remoteproc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: wcnss: Fix race with iris probe

The remoteproc driver is split between the responsibilities of getting
the SoC-internal ARM core up and running and the external RF (aka
"Iris") part configured.

In order to satisfy the regulator framework's need of a struct device *
to look up supplies this was implemented as two different drivers, using
of_platform_populate() in the remoteproc part to probe the iris part.

Unfortunately it's possible that the iris part probe defers on yet not
available regulators and an attempt to start the remoteproc will have to
be rejected, until this has been resolved. But there's no useful
mechanism of knowing when this would be.

Instead replace the of_platform_populate() and the iris probe with a
function that rolls its own struct device, with the relevant of_node
associated that is enough to acquire regulators and clocks specified in
the DT node and that may propagate the EPROBE_DEFER back to the wcnss
device's probe.

Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: Anibal Limon <anibal.limon@linaro.org>
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Anibal Limon <anibal.limon@linaro.org>
Link: https://lore.kernel.org/r/20210312002251.3273013-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom_wcnss: Add qcom,wcn3660b compatible

WCN3660B is a variant of WCN3660, but with the same regulator
requirements as WCN3620/WCN3680. As far as qcom_wcnss_iris is
concerned we can just use qcom,wcn3680 (wcn3680_data).

However, a separate compatible is needed for WCN3660B because
the wcn36xx driver uses it to enable chip-specific functionality.
In particular, it enables 802.11ac for qcom,wcn3680 which is not
supported by WCN3660B.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210106102134.59801-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: qcom_wcnss: Fix circular module dependency

The tie between the main WCNSS driver and the IRIS driver causes a
circular dependency between the two modules. Neither part makes sense to
have on their own so lets merge them into one module.

For the sake of picking up the clock and regulator resources described
in the iris of_node we need an associated struct device. But, to keep
the size of the patch down we continue to represent the IRIS part as its
own platform_driver, within the same module, rather than setting up a
dummy device.

Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: wcnss_iris: Fix module autoload

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/remoteproc/qcom_wcnss_iris.ko | grep alias
$

After this patch:

$ modinfo drivers/remoteproc/qcom_wcnss_iris.ko | grep alias
alias: of:N*T*Cqcom,wcn3680C*
alias: of:N*T*Cqcom,wcn3680
alias: of:N*T*Cqcom,wcn3660C*
alias: of:N*T*Cqcom,wcn3660
alias: of:N*T*Cqcom,wcn3620C*
alias: of:N*T*Cqcom,wcn3620

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Introduce WCNSS peripheral image loader

This introduces the peripheral image loader, for loading WCNSS firmware
and boot the core on e.g. MSM8974. The firmware is verified and booted
with the help of the Peripheral Authentication System (PAS) in
TrustZone.

Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>