remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP

The UEFI loads a lite variant of the ADSP firmware to support charging
use cases. The kernel needs to unload and reload it with the firmware
that has full feature support for audio. This patch arbitarily shutsdown
the lite firmware before loading the full firmware.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240212-x1e80100-remoteproc-v2-3-604614367f38@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP

Add support for PIL loading on ADSP and CDSP on X1E80100 SoCs.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240212-x1e80100-remoteproc-v2-2-604614367f38@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper

Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123184632.725054-5-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: correct data indentation

Correct indentation of several struct adsp_data instances to always use
a single TAB character instead of two.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-4-6858fa1ac1c8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: Add SM8650 remoteproc support

Add DSP Peripheral Authentication Service support for the SM8650 platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-3-61283f50162f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: make region assign more generic

The current memory region assign only supports a single
memory region.

But new platforms introduces more regions to make the
memory requirements more flexible for various use cases.
Those new platforms also shares the memory region between the
DSP and HLOS.

To handle this, make the region assign more generic in order
to support more than a single memory region and also permit
setting the regions permissions as shared.

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-2-61283f50162f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS

Add support for the ADSP, CDSP and WPSS remoteprocs found on the SC7280
SoC using the q6v5-pas driver.

This driver can be used on regular LA ("Linux Android") based releases,
however the SC7280 ChromeOS devices need different driver support due to
firmware differences.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-6-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: Add SM6375 MPSS

Add a config for the MPSS present on SM6375.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230725-topic-6375_rproc-v5-3-a8e9cde56a20@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: Add SM6375 ADSP & CDSP

Add a config for the ADSP&CDSP present on SM6375.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230725-topic-6375_rproc-v5-2-a8e9cde56a20@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: Add sc7180 adsp

sc7180 has a dedicated ADSP similar to the one found in sm8250.
Add it's compatible to the driver reusing the existing config so
the devices that use the adsp can probe it.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230907-sc7180-adsp-rproc-v3-2-6515c3fbe0a3@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: add SDM845 SLPI compatible

Add a compatible for the SDM845 SLPI to the Qualcomm remoteproc q6v5_pas
driver. The SLPI is the same as in SM8150, SM8250, SM8350, and SM8450,
so use the same resource in the driver.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230330164633.117335-4-me@dylanvanassche.be
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: pas: refactor SLPI remoteproc init

SLPI remoteproc initialization is the same for SDM845, SM8150, SM8250,
SM8350 but is duplicated for each compatible. Refactor initialization
structs for these 4 compatibles as a single struct.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230330164633.117335-3-me@dylanvanassche.be
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: Add full coredump fallback mechanism

If a remoteproc's firmware does not support minidump but the driver
adds an ID, the minidump driver does not collect any coredumps when
the remoteproc crashes. This hinders the purpose of coredump
collection. This change adds a fallback mechanism in the event of a
crash.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Link: https://lore.kernel.org/r/20230224211707.30916-3-quic_gokukris@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom: Use of_reserved_mem_lookup()

Reserved memory can be either looked up using the generic function
of_address_to_resource() or using the special of_reserved_mem_lookup().
The latter has the advantage that it ensures that the referenced memory
region was really reserved and is not e.g. status = "disabled".

of_reserved_mem also supports allocating reserved memory dynamically at
boot time. This works only when using of_reserved_mem_lookup() since
there won't be a fixed address in the device tree.

Switch the code to use of_reserved_mem_lookup(), similar to
qcom_q6v5_wcss.c which is using it already. There is no functional
difference for static reserved memory allocations.

While at it this also adds two missing of_node_put() calls in
qcom_q6v5_pas.c.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # SDM845
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230710-rproc-of-rmem-v3-1-eea7f0a33590@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()

adsp_segment_dump() is not used outside of this unit, so add missing
static to fix:

drivers/remoteproc/qcom_q6v5_pas.c:108:6: warning: no previous prototype for ‘adsp_segment_dump’ [-Wmissing-prototypes]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507144826.193067-1-krzysztof.kozlowski@linaro.org

remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

remoteproc: Remove unnecessary (void*) conversions

Pointer variables of void * type do not require type cast.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20230328024907.29791-1-yuzhe@nfschina.com
[Fixed merge conflict in xlnx_r5_remoteproc.c]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

firmware: qcom_scm: Use fixed width src vm bitmap

The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.

Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k)
Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com

remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot

Set the SM8550 adsp & cdsp auto_boot to true to match the behavior
of the previous platforms.

Fixes: 7eddedc97563 ("remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8550-upstream-fix-remoteproc-autoboot-v1-1-11445a0c27c6@linaro.org

remoteproc: qcom: pas: Add sm6115 remoteprocs

Among the subsystems in the Qualcomm sm6115 platform we find
audio, compute and modem DSPs.

Add support for controlling these using the peripheral
authentication service (PAS) remoteproc driver.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230128053504.2099620-1-bhupesh.sharma@linaro.org

remoteproc: qcom: pas: Adjust the phys addr wrt the mem region

The minidump table in the toc contains physical addresses that may lie
before the physical address of the first elf segment in relocatable
images. This change adds a custom dump function for minidumps which
calculates the offset into the carveout region using the start of
the physical address instead of the start of the first elf segment.

Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667409129-6254-1-git-send-email-quic_ylal@quicinc.com

firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/

Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.

Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com

remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data

This adds the compatible & data for the aDSP, cDSP and MPSS found in
the SM8550 SoC.

This platform requires the "Devicetree" firmware to be loaded along the
main firmware.

The MPSS DSM memory to be assigned to the MPSS subsystem is the
third memory-region entry as defined in the bindings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-5-54154c08c0b7@linaro.org

remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware

Starting with SM8550, the DSM memory must now be shared to the
firmware by the APPS process instead of being defined in the
carveout memory reserved for MPSS.

In order to handle that, add a region_assign_idx in adsp_data
to specify with index of memory-region must be assigned to
the MPSS via the qcom_scm_assign_mem() call at probe time.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-4-54154c08c0b7@linaro.org

remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading

Starting from the SM8550 SoC, starting the aDSP, cDSP and MPSS will
require loading a separate "Devicetree" firmware.

In order to satisfy the load & authentication order required by the SM8550
SoC, the following is implemented:
- "Devicetree" firmware request & load in dedicated memory
- Q6V5 prepare
- Power Domain & Clocks enable
- "Devicetree" firmware authentication
- Main firmware load in dedicated memory
- Main firmware authentication
- Q6V5 startup
- "Devicetree" firmware metadata release
- Main metadata release

When booting older platforms, the "Devicetree" steps would be
bypassed and the load & authentication order would still be valid.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-3-54154c08c0b7@linaro.org

remoteproc: qcom: pas: Fix subdevice add order

Currently, the notification like QCOM_SSR_BEFORE_SHUTDOWN is not exactly
sent before starting shutdown activity on remote subsystem but it is
getting sent after sysmon shutdown request to remote.

On getting QCOM_SSR_BEFORE_SHUTDOWN, some client want remote subsystem
to be alive to communicate but as sysmon shutdown request is getting
sent to remote before QCOM_SSR_BEFORE_SHUTDOWN notification sent to
kernel client due to which remote is not in a condition to communicate
with kernel clients.

Fixing the subdevice ordering will fix this as ssr subdevice will be
first one to get triggered in shutdown/stop path.

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1671024983-22634-1-git-send-email-quic_mojha@quicinc.com

remoteproc: qcom: pas: Add MSM8953 ADSP PIL support

Add support for the Audio DSP PIL found on the Qualcomm MSM8953
platform. The same configuration is used on all SoCs based on the
MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053).

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013042749.104668-2-sireeshkodali1@gmail.com

remoteproc: qcom: q6v5: Use _clk_get_optional for aggre2_clk

Only msm8996 and msm8998 SLPIs need the RPM_SMD_AGGR2_NOC_CLK
(as aggre2 clock). None of the other platforms do. Back when the support
for the mentioned platforms was added to the q6v5 pass driver, the
devm_clk_get_optional was not available, so the has_aggre2_clk was
necessary in order to differentiate between plaforms that need this
clock and those which do not. Now that devm_clk_get_optional is available,
we can drop the has_aggre2_clk. This makes the adsp_data more cleaner
and removes the check within adsp_init_clocks.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718121514.2451590-1-abel.vesa@linaro.org

remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()

The pointer node is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com

remoteproc: qcom_q6v5_pas: detach power domains on remove

We need to detach from the power domains also on remove, not just on
probe fail so a subsequent probe works as expected.

