#
6d0c3932 |
|
01-Mar-2024 |
Abel Vesa <abel.vesa@linaro.org> |
PCI: qcom: Add X1E80100 PCIe support Add the compatible and the driver data for X1E80100 PCIe controller. There are 5 controller instances found on this platform, out of which 2 are Gen3 with speeds of up to 8.0GT/s, while the other 3 are Gen4 with speeds of up to 16GT/s. The version of the controller is 1.38.0 for all instances, but they are compatible with 1.9.0 config. The max link width is x8 for one controller, x4 for two of others and x2 for the two left. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240301-x1e80100-pci-v4-2-7ab7e281d647@linaro.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
#
bf79e33c |
|
07-Mar-2024 |
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
PCI: qcom: Enable BDF to SID translation properly Qcom SoCs making use of ARM SMMU require BDF to SID translation table in the driver to properly map the SID for the PCIe devices based on their BDF identifier. This is currently achieved with the help of qcom_pcie_config_sid_1_9_0() function for SoCs supporting the 1_9_0 config. But With newer Qcom SoCs starting from SM8450, BDF to SID translation is set to bypass mode by default in hardware. Due to this, the translation table that is set in the qcom_pcie_config_sid_1_9_0() is essentially unused and the default SID is used for all endpoints in SoCs starting from SM8450. This is a security concern and also warrants swapping the DeviceID in DT while using the GIC ITS to handle MSIs from endpoints. The swapping is currently done like below in DT when using GIC ITS: /* * MSIs for BDF (1:0.0) only works with Device ID 0x5980. * Hence, the IDs are swapped. */ msi-map = <0x0 &gic_its 0x5981 0x1>, <0x100 &gic_its 0x5980 0x1>; Here, swapping of the DeviceIDs ensure that the endpoint with BDF (1:0.0) gets the DeviceID 0x5980 which is associated with the default SID as per the iommu mapping in DT. So MSIs were delivered with IDs swapped so far. But this also means the Root Port (0:0.0) won't receive any MSIs (for PME, AER etc...) So let's fix these issues by clearing the BDF to SID bypass mode for all SoCs making use of the 1_9_0 config. This allows the PCIe devices to use the correct SID, thus avoiding the DeviceID swapping hack in DT and also achieving the isolation between devices. Fixes: 4c9398822106 ("PCI: qcom: Add support for configuring BDF to SID mapping for SM8250") Link: https://lore.kernel.org/linux-pci/20240307-pci-bdf-sid-fix-v1-1-9423a7e2d63c@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Cc: stable@vger.kernel.org # 5.11
|
#
d1997c98 |
|
06-Mar-2024 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p Commit 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") started enabling ASPM unconditionally when the hardware claims to support it. This triggers Correctable Errors for some PCIe devices on machines like the Lenovo ThinkPad X13s when L0s is enabled, which could indicate an incomplete driver ASPM implementation or that the hardware does in fact not support L0s. This has now been confirmed by Qualcomm to be the case for sc8280xp and its derivate platforms (e.g. sa8540p and sa8295p). Specifically, the PHY configuration used on these platforms is not correctly tuned for L0s and there is currently no updated configuration available. Add a new flag to the driver configuration data and use it to disable ASPM L0s on sc8280xp, sa8540p and sa8295p for now. Note that only the 1.9.0 ops enable ASPM currently. Link: https://lore.kernel.org/r/20240306095651.4551-4-johan+linaro@kernel.org Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # 6.7
|
#
1e560864 |
|
30-Jan-2024 |
Johan Hovold <johan+linaro@kernel.org> |
PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
|
#
aea370b2 |
|
19-Dec-2023 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members Since the name of the dw_pcie_host_ops struct makes it obvious that it's for the PCIe Host, drop the host prefix from the struct members. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
|
#
780f52e3 |
|
28-Nov-2023 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Clean up ASPM comment Break up the newly added ASPM comment so that it fits within the soft 80 character limit and becomes more readable. Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
f352ce99 |
|
28-Nov-2023 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Fix potential deadlock when enabling ASPM The qcom_pcie_enable_aspm() helper is called from pci_walk_bus() during host init to enable ASPM. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). This issue was reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0-rc1 #4 Not tainted -------------------------------------------- kworker/u16:6/147 is trying to acquire lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_enable_link_state+0x74/0x1e8 but task is already holding lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Link: https://lore.kernel.org/r/20231128081512.19387-4-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
#
9f4f3dfa |
|
10-Oct-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops ASPM is supported by Qcom host controllers/bridges on most of the recent platforms and so the devices tested so far. But for enabling ASPM by default (without using Kconfig, kernel command-line or sysfs), BIOS has to enable ASPM on both host bridge and downstream devices during boot. Unfortunately, none of the BIOS available on Qcom platforms enables ASPM. Due to this, the platforms making use of Qcom SoCs draw high power during runtime. To fix this power draw issue, users have to enable ASPM using Kconfig, kernel command-line, sysfs or the BIOS has to start enabling ASPM. The latter may happen in the future, but that won't address the issue on current platforms. Also, asking users to enable a feature to get the power management right would provide an unpleasant out-of-the-box experience. So the apt solution is to enable ASPM in the controller driver itself. And this is being accomplished by calling pci_enable_link_state() in the newly introduced host_post_init() callback for all the devices connected to the bus. This function enables all supported link low power states for both host bridge and the downstream devices. Due to limited testing, ASPM is only enabled for platforms making use of ops_1_9_0 callbacks. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231010155914.9516-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
#
8da2e9af |
|
