032 New driver for the Microcrystal RV-3032, including support for: - Date/time - Alarms - Low voltage detection - Trickle charge - Trimming - Clkout - RAM - EEPROM - Temperature sensor Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201013144110.1942218-3-alexandre.belloni@bootlin.com
|
#
fa4b9519 |
|
10-Jun-2020 |
Mike Rapoport <rppt@kernel.org> |
rtc: remove fb-puv3 driver The unicore32 port is removed from the kernel. There is no point to keep stale RTC driver for this architecture. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net>
|
#
540d1e15 |
|
20-Mar-2020 |
Andreas Kemnade <andreas@kemnade.info> |
rtc: rc5t619: Add Ricoh RC5T619 RTC driver Add an RTC driver for the RTC device on Ricoh MFD RC5T619, which is implemented as a variant of RN5T618. rtc-range output: Testing 2000-02-28 23:59:59. OK Testing 2038-01-19 03:14:07. OK Testing 2069-12-31 23:59:59. OK Testing 2099-12-31 23:59:59. KO RTC_RD_TIME returned 22 (line 138) Testing 2100-02-28 23:59:59. KO RTC_SET_TIME returned 34 (line 122) Testing 2106-02-07 06:28:15. KO RTC_SET_TIME returned 34 (line 122) Testing 2262-04-11 23:47:16. KO RTC_SET_TIME returned 34 (line 122) Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
f9b2a4d6 |
|
06-Nov-2019 |
Steve Muckle <smuckle@google.com> |
rtc: class: support hctosys from modular RTC drivers Due to distribution constraints it may not be possible to statically compile the required RTC driver into the kernel. Expand RTC_HCTOSYS support to cover all RTC devices (statically compiled or not) by checking at the end of RTC device registration whether the time should be synced. Signed-off-by: Steve Muckle <smuckle@google.com> Link: https://lore.kernel.org/r/20191106194625.116692-1-smuckle@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
64823360 |
|
25-Feb-2020 |
Ran Bi <ran.bi@mediatek.com> |
rtc: add support for the MediaTek MT2712 RTC This add support for the MediaTek MT2712 RTC. It was SoC based RTC, but had different architecture compared with MT7622 RTC. Signed-off-by: Ran Bi <ran.bi@mediatek.com> Link: https://lore.kernel.org/r/20200226051303.22560-3-ran.bi@mediatek.com Link: https://lore.kernel.org/r/20200316104701.209293-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
e5c3b1cc |
|
23-Jan-2020 |
Ard Biesheuvel <ardb@kernel.org> |
efi: Register EFI rtc platform device only when available Drop the separate driver that registers the EFI rtc on all EFI systems that have runtime services available, and instead, move the registration into the core EFI code, and make it conditional on whether the actual time related services are available. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
#
7b0b551d |
|
12-Aug-2019 |
Biwen Li <biwen.li@nxp.com> |
rtc: fsl-ftm-alarm: add FTM alarm driver For the platforms including LS1012A, LS1021A, LS1028A, LS1043A, LS1046A, LS1088A, LS208xA that has the FlexTimer module, implementing alarm functions within RTC subsystem to wakeup the system when system going to sleep (work with RCPM driver). Signed-off-by: Biwen Li <biwen.li@nxp.com> Link: https://lore.kernel.org/r/20190813030157.48590-1-biwen.li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
6ef35398 |
|
12-Aug-2019 |
Neil Armstrong <narmstrong@baylibre.com> |
rtc: Add Amlogic Virtual Wake RTC The Amlogic Meson GX SoCs uses a special register to store the time in seconds to wakeup after a system suspend. In order to be able to reuse the RTC wakealarm feature, this driver implements a fake RTC device which uses the system time to deduce a suspend delay. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: rebase to v5.3-rc, rework and modernization] Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
cb3cab06 |
|
09-Aug-2019 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove w90x900/nuc900 driver The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190809202749.742267-15-arnd@arndb.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
32a4a4eb |
|
03-Jun-2019 |
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
rtc: bd70528: Initial support for ROHM bd70528 RTC Support RTC block in ROHM bd70528 power management IC. Support getting and setting the time and date as well as arming an alarm which can also be used to wake the PMIC from standby state. HW supports wake interrupt only for the next 24 hours (sec, minute and hour information only) so we limit also the alarm interrupt to this 24 hours for the sake of consistency. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
184a182e |
|
26-Mar-2019 |
Joel Stanley <joel@jms.id.au> |
rtc: Add ASPEED RTC driver Read and writes the time to the non-battery backed RTC in the ASPEED BMC system on chip families. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
0d2f2a3d |
|
08-Feb-2019 |
Nick Crews <ncrews@chromium.org> |
platform/chrome: wilco_ec: Add RTC driver This Embedded Controller has an internal RTC that is exposed as a standard RTC class driver with read/write functionality. The driver is added to the drivers/rtc/ so that the maintainer of that directory will be able to comment on this change, as that maintainer is the expert on this system. In addition, the driver code is called indirectly after a corresponding device is registered from core.c, as opposed to core.c registering the driver callbacks directly. To test: > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Nick Crews <ncrews@chromium.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared] Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
#
67075b63 |
|
17-Feb-2019 |
Artem Panfilov <panfilov.artyom@gmail.com> |
rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar module with I2C interface. Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
e6e7376c |
|
12-Feb-2019 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: rv3028: add new driver Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock Module that incorporates an integrated CMOS circuit together with an XTAL. It has an i2c interface. The driver handles date/time, alarms, trickle charging, timestamping, frequency offset correction, EEPROM and NVRAM. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
d8fe6009 |
|
08-Feb-2019 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
rtc: support for the Amlogic Meson RTC Add support for the RTC block on the 32-bit Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs. The RTC is split in to two parts, which are both managed by this driver: - the AHB front end - and a simple serial connection to the actual registers The RTC_COUNTER register which holds the time is 32-bits wide. There are four 32-bit wide (in total: 16 bytes) "regmem" registers which are exposed using nvmem. On Amlogic's 3.10 kernel this is used to store data which needs to survive a suspend / resume cycle. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> [resurrected Ben's patches after 2 years] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
42986fb8 |
|
22-Jan-2019 |
Jan Kotas <jank@cadence.com> |
rtc: Add Cadence RTC driver This patch adds a driver for Cadence RTC controller. It can be enabled with RTC_DRV_CADENCE Kconfig option. It supports waking system from sleep modes. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
1d67a232 |
|
13-Dec-2018 |
Dianlong Li <long17.cool@163.com> |
rtc: sd3078: new driver. The sd3078 is a combination RTC and SRAM device with I2C interface. Signed-off-by: Dianlong Li <long17.cool@163.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
36e14f5f |
|
31-Dec-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: rename core files Rename core files so there is a clearer separation between the RTC core and the RTC drivers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
e01b5781 |
|
20-Dec-2018 |
Anson Huang <anson.huang@nxp.com> |
rtc: add i.MX system controller RTC support i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside, the system controller is in charge of controlling power, clock and secure rtc etc.. This patch adds i.MX system controller RTC driver support, Linux kernel has to communicate with system controller via MU (message unit) IPC to set/get RTC time and other alarm functions, since the RTC set time needs to be done in secure EL3 mode (required by system controller firmware) and alarm functions needs to be done with general MU IRQ handle, these depend on other components which are NOT ready, so this patch ONLY enables the RTC time read. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
db7a67b9 |
|
18-Sep-2018 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: reorder Makefile entries A few entries are not placed correctly, reorder them. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
111f7503 |
|
09-Mar-2018 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove bfin driver The blackfin architecture is getting removed, so this one is now obsolete. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
fca94ec6 |
|
09-Mar-2018 |
Arnd Bergmann <arnd@arndb.de> |
rtc: remove tile driver The tile architecture is getting removed, so this driver is no longer needed. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
4731a431 |
|
22-Feb-2018 |
David Daney <david.daney@cavium.com> |
rtc: isl12026: new driver. The ISL12026 is a combination RTC and EEPROM device with I2C interface. The standard RTC driver interface is provided. The EEPROM is accessed via the NVMEM interface. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
#
4402be2b |
|
18-Jan-2018 |
Corentin Labbe <clabbe.montjoie@gmail.com> |
rtc: remove rtc-at32ap700x Since PLATFORM_AT32AP is an AVR32 platform which was removed, the rtc driver rtc-at32ap700x is useless. This patch remove it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
83c880f7 |
|
17-Dec-2017 |
Patrick Bruenn <p.bruenn@beckhoff.com> |
