platform/x86: touchscreen_dmi: Add an extra entry for a variant of the Chuwi Vi8 tablet

Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Link: https://lore.kernel.org/r/20240227223919.11587-1-alban.boye@protonmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data

Now that prefix matches for ACPI names are supported, the ts_dmi_data
structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into
a single match matching on "GDIX1001".

For consistency also change gdix1002_00_upside_down_data to match.

Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names

On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.

This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".

Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".

Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.

Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet

Add touch screen info for TECLAST X16 Plus tablet.

Signed-off-by: Phoenix Chen <asbeltogf@gmail.com>
Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add info for the Positivo C4128B

Add information for the Positivo C4128B, a notebook/tablet convertible.

Link: https://github.com/onitake/gsl-firmware/pull/217
Signed-off-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com>
Link: https://lore.kernel.org/r/20231004235900.426240-1-japareaggae@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add info for the BUSH Bush Windows tablet

Add touchscreen info for the BUSH Bush Windows tablet.

It was tested using gslx680_ts_acpi module and on patched kernel
installed on device.

Link: https://github.com/onitake/gsl-firmware/pull/215
Link: https://github.com/systemd/systemd/pull/29268
Signed-off-by: Tomasz Swiatek <swiatektomasz99@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet

Fix the axes and add home button support as suggested by Hans de Goede.

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230714105117.192938-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet

Add info for the Archos 101 Cesium Educ tablet
It was tested using gslx680_ts_acpi module
PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230707141425.21473-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add info for the Dexp Ursus KX210i

Add touchscreen info for the Dexp Ursus KX210i

Signed-off-by: Andrey Avdeev <jamesstoun@gmail.com>
Link: https://lore.kernel.org/r/ZE4gRgzRQCjXFYD0@avdeevavpc
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add upside-down quirk for GDIX1002 ts on the Juno Tablet

The Juno Computers Juno Tablet has an upside-down mounted Goodix
touchscreen. Add a quirk to invert both axis to correct for this.

Link: https://junocomputers.com/us/product/juno-tablet/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230505210323.43177-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match

Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet,
pointing to the same chuwi_vi8_data as the existing CWI506 version
DMI match.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD

Add touchscreen info for the CSL Panther Tab HD.

Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1

Add touchscreen info for the RCA Cambio W101 v2 2-in-1.

Link: https://github.com/onitake/gsl-firmware/discussions/193
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221025141131.509211-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1

Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1.

Signed-off-by: Yuka Kawajiri <yukx00@gmail.com>
Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry

The Glavey TM800A550L tablet is a tablet which ships with Android as
factory OS. As such it has the typical broken DSDT which x86 Android
tablets tend to have.

Specifically the touchscreen ACPI device node is missing the IRQ for
the touchscreen. So far users were expected to fix this with a DSDT
overlay, but support for the TM800A550L has been added to the new
x86-android-modules kernel-module and that will now automatically
instantiate a proper i2c-client with the IRQ set for the touchscreen,
including the necessary device-properties for the firmware loading.

This means that the touchscreen_dmi entry for the TM800A550L is
no longer necessary (and it no longer matches either since the
touchscreen is no longer enumerated through ACPI), remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220103112700.111414-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro

Both the Chuwi Hi10 Plus (CWI527) and the Chuwi Hi10 Pro (CWI529) tablets
support being used together with the Hi H2 pen.

Add the necessary properties to enable the new support for this in the
silead touchscreen driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225120247.95380-2-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet

The firmware distributed as part of the Windows and Android drivers uses
significantly different min and max values for the x- and y-axis,
compared to the EFI's embedded touchscreen firmware.

The difference is large enough that e.g. typing on an onscreen keyboard
results in the wrong "keys" getting pressed.

Adjust the values to match those of the firmware distributed with the
Windows and Android drivers (which is necessary for pen support) and
put the EFI-fw version's min/max values in the new "silead,efi-fw-min-max"
property. The silead driver will use these when it is using the
EFI embedded firmware, so as to not regress functionality in that case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225120247.95380-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add TrekStor SurfTab duo W1 touchscreen info

The TrekStor SurfTab duo W1 (ST10432-10b) has a Goodix touchscreen which
has its x-axis mirrored.

