perf: hisilicon: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/33a8be0641b9447469fb7f6af0a10fb65efa97a3.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>

perf: hisi: Fix use-after-free when register pmu fails

When we fail to register the uncore pmu, the pmu context may not been
allocated. The error handing will call cpuhp_state_remove_instance()
to call uncore pmu offline callback, which migrate the pmu context.
Since that's liable to lead to some kind of use-after-free.

Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been failed to register.

Fixes: a0ab25cd82ee ("drivers/perf: hisi: Add support for HiSilicon PA PMU driver")
FIxes: 3bf30882c3c7 ("drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20231024113630.13472-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver

Compared to the original PA device, H60PA offers higher bandwidth.
The H60PA is a new device and we use HID to differentiate them.

The events supported by PAv3 and PAv2 are different. The PAv3 PMU
removed some events which are supported by PAv2 PMU. The older PA
PMU driver will probe v3 as v2. Therefore PA events displayed by
"perf list" cannot work properly. We add the HISI0275 HID for PAv3
PMU to distinguish different.

For each H60PA PMU, except for the overflow interrupt register, other
functions of the H60PA PMU are the same as the original PA PMU module.
It has 8-programable counters and each counter is free-running.
Interrupt is supported to handle counter (64-bits) overflow.

Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf: hisi: Remove redundant initialized of pmu->name

"pmu->name" is initialized by perf_pmu_register() function, so remove
the redundant initialized in hisi_pmu_init().

Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230403081423.62460-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()

Use "hisi_pmu" to simplify the parameter list for the hisi_pmu_init()
function.

Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

perf: hisi: Extract hisi_pmu_init

Extract the initialization code of hisi_pmu->pmu into a function

Signed-off-by: Chen Jun <chenjun102@huawei.com>
Link: https://lore.kernel.org/r/20220516131601.48383-1-chenjun102@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf: hisi: Associate PMUs in SICL with CPUs online

If a PMU is in a SICL (Super IO cluster), it is not appropriate to
associate this PMU with a CPU die. So we associate it with all CPUs
online, rather than CPUs in the nearest SCCL.

As the firmware of Hip09 platform hasn't been published yet, change
of PMU driver will not influence backwards compatibility between
driver and firmware.

Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220415102352.6665-2-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf: hisi: Fix PA PMU counter offset

The PA PMU counter offset was correct in [1] and the driver has
already been verified. We want to keep the register offset using
lower case character in later version that is consistent with
the existed driver. Since there was no functional change, we
didn't do more test. However there is typo when modified the PA
PMU counter offset by mistake, so fix this bad mistake.

[1] https://www.spinics.net/lists/arm-kernel/msg865263.html

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20210928123022.23467-1-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>

perf/hisi: Constify static attribute_group structs

These are only put in an array of pointers to const attribute_group
structs. Make them const like the other static attribute_group structs
to allow the compiler to put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605221514.73449-1-rikard.falkeborn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>

perf/hisi: Use irq_set_affinity()

These drivers use irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.

Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.

Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.

Replace the mindless abuse with irq_set_affinity().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.813375875@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf: hisi: Add support for HiSilicon PA PMU driver

On HiSilicon Hip09 platform, there is a PA (Protocol Adapter) module on
each chip SICL (Super I/O Cluster) which incorporates three Hydra interface
and facilitates the cache coherency between the dies on the chip. While PA
uncore PMU model is the same as other Hip09 PMU modules and many PMU events
are supported. Let's support the PMU driver using the HiSilicon uncore PMU
framework.

PA PMU supports the following filter functions:
* tracetag_en: allows user to count events according to tt_req or
tt_core set in L3C PMU. It's the same as other PMUs.

* srcid_cmd & srcid_msk: allows user to filter statistics that come from
specific CCL/ICL by configuration source ID.

* tgtid_cmd & tgtid_msk: it is the similar function to srcid_cmd &
srcid_msk. Both are used to check where the data comes from or go to.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Co-developed-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1615186237-22263-9-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>