rtc: add mxc driver for i.MX53 SRTC Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53. This is driver enables support for the low power domain SRTC features: - 32-bit MSB of non-rollover time counter - 32-bit alarm register Select the new config option RTC_DRV_MXC_V2 to build this driver Based on: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01 Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
6f2a71a3 |
|
10-Nov-2017 |
Stephen Barber <smbarber@chromium.org> |
rtc: cros-ec: add cros-ec-rtc driver. On platforms with a Chrome OS EC, the EC can function as a simple RTC. Add a basic driver with this functionality. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
495bbde5 |
|
08-Nov-2017 |
Baolin Wang <baolin.wang@spreadtrum.com> |
rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver This patch adds the Spreadtrum RTC driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
a9687aa2 |
|
01-Nov-2017 |
Eric Nelson <eric@nelint.com> |
rtc: add support for NXP PCF85363 real-time clock Note that alarms are not currently implemented. 64 bytes of nvmem is supported and exposed in sysfs (# is the instance number, starting with 0): /sys/bus/nvmem/devices/pcf85363-#/nvmem Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
ba5d0181 |
|
23-Oct-2017 |
Sean Wang <sean.wang@mediatek.com> |
rtc: mediatek: add driver for RTC on MT7622 SoC This patch introduces the driver for the RTC on MT7622 SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
ae930c91 |
|
04-Sep-2017 |
Andreas Färber <afaerber@suse.de> |
rtc: Add Realtek RTD1295 Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions. The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and Beelink Lake I. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
f22d9cdc |
|
18-Aug-2017 |
Miodrag Dinic <miodrag.dinic@mips.com> |
rtc: goldfish: Add RTC driver for Android emulator Add device driver for a virtual RTC device in Android emulator. The compatible string used by OS for binding the driver is defined as "google,goldfish-rtc". Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
697e5a47 |
|
06-Jul-2017 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: add generic nvmem support Many RTCs have an on board non volatile storage. It can be battery backed RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace and in-kernel consumers. This stays compatible with the previous (non documented) ABI that was using /sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about the deprecation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
1d61d259 |
|
30-May-2017 |
Linus Walleij <linus.walleij@linaro.org> |
rtc: gemini/ftrtc010: rename driver and symbols The Gemini RTC is actually a generic IP block from Faraday Technology names FTRTC010. Rename the driver file and all symbols to match this IP name. The relationship can be clearly seen in the U-Boot driver posted by Po-Yu Chuang for the Faraday A320 board: https://lists.denx.de/pipermail/u-boot/2009-September/061326.html Remove the dependency on ARCH_GEMINI but select the driver for ARCH_GEMINI so we get a smooth transition. The IP block is synthsized on different silicon and architectures. Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
c4f07ece |
|
26-Jun-2017 |
Brian Norris <computersforpeace@gmail.com> |
rtc: brcmstb-waketimer: Add Broadcom STB wake-timer This adds support for the Broadcom STB wake-timer which is a timer in the chip's 27Mhz clock domain that offers the ability to wake the system (wake-up source) from suspend states (S2, S3, S5). It is supported using the rtc framework allowing us to configure alarms for system wake-up. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
dd3bf50b |
|
01-Mar-2017 |
Sebastian Reichel <sre@kernel.org> |
rtc: cpcap: new rtc driver This driver supports the Motorola CPCAP PMIC found on some of Motorola's mobile phones, such as the Droid 4. Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
4e64350f |
|
11-Jan-2017 |
Amelie Delaunay <amelie.delaunay@st.com> |
rtc: add STM32 RTC driver This patch adds support for the STM32 RTC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
0b6a8f5c |
|
04-Dec-2016 |
Akinobu Mita <akinobu.mita@gmail.com> |
rtc: add support for EPSON TOYOCOM RTC-7301SF/DG This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
e8aa7dcb |
|
12-Jul-2016 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: isl12057: remove driver The Intersil isl12057 is now supported by the ds1307 driver. Acked-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
d00a18a4 |
|
08-Jul-2016 |
Chen-Yu Tsai <wens@csie.org> |
rtc: ac100: Add RTC driver for X-Powers AC100 X-Powers AC100 is a codec / RTC combo chip. This driver supports the RTC sub-device. The RTC block also has clock outputs and non-volatile storage. Non-volatile storage wthin the RTC hardware is not supported. Clock output support is added in the next patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
d6faca40 |
|
01-Jun-2016 |
Arnd Bergmann <arnd@arndb.de> |
rtc: move mc146818 helper functions out-of-line The mc146818_get_time/mc146818_set_time functions are rather large inline functions in a global header file and are used in several drivers and in x86 specific code. Here we move them into a separate .c file that is compiled whenever any of the users require it. This also lets us remove the linux/acpi.h header inclusion from mc146818rtc.h, which in turn avoids some warnings about duplicate definition of the TRUE/FALSE macros. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
06776c89 |
|
01-Jun-2016 |
Venkat Prashanth B U <venkat.prashanth2498@gmail.com> |
rtc: add support for Maxim max6916 Add support for Maxim max6916 RTC. Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
080481f5 |
|
06-Mar-2016 |
Akinobu Mita <akinobu.mita@gmail.com> |
rtc: merge ds3232 and ds3234 According to "Feature Comparison of the DS323x Real-Time Clocks" (http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and DS3234 are very similar. This merges rtc-ds3232 and rtc-ds3234 with using regmap. This change also enables to support alarm for ds3234. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
51aa905c |
|
25-Feb-2016 |
Joshua Henderson <joshua.henderson@microchip.com> |
rtc: pic32: Add PIC32 real time clock driver This driver adds support for the PIC32 real time clock and calendar peripheral: - reading and setting time - alarms provided by dedicated IRQ Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
125e550f |
|
02-Feb-2016 |
Oleksij Rempel <linux@rempel-privat.de> |
rtc: add Alphascale asm9260 driver Add support for RTC controller found on Alphascale asm9260 SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
68298c2d |
|
04-Jan-2016 |
Steffen Trumtrar <s.trumtrar@pengutronix.de> |
rtc: add driver for RX6110SA real time clock The RX6110 comes in two different variants: SPI and I2C. This driver only supports the SPI variant. If the need ever arises to also support the I2C variant, this driver could easily be refactored to support both cases. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
cd0e7c1e |
|
26-Jan-2016 |
Javier Martinez Canillas <javier@osg.samsung.com> |
rtc: Remove Maxim 77802 driver The max77686 RTC driver now supports the max77802 RTC as well so there's no need to have a separate driver anymore. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
ed13d89b |
|
03-Dec-2015 |
Akshay Bhat <akshay.bhat@timesys.com> |
rtc: Add Epson RX8010SJ RTC driver This driver supports the following functions: - reading and setting time - alarms when connected to an IRQ - reading and clearing the voltage low flags Datasheet: http://www.epsondevice.com/docs/qd/en/DownloadServlet?id=ID000956 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
1e3929ef |
|
02-Nov-2015 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: Add a driver for Micro Crystal RV8803 This driver supports the following functions: - reading and settings time - alarms when connected to an IRQ - reading and clearing the voltage low flags - nvram Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
11143c19 |
|
19-Aug-2015 |
Suneel Garapati <suneel.garapati@xilinx.com> |
rtc: add xilinx zynqmp rtc driver Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC platform. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
c28b42e3 |
|
11-Jul-2015 |
Joachim Eastwood <manabian@gmail.com> |
rtc: add rtc-lpc24xx driver Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices. The RTC provides calendar and clock functionality together with alarm interrupt support. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
98ab2c93 |
|
09-May-2015 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: whitespace fixes Some entries in the Kconfig are improperly indented with spaces instead of tabs. Also fix whitespaces in Makefile. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
35cd49c1 |
|
09-May-2015 |
Alexandre Belloni <alexandre.belloni@bootlin.com> |
rtc: Properly sort Makefile Properly sort the Makefile by filename Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
98a9bb5b |
|
20-May-2015 |
Hans Ulli Kroll <ulli.kroll@googlemail.com> |
rtc: driver for Cortina Gemini Driver for the on chip RTC found on Cortina's SoC Gemini. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> [alexandre.belloni@free-electrons.com: use devm_request_irq() and remove useless goto] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
fc297911 |
|
06-May-2015 |
Tianping Fang <tianping.fang@mediatek.com> |
rtc: mediatek: Add MT6397 RTC driver Add Mediatek MT6397 RTC driver Signed-off-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
#
4d61ff6b |
|
05-May-2015 |
Philippe De Muyter <phdm@macqel.be> |
rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC chips. It supports in particular, the supersets AB0805 and AB1805. It allows reading and writing the time, and enables the supercapacitor/ battery charger. [arnd@arndb.de: abx805 depends on i2c] [alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b5b2bdfc |
