platform/mellanox: NVSW_SN2201 should depend on ACPI

The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.

Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig

The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform: mellanox: select REGMAP instead of depending on it

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

For NVSW_SN2201, select REGMAP_I2C instead of depending on it.

Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver")
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: Spelling s/platfom/platform/

Fix a misspelling of the word "platform".

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/9c8edde31e271311b7832d7677fe84aba917da8d.1653376503.git.geert@linux-m68k.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: Add support for new SN2201 system

The SN2201 is a highly integrated for one rack unit system with
L3 management switches. It has 48 x 1Gbps RJ45 + 4 x 100G QSFP28
ports in a compact 1RU form factor. The system also including a
serial port (RS-232 interface), an OOB port (1G/100M MDI interface)
and USB ports for management functions.

The processor used on SN2201 is Intel Atom®Processor C Series,
C3338R which is one of the Denverton product families.

System equipped with Nvidia®Spectrum-1 32x100GbE Ethernet switch.

Features:
- 48 ports RJ45 support 10/100/1000M speed.
- Support 4 QSFP28 ports with 10/25/40/50/100G.
- A USB port is available on SN2201. This port is used for image and File
Management purposes - backing up and restoring images and config files
- Provides flow control mechanism to ensure zero packet loss.
Uses backpressure for half-duplex operation and IEEE802.3x
for full duplex operation.
- Cut-through and Store-and-Forward free switching mechanism.
By default the mode is cut-through.
- Standard 1U chassis height.
- 19" rack mountable.
- Extensive system LED and per port LEDs.
- Redundant power supply.
- 2 x AC Power Supply (one PSU is default, second PSU is optional).

Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220430115809.54565-3-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices

Provide support for the Nvidia MSN4800-XX line cards for MSN4800
Ethernet modular switch system, providing a high performance switching
solution for Enterprise Data Centers (EDC) for building Ethernet based
clusters, High-Performance Computing (HPC) and embedded environments.
Initial version provides support for line card type MSN4800-C16. This
type of line card is equipped with:
- Lattice CPLD device, used for system and ports control.
- four Nvidia gearbox devices, used for port splitting.
- FPGA device, used for gearboxes management.
- 16x100G QSFP28 ports.
- hotpswap controllers, voltage regulators, analog-to-digital
convertors, nvram devices.
- status LED.

During initialization driver creates:
- line card's I2C tree through "i2c-mux-mlxcpd" driver.
- line card's LED objects through "leds-mlxreg" driver.
- line card's CPLD register space input / output "hwmon" attributes for
line control and monitoring through "mlxreg-io" driver. These
attributes provide CPLD and FPAG versioning, control for upgradable
components burning, NVRAM devices write protection, line card
revision, line card power consuming, line card reset cause
indication, etcetera.

Lattice CPLD device and nvram devices are feeding from auxiliary power
domain and accessible, when line card is powered off. These devices
are connected by line card driver probing routine, invoked after line
card security verification is done by hardware and event lc#n_verified
is received for line card located in slot #n.

Gearboxes, FPGA, hotpswap controllers, voltage regulators,
analog-to-digital convertors are feeding from main power domain. These
devices are connected after power good event "lc#n_powered" is received
for line card located in slot #n.

The driver 'mlxreg-lc' is driven by 'mlxreg-hotplug' driver following
relevant "hotplug" events.

Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-8-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver

The performance modules in BlueField are present in several hardware
blocks and each block provides access to these stats either through
counters that can be programmed to monitor supported events or
through memory-mapped registers that hold the relevant information.
The hardware blocks that include a performance module are:
* Tile (block containing 2 cores and a shared L2 cache)
* TRIO (PCIe root complex)
* MSS (Memory Sub-system containing the Memory Controller and L3 cache)
* GIC (Interrupt controller)
* SMMU (System Memory Management Unit)
The mlx_pmc driver provides access to all of these performance modules
through a hwmon sysfs interface.

v2 --> v3
Update copyright info.

v1 --> v2
Remove unused headers.
Add comma to arrays where last line is not a termination.
Use kstrtoint in place of sscanf.
UUID manipulation follows drivers/platform/mellanox/mlxbf-bootctl.c

Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/4e19a1e5bf4197ad27fc57981fd280eaebd23577.1602160468.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

platform/mellanox: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/mellanox: Add bootctl driver for Mellanox BlueField Soc

This commit adds the bootctl platform driver for Mellanox BlueField
Soc, which queries secure state and controls the eMMC boot partition
swapping by sending SMC calls to ATF running at EL3.

Below are the sequences of typical use case.

1. User requests boot partition swapping, which could be on-demand or
during boot-image upgrade via UEFI capsule;

2. This bootctl driver handles the request and sends SMC call
to ATF. ATF programs register BREADCRUMB0 which has value
preserved during warm reset. It also programs eMMC to swap
the boot partition;

3. After software reset (rebooting), ATF BL1 (BootRom) checks
register BREADCRUMB0 and enable watchdog if configured;

4. If booting fails, the watchdog timer will trigger rebooting.
In such case, ATF Boot ROM will switch the boot partition
back to the previous one. This is a robust feature and used
to prevent failure during boot partition upgrade.

Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc

This commit adds the TmFifo platform driver for Mellanox BlueField
Soc. TmFifo is a shared FIFO which enables external host machine
to exchange data with the SoC via USB or PCIe. The driver is based
on virtio framework and has console and network access enabled.

Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/mellanox: Introduce support for Mellanox register access driver

Introduce new Mellanox platform driver to allow access to Mellanox
programmable device register space trough sysfs interface.
The driver purpose is to provide sysfs interface for user space for the
registers essential for system control and monitoring.
The sets of registers for sysfs access are supposed to be defined per
system type bases and include the registers related to system resets
operation, system reset causes monitoring and some kinds of mux selection.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Kconfig typo fixes spotted by Randy Dunlap]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

platform/mellanox: mlxreg-hotplug: Enable building for ARM

Add ARM in addition to X86 as supported architectures in the Mellanox
Hotplug Platform driver Kconfig entry.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: rewrite commit message]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface

Restructure mlxreg header for unification of hotplug item definitions.

Unify hotplug items to allow any kind of item (power controller, fan
eeprom, psu eeprom, asic health) in common way.

Use a hardware independent regmap interface, enabling the support of
hotplug events over programmable devices attached to different bus
types, such as I2C, LPC, or SPI. Add a device node to the
mlxreg_core_data structure.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: spelling corrections, refactor device node introduction]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

platform/x86: Move Mellanox platform hotplug driver to platform/mellanox

In preparation for making the hotplug driver build for different
architectures, move mlxcpld-hotplug.c to platform/mellanox and the
header to include/linux/platform_data as mlxreg.h to reflect the new
interface changes to come.

Replace references to CPLD with REG throughout the files, consistent
with the new name.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: update copyright, rewrite commit message]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>