04-Oct-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed Instead of hardcoding the link speed in MBps, use existing PCIE_SPEED2MBS_ENC() macro that does the encoding of the link speed for us. Also, let's Wrap it with QCOM_PCIE_LINK_SPEED_TO_BW() macro to do the conversion to ICC speed. This eliminates the need for a switch case in qcom_pcie_icc_update() and also works for future Gen speeds without any code modifications. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/linux-pci/20231004164430.39662-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
#
6a878a54 |
|
19-Sep-2023 |
Sricharan Ramabadhran <quic_srichara@quicinc.com> |
PCI: qcom: Fix IPQ8074 enumeration PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is used by qcom_pcie_post_init_2_3_3(). This PCIe slave address space size register offset is 0x358 but was incorrectly changed to 0x16c by 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions"). This prevented access to slave address space registers like iATU, etc., so the IPQ8074 PCIe controller was not enumerated. Revert back to the correct 0x358 offset and remove the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3. Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions") Link: https://lore.kernel.org/r/20230919102948.1844909-1-quic_srichara@quicinc.com Tested-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: stable@vger.kernel.org # v6.4+
|
#
d60379d6 |
|
21-Jul-2023 |
Mrinmay Sarkar <quic_msarkar@quicinc.com> |
PCI: qcom: Add support for sa8775p SoC Add support for sa8775p SoC that uses controller version 5.90 reusing the 1.9.0 config. Link: https://lore.kernel.org/linux-pci/1689960276-29266-3-git-send-email-quic_msarkar@quicinc.com Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
#
c925cfaf |
|
14-Jul-2023 |
Rob Herring <robh@kernel.org> |
PCI: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
1fdecc5b |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Do not advertise hotplug capability for IP v2.1.0 SoCs making use of Qcom PCIe controller IP v2.1.0 do not support hotplug functionality. But the hotplug capability bit is set by default in the hardware. This causes the kernel PCI core to register hotplug service for the controller and send hotplug commands to it. But those commands will timeout generating messages as below during boot and suspend/resume. [ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) [ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago) [ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago) [ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago) This not only spams the console output but also induces a delay of a couple of seconds. To fix this issue, let's clear the HPC bit in PCI_EXP_SLTCAP register as a part of the post init sequence to not advertise the hotplug capability for the controller. Link: https://lore.kernel.org/r/20230619150408.8468-10-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
fa2dc252 |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Do not advertise hotplug capability for IP v1.0.0 SoCs making use of Qcom PCIe controller IP v1.0.0 do not support hotplug functionality. But the hotplug capability bit is set by default in the hardware. This causes the kernel PCI core to register hotplug service for the controller and send hotplug commands to it. But those commands will timeout generating messages as below during boot and suspend/resume. [ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) [ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago) [ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago) [ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago) This not only spams the console output but also induces a delay of a couple of seconds. To fix this issue, let's clear the HPC bit in PCI_EXP_SLTCAP register as a part of the post init sequence to not advertise the hotplug capability for the controller. Link: https://lore.kernel.org/r/20230619150408.8468-9-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
e35d13a5 |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0 The post init sequence of IP v2.4.0 is same as v2.3.2. So let's reuse the v2.3.2 sequence which now also disables hotplug capability of the controller as it is not at all supported on any SoCs making use of this IP. Link: https://lore.kernel.org/r/20230619150408.8468-8-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
#
25966e78 |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Do not advertise hotplug capability for IP v2.3.2 SoCs making use of Qcom PCIe controller IP v2.3.2 do not support hotplug functionality. But the hotplug capability bit is set by default in the hardware. This causes the kernel PCI core to register hotplug service for the controller and send hotplug commands to it. But those commands will timeout generating messages as below during boot and suspend/resume. [ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) [ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago) [ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago) [ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago) This not only spams the console output but also induces a delay of a couple of seconds. To fix this issue, let's clear the HPC bit in PCI_EXP_SLTCAP register as a part of the post init sequence to not advertise the hotplug capability for the controller. Link: https://lore.kernel.org/r/20230619150408.8468-7-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
11bce06b |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0 SoCs making use of Qcom PCIe controller IPs v2.3.3 and v2.9.0 do not support hotplug functionality. But the hotplug capability bit is set by default in the hardware. This causes the kernel PCI core to register hotplug service for the controller and send hotplug commands to it. But those commands will timeout generating messages as below during boot and suspend/resume. [ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) [ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago) [ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago) [ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago) This not only spams the console output but also induces a delay of a couple of seconds. To fix this issue, let's not set the HPC bit in PCI_EXP_SLTCAP register as a part of the post init sequence to not advertise the hotplug capability for the controller. Link: https://lore.kernel.org/r/20230619150408.8468-6-manivannan.sadhasivam@linaro.org Tested-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