|
09-Apr-2015 |
Lee Jones <lee.jones@linaro.org> |
rtc: st: Add new driver for ST's LPC RTC ST's Low Power Controller (LPC) controls two devices; watchdog and RTC. Only one of the devices can be used at any one time. This is enforced by the correlating MFD driver. This portion of the driver-set controls the Real Time Clock. Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
#
ba172208 |
|
16-Apr-2015 |
Baruch Siach <baruch@tkos.co.il> |
rtc: driver for Conexant Digicolor CX92755 on-chip RTC Add driver for the RTC hardware block on the Conexant CX92755 SoC, from the Digicolor series of SoCs. Tested on the Equinox evaluation board for the CX92755 chip. [akpm@linux-foundation.org: build command arrays at compile-time] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
aaaf5fbf |
|
16-Feb-2015 |
Joshua Kinard <kumba@gentoo.org> |
rtc: add driver for DS1685 family of real time clocks This adds a driver for the Dallas/Maxim DS1685-family of RTC chips. It supports the DS1685/DS1687, DS1688/DS1691, DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and DS17885/DS17887 RTC chips. These chips are commonly found in SGI O2 and SGI Octane systems. It was originally derived from a driver patch submitted by Matthias Fuchs many years ago for use in EPPC-405-UC modules, which also used these RTCs. In addition to the time-keeping functions, this RTC also handles the shutdown mechanism of the O2 and Octane and acts as a partial NVRAM for the boot PROMS in these systems. Verified on both an SGI O2 and an SGI Octane. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a3a42806 |
|
13-Feb-2015 |
Gregory CLEMENT <gregory.clement@bootlin.com> |
drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs The new mvebu SoCs come with a new RTC driver. This patch adds the support for this new IP which is currently found in the Armada 38x SoCs. This RTC provides two alarms, but only the first one is used in the driver. The RTC also allows using periodic interrupts. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Arnaud Ebalard <arno@natisbad.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0b2f6228 |
|
13-Feb-2015 |
Arnaud Ebalard <arno@natisbad.org> |
rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Calendar module w/ I2C interface. This support includes RTC time reading and setting, Alarm (1 minute accuracy) reading and setting, and battery low detection. The device also supports frequency adjustment and two timers but those features are currently not implemented in this driver. Due to alarm accuracy limitation (and current lack of timer support in the driver), UIE mode is not supported. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
16b1d26e |
|
14-Oct-2014 |
Neelesh Gupta <neelegup@linux.vnet.ibm.com> |
rtc/tpo: Driver to support rtc and wakeup on PowerNV platform The patch implements the OPAL rtc driver that binds with the rtc driver subsystem. The driver uses the platform device infrastructure to probe the rtc device and register it to rtc class framework. The 'wakeup' is supported depending upon the property 'has-tpo' present in the OF node. It provides a way to load the generic rtc driver in in the absence of an OPAL driver. The patch also moves the existing OPAL rtc get/set time interfaces to the new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL. Test results: ------------- Host: [root@tul169p1 ~]# ls -l /sys/class/rtc/ total 0 lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0 [root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time 08:10:07 [root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm [root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm 1413274345 [root@tul169p1 ~]# FSP: $ smgr mfgState standby $ rtim timeofday System time is valid: 2014/10/14 08:12:04.225115 $ smgr mfgState ipling $ CC: devicetree@vger.kernel.org CC: tglx@linutronix.de CC: rtc-linux@googlegroups.com CC: a.zummo@towertech.it Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
a4d4121b |
|
13-Oct-2014 |
Javier Martinez Canillas <javier@osg.samsung.com> |
rtc: add driver for Maxim 77802 PMIC Real-Time-Clock The MAX7802 PMIC has a Real-Time-Clock (RTC) with two alarms. This patch adds support for the RTC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. [akpm@linux-foundation.org: add comment clarifying ffs() use] Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
3ca1e326 |
|
13-Oct-2014 |
Chris Zhong <zyw@rock-chips.com> |
RTC: RK808: add RTC driver for RK808 This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout. Add RTC driver for supporting RTC device present inside RK808 PMIC. [akpm@linux-foundation.org: make tm_def static] Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> says: Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9765d2d9 |
|
25-Aug-2014 |
Chen-Yu Tsai <wens@csie.org> |
rtc: sun6i: Add sun6i RTC driver This patch introduces the driver for the RTC in the Allwinner A31 and A23 SoCs. Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the RTC in A31/A23 are a separate hardware block, which also contain a few controls for the RTC block hardware (a regulator and RTC block GPIO pin latches), while also having separate interrupts for the alarms. The hardware is different enough to make a different driver for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
#
796b7abb |
|
08-Aug-2014 |
Søren Andersen <san@rosetechnology.dk> |
rtc: add pcf85063 support Add support for the pcf85063 rtc chip. [akpm@linux-foundation.org: fix comment typo, tweak conding style] Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
da167ad7 |
|
08-Aug-2014 |
Mark Salter <msalter@redhat.com> |
rtc: ia64: allow other architectures to use EFI RTC Currently, the rtc-efi driver is restricted to ia64 only. Newer architectures with EFI support may want to also use that driver. This patch moves the platform device setup from ia64 into drivers/rtc and allow any architecture with CONFIG_EFI=y to use the rtc-efi driver. Signed-off-by: Mark Salter <msalter@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c2a57550 |
|
06-Jun-2014 |
Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> |
rtc: da9063: RTC driver Add the RTC driver for DA9063. [akpm@linux-foundation.org: coding-style tweaks] Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1fcbe42c |
|
06-Jun-2014 |
Josef Gajdusek <atx@atx.name> |
drivers/rtc: add support for Microchip MCP795 Add driver for SPI RTC Microchip MCP795. Only supports saving/loading time from the chip (i. e. no alarms/power events/ID). Signed-off-by: Josef Gajdusek <atx@atx.name> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1d6316f5 |
|
06-Jun-2014 |
Raghavendra Ganiga <ravi23ganiga@gmail.com> |
drivers/rtc: add support for maxim dallas rtc ds1343 and ds1344 Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f12d8695 |
|
06-Jun-2014 |
Loc Ho <lho@apm.com> |
drivers/rtc: add APM X-Gene SoC RTC driver Add support for the APM X-Gene SoC RTC driver. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Cc: Jon Masters <jcm@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
617b26a0 |
|
03-Apr-2014 |
Raghavendra Ganiga <ravi23ganiga@gmail.com> |
rtc: add support for maxim dallas rtc ds1347 Add support for maxim dallas rtc ds1347 Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
dcaf0384 |
|
23-Jan-2014 |
Heiko Stuebner <heiko@sntech.de> |
rtc: add hym8563 rtc-driver The Haoyu Microelectronics HYM8563 provides rtc and alarm functions as well as a clock output of up to 32kHz. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
70e12337 |
|
19-Dec-2013 |
Arnaud Ebalard <arno@natisbad.org> |
rtc: Add support for Intersil ISL12057 I2C RTC chip Intersil ISL12057 is an I2C RTC chip also supporting two alarms. This patch only adds support for basic RTC functionalities (i.e. getting and setting time). Tests have been performed on NETGEAR ReadyNAS 102 w/ startup/shutdown scripts, hwclock, ntpdate and openntpd. Reviewed-by: Mark Brown <broonie@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
#
594c6fb9 |
|
16-Nov-2013 |
Carlo Caione <carlo.caione@gmail.com> |
ARM: sun4i/sun7i: RTC driver This patch introduces the driver for the RTC in the Allwinner A10 and A20 SoCs. Signed-off-by: Carlo Caione <carlo.caione@gmail.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
#
b4506261 |
|
12-Nov-2013 |
Laxman Dewangan <ldewangan@nvidia.com> |
drivers/rtc/rtc-as3722: add RTC driver The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. Add a driver to support accessing the RTC found on the ams AS3722 PMIC using RTC framework. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com> Cc: Mark Brown <broonie@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
5bccae6e |
|
12-Nov-2013 |
Sangbeom Kim <sbkim73@samsung.com> |
rtc: s5m-rtc: add real-time clock driver for s5m8767 Add real-time clock driver for s5m8767. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Todd Broch <tbroch@chromium.org> Cc: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> [mfd parts] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
453b4c6d |
|
11-Sep-2013 |
Jonas Jensen <jonas.jensen@gmail.com> |
rtc: add MOXA ART RTC driver Add RTC driver for MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e88b815e |
|
03-Jul-2013 |
Xianglong Du <Xianglong.Du@csr.com> |
drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVI On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
18cb6368 |
|
03-Jul-2013 |
Renaud Cerrato <r.cerrato@til-technologies.fr> |
rtc: add NXP PCF2127 support (i2c) Added support for NXP PCF2127 RTC (i2c). [akpm@linux-foundation.org: fix typo, fix warnings] Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
5e0b2704 |
|
21-Feb-2013 |
Jonghwa Lee <jonghwa3.lee@samsung.com> |
