pinctrl: mlxbf3: Remove gpio_disable_free()

Remove support for gpio_disable_free() because it is called when the libgpiod
command "gpioset" is invoked. This gives the GPIO control back to hardware which
cancels out the effort to set the GPIO value.

Reminder of the code flow to change a GPIO value from software:
1) All GPIOs are controlled by hardware by default
2) To change the GPIO value, enable software control via a mux.
3) Once software has control over the GPIO pin, the gpio-mlxbf3 driver
will be able to change the direction and value of the GPIO.

When the user runs "gpioset gpiochip0 0=0" for example, the gpio
pin value should change from 1 to 0. In this case, mlxbf3_gpio_request_enable()
is called via gpiochip_generic_request(). The latter switches GPIO control from
hardware to software. Then the GPIO value is changed from 1 to 0. However,
gpio_disable_free() is also called which changes control back to hardware
which changes the GPIO value back to 1.

Fixes: d11f932808dc ("pinctrl: mlxbf3: Add pinctrl driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230818164314.8505-2-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: use capital "OR" for multiple licenses in SPDX

Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.

Correct also the placement of SPDX identifier in pinctrl-meson-axg
files:

WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823085546.116494-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mlxbf3: set varaiable mlxbf3_pmx_funcs storage-class-specifier to static

smatch reports
drivers/pinctrl/pinctrl-mlxbf3.c:162:20: warning: symbol
'mlxbf3_pmx_funcs' was not declared. Should it be static?

This variable is only used in one file so it should be static.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230404004501.1913144-1-trix@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mlxbf3: Add pinctrl driver support

NVIDIA BlueField-3 SoC has a few pins that can be used as GPIOs
or take the default hardware functionality. Add a driver for
the pin muxing.

Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230315215027.30685-3-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>