#
a54db86d |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0 SoCs making use of Qcom PCIe controller IPs v2.7.0 and v1.9.0 do not support hotplug functionality. But the hotplug capability bit is set by default in the hardware. This causes the kernel PCI core to register hotplug service for the controller and send hotplug commands to it. But those commands will timeout generating messages as below during boot and suspend/resume. [ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) [ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago) [ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago) [ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago) This not only spams the console output but also induces a delay of a couple of seconds. To fix this issue, let's clear the HPC bit in PCI_EXP_SLTCAP register as a part of the post init sequence to not advertise the hotplug capability for the controller. Link: https://lore.kernel.org/r/20230619150408.8468-5-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
#
200b8f85 |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Disable write access to read only registers for IP v2.9.0 In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en() guard function to align with rest of the driver. Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
#
60f0072d |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use DWC helpers for modifying the read-only DBI registers DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for enabling and disabling the write access to read only DBI registers. So let's use them instead of doing it manually. Also, the existing code doesn't disable the write access when it's done. This is also fixed now. Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
#
a33d700e |
|
19-Jun-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Disable write access to read only registers for IP v2.3.3 In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org>
|
#
6276a403 |
|
20-Mar-2023 |
Abel Vesa <abel.vesa@linaro.org> |
PCI: qcom: Add SM8550 PCIe support SM8550 requires two additional clocks for proper working. Add these two clocks as optional clocks (as only required by this platform) and compatible for this platform. While at it, let's also rename the reset variable to "rst" from "pci_reset" to match the existing naming preference. Link: https://lore.kernel.org/r/20230320144658.1794991-2-abel.vesa@linaro.org Signed-off-by: Abel Vesa <abel.vesa@linaro.org> [lpieralisi@kernel.org: commit log rewording] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
|
#
7394d0a8 |
|
08-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Add support for SDX55 SoC Add support for SDX55 SoC reusing the 1.9.0 config. The PCIe controller is of version 1.10.0 but it is compatible with the 1.9.0 config. This SoC also requires "sleep" clock which is added as an optional clock in the driver, since it is not required on other SoCs. Link: https://lore.kernel.org/r/20230308082424.140224-14-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
c0e1eb44 |
|
19-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Enable async probe by default Qcom PCIe RC driver waits for the PHY link to be up during the probe; this consumes several milliseconds during boot. Enable async probe by default so that other drivers can load in parallel while this driver waits for the link to be up. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230320064644.5217-1-manivannan.sadhasivam@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
|
#
ad9b9b6e |
|
03-Apr-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Add support for system suspend and resume During the system suspend, vote for minimal interconnect bandwidth (1KiB) to keep the interconnect path active for config access and also turn OFF the resources like clock and PHY if there are no active devices connected to the controller. For the controllers with active devices, the resources are kept ON as removing the resources will trigger access violation during the late end of suspend cycle as kernel tries to access the config space of PCIe devices to mask the MSIs. Also, it is not desirable to put the link into L2/L3 state as that implies VDD supply will be removed and the devices may go into powerdown state. This will affect the lifetime of storage devices like NVMe. And finally, during resume, turn ON the resources if the controller was truly suspended (resources OFF) and update the interconnect bandwidth based on PCIe Gen speed. Suggested-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Link: https://lore.kernel.org/r/20230403154922.20704-2-manivannan.sadhasivam@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Dhruva Gole <d-gole@ti.com>
|
#
05f46464 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Expose link transition counts via debugfs Qualcomm PCIe controllers have debug registers in the MHI region that count PCIe link transitions. Expose them over debugfs to userspace to help debug the low power issues. Note that even though the registers are prefixed as PARF_, they don't live under the "parf" register region. The register naming is following the Qualcomm's internal documentation as like other registers. While at it, let's arrange the local variables in probe function to follow reverse XMAS tree order. Link: https://lore.kernel.org/r/20230316081117.14288-20-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
1f709398 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version qcom_pcie_config_sid_sm8250() function no longer applies only to SM8250. So let's rename it to reflect the actual IP version and also move its definition to keep it sorted as per IP revisions. Link: https://lore.kernel.org/r/20230316081117.14288-15-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
656a0882 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use macros for defining total no. of clocks & supplies To keep uniformity, let's use macros to define the total number of clocks and supplies in qcom_pcie_resources_{2_7_0/2_9_0} structs. Link: https://lore.kernel.org/r/20230316081117.14288-14-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
fb0eacb2 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0 All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. It should be noted that there were delays in-between the reset asserts and deasserts. But going by the config used by other revisions, those delays are not really necessary. So a single delay after all asserts and one after deasserts is used. The total number of resets supported is 12 but only ipq4019 is using all of them. Link: https://lore.kernel.org/r/20230316081117.14288-13-manivannan.sadhasivam@linaro.org Tested-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
157fecca |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3 All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. Link: https://lore.kernel.org/r/20230316081117.14288-12-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
b699ed9b |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3 All the clocks are enabled and disabled at the same time. So the bulk clock APIs can be used to handle them together. This simplifies the code a lot. Link: https://lore.kernel.org/r/20230316081117.14288-11-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