rtc: max8997: add driver for max8997 rtc Add an rtc driver for Maxim 8997 multifunction chip. Max8997 has rtc module in it. and it can be used for timekeeping clock and system alarm. It provide various operational mode those are BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default. Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR (Watchdog Timeout and Software Reset). Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
cce2da9a |
|
21-Feb-2013 |
Torben Hohn <torbenh@linutronix.de> |
rtc: add support for spi rtc rx4581 [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Torben Hohn <torbenh@linutronix.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
36d61824 |
|
21-Feb-2013 |
Laxman Dewangan <ldewangan@nvidia.com> |
rtc: add RTC driver for TPS80031/TPS80032 Add an RTC driver for TPS80031/TPS80032 chips by TI. This driver supports: - Setting and getting time and date. - Setting and reading alarm time. - Alarm and interrupt functionlity. [akpm@linux-foundation.org: remove obsolete __devinit/__devexit] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
38ae176e |
|
21-Feb-2013 |
Kim, Milo <Milo.Kim@ti.com> |
rtc: add new lp8788 rtc driver TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight driver and current sinks. This patch enables LP8788 rtc module. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: "devendra.aaru" <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
fca1dd03 |
|
21-Feb-2013 |
Jonghwa Lee <jonghwa3.lee@samsung.com> |
rtc: max77686: add Maxim 77686 driver Add a driver to support max77686 rtc. MAX77686 rtc support smpl and wtsr mode. It has two alarm register which can be used for alarming to wake system up. This drvier uses regmap to access its register. [akpm@linux-foundation.org: remove inline, __devinit annotations] [jg1.han@samsung.com: fix build warnings] [akpm@linux-foundation.org: simplify code] Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0101e53c |
|
03-Jan-2013 |
Laxman Dewangan <ldewangan@nvidia.com> |
rtc: palmas: Add RTC driver Palmas series PMIC TI Palmas series PMIC support the RTC and alarm functionality. Add RTC driver with alarm support for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
023f333a |
|
17-Dec-2012 |
Jason Gunthorpe <jgg@ziepe.ca> |
NTP: Add a CONFIG_RTC_SYSTOHC configuration The purpose of this option is to allow ARM/etc systems that rely on the class RTC subsystem to have the same kind of automatic NTP based synchronization that we have on PC platforms. Today ARM does not implement update_persistent_clock and makes extensive use of the class RTC system. When enabled CONFIG_RTC_SYSTOHC will provide a generic rtc_update_persistent_clock that stores the current time in the RTC and is intended complement the existing CONFIG_RTC_HCTOSYS option that loads the RTC at boot. Like with RTC_HCTOSYS the platform's update_persistent_clock is used first, if it works. Platforms with mixed class RTC and non-RTC drivers need to return ENODEV when class RTC should be used. Such an update for PPC is included in this patch. Long term, implementations of update_persistent_clock should migrate to proper class RTC drivers and use CONFIG_RTC_SYSTOHC instead. Tested on ARM kirkwood and PPC405 Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
62e00cb9 |
|
14-Dec-2012 |
Alexander Holler <holler@ahsoftware.de> |
rtc: add rtc-driver for HID sensors of type time This driver makes the time from HID sensors (hubs) which are offering such available like any other RTC does. It is necessary that all values like year, month etc, are send as 8bit values (1 byte each) and all of them in 1 report. Also the spec HUTRR39b doesn't define the range of the year field, we tread it as 0 - 99 because that's what most RTCs I know about are offering. Currently the time can only be read. Setting the time must be done through sending a report (or a feature). The spec currently doesn't define how and I'm not sure if I just should define something by myself. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
#
dc59ed38 |
|
04-Jan-2013 |
Laxman Dewangan <ldewangan@nvidia.com> |
rtc: add RTC driver for TPS6586x Add an RTC driver for TPS6586X chips by TI. This driver supports: - Setting and getting time and date. - Setting and reading alarm time. - Alarm and interrupt functionlity. [akpm@linux-foundation.org: remove stray semicolons] [akpm@linux-foundation.org: start epoch in 2009] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
6920d996 |
|
17-Dec-2012 |
Ashish Jangam <ashish.jangam@kpitcummins.com> |
rtc: DA9055 RTC driver A driver for the DA9055 PMIC. This has a dependency upon the DA9055 MFD core. Functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f803f0d0 |
|
17-Dec-2012 |
Thierry Reding <thierry.reding@avionic-design.de> |
rtc: add NXP PCF8523 support Add an RTC driver for PCF8523 chips by NXP Semiconductors. No support is currently provided for the alarm and interrupt functions. Only the time and date functionality is implemented. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
90829c08 |
|
04-Oct-2012 |
Venu Byravarasu <vbyravarasu@nvidia.com> |
rtc: rc5t583: add ricoh rc5t583 RTC driver Add an RTC driver for the RTC device on Ricoh MFD Rc5t583. Ricoh RTC has 3 types of alarms. The current patch adds support for the Y-Alarm of RC5t583 RTC. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
94c01ab6 |
|
04-Oct-2012 |
Stephen Warren <swarren@nvidia.com> |
rtc: add MAX8907 RTC driver The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The driver is based on an original by or fixed by: * Tom Cherry * Prashant Gaikwad * Joseph Yoon During upstreaming, I (swarren): * Converted to regmap. * Fixed handling of RTC_HOUR register containing 12. * Fixed handling of RTC_WEEKDAY register. * General cleanup. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Cherry <tcherry@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Joseph Yoon <tyoon@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0e783980 |
|
04-Oct-2012 |
Venu Byravarasu <vbyravarasu@nvidia.com> |
rtc: tps65910: add RTC driver for TPS65910 PMIC RTC TPS65910 PMIC is a MFD with RTC as one of the device. Adding RTC driver for supporting RTC device present inside TPS65910 PMIC. Only support for RTC alarm is implemented as part of this patch. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
179a502f |
|
04-Oct-2012 |
Shawn Guo <shawn.guo@linaro.org> |
rtc: snvs: add Freescale rtc-snvs driver Add an RTC driver for Freescale Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7418a119 |
|
04-Oct-2012 |
Sven Schnelle <svens@stackframe.org> |
rtc: add Dallas DS2404 driver [akpm@linux-foundation.org: fix warning] Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2985c29c |
|
09-Jul-2012 |
Qiao Zhou <zhouqiao@marvell.com> |
rtc: Add rtc support to 88PM80X PMIC add rtc driver for MARVELL 88PM80X PMIC and enable rtc function. Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
79811595 |
|
29-May-2012 |
Fabio Estevam <festevam@gmail.com> |
rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
fef931ff |
|
23-Mar-2012 |
Ashish Jangam <ashish.jangam@kpitcummins.com> |
rtc: driver for DA9052/53 PMIC v1 RTC Driver for Dialog Semiconductor DA9052/53 PMICs. This patch is functionally tested on Samsung SMDKV6410. [akpm@linux-foundation.org: clean up file header layout, remove unneeded initialisation of local arrays] Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: David Dajun Chen <dchen@diasemi.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b4f0b880 |
|
23-Mar-2012 |
zhao zhang <zhzhl555@gmail.com> |
MIPS: add RTC support for loongson1B Add RTC support(TOY counter0) for loongson1B SOC Signed-off-by: zhao zhang <zhzhl555@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9a9a54ad |
|
25-Jul-2011 |
Anirudh Ghayal <aghayal@codeaurora.org> |
drivers/rtc: add support for Qualcomm PMIC8xxx RTC Add support for PMIC8xxx based RTC. PMIC8xxx is Qualcomm's power management IC that internally houses an RTC module. This driver communicates with the PMIC module over SSBI bus. [akpm@linux-foundation.org: cosmetic tweaks] Acked-by: Wan ZongShun <mcuos.com@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2809e80b |
|
26-May-2011 |
Guan Xuetao <gxt@mprc.pku.edu.cn> |
unicore32: move rtc-puv3.c to drivers/rtc directory The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/ to drivers/rtc/, with renaming it to rtc-puv3.c. Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
#
0942a71e |
|
26-May-2011 |
Rajeev Kumar <rajeev-dlh.kumar@st.com> |
rtc: add support for spear rtc Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
74d34d4b |
|
26-May-2011 |
Voss, Nikolaus <N.Voss@weinmann.de> |
rtc: add basic support for ST M41T93 SPI RTC Add basic support for ST m41t93 SPI RTCs. Tested with factory-new and with "run-in" species with and without backup batteries. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
52365230 |
|
26-May-2011 |
Heiko Schocher <hs@denx.de> |
rtc: add rv3029c2 RTC support Add support for the Micro Crystal RV3029-C2 RTC chips. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
ae3551f9 |
|
26-May-2011 |
Mike Rapoport <rppt@kernel.org> |
rtc: add EM3027 rtc driver Add support for EM Microelectronic EM3027 RTC chip. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f77fbdf9 |
|
26-May-2011 |
Alexey Charkov <alchark@gmail.com> |
rtc: add support for the RTC in VIA VT8500 and compatibles This adds a driver for the RTC devices in VIA and WonderMedia Systems-on-Chip. Alarm, 1Hz interrupts, reading and setting time are supported. Signed-off-by: Alexey Charkov <alchark@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Alexey Charkov <alchark@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
008b3040 |
|
06-May-2011 |
Haojian Zhuang <haojian.zhuang@marvell.com> |
mfd: Add rtc support to 88pm860x Enable rtc function in 88pm860x PMIC. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