Otherwise the following error appears on re-probe:

[ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
[ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
[ 29.510319] Hardware name: Fairphone 4 (DT)
[ 29.538335] Call trace:
[ 29.564470] dump_backtrace.part.0+0xe0/0xf0
[ 29.592602] show_stack+0x18/0x30
[ 29.619616] dump_stack_lvl+0x64/0x80
[ 29.646834] dump_stack+0x18/0x34
[ 29.673541] sysfs_warn_dup+0x60/0x7c
[ 29.700592] sysfs_create_dir_ns+0xec/0x110
[ 29.728057] kobject_add_internal+0xb8/0x374
[ 29.755530] kobject_add+0x9c/0x104
[ 29.782072] device_add+0xbc/0x8a0
[ 29.808445] device_register+0x20/0x30
[ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
[ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
[ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
[ 29.918212] adsp_probe+0x278/0x580
[ 29.944384] platform_probe+0x68/0xc0
[ 29.970603] really_probe+0xbc/0x2dc
[ 29.996662] __driver_probe_device+0x78/0xe0
[ 30.023491] device_driver_attach+0x48/0xac
[ 30.050215] bind_store+0xb8/0x114
[ 30.075957] drv_attr_store+0x24/0x3c
[ 30.101874] sysfs_kf_write+0x44/0x54
[ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
[ 30.154448] vfs_write+0x1ac/0x380
[ 30.179937] ksys_write+0x70/0x104
[ 30.205274] __arm64_sys_write+0x1c/0x2c
[ 30.231060] invoke_syscall+0x48/0x114
[ 30.256594] el0_svc_common.constprop.0+0x44/0xec
[ 30.283183] do_el0_svc+0x2c/0xd0
[ 30.308320] el0_svc+0x2c/0x84
[ 30.333059] el0t_64_sync_handler+0xf4/0x120
[ 30.359001] el0t_64_sync+0x18c/0x190
[ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
[ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17

Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-2-luca.weiss@fairphone.com

remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove

Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
the subsequent probe fail.

[ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
[ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
[ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
[ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
[ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17

Fix this by disabling wakeup in both cases so the driver can properly
probe on the next try.

Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-1-luca.weiss@fairphone.com

remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found

devm_regulator_get_optional() API will return -ENODEV if the regulator was
not found. For the optional supplies CX, PX we should not fail in that case
but rather continue. So let's catch that error and continue silently if
those regulators are not found.

The commit 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with
optional px and cx regulators") was supposed to do the same but it missed
the fact that devm_regulator_get_optional() API returns -ENODEV when the
regulator was not found.

Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220801053939.12556-1-manivannan.sadhasivam@linaro.org

remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators

Use _get_optional as some platforms might not provide the px
and cx regulators. This avoids printing the following for each
unavailable regulator:

[ 4.350229] qcom_q6v5_pas 5c00000.remoteproc: supply cx not found,
using dummy regulator
[ 4.374224] qcom_q6v5_pas 5c00000.remoteproc: supply px not found,
using dummy regulator

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713152835.3848875-1-abel.vesa@linaro.org

remoteproc: qcom: pas: Check if coredump is enabled

Client drivers need to check if coredump is enabled for the rproc before
continuing with coredump generation. This change adds a check in the PAS
driver.

Fixes: 8ed8485c4f05 ("remoteproc: qcom: Add capability to collect minidumps")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-5-git-send-email-quic_sibis@quicinc.com

remoteproc: qcom: pas: Mark devices as wakeup capable

device_wakeup_enable() on its own is not capable of setting
device as wakeup capable, it needs to be used in conjunction
with device_set_wakeup_capable(). The device_init_wakeup()
calls both these functions on the device passed.

Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-4-git-send-email-quic_sibis@quicinc.com

remoteproc: qcom: pas: Mark va as io memory

The pas driver remaps the entire carveout region using the dev_ioremap_wc()
call, which is then used in the adsp_da_to_va() calls made by the rproc
framework. This change marks the va returned by this call as an iomem va.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-3-git-send-email-quic_sibis@quicinc.com

remoteproc: qcom: pas: Add decrypt shutdown support for modem

The initial shutdown request to modem on SM8450 SoCs would start the
decryption process and will keep returning errors until the modem shutdown
is complete. Fix this by retrying shutdowns in fixed intervals.