5329bcc4 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2 All the clocks are enabled and disabled at the same time. So the bulk clock APIs can be used to handle them together. This simplifies the code a lot. Link: https://lore.kernel.org/r/20230316081117.14288-10-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
5d4ffe5e |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0 All the clocks are enabled and disabled at the same time. So the bulk clock APIs can be used to handle them together. This simplifies the code a lot. Link: https://lore.kernel.org/r/20230316081117.14288-9-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
383215dd |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0 All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. While at it, let's also move the qcom_pcie_resources_2_1_0 struct below qcom_pcie_resources_1_0_0 to keep it sorted. Link: https://lore.kernel.org/r/20230316081117.14288-8-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
94ebd232 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use lower case for hex To maintain uniformity, let's use lower case for representing hexadecimal numbers. Link: https://lore.kernel.org/r/20230316081117.14288-7-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
17804668 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Add missing macros for register fields Some of the registers are changed using hardcoded bitfields without macros. This provides no information on what the register setting is about. So add the macros to those fields for making the code more understandable. Link: https://lore.kernel.org/r/20230316081117.14288-6-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
57eddec8 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use bitfield definitions for register fields To maintain uniformity throughout the driver and also to make the code easier to read, let's make use of bitfield definitions for register fields. Link: https://lore.kernel.org/r/20230316081117.14288-5-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
769e49d8 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Sort and group registers and bitfield definitions Sorting the registers and their bit definitions will make it easier to add more definitions in the future and it also helps in maintenance. While at it, let's also group the registers and bit definitions separately as done in the pcie-qcom-ep driver. Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
39171b33 |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Remove PCIE20_ prefix from register definitions The PCIE part is redundant and 20 doesn't represent anything across the SoCs supported now. So let's get rid of the prefix. This involves adding the IP version suffix to one definition of PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version. The other definition is generic for the rest of the versions. Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere, hence removed. Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
2542e16c |
|
16-Mar-2023 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Fix the incorrect register usage in v2.7.0 config Qcom PCIe IP version v2.7.0 and its derivatives don't contain the PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect register usage which is modifying a different register. Also in this IP version, this register change doesn't depend on MSI being enabled. So remove that check also. Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> # 5.6+
|
#
f3561322 |
|
13-Jan-2023 |
Robert Marko <robimarko@gmail.com> |
PCI: qcom: Add IPQ8074 Gen3 port support IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. Add compatible for Gen3 port which uses the same controller as IPQ6018. Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
997e010d |
|
17-Oct-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Fix host-init error handling Implement the new host_deinit() callback so that the PHY is powered off and regulators and clocks are disabled also on late host-init errors. Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
#
720e0d91 |
|
18-Nov-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Add SM8350 support Add support for the PCIe host on Qualcomm SM8350 platform. Link: https://lore.kernel.org/r/20221118233242.2904088-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
|
#
f90747d1 |
|
26-Sep-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Setup PHY to work in RC mode Call phy_set_mode_ext() to notify the PHY driver that the PHY is being used in the RC mode. Reviewed-by: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20220927092207.161501-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
#
c4860af8 |
|
02-Nov-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Add basic interconnect support On Qualcomm platforms like SC8280XP and SA8540P, interconnect bandwidth must be requested before enabling interconnect clocks. Add basic support for managing an optional "pcie-mem" interconnect path by setting a low constraint before enabling clocks and updating it after the link is up. Note that it is not possible for a controller driver to set anything but a maximum peak bandwidth as expected average bandwidth will vary with use case and actual use (and power policy?). This very much remains an unresolved problem with the interconnect framework. Also note that no constraint is set for the SC8280XP/SA8540P "cpu-pcie" path for now as it is not clear what an appropriate constraint would be (and the system does not crash when left unspecified). Link: https://lore.kernel.org/r/20221102090705.23634-3-johan+linaro@kernel.org Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Acked-by: Georgi Djakov <djakov@kernel.org>
|
#
fba31bea |
|
09-Nov-2022 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Fix error message for reset_control_assert() Fix the error message to mention "assert" instead of "deassert". Link: https://lore.kernel.org/r/20221109094039.25753-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org>
|
#
0e4d9a5c |
|
28-Sep-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Rename host-init error label Use a more descriptive name for the reset host-init error label for consistency. Link: https://lore.kernel.org/r/20220928155421.21660-3-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
b6230232 |
|
28-Sep-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Drop unused post_deinit callback Drop the unused and confusingly named post_deinit callback that was added for the now removed pipe clock handling. If ever needed we can add back a callback named pre_deinit (or perhaps rather pre_phy_power_off) instead. Link: https://lore.kernel.org/r/20220928155421.21660-2-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