dd196a2b |
|
09-May-2011 |
Chris Metcalf <cmetcalf@tilera.com> |
tile: add an RTC driver for the Tilera hypervisor This is a simple RTC driver that lets Tilera hardware boot up and set the clock correctly. Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
|
#
ff859ba6 |
|
22-Mar-2011 |
Andrew Chew <achew@nvidia.com> |
rtc: add real-time clock driver for NVIDIA Tegra This is a platform driver that supports the built-in real-time clock on Tegra SOCs. Signed-off-by: Andrew Chew <achew@nvidia.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Jon Mayo <jmayo@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
76aea3e9 |
|
14-Jan-2011 |
matt mooney <mfm@muteddisk.com> |
rtc: change to new flag variable Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
|
#
0146f261 |
|
10-Nov-2010 |
Feng Tang <feng.tang@intel.com> |
rtc: Add drivers/rtc/rtc-mrst.c Provide the standard kernel rtc driver interface on top of the vrtc layer added in the previous patch. Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain> [Fixed swapped arguments on IPC] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> [Cleaned up and the device creation moved to arch/x86/platform] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
1c97872b |
|
27-Oct-2010 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
rtc: Add support for the rtc found in the MC13892 PMIC The mfd driver for MC13783 recently got support for MC13892 and was renamed accordingly from mc13783-core to mc13xxx-core. Do the same for rtc-mc13783. The only relevant change is to use platform id's to tell the platform bus that this driver is responsible for mc13892-rtc devices, too. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
9b16c0a4 |
|
05-Aug-2010 |
Joonyoung Shim <jy0922.shim@samsung.com> |
rtc: Add MAX8998 rtc driver This adds support for the RTC provided by the Maxim 8998 chip. This driver was tested on a GONI board by using the rtc-test application from the Documentation/rtc.txt. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
9aa449be |
|
27-Oct-2010 |
Kevin Wells <wellsk40@gmail.com> |
rtc: rtc-lpc32xx: introduce RTC driver for the LPC32XX SoC Add an RTC driver for the built-in RTC in the LPC32XX SoC. This patch includes updates from the initial review comments and updates from the v3 review. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Durgesh Pattamatta <durgesh.pattamatta@nxp.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c03675f0 |
|
10-Aug-2010 |
Roy Zang <tie-fei.zang@freescale.com> |
rtc: add support for DS3232 RTC Add a driver for the DS3232 RTC chip via the I2C bus. Alarms are not supported in this version of the driver. [akpm@linux-foundation.org: fix Kconfig help text] Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Jingchang Lu <b22599@freescale.com> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d6c7428f |
|
10-Aug-2010 |
Roman Fietze <roman.fietze@telemotive.de> |
rtc: add Intersil ISL12022 RTC driver - derived from rtc-pcf8563 - no SRAM driver Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
eba54546 |
|
10-Aug-2010 |
Baruch Siach <baruch@tkos.co.il> |
rtc: driver for the DryIce block found in i.MX25 chips This driver is based on code from Freescale which accompanies their i.MX25 PDK board, with some cleanup. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
3bf0eea8 |
|
19-Jun-2010 |
Lars-Peter Clausen <lars@metafoo.de> |
RTC: Add JZ4740 RTC driver Add support for the RTC unit on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: rtc-linux@googlegroups.com Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Alessandro Zummo <a.zummo@towertech.it>, Patchwork: https://patchwork.linux-mips.org/patch/1424/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
#
0af62f4d |
|
26-May-2010 |
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> |
rtc: AB8500 RTC driver Add a driver for the RTC on the AB8500 power management chip. This is a client of the AB8500 MFD driver. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8ecf6c54 |
|
05-Nov-2009 |
Miguel Aguilar <miguel.aguilar@ridgerun.com> |
RTC: DaVinci RTC driver This driver features: * Alarm support. * Periodic interrupt by using a timer include into the RTC module. * The update interrupt is not supported by this RTC module. This driver was tested on a DM365 EVM by using the rtc-test application from the Documentation/rtc.txt. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it>
|
#
a39069f6 |
|
25-Jan-2010 |
Haojian Zhuang <haojian.zhuang@marvell.com> |
rtc: Enable rtc in max8925 MAX8925 is a PMIC that contains RTC component. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
50aae724 |
|
16-Feb-2010 |
Anatolij Gustschin <agust@denx.de> |
rtc: Add MPC5121 Real time clock driver Add support for MPC5121 real time clock module. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
afd49a7e |
|
15-Dec-2009 |
Wan ZongShun <mcuos.com@gmail.com> |
ARM: NUC900: add RTC driver support for nuc910 and nuc920 Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Hu Ruihuan <specter118@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "jack wang" <jack_wang@usish.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1ce7c83f |
|
15-Dec-2009 |
Piotr Ziecik <kosmo@semihalf.com> |
rtc: add driver for BQ32000 I2C RTC This patch adds basic support for Texas Instruments BQ32000 I2C RTC. Only time reading/writing is implemented. Advanced features, such as trickle charger and crystal calibration are not supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
43299f285 |
|
15-Dec-2009 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
rtc: add Freescale MC13783 RTC driver This driver provides support for the RTC part integrated into the Freescale MC13783 PMIC and bases on patch created earlier by Sascha Hauer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b07682b6 |
|
13-Dec-2009 |
Santosh Shilimkar <santosh.shilimkar@ti.com> |
mfd: Rename twl4030* driver files to enable re-use The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
4f672ce2 |
|
18-Mar-2009 |
Geert Uytterhoeven <geert@linux-m68k.org> |
rtc: Add an RTC driver for the Ricoh RP5C01 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
|
#
4f9b9bba |
|
18-Mar-2009 |
Geert Uytterhoeven <geert@linux-m68k.org> |
rtc: Add an RTC driver for the Oki MSM6242 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
|
#
d3c7a3f7 |
|
22-Sep-2009 |
Daniel Ribeiro <drwyrm@gmail.com> |
rtc: driver for PCAP2 PMIC [ospite@studenti.unina.it: get pcap data from the parent device] Signed-off-by: guiming zhuo <gmzhuo@gmail.com> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
88413e1e |
|
22-Sep-2009 |
Alessandro Zummo <a.zummo@towertech.it> |
rtc: reorder Makefile Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
df17f631 |
|
22-Sep-2009 |
dmitry pervushin <dpervushin@embeddedalley.com> |
rtc: add Freescale stmp37xx/378x driver Add support for RTC on the Freescale STMP37xx/378x platform. Signed-off-by: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
aa958f57 |
|
22-Sep-2009 |
Linus Walleij <linus.ml.walleij@gmail.com> |
rtc: U300 COH 901 331 RTC driver v3 This adds a driver for the RTC COH 901 331 found in the ST-Ericsson U300 series mobile platforms to the RTC subsystem. It integrates to the ARM kernel support recently added to RMKs ARM tree and will be enabled in the U300 defconfig in due time. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d00ed3cf |
|
22-Sep-2009 |
Daniel Mack <daniel@caiaq.de> |
rtc: add driver for MXC's internal RTC module This adds a driver for Freescale's MXC internal real time clock modules. The code is taken from Freescale's BSPs, but modified to fit the current kernel coding mechanisms. Also, the PMIC external clock function was removed for now to not add dead bits and keep the code as simple as possible. [akpm@linux-foundation.org: make PIE_BIT_DEF[] static] Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7f3923a1 |
|
22-Sep-2009 |
Chris Verges <chrisv@cyberswitching.com> |
rtc: Philips PCF2123 RTC SPI driver Add support for the Philips/NXP PCF2123 RTC. Signed-off: Chris Verges <chrisv@cyberswitching.com> Tested-by: Chris Verges <chrisv@cyberswitching.com> Signed-off: Christian Pellegrin <chripell@fsfe.org> Tested-by: Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
bd207cfb |
|
30-Aug-2009 |
Linus Walleij <linus.walleij@stericsson.com> |
rtc: AB3100 RTC support This adds support for the RTC found inside the AB3100 Mixed Signal chip. The symbols used for communicating with the chip is found in the mfd/ab3100-core.c driver that also provides the platform device. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
35c86bf6 |
|
27-Aug-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
rtc: Add support for RTCs on Wolfson WM831x devices The WM831x series of PMICs contain RTC functionality. The hardware provides a 32 bit counter incrementing at 1Hz together with a per tick interrupt and an alarm value. For simplicity the driver chooses to define the epoch for the counter as the Unix epoch - if required platform data can be used in future to customise this. When powered on from a completely cold state the RTC reports that it has not been configured - when this happens an error is returned when attempting to read the RTC in order to avoid use of values we know to be invalid. The hardware also provides security features which mean that it can ignore attempts to set the RTC time in certain circumstances, most notably if the RTC is written to too often. These errors are detected by verifying the written RTC value. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
3c2b9075 |
|
17-Jun-2009 |
Wolfgang Grandegger <wg@grandegger.com> |