Add a quirk to fix this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211124175125.250329-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add TrekStor SurfTab duo W1 touchscreen info

The TrekStor SurfTab duo W1 (ST10432-10b) has a Goodix touchscreen which
has its x-axis mirrored.

Add a quirk to fix this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211124175125.250329-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Viglen Connect 10 tablet

Add touchscreen info for the Viglen Connect 10 tablet.

Signed-off-by: Mark Stamp <stamp497@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211028094824.84292-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet

Add info for getting the firmware directly from the UEFI for the Chuwi Hi10
Plus (CWI527), so that the user does not need to manually install the
firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Also tweak the min and width/height values a bit for more accurate position
reporting.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet

Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Fix Chuwi Hi10 Pro comment

Fix the comment on the entry for the Chuwi Hi10 Pro tablet:
1. Replace "Prus" type with "Pro".
2. Fix the model number, the Chuwi Hi10 Pro is the CWI529, not the CWI597.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210530104744.6720-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of TM800A550L tablets

The Bay Trail Glavey TM800A550L tablet, which ships with Android installed
from the factory, uses a GT912 touchscreen controller which needs to have
its firmware uploaded by the OS to work (this is a first for a x86 based
device with a Goodix touchscreen controller).

Add a touchscreen_dmi entry for this which specifies the filenames
to use for the firmware and config files needed for this.

Note this matches on a GDIX1001 ACPI HID, while the original DSDT uses
a HID of GODX0911. For the touchscreen to work on these devices a DSDT
override is necessary to fix a missing IRQ and broken GPIO settings in
the ACPI-resources for the touchscreen. This override also changes the
HID to the standard GDIX1001 id typically used for Goodix touchscreens.
The DSDT override is available here:
https://fedorapeople.org/~jwrdegoede/glavey-tm800a550l-dsdt-override/

Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-5-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets

Teclast X89 tablets come in 2 versions, with Windows pre-installed and with
Android pre-installed. These 2 versions have different DMI strings.

Add a match for the DMI strings used by the Android version BIOS.

Note the Android version BIOS has a bug in the DSDT where no IRQ is
provided, so for the touchscreen to work a DSDT override fixing this
is necessary as well.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-4-hdegoede@redhat.com

Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c

Move the DMI quirks for upside-down mounted Goodix touchscreens from
drivers/input/touchscreen/goodix.c to
drivers/platform/x86/touchscreen_dmi.c,
where all the other x86 touchscreen quirks live.

Note the touchscreen_dmi.c code attaches standard touchscreen
device-properties to an i2c-client device based on a combination of a
DMI match + a device-name match. I've verified that the: Teclast X98 Pro,
WinBook TW100 and WinBook TW700 uses an ACPI devicename of "GDIX1001:00"
based on acpidumps and/or dmesg output available on the web.

This patch was tested on a Teclast X89 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-2-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet

Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210520093228.7439-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet

Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet.
Tested on 5.11 hirsute.
Note: it's hw clone to Wintron surftab 7.

Signed-off-by: Teava Radu <rateava@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-6-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet

Add touchscreen info for the Teclast Tbook 11 tablet. This includes info
for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417173105.4134-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Handle device properties with software node API

The old device property API (device_add_properties()) is
going to be removed. Replacing the it with the software node
API equivalent, device_create_managed_software_node().

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210304082023.17689-1-heikki.krogerus@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: touchscreen_dmi: Add info for the Jumper EZpad 7 tablet

Add touchscreen info for the Jumper EZpad 7 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210128113653.5442-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet

The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen,
with the X and Y coordinates swapped compared to the LCD panel.

Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y"
device-property to the i2c-client instantiated for this device before
the driver binds.