#
d6cbfcd2 |
|
14-Jul-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Sort device-id table Sort the device-id table entries alphabetically by compatible string to make it easier to find entries and add new ones. Link: https://lore.kernel.org/r/20220714071348.6792-9-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
22311735 |
|
14-Jul-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Clean up IP configurations The various IP versions have different configurations that are encoded in separate sets of operation callbacks. Currently, there is no need for also maintaining corresponding sets of data parameters, but it is conceivable that these may again be found useful (e.g. to implement minor variations of the operation callbacks). Rename the default configuration structures after the IP version they apply to so that they can more easily be reused by different SoCs. Note that SoC specific configurations can be added later if need arises (e.g. cfg_sc8280xp). Link: https://lore.kernel.org/r/20220714071348.6792-8-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
014aa351 |
|
14-Jul-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Make all optional clocks optional The kernel is not a devicetree validator and does not need to re-encode information which is already available in the devicetree. This is specifically true for the optional PCIe clocks, some of which are really interconnect clocks. Treat also the 2.7.0 optional clocks as truly optional instead of maintaining a list of clocks per compatible (including two compatible strings for the two identical controllers on sm8450) just to validate the devicetree. Link: https://lore.kernel.org/r/20220714071348.6792-7-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
c64f56d0 |
|
14-Jul-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Add support for SA8540P The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops. Note that like for SC8280XP, the SA8540P controllers need two or three interconnect clocks to be enabled. Link: https://lore.kernel.org/r/20220714071348.6792-6-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
70574511 |
|
14-Jul-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Add support for SC8280XP The SC8280XP platform has seven PCIe controllers: two used with USB4, two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0 ops. Note that the SC8280XP controllers need two or three interconnect clocks to be enabled. Model these as optional clocks to avoid encoding devicetree data in the PCIe driver. Note that the same could be done for the SM8450 interconnect clocks and possibly also for the TBU clocks. Link: https://lore.kernel.org/r/20220714071348.6792-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
5147ba8a |
|
15-Jul-2022 |
Krishna chaitanya chundru <quic_krichai@quicinc.com> |
PCI: qcom: Allow ASPM L1 and substates for 2.7.0 Allow ASPM L1 and its substates. By default this is disabled in the qcom specific hardware. Enable it explicitly only for controllers belonging to 2_7_0. This does not affect any link capability registers; it will allow the link transitions to L1 and its substates only if they are already supported. Link: https://lore.kernel.org/r/1657886366-32685-1-git-send-email-quic_krichai@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
0cf7c2ef |
|
21-Jun-2022 |
Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com> |
PCI: qcom: Add IPQ60xx support IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that platform. The code is based on downstream[1] Codeaurora kernel v5.4 (branch win.linuxopenwrt.2.0). Split out the DBI registers access part from .init into .post_init. DBI registers are only accessible after phy_power_on(). [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com> Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
9a765805 |
|
21-Jun-2022 |
Baruch Siach <baruch.siach@siklu.com> |
PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better describe its meaning. Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
7eb5768c |
|
08-Jun-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Drop manual pipe_clk_src handling Manual reparenting of pipe_clk_src is being replaced with the parking of the clock with clk_disable()/clk_enable() in the PHY driver. Drop redundant code switching of the pipe clock between the PHY clock source and the safe bi_tcxo. Link: https://lore.kernel.org/r/20220608105238.2973600-6-dmitry.baryshkov@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
affac98a |
|
23-Jun-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Remove unnecessary pipe_clk handling PCIe PHY drivers (both QMP and PCIe2) already do clk_prepare_enable() / clk_prepare_disable() pipe_clk. Remove extra calls to enable/disable this clock from the PCIe driver, so that the PHY driver can manage the clock on its own. [bhelgaas: rebase on Robert Marko's DBI cleanup: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com] Link: https://lore.kernel.org/r/20220608105238.2973600-5-dmitry.baryshkov@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
36d9018d |
|
23-Jun-2022 |
Robert Marko <robimarko@gmail.com> |
PCI: qcom: Power on PHY before DBI register accesses IPQ8074 requires the PHY to be powered on before accessing DBI registers. It's not clear whether other variants have the same dependency, but there seems to be no reason for them to be different, so move all the DBI accesses from .init() to .post_init() so they are all after phy_power_on(). [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
a0e43bb9 |
|
23-Jun-2022 |
Robert Marko <robimarko@gmail.com> |
PCI: qcom: Power on PHY before IPQ8074 DBI register accesses Currently the Gen2 port in IPQ8074 will cause the system to hang as it accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only accesible after phy_power_on(). Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is executed after phy_power_on(). Link: https://lore.kernel.org/r/20220623155004.688090-1-robimarko@gmail.com Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: stable@vger.kernel.org # v5.11+
|
#
38f897ae |
|
08-Jul-2022 |
Christian Marangi <ansuelsmth@gmail.com> |
PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable clocks and resets. This causes the driver to never set to a ready state with the error 'Phy link never came up'. This is caused by the PHY clock getting enabled before setting the required bits in the PARF regs. A workaround for this was set but with this new discovery we can drop the workaround and use a proper solution to the problem by just enabling the clock only AFTER the PARF_PHY_CTRL bit is set. This correctly sets up the PCIe link and makes it usable even when a bootloader leaves the PCIe link in an undefined state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