rtc: add stand-alone driver for RX8025 chip Add support for the Epson RX-8025SA/NB RTC chips. It includes support for alarms, periodic interrupts (1 Hz) and clock precision adjustment. For clock precision adjustment, the SYSFS file "clock_adjust_ppb" gets created in "/sys/class/rtc/rtcX/device". It permits to set and get the clock adjustment in ppb (parts per billion), e.g.: # echo -183000 > /sys/class/rtc/rtc0/device/clock_adjust_ppb # cat /sys/class/rtc/rtc0/device/clock_adjust_ppb -183000 This allows to compensate temperature dependent clock drifts. According to the RX8025 SA/NB application manual the frequency and temperature characteristics can be approximated using the following equation: df = a * (ut - t)**2 df: Frequency deviation in any temperature a : Coefficient = (-35 +-5) * 10**-9 ut: Ultimate temperature in degree = +25 +-5 degree t : Any temperature in degree Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0b5f037a |
|
24-Feb-2009 |
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> |
powerpc/ps3: Add rtc-ps3 Create a real RTC driver for PS3, and unhook the deprecated ppc_md.[gs]et_rtc_time. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
#
bcd68a70 |
|
19-Feb-2009 |
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> |
powerpc: Hook up rtc-generic, and kill rtc-ppc PowerPC has been a long time user of the generic RTC abstraction, so hook up rtc-generic: - Create the "rtc-generic" platform device if ppc_md.get_rtc_time is set, - Kill rtc-ppc, as rtc-generic offers the same functionality in a more generic way, and supports autoloading through udev. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
#
3afe6d04 |
|
19-Feb-2009 |
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> |
parisc: rtc: Rename rtc-parisc to rtc-generic The rtc-parisc driver is not PA-RISC specific at all, as it uses the existing (but deprecated) generic RTC infrastructure ([gs]et_rtc_time()). Rename the driver from rtc-parisc to rtc-generic. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
#
5e3fd9e5 |
|
31-Mar-2009 |
dann frazier <dannf@dannf.org> |
rtc: add platform driver for EFI Munge Stephane Eranian's efirtc.c code into an rtc platform driver [akpm@linux-foundation.org: use is_leap_year()] Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
afd8d0f9 |
|
04-Feb-2009 |
David Brownell <dbrownell@users.sourceforge.net> |
rtc: rtc-dm355evm driver Simple RTC driver for the MSP430 firmware on the DM355 EVM board. Other than not supporting atomic reads/writes of all four bytes, this is reasonable as a basic no-alarm RTC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
eae854b2 |
|
08-Jan-2009 |
Balaji Rao <balajirrao@openmoko.org> |
rtc: PCF50633 rtc driver Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
|
#
defb4514 |
|
06-Jan-2009 |
Saeed Bishara <saeed@marvell.com> |
rtc: driver for Marvell's SoCs 88F6281 and 88F6192 Driver for the on-chip RTC found in some of Marvell's SoCs such as the Kirkwood 88F6281 and 88F6192 devices. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0e149233 |
|
06-Jan-2009 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
rtc: add rtc-tx4939 driver Add support for RTC in TX4939 SoC. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
45fd8a0c |
|
06-Jan-2009 |
Manuel Lauss <mano@roarinelk.homelinux.net> |
rtc: Au1000 On-Chip Counter0-as-RTC driver. Simple driver which uses the Au1xxx Time-Of-Year counter (counter0) as a 1Hz RTC. [akpm@linux-foundation.org: repair Kconfig] Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
dc944368 |
|
06-Jan-2009 |
Robert Jarzmik <robert.jarzmik@free.fr> |
rtc: driver for pxa27x and pxa3xx SoC With PXA27x and above, a new RTC hardware block was added in addition to the legacy one which is also found on the SA1100 SOC family. This second RTC block is called "wristwatch" and "periodic interrupt" and works independently from the other RTC block. The driver offers provides : - a 1Hz ticking clock - a periodic alarm, in the 1Hz to 1000Hz range - a one shot alarm Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
06de1808 |
|
12-Nov-2008 |
Mark Jackson <mpfj@mimc.co.uk> |
rtc: add Dallas DS1390/93/94 RTC chips Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a7fa9851 |
|
12-Nov-2008 |
Martyn Welch <martyn.welch@gefanuc.com> |
rtc: basic implementation of Epson RX-8581 I2C Real Time Clock Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
077eaf5b |
|
12-Nov-2008 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
rtc: rtc-wm8350: add support for WM8350 RTC This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Liam Girdwood <linux@wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f96411ab |
|
20-Oct-2008 |
David Brownell <dbrownell@users.sourceforge.net> |
mfd: rtc-twl4030 driver This adds a driver for the RTC inside the TWL4030 multi-function device. It's a fairly basic RTC, with a wake-capable alarm. Note that many of the pre-release Overo boards now in circulation can't effectively use this RTC, because of a wiring error that puts its TWL chip into "secure" mode. (As in "secure yourself against tampering".) This isn't an issue on other OMAP3 boards now supported in mainline, such as Beagle and Labrador. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
|
#
2f9b75e0 |
|
15-Oct-2008 |
Dennis Aberilla <denzzzhome@yahoo.com> |
rtc: add device driver for Dallas DS3234 SPI RTC chip Add support for the Dallas DS3234 chip - extremely accurate SPI bus RTC with integrated crystal and SRAM. [akpm@linux-foundation.org: don't use BIN2BCD/BCD2BIN] Signed-off-by: Dennis Aberilla <denzzzhome@yahoo.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d1dbd82e |
|
14-Oct-2008 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
RTC: M48T35: new RTC driver This driver replaces the broken ip27-rtc driver in drivers/char and gives back RTC support for SGI IP27 machines. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
#
5f119f29 |
|
14-Oct-2008 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
MIPS: DS1286: New RTC driver This driver replaces the broken DS1286 driver in drivers/char and gives back RTC support for SGI IP22 and IP28 machines. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
#
9eb16864 |
|
10-Sep-2008 |
Kyle McMartin <kyle@mcmartin.ca> |
parisc: add rtc platform driver Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
#
de2cf332 |
|
29-Aug-2008 |
David S. Miller <davem@davemloft.net> |
rtc: Add Starfire platform RTC driver. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7a138ede |
|
29-Aug-2008 |
David S. Miller <davem@davemloft.net> |
rtc: Add Sun4V hypervisor RTC driver. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cca4c231 |
|
29-Aug-2008 |
David S. Miller <davem@davemloft.net> |
rtc: Add TI BQ4802 RTC driver. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
53e84b67 |
|
23-Jul-2008 |
David Brownell <david-b@pacbell.net> |
rtc: ds1305/ds1306 driver Support the Dallas/Maxim DS1305 and DS1306 RTC chips. These use SPI, and support alarms, NVRAM, and a trickle charger for use when their backup power supply is a supercap or rechargeable cell. This basic driver doesn't yet support suspend/resume or wakealarms. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8fc2c767 |
|
23-Jul-2008 |
Kim B. Heino <Kim.Heino@bluegiga.com> |
rtc: add support for ST M41T94 SPI RTC This patch adds kernel driver for M41T94 RTC chip connected via SPI. I've tested it on two different AT91-based hardwares. This is third revision of the patch: some comments made by Alessandro Zummo fixed. Revision two added support for century bit and fixes. Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c6d8f400 |
|
12-Jun-2008 |
Sergey Lapin <slapin@ossfans.org> |
rtc: Ramtron FM3130 RTC support Ramtron FM3130 is a chip with two separate devices inside, RTC clock and FRAM. This driver provides only RTC functionality. This chip is met in lots of custom boards with AT91SAMXXXX CPU I work with, is cheap and in no way better or worse than any other RTC on market. While it is mostly met on much smaller devices, I think it is great to have it supported in Linux. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
aabe1885 |
|
05-Jun-2008 |
David Woodhouse <dwmw2@infradead.org> |
rtc: class driver for ppc_md RTC functions This hooks up the platform-specific [gs]et_rtc_time functions so that kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms. A new driver, and one which we've been shipping in Fedora for a while already, since otherwise RTC support breaks. [akpm@linux-foundation.org: fix Kconfig indenting] Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a190901c |
|
19-Apr-2008 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[RTC] rtc-pl030: add driver, remove old non-rtc lib driver Convert Integrator PL030 RTC driver to use the RTC class interfaces. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
c46288b0 |
|
04-Mar-2008 |
Byron Bradley <byron.bbradley@gmail.com> |
rtc: add support for the S-35390A RTC chip This adds basic get/set time support for the Seiko Instruments S-35390A. This chip communicates using I2C and is used on the QNAP TS-109/TS-209 NAS devices. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Byron Bradley <byron.bbradley@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: David Brownell <david-b@pacbell.net> Tested-by: Tim Ellis <tim@ngndg.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
4cdf854f |
|
06-Feb-2008 |
David Brownell <david-b@pacbell.net> |