Err Logs on modem shutdown:
qcom_q6v5_pas 4080000.remoteproc: failed to shutdown: -22
remoteproc remoteproc3: can't stop rproc: -22

Fixes: 5cef9b48458d ("remoteproc: qcom: pas: Add SM8450 remoteproc support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-2-git-send-email-quic_sibis@quicinc.com

remoteproc: qcom: pas: Add MSM8226 ADSP support

Add a config for the ADSP present on MSM8226.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220423155059.660387-2-luca@z3ntu.xyz

remoteproc: qcom: pas: Add sc8280xp remoteprocs

Among the subsystems in the Qualcomm sc8280xp platform we find an audio
and two compute DSPs. Add support for controlling these using the
peripheral authentication service (PAS) remoteproc driver.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220408220539.625301-2-bjorn.andersson@linaro.org

remoteproc: qcom: pas: Add SM8450 remoteproc support

Add audio, compute, sensor and modem remoteproc compatibles to the PAS
remoteproc driver. The resources needed for each one matches those of
SM8350, so its descs are reused.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-12-bjorn.andersson@linaro.org

remoteproc: qcom: pas: Carry PAS metadata context

Starting with Qualcomm SM8450 the metadata object shared with the secure
world during authentication and booting of a remoteproc needs to be
alive from init_image() until auth_and_reset().

Use the newly introduced "PAS metadata context" object to track this
context from load until the firmware has been booted.

In the even that load is performed but the process for some reason
doesn't reach auth_and_reset the unprepare callback is used to clean up
the allocated memory.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-10-bjorn.andersson@linaro.org

remoteproc: qcom: pas: Add SM6350 CDSP support

Add a config for the CDSP present on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-7-luca.weiss@fairphone.com

remoteproc: qcom: pas: Add SM6350 ADSP support

Add a config for the ADSP present on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-5-luca.weiss@fairphone.com

remoteproc: qcom: pas: Add SM6350 MPSS support

Add a config for the MPSS present on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-3-luca.weiss@fairphone.com

remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP

Add missing power-domain "mxc" required by CDSP PAS remoteproc on SM8350
SoC.

Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Cc: stable@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1624559605-29847-1-git-send-email-sibis@codeaurora.org

remoteproc: qcom: pas: Add SC7280 Modem support

Add support for booting the Modem DSP found on QTI SC7280 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-3-git-send-email-sibis@codeaurora.org

remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998

The resources for MSM8996 are missing power domains, and adding them
makes the resources identical to the MSM8998 ones.
Rename msm8998_adsp_resource to msm8996_adsp_resource then use it
for both chips. Also add power domains to slpi_resource_init and use
it for both chips.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-3-y.oudjana@protonmail.com

remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state

The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence.

These co-processors enter low-power modes independent to that of the
application processor and the load state resources linked to them are
expected to remain unaltered across system suspend/resume cycles. To
achieve this behavior lets stop using the power-domains exposed by the
AOSS QMP node and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Fixed up build error in q6v5_wcss_remove()]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-5-git-send-email-sibis@codeaurora.org

remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatible

This chipset seems to work fine with the "generic" configuration.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728215212.18217-2-konrad.dybcio@somainline.org
[bjorn: Use "-pas" suffix for remoteprocs using TrustZone]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpss

The Qualcomm SC8180X has the typical ADSP, CDSP and MPSS remote
processors operated using the PAS interface, add support for these.

Attempts to configuring mss.lvl is failing, so a new adsp_data is
provided that skips this resource, for now.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210608174944.2045215-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add modem support for SDX55

Add remoteproc support for Hexagon modem found on the Qualcomm SDX55
platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408171211.92141-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: add is_iomem to da_to_va

Introduce an extra parameter is_iomem to da_to_va, then the caller
could take the memory as normal memory or io mapped memory.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add SM8350 PAS remoteprocs

Add audio, compute, modem and sensor DSP resources to the Qualcomm PAS
driver.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210210104539.340349-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: fix error handling in adsp_pds_enable

If the pm_runtime_get_sync failed in adsp_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:

1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak.

2) Have not reset pds[i] performance state.

Then we fix it.