60b3c27f |
|
24-Jun-2022 |
Serge Semin <Sergey.Semin@baikalelectronics.ru> |
PCI: dwc: Rename struct pcie_port to dw_pcie_rp All of the DW PCIe core driver entities except the pcie_port struct have names with the "dw_" prefix to distinguish local and common PCIe name spaces, and endpoint-related entities have an "_ep" suffix. Rename struct pcie_port to dw_pcie_rp to make it more consistent with other names. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-16-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
#
83013631 |
|
01-Apr-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Fix unbalanced PHY init on probe errors Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5
|
#
87d83b96 |
|
01-Apr-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Fix runtime PM imbalance on probe errors Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral. Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
|
#
fdf6a2f5 |
|
01-Apr-2022 |
Johan Hovold <johan+linaro@kernel.org> |
PCI: qcom: Fix pipe clock imbalance Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller"), which enables the pipe clock both in init() and in post_init() but only disables in post_deinit(). Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable. Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # 5.6
|
#
a935601e |
|
26-Mar-2022 |
Bhupesh Sharma <bhupesh.sharma@linaro.org> |
PCI: qcom: Add SM8150 SoC support The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on SM8250. Add SM8150 support, reusing the members of ops_1_9_0. Link: https://lore.kernel.org/r/20220326060810.1797516-3-bhupesh.sharma@linaro.org Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Vinod Koul <vkoul@kernel.org>
|
#
134b5ce3 |
|
30-Mar-2022 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X The Qualcomm SC8180X platform was piggy-backing on the SM8250 qcom_pcie_cfg, but SC8180X doesn't have the ddrss_sf_tbu clock, so it now fails to probe due to the missing clock. Give SC8180X its own qcom_pcie_cfg, without the ddrss_sf_tbu flag set. Fixes: 0614f98bbb9f ("PCI: qcom: Add ddrss_sf_tbu flag") Link: https://lore.kernel.org/r/20220331013415.592748-1-bjorn.andersson@linaro.org Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
1c5aa037 |
|
23-Feb-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Add SM8450 PCIe support On SM8450 platform PCIe hosts do not use all the clocks (and add several additional clocks), so expand the driver to handle these requirements. PCIe0 and PCIe1 hosts use different sets of clocks, so separate entries are required. Link: https://lore.kernel.org/r/20220223101435.447839-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
0614f98b |
|
23-Feb-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Add ddrss_sf_tbu flag Qualcomm PCIe driver uses compatible string to check if the ddrss_sf_tbu clock should be used. Since sc7280 support has added flags, switch to the new mechanism to check if this clock should be used. Link: https://lore.kernel.org/r/20220223101435.447839-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
f94c35e0 |
|
23-Feb-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg In preparation to adding more flags to configuration data, use pointer to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than duplicating all its fields. This would save us from the boilerplate code that just copies flag values from one struct to another one. Link: https://lore.kernel.org/r/20220223101435.447839-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
904b10fb |
|
13-Feb-2022 |
Pali Rohár <pali@kernel.org> |
PCI: Add defines for normal and subtractive PCI bridges Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
3f13d611 |
|
30-Nov-2021 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Use __be16 type to store return value from cpu_to_be16() cpu_to_be16() returns __be16 value but the driver uses u16 and that's incorrect. Fix it by using __be16 as the data type of bdf_be variable. The issue was spotted by the below sparse warning: sparse warnings: (new ones prefixed by >>) >> drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned short [usertype] bdf_be @@ got restricted __be16 [usertype] @@ drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: expected unsigned short [usertype] bdf_be drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: got restricted __be16 [usertype] Link: https://lore.kernel.org/r/20211130080924.266116-1-manivannan.sadhasivam@linaro.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
#
4e0e9053 |
|
06-Nov-2021 |
Christophe JAILLET <christophe.jaillet@wanadoo.fr> |
PCI: qcom: Fix an error handling path in 'qcom_pcie_probe()' If 'of_device_get_match_data()' fails, previous 'pm_runtime_get_sync()/ pm_runtime_enable()' should be undone. To fix it, the easiest is to move this block of code before the memory allocations and the pm_runtime_xxx calls. Link: https://lore.kernel.org/r/4d03c636193f64907c8dacb17fa71ed05fd5f60c.1636220582.git.christophe.jaillet@wanadoo.fr Fixes: b89ff410253d ("PCI: qcom: Replace ops with struct pcie_cfg in pcie match data") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
|
#
45a3ec89 |
|
23-Aug-2021 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Add sc8180x compatible The SC8180x platform comes with 4 PCIe controllers, typically used for things such as NVME storage or connecting a SDX55 5G modem. Add a compatible for this, that just reuses the 1.9.0 ops. Link: https://lore.kernel.org/linux-arm-msm/20210725040038.3966348-4-bjorn.andersson@linaro.org/ Link: https://lore.kernel.org/r/20210823154958.305677-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated match data structure] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
|
#
aa9c0df9 |
|
07-Oct-2021 |
Prasad Malisetty <pmaliset@codeaurora.org> |
PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src must be the TCXO while gdsc is enabled. After PHY init successful clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. Link: https://lore.kernel.org/r/1633628923-25047-6-git-send-email-pmaliset@codeaurora.org Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
|
#
b89ff410 |
|
07-Oct-2021 |
Prasad Malisetty <pmaliset@codeaurora.org> |
PCI: qcom: Replace ops with struct pcie_cfg in pcie match data Add struct qcom_pcie_cfg as match data for all platforms. Assign appropriate platform ops into struct qcom_pcie_cfg and read using of_device_get_match_data() in qcom_pcie_probe(). Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