rtc: at91sam9 RTC support (RTT and/or RTC) AT91sam9 RTC support, primarily in the form of an RTT-as-RTC driver that was extracted from 2.6.23-at91 patch and updated: - Relies on now-merged platform updates, which associate the RTT hardware address with each RTT and use the "at91_rtt" name. - RTC framework related fixes and cleanups, notably: * removed now-needless suspend/resume clock offset logic * alarm read/write now respects the "enabled" flag * suspend always disables update irqs * shutdown (and startup) disables all irqs - Misc cleanup: * use dev_*() messaging * add comments * remove globals, * ... etc - Don't force use of RTT0 and GPBR0. Either resource may need to be used for other purposes (like NO_HZ support). - Update "AT91RM9200 RTC" Kconfig to allow it on SAM9RL chips (it has both RTT and RTC). Driver binding uses bus_find_device() to avoid needing any kind of "timer library" code when there's more than one RTT module. (This timer can be used as an RTC, to support NO_HZ operation, or potentially for other stuff. The choice is a per-system policy.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Michel Benoit <murpme@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2805b969 |
|
06-Feb-2008 |
Magnus Damm <magnus.damm@gmail.com> |
rtc: add support for Epson RTC-9701JE V2 Add support for the Epson RTC-9701JE SPI RTC device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8f26795a |
|
06-Feb-2008 |
Andrew Sharp <andy.sharp@onstor.com> |
Platform real time clock driver for Dallas 1511 chip Add RTC support for DS1511 RTC/WDT chip. Signed-off-by: Andy Sharp <andy.sharp@onstor.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
739d340d |
|
06-Feb-2008 |
Paul Mundt <lethal@linux-sh.org> |
rtc: ds1302 rtc support This adds a basic ds1302 RTC driver, which is basically a cleanup and move of the in-tree SH SecureEdge5410 code (which is currently located in arch/sh/board/snapgear/rtc.c) to drivers/rtc. This aims to be a building block that the M32R and CRIS code can be worked on top of, so we can get rid of drivers/char/ds1302.c and arch/cris/arch-v10/drivers/ds1302.c respectively, though more work is needed for this. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
bf4994d7 |
|
16-Oct-2007 |
Scott Wood <scottwood@freescale.com> |
rtc: RTC class driver for the ds1374 This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip, based on drivers/i2c/chips/ds1374.c. It supports alarm functionality. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0ca56b4b |
|
26-Jul-2007 |
Alessandro Zummo <alessandro.zummo@towertech.it> |
Reorder RTC Makefile Alphabetic reordering of the drivers in the rtc subsys makefile. (akpm: merge this asap! Makefiles are the source of many patch conflicts..) Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
02964115 |
|
21-Jul-2007 |
Thomas Hommel <thomas.hommel@gefanuc.com> |
rtc: add support for STK17TA8 chip This patch adds support for the Simtek STK17TA8 timekeeping chip. The STK17TA8 is quite similar to the DS1553, but differs in register layout and in various control bits in the registers. I chose to make this a new driver to avoid confusion in the code and to not get lost in #ifdefs. Signed-off-by: Thomas Hommel <thomas.hommel@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
537739de |
|
17-Jul-2007 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
RTC driver for DS1216 chips RTC driver for Dallas/Maxim DS126 chips used in SNI RM200/RM400 [akpm@linux-foundation.org: cleanups] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
2e774c7c |
|
17-Jul-2007 |
Mark Zhan <rongkai.zhan@windriver.com> |
rtc: add support for the ST M48T59 RTC [akpm@linux-foundation.org: x86_64 build fix] [akpm@linux-foundation.org: The acpi guys changed the bin_attribute code] Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
caaff562 |
|
17-Jul-2007 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
rtc: add rtc-m41t80 driver This is a new-style i2c driver for ST M41T80 series RTC chip, derived from works by Alexander Bigga <ab@mycable.de> who wrote the original rtc-m41txx.c based on drivers/i2c/chips/m41t00.c driver. This driver supports M41T8[0-4] and M41ST8[457]. The old m41t00 driver supports M41T00, M41T81 and M41T85(M41ST85). While the M41T00 chip is now supported by rtc-ds1307 driver, this driver does not include support for the chip. [akpm@linux-foundation.org: remove bogus `static'] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Alexander Bigga <ab@mycable.de> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
fa04e78b |
|
17-Jul-2007 |
Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
Driver for the Atmel on-chip RTC on AT32AP700x devices Tested on the AT32AP7000/ATSTK1000. Driver does only suport time, wake up and a very simple alarm, because of hardware limitations. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 From: David Brownell <david-b@pacbell.net> - Strike some alarm setup code that's no longer needed. (This patch seems to have gotten lost somewhere...) - Make the driver name (and its module alias) match what the platform setup code uses, so the driver can bind and hotplug. [akpm@linux-foundation.org: fix several checkpatch.pl warnings] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7d9f99ec |
|
08-May-2007 |
David Brownell <david-b@pacbell.net> |
rtc: simplified /proc/driver/rtc handling This simplifies the RTC procfs support by removing the class_interface that hooks it into the rtc core. If it's configured, then sysfs support is now part of the RTC core, and is never a separate module. It also removes the class_interface hook, now that its last remaining user is gone. (That API is usable only with a "struct class_device".) It's another step towards being able to remove "struct class_device". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
446ecbd9 |
|
08-May-2007 |
David Brownell <david-b@pacbell.net> |
rtc: simplified rtc sysfs attribute handling This simplifies the RTC sysfs support by removing the class_interface that hooks it into the rtc core. If it's configured, then sysfs support is now part of the RTC core, and is never a separate module. It's another step towards being able to remove "struct class_device". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
5726fb20 |
|
08-May-2007 |
David Brownell <david-b@pacbell.net> |
rtc: remove /sys/class/rtc-dev/* This simplifies the /dev support by removing a superfluous class_device (the /sys/class/rtc-dev stuff) and the class_interface that hooks it into the rtc core. Accordingly, if it's configured then /dev support is now part of the RTC core, and is never a separate module. It's another step towards being able to remove "struct class_device". [bunk@stusta.de: drivers/rtc/rtc-dev.c should #include "rtc-core.h"] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
aa5bd7e9 |
|
08-May-2007 |
Dale Farnsworth <dale@farnsworth.org> |
rtc: add RTC class driver for the Maxim MAX6900 Signed-off-by: Dale Farnsworth.org <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e9f2bd81 |
|
08-May-2007 |
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
RTC: add rtc-rs5c313 driver Add an RTC driver for Ricoh RS5C313 RTC chip. [akpm@linux-foundation.org: Zillions of coding-style fixes] [akpm@linux-foundation.org: build fixes] Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8cc75c9a |
|
06-May-2007 |
Wu, Bryan <bryan.wu@analog.com> |
Blackfin: on-chip RTC controller driver This patch implements the driver necessary use the Analog Devices Blackfin processor's on-chip RTC controller. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7be2c7c9 |
|
10-Feb-2007 |
David Brownell <david-b@pacbell.net> |
[PATCH] RTC framework driver for CMOS RTCs This is an "RTC framework" driver for the "CMOS" RTCs which are standard on PCs and some other platforms. That's MC146818 compatible silicon. Advantages of this vs. drivers/char/rtc.c (use one _or_ the other, only one will be able to claim the RTC irq) include: - This leverages both the new RTC framework and the driver model; both PNPACPI and platform device modes are supported. (A separate patch creates a platform device on PCs where PNPACPI isn't configured.) - It supports common extensions like longer alarms. (A separate patch exports that information from ACPI through platform_data.) - Likewise, system wakeup events use "real driver model support", with policy control via sysfs "wakeup" attributes and and using normal rtc ioctls to manage wakeup. (Patch in the works. The ACPI hooks are known; /proc/acpi/alarm can vanish. Making it work with EFI will be a minor challenge to someone with e.g. a MiniMac.) It's not yet been tested on non-x86 systems, without ACPI, or with HPET. And the RTC framework will surely have teething pains on "mainstream" PC-based systems (though must embedded Linux systems use it heavily), not limited to sorting out the "/dev/rtc0" issue (udev easily tweaked). Also, the ALSA rtctimer code doesn't use the new RTC API. Otherwise, this should be a no-known-regressions replacement for the old drivers/char/rtc.c driver, and should help the non-embedded distros (and the new timekeeping code) start to switch to the framework. Note also that any systems using "rtc-m48t86" are candidates to switch over to this more functional driver; the platform data is different, and the way bytes are read is different, but otherwise those chips should be compatible. [akpm@osdl.org: sparc32 fix] [akpm@osdl.org: sparc64 fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Woody Suwalski <woodys@xandros.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7fc39f6d |
|
10-Dec-2006 |
Andrew Victor <andrew@sanpeople.com> |
[PATCH] AT91RM9200 RTC The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the internal RTC peripheral. This RTC driver is therefore AT91RM9200-specific. This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name of the configuration option. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
db68b189 |
|
06-Dec-2006 |
David Brownell <david-b@pacbell.net> |
[PATCH] add rtc-omap driver This creates a new RTC-framework driver for the RTC/calendar module found in various OMAP1 chips. (OMAP2 and OMAP3 use external RTCs, like those in TI's multifunction PM companion chips.) It's been in the Linux-OMAP tree for several months now, and other trees before that, so it's quite stable. The most notable issue is that the OMAP IRQ code doesn't yet support the RTC IRQ as a wakeup event. Once that's fixed, a patch will be needed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