This is the first entry of a Goodix touchscreen to touchscreen_dmi.c,
so far DMI quirks for Goodix touchscreen's have been added directly
to drivers/input/touchscreen/goodix.c. Currently there are 3
DMI tables in goodix.c:
1. rotated_screen[] for devices where the touchscreen is rotated
180 degrees vs the LCD panel
2. inverted_x_screen[] for devices where the X axis is inverted
3. nine_bytes_report[] for devices which use a non standard touch
report size

Arguably only 3. really needs to be inside the driver and the other
2 cases are better handled through the generic touchscreen DMI quirk
mechanism from touchscreen_dmi.c, which allows adding device-props to
any i2c-client. Esp. now that goodix.c is using the generic
touchscreen_properties code.

Alternative to the approach from this patch we could add a 4th
dmi_system_id table for devices with swapped-x-y axis to goodix.c,
but that seems undesirable.

Cc: Bastien Nocera <hadess@hadess.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201224135158.10976-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet

Add touchscreen info for the Irbis TW118 tablet.

Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet

Add touchscreen info for the Predia Basic tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet

Add touchscreen info for the Irbis TW118 tablet.

Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet

Add touchscreen info for the Predia Basic tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com

platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1

Add touchscreen info for the MPMAN Converter9 2-in-1. This device uses the
same case as the ITworks TW891, but it uses a different digitizer, so it
needs its own firmware.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry

Add minimum values for the x and y axis, correct the max value for the
x-axis and add support for the capacitive home-button these tablets have.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B

Add touchscreen info for the Trekstor Yourbook C11B. It seems to
use the same touchscreen as the Primebook C11, so we only add a new DMI
match.

Cc: Otmar Meier <otmarjun.meier@nexgo.de>
Reported-and-tested-by: Otmar Meier <otmarjun.meier@nexgo.de>
Signed-off-by: Bernhard Übelacker <bernhardu@mailbox.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Drop comma in terminator line

There is no need to have comma in terminator line. This will help
to find a potentially broken entries, due to placing after it,
during compilation time.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: add Vinga J116 touchscreen

Add support for Vinga Twizzle J116 Silead touchscreen which uses GSL1680 chip.

Signed-off-by: Andrew Dunai <a@dun.ai>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the ONDA V891 v5 tablet

Add touchscreen info for the ONDA V891 v5 tablet.

Signed-off-by: Maksim Karasev <karasevm98@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add touchscreen info for techBite Arc 11.6.

Add touchscreen info for techBite Arc 11.6.

Signed-off-by: Wiktor Ciurej <wiktor.ciurej@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the MP-man MPWIN895CL tablet

Add touchscreen info for the MP-man MPWIN895CL tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet

Add touchscreen info for the Chuwi Vi8 Plus tablet. This tablet uses a
Chipone ICN8505 touchscreen controller, with the firmware used by the
touchscreen embedded in the EFI firmware.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-11-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: touchscreen_dmi: Add EFI embedded firmware info support

Sofar we have been unable to get permission from the vendors to put the
firmware for touchscreens listed in touchscreen_dmi in linux-firmware.

Some of the tablets with such a touchscreen have a touchscreen driver, and
thus a copy of the firmware, as part of their EFI code.

This commit adds the necessary info for the new EFI embedded-firmware code
to extract these firmwares, making the touchscreen work OOTB without the
user needing to manually add the firmware.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-10-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: touchscreen_dmi: Fix indentation in several places

1. Put on one line PROPERTY_ENTRY_STRING("firmware-name", ...) lines. In most
cases this doesn't over the limit, the rest is pretty much obvious from
reading point of view.
2. Put on one line DMI_MATCH() parameters, we already have over the limit lines.
3. Reduce indentation of function parameters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the PiPO W11 tablet

Add touchscreen info for the PiPO W11 tablet.

Signed-off-by: Tim Josten <timjosten@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet

Add touchscreen info for the Jumper EZpad 6 m4 tablet.

Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen platform data for the Schneider SCT101CTM tablet

Add touchscreen platform data for the Schneider SCT101CTM tablet

Signed-off-by: Daniel Gorbea <danielgorbea@hotmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1

Add touchscreen info for the Trekstor Primebook C11B 2-in-1, note the C11B
used the same touchscreen as the regular C11, so we only add a new DMI
match.