|
#
2cfef197 |
|
19-Oct-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices. It was tested that while apq doesn't require the padding, ipq SoC must use it or the kernel hangs on boot. Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com Fixes: de3c4bf64897 ("PCI: qcom: Add support for tx term offset for rev 2.1.0") Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.19+
|
#
7081556f |
|
16-Jan-2021 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
PCI: qcom: Add support for ddrss_sf_tbu clock On SM8250 additional clock is required for PCIe devices to access NOC. Update PCIe controller driver to control this clock. Link: https://lore.kernel.org/r/20210117013114.441973-3-dmitry.baryshkov@linaro.org Fixes: e1dd639e374a ("PCI: qcom: Add SM8250 SoC support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
4c939882 |
|
08-Dec-2020 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Add support for configuring BDF to SID mapping for SM8250 For SM8250, we need to write the BDF to SID mapping in PCIe controller register space for proper working. This is accomplished by extracting the BDF and SID values from "iommu-map" property in DT and writing those in the register address calculated from the hash value of BDF. In case of collisions, the index of the next entry will also be written. For the sake of it, let's introduce a "config_sid" callback and do it conditionally for SM8250. Link: https://lore.kernel.org/r/20201208121402.178011-4-mani@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
#
e1dd639e |
|
08-Dec-2020 |
Manivannan Sadhasivam <mani@kernel.org> |
PCI: qcom: Add SM8250 SoC support The PCIe IP (rev 1.9.0) on SM8250 SoC is similar to the one used on SDM845. Hence the support is added reusing the members of ops_2_7_0. The key difference between ops_2_7_0 and ops_1_9_0 is the config_sid callback, which will be added in successive commit. Link: https://lore.kernel.org/r/20201208121402.178011-3-mani@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
#
b9ac0f9d |
|
05-Nov-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Move dw_pcie_setup_rc() to DWC common code All RC complex drivers must call dw_pcie_setup_rc(). The ordering of the call shouldn't be too important other than being after any RC resets. There's a few calls of dw_pcie_setup_rc() left as drivers implementing suspend/resume need it. Link: https://lore.kernel.org/r/20201105211159.1814485-13-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org
|
#
59fbab1a |
|
05-Nov-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Move dw_pcie_msi_init() into core The host drivers which call dw_pcie_msi_init() are all the ones using the built-in MSI controller, so let's move it into the common DWC code. Link: https://lore.kernel.org/r/20201105211159.1814485-12-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
|
#
886a9c13 |
|
05-Nov-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
|
#
5bcb1757 |
|
05-Nov-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Move MSI interrupt setup into DWC common code Platforms using the built-in DWC MSI controller all have a dedicated interrupt with "msi" name or at index 0, so let's move setting up the interrupt to the common DWC code. spear13xx and dra7xx are the 2 oddballs with muxed interrupts, so we need to prevent configuring the MSI interrupt by setting msi_irq to negative. Link: https://lore.kernel.org/r/20201105211159.1814485-9-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
|
#
a0fd361d |
|
05-Nov-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code Most DWC drivers use the common register resource names "dbi", "dbi2", and "addr_space", so let's move their setup into the DWC common code. This means 'dbi_base' in particular is setup later, but it looks like no drivers touch DBI registers before dw_pcie_host_init or dw_pcie_ep_init. Link: https://lore.kernel.org/r/20201105211159.1814485-4-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Jonathan Chocron <jonnyc@amazon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
|
#
39bc5006 |
|
20-Aug-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Centralize link gen setting keystone would force gen2 if no DT property. Now it relies on the PCI_EXP_LNKCAP value. Link: https://lore.kernel.org/r/20200821035420.380495-35-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
|
#
7b87ddc0 |
|
20-Aug-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc/qcom: Use common PCI register definitions The QCom driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-30-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-arm-msm@vger.kernel.org
|
#
cf627713 |
|
20-Aug-2020 |
Rob Herring <robh@kernel.org> |
PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init() instead of duplicating it in all the drivers. Link: https://lore.kernel.org/r/20200821035420.380495-22-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org
|
#
d3d4d028 |
|
01-Sep-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0 Qsdk U-Boot can incorrectly leave the PCIe interface in an undefined state if bootm command is used instead of bootipq. This is caused by the not deinit of PCIe when bootm is called. Reset the PCIe before init anyway to fix this U-Boot bug. Link: https://lore.kernel.org/r/20200901124955.137-1-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # v4.19+
|
#
936fa5cd |
|
08-Jul-2020 |
Dejin Zheng <zhengdejin5@gmail.com> |
PCI: dwc: Convert to devm_platform_ioremap_resource_byname() Use devm_platform_ioremap_resource_byname() to simplify the code since it contains platform_get_resource_byname() and devm_ioremap_resource() respectively. Link: https://lore.kernel.org/r/20200708164013.5076-1-zhengdejin5@gmail.com Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Rob Herring <robh@kernel.org>
|
#
824001cb |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Replace define with standard value Lots of define are actually already defined in pci_regs.h, directly use the standard defines. Link: https://lore.kernel.org/r/20200615210608.21469-13-ansuelsmth@gmail.com Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
51ed2c2b |
|
15-Jun-2020 |
Sham Muthayyan <smuthayy@codeaurora.org> |
PCI: qcom: Support pci speed set for ipq806x Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to some hardware limitations. Add support for speed setting defined by the max-link-speed binding. If not defined the max speed is set to GEN2 by default. Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.com Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
8df093fe |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Add ipq8064 rev2 variant Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit different offset based on the revision. Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.com Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
