wifi: mt76: permit to load precal from NVMEM cell for mt7915

Permit to load precal from NVMEM cell for mt7915. The NVMEM cell must be
named "precal" to be correctly loaded.

NVMEM cell must already account the correct offset and be placed after
the EEPROM as the function expect the data right from the start.

Tested-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: limit support of precal loading for mt7915 to MTD only

Limit support for precal loading for mt7915 only to MTD. Passing data
from DT doesn't support offset and NVMEM require a different cell name
and doesn't support offset hence only MTD way is actually supported.

Rename mt76_get_of_eeprom_from_mtd to mt76_get_of_data_from_mtd as it is
now used for a more generic purpose and export it.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: add support for MT7981

Add support for the MediaTek MT7981 SoC which is similar to the MT7986
but with a newer IP cores and only 2x ARM Cortex-A53 instead of 4x.
Unlike MT7986 the MT7981 can only connect a single wireless frontend,
usually MT7976 is used for DBDC.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom()

When flash mode is enabled, and the eeprom data in the flash is not for
the current chipset, it'll still be checked valid, and the default
eeprom bin won't be loaded.
(e.g., mt7915 NIC inserted with mt7916 eeprom data in the flash.)

Fix this kind of case by adding chip id into consideration in
mt7915_check_eeprom().

Reported-by: Cheng-Ji Li <cheng-ji.li@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: check return value before accessing free_block_num

Check return value of mt7915_mcu_get_eeprom_free_block() first before
accessing free_block_num.

Fixes: bbc1d4154ec1 ("mt76: mt7915: add default calibrated data support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: rely on band_idx of mt76_phy

The commit dc44c45c8cd0 added band_idx into mt76_phy, so switching to
rely on that.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDC

mt7915 does not have a per-band number of chains unlike the other chips,
it only has a total number of chains. Yet the current code would
consider the total number as a per-band number.

For example, it would report that a 2x2 + 2x2 DBDC card have 4 chains on
each band and set chainmask to 0b1111 for the first interface and
0b11110000 for the second.

Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

wifi: mt76: mt7915: rework eeprom tx paths and streams init

Rework tx paths and streams init part to improve readability, and make
sure that the available tx streams should be smaller than or equal to
the available tx paths.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix DBDC default band selection on MT7915D

This code was accidentally dropped while adding 6 GHz support

Fixes: b4d093e321bd ("mt76: mt7915: add 6 GHz support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add txpower init for 6GHz

Add support to init txpower values of 6GHz band.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix eeprom fields of txpower init values

A-die 7976 has different offset and uses different channel group
definition on txpower init values.

Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add 6 GHz support

Basic 6 GHz support is added to mt76.
Modification includes:
1. Add 6 GHz E2P definition
2. Register 6 GHz HE cap
3. Refactor existing code of adding a STA

This adds support for Wi-Fi 6E on MT7986/MT7916.
Detailed link:
https://www.mediatek.com/products/mediatek-filogic-830
Detailed link:
https://www.mediatek.com/products/products/broadband-wifi/mediatek-filogic-630

Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <Shayne.Chen@mediatek.com>
Signed-off-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com>
Signed-off-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce band_idx in mt7915_phy

The wfsys of MT7986 has only single adie chip for non-dbdc devices,
and it binds to band1 by default. Hence this patch adds band_idx to
explicitly configure phy accordingly.

Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add support for MT7986

This adds MT7986 SoC integrated multi-band 4x4 WiFi 6/6E.

Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add mt7916 calibrated data support

Adjust proper eeprom size and add default calibrated data support
for mt7916.

Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: rework eeprom.c to adapt mt7916 changes

This is an intermediate patch to add mt7916 support.

Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add default calibrated data support

Load the default eeprom data when the content of flash/efuse is invalid.
This could help to eliminate some issues due to incorrect or
insufficient rf values.

Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: read all eeprom fields from fw in efuse mode

If efuse mode is used, read all values from fw during eeprom init,
which makes it more convinient to check if rf values in efuse are
properly burned.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: do not read rf value from efuse in flash mode

Do not read rf value from efuse when driver is configured to
use flash mode.

Tested-by: Bruce Chuang <bruce-ss.chuang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: rework the flow of txpower setting

Clean up the flow of per-rate txpower limit setting to get rid of
duplicate work since it has already been handled by firmware, and set
proper max_power based on different channels and regdomains.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add support for applying pre-calibration data

When the EEPROM data is read from flash, it can contain pre-calibration
data, which can save calibration time.

Note that group_cal can save 30% bootup calibration time, and dpd_cal can
save 75% channel switching time.

Tested-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix txpower init for TSSI off chips

Fix incorrect txpower init value for TSSI off chips which causes
too small txpower.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix eeprom DBDC band selection

When the EEPROM band fields contain default values, assign 2.4 GHz to the
first band and 5 GHz to the second.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix eeprom parsing for DBDC

Annotate WIFI_CONF eeprom mask values with the byte number
Fix parsing per-band number of chains

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move chainmask in mt76_phy

Move chainmask from driver phy to mt76_phy since it is used by all
drivers. This is a preliminary patch to create a common mcu library used
by mt7615 and mt7921 drivers

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add support for flash mode

Add support for getting rf values from flash.
This is used for some test purposes and products.
If the mtd partition is configured in dts, driver will read from flash
to init eeprom command; if not, still init it with efuse's values.

An example:
&slot0 {
mt7915@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};

Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce dbdc support

Introduce mt7915 dbdc support. If dbdc is available, mt7915 primary phy
will work on 2.4GHz band, while secondary one on 5GHz band.

Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move hw mac_addr in mt76_phy

This is a preliminary patch to properly support mt7915 dbdc

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move band capabilities in mt76_phy

This is a preliminary patch to move properly support mt7915 dbdc

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: rely on eeprom definitions

In order to make the code more readable, rely on mt7915_eeprom_field
definitions for eeprom parsing

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: make mt7915_eeprom_read static

Make mt7915_eeprom_read routine static since it is used only in eeprom.c

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: implement HE per-rate tx power support

Use firmware support for applying per-rate limit and power offsets.
This can support all HE RU types.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Acked-by: Yiwei Chung <yiwei.chung@mediatek.com>
Acked-by: YF Luo <yf.luo@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add mac80211 driver for MT7915 PCIe-based chipsets

Add support for the MediaTek latest generation IEEE 802.11ax 4x4
device MT7915E, which supports concurrent dual-band operation at
both 5GHz and 2.4GHz.

Note that this patch just add basic part and will add more HE
capabilities support in the further patches.

The driver supports AP, Station, Mesh and monitor mode.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Suggested-by: Shihwei Lin <shihwei.lin@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Acked-by: Yiwei Chung <yiwei.chung@mediatek.com>
Acked-by: YF Luo <yf.luo@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>