#
0a44dfc0 |
|
29-Jan-2024 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: simplify non-chanctx drivers There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
a790cc3a |
|
09-Oct-2022 |
Alexander Wetzel <alexander@wetzel-home.de> |
wifi: mac80211: add wake_tx_queue callback to drivers mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
7b7090b4 |
|
24-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: split bss_info_changed method Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
2ce113de |
|
02-Oct-2019 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: simplify TX aggregation start There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
f0248ec4 |
|
12-Jul-2019 |
Stanislaw Gruszka <sgruszka@redhat.com> |
mt7601u: use params->ssn value directly There is no point to use pointer to params->ssn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
1802d0be |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
03d677c5 |
|
08-Jul-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt7601u: use sw encryption for hw unsupported ciphers Fall back to software encryption for hw unsupported ciphers in order to enable 802.11w Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
2019c39a |
|
16-Apr-2018 |
Stanislaw Gruszka <sgruszka@redhat.com> |
mt7601u: run calibration works after finishing scanning When finishing scanning we switch to operational channel sill with SCANNING flag. This mean that we never perform calibration works after scanning. To fix the problem queue calibration works on .sw_scan_complete() routine. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
032a552e |
|
08-Feb-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt7601u: set device mac address in mt7601u_add_interface() If mac80211 adds a vif with a different mac address respect to the eeprom one, the device will not be able to connect to the ap since the hw address has not been updated. Fix the issue updating hw mac address in mt7601u_add_interface routine BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1516935 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
adcc710d |
|
30-Aug-2016 |
Jakub Kicinski <kuba@kernel.org> |
mt7601u: remove unnecessary include There is no need to include linux/version.h in a in-tree driver. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
50ea05ef |
|
30-Dec-2015 |
Sara Sharon <sarasharon1@gmail.com> |
mac80211: pass block ack session timeout to to driver Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
e3abc8ff |
|
16-Aug-2015 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
mac80211: allow to transmit A-MSDU within A-MPDU Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
2dea58f6 |
|
02-Jun-2015 |
Jakub Kicinski <kubakici@wp.pl> |
mt7601u: set promiscous mode based on FIF_OTHER_BSS Most drivers use FIF_OTHER_BSS to set promiscous mode. Let us follow their lead even though it doesn't match exactly the HW filter flags. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
c869f77d |
|
26-May-2015 |
Jakub Kicinski <kubakici@wp.pl> |
add mt7601u driver Add support for the simplest of MediaTek Wi-Fi devices - MT7601U. It is a single stream bgn chip with no bells or whistles. This driver is partially based on Felix's mt76 but IMHO it doesn't make sense to merge the two right now because MT7601U is a design somewhere between old Ralink devices and new Mediatek chips. There wouldn't be all that much code sharing with the devices mt76 supports. Situation may obviously change when someone decides to extend m76 with support for the more recent USB dongles. The driver supports only station mode. I'm hoping to add AP support when time allows. This driver sat on GitHub for quite a while and got some testing there: http://github.com/kuba-moo/mt7601u Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|