de3c4bf6 |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Add support for tx term offset for rev 2.1.0 Add tx term offset support to pcie qcom driver need in some revision of the ipq806x SoC. Ipq8064 needs tx term offset set to 7. Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+
|
#
5149901e |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Define some PARF params needed for ipq8064 SoC Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization needed on some ipq8064 based device (Netgear R7800 for example). Without this the system locks on kernel load. Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+
|
#
6a114526 |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Use bulk clk api and assert on error Rework 2.1.0 revision to use bulk clk api and fix missing assert on reset_control_deassert error. Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.com Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
ee367e2c |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Add missing reset for ipq806x Add missing ext reset used by ipq8064 SoC in PCIe qcom driver. Link: https://lore.kernel.org/r/20200615210608.21469-5-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+
|
#
dd58318c |
|
15-Jun-2020 |
Abhishek Sahu <absahu@codeaurora.org> |
PCI: qcom: Change duplicate PCI reset to phy reset The deinit issues reset_control_assert for PCI twice and does not contain phy reset. Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.com Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
8b6f0330 |
|
15-Jun-2020 |
Ansuel Smith <ansuelsmth@gmail.com> |
PCI: qcom: Add missing ipq806x clocks in PCIe driver Aux and Ref clk are missing in PCIe qcom driver. Add support for this optional clks for ipq8064/apq8064 SoC. Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
cb52a402 |
|
06-Jul-2020 |
Dinghao Liu <dinghao.liu@zju.edu.cn> |
PCI: qcom: Fix runtime PM imbalance on error pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Link: https://lore.kernel.org/r/20200707055000.9453-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
#
604f3956 |
|
26-Dec-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges. Fixes: 322f03436692 ("PCI: qcom: Use default config space read function") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v5.2+
|
#
ed8cc3b1 |
|
06-Nov-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Add support for SDM845 PCIe controller The SDM845 has one Gen2 and one Gen3 controller, add support for these. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
64adde31 |
|
29-May-2019 |
Niklas Cassel <niklas.cassel@linaro.org> |
PCI: qcom: Ensure that PERST is asserted for at least 100 ms Currently, there is only a 1 ms sleep after asserting PERST. Reading the datasheets for different endpoints, some require PERST to be asserted for 10 ms in order for the endpoint to perform a reset, others require it to be asserted for 50 ms. Several SoCs using this driver uses PCIe Mini Card, where we don't know what endpoint will be plugged in. The PCI Express Card Electromechanical Specification r2.0, section 2.2, "PERST# Signal" specifies: "On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from the power rails achieving specified operating limits." Add a sleep of 100 ms before deasserting PERST, in order to ensure that we are compliant with the spec. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5+
|
#
67021ae0 |
|
28-May-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Add QCS404 PCIe controller support The QCS404 platform contains a PCIe version 2.4.0 controller and a Qualcomm PCIe2 PHY. The driver already supports version 2.4.0, for the IPQ4019, but this support touches clocks and resets related to the PHY as well and there's no upstream driver for the PHY. On QCS404 we must initialize the PHY, so a separate PHY driver is implemented to take care of this and the controller driver is updated to not require the PHY related resources. This is done by relying on the fact that operations in both the clock and reset framework are NOPs when passed NULL, so we can isolate this change to only the qcom_pcie_get_resources_2_4_0() function. For QCS404 we also need to enable the AHB (iface) clock, in order to access the register space of the controller, but as this is not part of the IPQ4019 DT binding this is only added for new users of the 2.4.0 controller. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
5aa18097 |
|
28-May-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Use clk bulk API for 2.4.0 controllers Before introducing the QCS404 platform, which uses the same PCIe controller as IPQ4019, migrate this to use the bulk clock API, in order to make the error paths slighly cleaner. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
322f0343 |
|
25-Mar-2019 |
Marc Gonzalez <marc.w.gonzalez@free.fr> |
PCI: qcom: Use default config space read function Move the device class fudge to a proper fixup function, and remove qcom_pcie_rd_own_conf() which has become useless. dw_pcie_setup_rc() already did the right thing, but it's broken on older qcom chips, such as 8064. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
02b485e3 |
|
25-Jan-2019 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Don't deassert reset GPIO during probe Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org
|
#
6e5da6f7 |
|
31-Aug-2018 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
PCI: qcom: Fix error handling in runtime PM support The driver does not cope with the fact that probe can fail in a number of cases after enabling runtime PM on the device; this results in warnings about "Unbalanced pm_runtime_enable". Furthermore if probe fails after invoking qcom_pcie_host_init() the power-domain will be left referenced. As it is not possible for the error handling in qcom_pcie_host_init() to handle errors happening after returning from that function the pm_runtime_get_sync() is moved to qcom_pcie_probe() as well. Fixes: 854b69efbdd2 ("PCI: qcom: add runtime pm support to pcie_port") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
739cd359 |
|
30-Jun-2018 |
Shawn Guo <shawn.guo@linaro.org> |
PCI: qcom: Drop unnecessary root_bus_nr setting Function dw_pcie_host_init() already initializes the root_bus_nr field of 'struct pcie_port', so the -1 assignment prior to calling dw_pcie_host_init() in platform specific driver is not really needed. Drop it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
#
6e0832fa |
|
30-May-2018 |
Shawn Lin <shawn.lin@rock-chips.com> |
PCI: Collect all native drivers under drivers/pci/controller/ Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|