9e86ecb6 |
|
01-Oct-2006 |
David Brownell <david-b@pacbell.net> |
[PATCH] RTC class: Kconfig improvements Small updates to make the RTC class Kconfig text be more informative. This should help folk used to the drivers/char/rtc.c support, or a single RTC, be slightly less surprised by the differences. Also, adds a new RTC_DEBUG option to predefine DEBUG in the framework and its drivers, while debugging. That's getting to be a standard idiom, and it's pretty useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Oleg Verych <olecom@flower.upol.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
317a6104 |
|
27-Sep-2006 |
Paul Mundt <lethal@linux-sh.org> |
rtc: New RTC driver for SuperH On-Chip RTC. This replaces the old SH RTC driver, and allows us to clean quite a lot of things up on the board-specific side. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
#
7e56a7dc |
|
14-Jul-2006 |
Herbert Valerio Riedel <hvr@gnu.org> |
[PATCH] RTC subsystem, Add ISL1208 support Add support for the I2C-attached Intersil ISL1208 RTC chip. [akpm@osdl.org: cleanups, fixlets] Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1add6781 |
|
01-Jul-2006 |
Ben Dooks <ben@fluff.org.uk> |
[PATCH] RTC: class driver for Samsung S3C series SoC This is a renamed and tested version of the previous S3C24XX RTC class driver. The driver has been renamed from the original s3c2410-rtc, which is now too narrow for the range of devices supported. The rtc-s3c has been chosen as there is the distinct possibility of this driver being carried forward into newer Samsung SoC silicon. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
e0ac4761 |
|
28-Jun-2006 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
[PATCH] RTC: add rtc-rs5c348 driver Add an SPI driver for the Ricoh RS5C348 RTC chip. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
5ec3e4b7 |
|
25-Jun-2006 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
[PATCH] RTC: add rtc-ds1742 driver Add an RTC driver for the Dallas DS1742 RTC chip. [akpm@osdl.org: cleanups, compile fix] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
9bf5b4f5 |
|
25-Jun-2006 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
[PATCH] RTC: add rtc-ds1553 driver Add an RTC driver for the Dallas DS1553 RTC chip. [akpm@osdl.org: cleanups, compile fix] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
788b1fc6 |
|
25-Jun-2006 |
Andrew Victor <andrew@sanpeople.com> |
[PATCH] AT91RM9200 RTC driver Adds support for the RTC integrated in the Atmel AT91RM9200 SoC. Driver was originally written for 2.4 by Rick Bronson. Then converted to 2.6 ARM RTC API by Steven Scholz. Now converted to the RTC class model. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
362600fe |
|
25-Jun-2006 |
Raphael Assenat <raph@raphnet.net> |
[PATCH] Add v3020 RTC support This patch adds support for the v3020 RTC from EM Microelectronic. The v3020 RTC is designed to be connected on a bus using only one data bit. Since any data bit may be used, it is necessary to specify this to the driver by passing a struct v3020_platform_data pointer (see include/linux/rtc-v3020.h) to the driver. Part of the following code comes from the kernel patchs produced by Compulab for their products. The original file (available here: http://raph.people.8d.com/misc/emv3020.c) was released under the terms of the GPL license. [akpm@osdl.org: cleanups] Signed-off-by: Raphael Assenat <raph@raphnet.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
8e12ecc2 |
|
25-Jun-2006 |
Raphael Assenat <raph@raphnet.net> |
[PATCH] Add max6902 RTC support Add support for the MAX6902 SPI RTC chip. Tested on a pxa2xx cpu. The compulab code comes from the kernel patch the produce for their cn-x255 board. (inside a zip file on the http://www.compulab.co.il/x255/html/x255-developer.htm) The original file (drivers/char/max6902.c) was GPL, which is of course an appropriate licence: /* * max6902.c * * Driver for MAX6902 RTC * * Copyright (C) 2004 Compulab Ltd. * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * */ For reference, you can get the original file here: http://raph.people.8d.com/misc/max6902.c [akpm@osdl.org: cleanups] Signed-off-by: Raphael Assenat <raph@raphnet.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
9c0c5705 |
|
25-Jun-2006 |
G. Liakhovetski <gl@dsa-ac.de> |
[PATCH] drivers/acorn/char/pcf8583.[hc] vs. RTC subsystem A port of the driver for the pcf8583 i2c rtc controller to the generic RTC framework by Alessandro Zummo. Based on drivers/acorn/char/{pcf8583.[hc],i2c.c}. Hopefully, acorn can be converted too to use this driver in the future. Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1abb0dc9 |
|
25-Jun-2006 |
David Brownell <david-b@pacbell.net> |
[PATCH] "RTC-framework" driver for DS1307 and similar RTC chips This is an "RTC-framework" driver for DS1307 and similar RTC chips, It should be a full replacement for the existing ds1337.c driver (using the older RTC glue), giving a net increase in the number of RTC chips that work out-of-the-box. There's a whole cluster of RTCs that are very similar, but the 1337 driver was a bit too picky to work with most of them. Still no support for RTC alarm IRQs (on chips that support them). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
8ae6e163 |
|
25-Jun-2006 |
Deepak Saxena <dsaxena@plexity.net> |
[PATCH] Add driver for ARM AMBA PL031 RTC Add a driver for the ARM PL031 RTC found on some ARM SOCs. The driver is fairly trivial as the RTC only provides a read/write and alarm capability. [akpm@osdl.org: compile fix] Signed-off-by: Deepak <dsaxena@plexity.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
8417eb7a |
|
10-Apr-2006 |
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> |
[PATCH] RTC subsystem: VR41XX driver This patch updates VR4100 series RTC driver. * This driver supports new RTC subsystem. * Simple set time/read time test worked fine. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1d98af87 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: M48T86 driver Add a driver for the ST M48T86 / Dallas DS12887 RTC. This is a platform driver. The platform device must provide I/O routines to access the RTC. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
e842f1c8 |
|
27-Mar-2006 |
Richard Purdie <rpurdie@rpsys.net> |
[PATCH] RTC subsystem: SA1100/PXA2XX driver Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
fd507e2f |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: EP93XX driver This patch adds a driver for the RTC embedded in the Cirrus Logic EP93XX family of processors. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
7520b94d |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: RS5C372 driver RTC class aware driver for the Ricoh RS5C372 chip used, among others, on the Synology DS101. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
b5a82d62 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: PCF8563 driver An RTC class aware driver for the Philips PCF8563 RTC and Epson RTC8564 chips. This chip is used on the Iomega NAS100D. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
edf1aaa3 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: DS1672 driver Driver for the Dallas/Maxim DS1672 chip, found on the Loft (http://www.giantshoulderinc.com). Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
a95579cd |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: test device/driver Interrupts can be generated by echo "alarm|tick|update" >/sys/class/rtc/rtcX/device/irq Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1fec7c66 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: X1205 driver A port of the existing x1205 driver under the new RTC subsystem. It is actually under test within the NSLU2 project (http://www.nslu2-linux.org) and it is working quite well. It is the first driver under this new subsystem and should be used as a guide to port other drivers. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
e824290e |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: dev interface Add the dev interface to the RTC subsystem. Each RTC will be available under /dev/rtcX . A symlink from /dev/rtc0 to /dev/rtc cab be obtained with the following udev rule: KERNEL=="rtc0", SYMLINK+="rtc" Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
728a2947 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: proc interface Add the proc interface to the RTC subsystem. The first RTC driver which registers with the class will be accessible by /proc/driver/rtc . This is required for compatibility with the standard RTC driver and to avoid breaking any user space application which may erroneusly rely on this. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
c5c3e192 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: sysfs interface This patch adds the sysfs interface to the RTC subsystem. Each RTC client will have his own entry under /sys/classs/rtc/rtcN . Within this entry some attributes are exported by the subsystem, like date and time. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
0c86edc0 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC subsystem: class Add the basic RTC subsystem infrastructure to the kernel. rtc/class.c - registration facilities for RTC drivers rtc/interface.c - kernel/rtc interface functions rtc/hctosys.c - snippet of code that copies hw clock to sw clock at bootup, if configured to do so. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
c58411e9 |
|
27-Mar-2006 |
Alessandro Zummo <a.zummo@towertech.it> |
[PATCH] RTC Subsystem: library functions RTC and date/time related functions. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|