Cc: Thomas Hiller <thomas.hiller@gmx.de>
Reported-and-tested-by: Thomas Hiller <thomas.hiller@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Irbis TW90 tablet

Add touchscreen info for the Irbis TW90 tablet.

Reported-by: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Chuwi Surbook Mini tablet

Add touchscreen platform data for the Chuwi Surbook Mini tablet.

Signed-off-by: Giang Le <ohaibuzzle@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Update Hi10 Air filter

Turns out the Hi10 Air is built by multiple companies so using Hampoo
as a filter is not enough to cover all variants.

This has been verified as working on the Hampoo and Morshow version.

Signed-off-by: Christian Oder <me@myself5.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Plus tablet.

Added touch screen info for CHUWI Hi10 Plus tablet.

Signed-off-by: Daniel Smith <danct12@disroot.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: touchscreen_dmi: Add info for 'jumper ezpad 6 pro b' touchscreen

Add touchscreen platform data for the 'jumper ezpad 6 pro b' touchscreen.

Signed-off-by: Benjamin Renz <appswert@gmail.com>
[hdegoede@redhat.com: Cleanup commit msg, fix some checkpatch warnings]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for Myria MY8307 2-in-1

Add touchscreen platform data for the Myrya MY8307 2-in-1 laptop.

Signed-off-by: Gabriel Lazar <gabriel.lazar@com.utcluj.ro>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet

Add touchscreen info for the CHUWUI Hi10 Air tablet.

Signed-off-by: Christian Oder <me@myself5.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet

Add touchscreen platform data for the Chuwi Hi8 Air tablet.

Signed-off-by: Kai Renzig <k.renzig@gmail.com>
[andy: fixed driver name and rewrote subject]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the PoV Wintab P1006w (v1.0) tablet

Add touchscreen info for the Point of View Wintab P1006w (v1.0) tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11

Add a DMI match for the Mediacom Flexbook Edge 11, this is the same hw
as the Trekstor Primebook C11, so we use the same settings.

Reported-by: rmbg <alexofrichardmilitiabg@hotmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models

Add min-x and min-y settings now that we've support for this and for some
models also update the width/height settings with slighly more accurate
values.

This fixes touches along the edges registering at the wrong coordinates.

While at it also set max-fingers to 10 in a couple of cases where the
touchpad can handle 10 fingers (rather then the default 5) and that was
missing.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet

Add touchscreen platform data for the Onda V80 Plus v3 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet

Add touchscreen info for the Trekstor Primetab T13B tablet.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marian Cepok <marian.cepok@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible

Add touchscreen info for the Trekstor Primebook C11 convertible.

Cc: Alicia Hormann <ahormann@gmx.net>
Suggested-by: Alicia Hormann <ahormann@gmx.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet

Add touchscreen info for the Cube KNote i1101 tablet.

Reported-and-tested-by: lkongl <lkongl@163.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the Onda V820w tablet

Add touchscreen platform data for the Onda V820w tablet.

Signed-off-by: Jun Bo Bi <jambonmcyeah@gmail.com>
[andy: fixed compilation error, massaged commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the "Connect Tablet 9" tablet

Add touchscreen info for the "Connect Tablet 9" tablet. This appears to be
a variant of the same hardware as the ITworks TW891 tablet, but it needs
different firmware for the touchscreen to fonction properly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: touchscreen_dmi: Add info for the ONDA V891W Dual OS tablet

Add touchscreen info for hardware revision "v3" of the ONDA V891W Dual
OS tablet.

Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: Rename silead_dmi to touchscreen_dmi

Not only silead touchscreens need some extra info not available in the
ACPI tables to work properly. X86 devices with a Chipone ICN8505 chip also
need some DMI based extra configuration.

There is no reason to have separate dmi config code per touchscreen
controller vendor. This commit renames silead_dmi to a more generic
touchscreen_dmi name (and Kconfig option) in preparation of adding
info for tablets with an ICN8505 based touchscreen.

Note there are no functional changes all code changes are limited to
removing references to silead where these are no longer applicable.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>