Fixes: 17ee2fb4e8567 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143554.144707-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Add minidump id for sm8150 modem

Add minidump id for modem in sm8150 chipset so that the regions to be
included in the coredump generated upon a crash is based on the minidump
tables in SMEM instead of those in the ELF header.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by, Reviewed-by or Tested-by that you received previously.:
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1605819935-10726-5-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Add capability to collect minidumps

This patch adds support for collecting minidump in the event of remoteproc
crash. Parse the minidump table based on remoteproc's unique minidump-id,
read all memory regions from the remoteproc's minidump table entry and
expose the memory to userspace. The remoteproc platform driver can choose
to collect a full/mini dump by specifying the coredump op.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Co-developed-by: Gurbir Arora <gurbaror@codeaurora.org>
Signed-off-by: Gurbir Arora <gurbaror@codeaurora.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1605819935-10726-4-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: q6v5: Query sysmon before graceful shutdown

Requesting a graceful shutdown through the shared memory state signals
will not be acked in the event that sysmon has already successfully shut
down the remote firmware. So extend the stop request API to optionally
take the remoteproc's sysmon instance and query if there's already been
a successful shutdown attempt, before doing the signal dance.

Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20201122054135.802935-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Update PIL relocation info on load

Update the PIL relocation information in IMEM with information about
where the firmware for various remoteprocs are loaded.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: core: Prevent system suspend during remoteproc recovery

The system might go into suspend during recovery of any remoteproc.
This will interrupt the recovery process in between increasing the
recovery time. Make the platform device as wakeup capable and
use pm_stay_wake/pm_relax APIs to avoid system from going into
suspend during recovery.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1588183482-21146-1-git-send-email-rishabhb@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add SM8250 PAS remoteprocs

Add audio, compute and sensor DSP compatibles to the Qualcomm PAS
binding and driver.

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200430180051.3795305-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add SC7180 Modem support

Add support for booting the Modem DSP found on Qualcomm's SC7180 SoCs.

Tested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200421143228.8981-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Pass ssr_name to glink subdevice

Pass ssr_name to glink subdevice in preparation for tying glink_ssr to
the glink subdevice, rather than having its own "ssr subdevice".

Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: use rproc_coredump_set_elf_info in drivers

Modify drivers which are using remoteproc coredump functionality to use
rproc_coredump_set_elf_info in order to create correct elf coredump
format.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Link: https://lore.kernel.org/r/20200410102433.2672-3-cleger@kalray.eu
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Introduce panic handler for PAS and ADSP

Make the PAS and ADSP/CDSP remoteproc drivers implement the panic
handler that will invoke a stop to prepare the remoteprocs for post
mortem debugging.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200324052904.738594-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: Use size_t type for len in da_to_va

With upcoming changes in elf loader for elf64 support, section size will
be a u64. When used with da_to_va, this will potentially lead to
overflow if using the current "int" type for len argument. Change
da_to_va prototype to use a size_t for len and fix all users of this
function.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Link: https://lore.kernel.org/r/20200302093902.27849-2-cleger@kalray.eu
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support

Add support for booting the Audio and Sensor DSPs found in
Qualcomm's MSM8998 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191218132217.28141-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add auto_boot flag

Add auto_boot flag and set it to false for modem. This allows for
the delayed boot up of modem after the dependencies are met in
userspace.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/0101016e80790f6a-98fb016c-9639-4124-b6ee-fe7639af734f-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support

Add support for booting the Modem, Audio, Compute and Sensor DSPs found on
Qualcomm's SM8150 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/0101016e8078ecaa-5ec3bf83-d23a-4ebe-a9a4-a5d08c357ae3-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Vote for active/proxy power domains

On SM8150 SoCs ADSP, CDSP and MPSS need to proxy vote on multiple
rpmh ARC resources and active vote on QMP AOSS Power domains. Add
support to vote for multiple active and proxy power domains.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/0101016e8078a71a-9ae99638-9e15-49a5-b769-85552526ae89-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Disable interrupt on clock enable failure

Disable handover smp2p interrupt on "xo" clock prepare enable failure.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/0101016e80787f5e-e7b2e8af-a398-4fb4-ae27-a5f251d1f9cc-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: qcom: Add support for parsing fw dt bindings

Add support for parsing "firmware-name" dt bindings which specifies
the relative paths of mba/modem/pas image as strings. Fallback to
the default paths for mba/modem/pas image on -EINVAL.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Add shutdown-ack irq

Add shutdown-ack irq handling required for sysmon shutdown for
Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: Revert back to qcom_add_sysmon_subdev returning a sysmon object]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: pas: Add QCS404 remoteprocs

Add compatibles for the three PAS based remote processors found in
QCS404.

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

remoteproc: qcom: Rename Hexagon v5 PAS driver

The Hexagon v5 ADSP driver is used for more than only the ADSP and
there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to
qcom_q6v5_pas in order to better suite this.

Cc: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>