wifi: mac80211: simplify non-chanctx drivers

There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.

Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mt76: mt76x02: introduce SAR support

Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mac_work in mt76_core module

Move mac_work delayed_work and mac_work_count in mt76_phy since it is
used by all drivers. This is a preliminary patch to create a common mcu
library used by mt7615 and mt7921 drivers

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: avoid extra RCU synchronization on station removal

Use sta_pre_rcu_remove callback to clear wcid pointer earlier

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move txpower_conf back to driver specific structs

Nothing in the core uses it

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move state from struct mt76_dev to mt76_phy

Allows keeping per-wiphy state separate

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move channel state to struct mt76_phy

Add support for an extra wiphy in mt76_set_channel and mt76_get_survey
This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add support for an extra wiphy in the main tx path

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76_get_antenna in mt76_core module

Move mt76_get_antenna in mac80211.c in order to be reused by all
drivers. Initialize .get_antenna function pointer for mt76x0, mt7603,
mt7615 and mt76x2u drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: unify channel survey update code

Host time is used to calculate the channel active time on mt7603 and mt7615.
Use the same on mt76x02 and move the lock to core code to get rid of some
duplicated code.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module

Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the
code is shared between both drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete

Introduce a default implementation for mt76_sw_scan and
mt76_sw_scan_complete in mt76 module and remove duplicated code
since most of the drivers share the same implementation

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02u: enable survey support

Introduce channel survey support for mt76x2u and mt76x0u drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros

Improve code readability introducing mt76x02_pre_tbtt_enable and
mt76x02_beacon_enable utility macros

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: switch to SPDX tag instead of verbose boilerplate text

No functional change intended.

Add SPDX identifiers to all remaining files in /mt76.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x2: move mutex_lock inside mt76x2_set_channel

This is a preliminary patch to run mt76x02_edcca_init atomically

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel

Remove mt76x02_edcca_init in mt76x2u_set_channel since it is already
run by mt76x2u_phy_channel_calibrate performing channel calibration

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: remove enable from mt76x02_edcca_init signature

Remove enable parameter from mt76x02_edcca_init routine signature since
it is always true

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: remove bogus mutex usage

mac80211 .start(), .stop() callbacks are never called concurrently with
other callbacks. The only concurencly is with mt76 works which we cancel
on stop() and schedule on start().

This fixes possible deadlock on cancel_delayed_work_sync(&dev->mac_work)
as mac_work also take mutex.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76usb: fix tx/rx stop

Disabling tasklets on stopping rx/tx is wrong. If blocked tasklet
is scheduled and we remove device we will get 100% cpu usage:

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9 root 20 0 0 0 0 R 93.8 0.0 1:47.19 ksoftirqd/0

by infinite loop in tasklet_action_common() and eventuall crash on next
mt76usb module load:

[ 2068.591964] RIP: 0010:tasklet_action_common.isra.17+0x66/0x100
[ 2068.591966] Code: 41 89 f5 eb 25 f0 48 0f ba 33 00 0f 83 b1 00 00 00 48 8b 7a 20 48 8b 42 18 e8 56 a3 b5 00 f0 80 23 fd 48 89 ea 48 85 ed 74 53 <48> 8b 2a 48 8d 5a 08 f0 48 0f ba 6a 08 01 72 0b 8b 42 10 85 c0 74
[ 2068.591968] RSP: 0018:ffff98758c34be58 EFLAGS: 00010206
[ 2068.591969] RAX: ffff98758e6966d0 RBX: ffff98756e69aef8 RCX: 0000000000000006
[ 2068.591970] RDX: 01060a053d060305 RSI: 0000000000000006 RDI: ffff98758e6966d0
[ 2068.591971] RBP: 01060a053d060305 R08: 0000000000000000 R09: 00000000000203c0
[ 2068.591971] R10: 000003ff65b34f08 R11: 0000000000000001 R12: ffff98758e6966d0
[ 2068.591972] R13: 0000000000000006 R14: 0000000000000040 R15: 0000000000000006
[ 2068.591974] FS: 0000000000000000(0000) GS:ffff98758e680000(0000) knlGS:0000000000000000
[ 2068.591975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2068.591975] CR2: 00002c5f73a6cc20 CR3: 00000002f920a001 CR4: 00000000003606e0
[ 2068.591977] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2068.591978] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2068.591978] Call Trace:
[ 2068.591985] __do_softirq+0xe3/0x30a
[ 2068.591989] ? sort_range+0x20/0x20
[ 2068.591990] run_ksoftirqd+0x26/0x40
[ 2068.591992] smpboot_thread_fn+0xc5/0x160
[ 2068.591995] kthread+0x112/0x130
[ 2068.591997] ? kthread_create_on_node+0x40/0x40
[ 2068.591998] ret_from_fork+0x35/0x40
[ 2068.591999] Modules linked in: ccm arc4 fuse rfcomm cmac bnep sunrpc snd_hda_codec_hdmi snd_soc_skl snd_soc_core snd_soc_acpi_intel_match snd_hda_codec_realtek snd_soc_acpi snd_hda_codec_generic snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core iTCO_wdt snd_hda_intel intel_rapl iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp btusb mei_wdt coretemp btrtl snd_hda_codec btbcm btintel intel_cstate snd_hwdep intel_uncore uvcvideo snd_hda_core videobuf2_vmalloc videobuf2_memops intel_rapl_perf wmi_bmof videobuf2_v4l2 intel_wmi_thunderbolt snd_seq bluetooth joydev videobuf2_common snd_seq_device snd_pcm videodev media i2c_i801 snd_timer idma64 ecdh_generic intel_lpss_pci intel_lpss mei_me mei ucsi_acpi typec_ucsi processor_thermal_device intel_soc_dts_iosf intel_pch_thermal typec thinkpad_acpi wmi snd soundcore rfkill int3403_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad pcc_cpufreq uas usb_storage crc32c_intel i915 i2c_algo_bit nvme serio_raw
[ 2068.592033] drm_kms_helper e1000e nvme_core drm video ipv6 [last unloaded: cfg80211]

Fortunate thing is that this not happen frequently, as scheduling
tasklet on blocked state is very exceptional, though might happen.

Due to different RX/TX tasklet processing fix is different for those.

For RX we have to assure rx_tasklet do fail to resubmit buffers
by poisoning urb's and kill the tasklet.

For TX we need to handle all stop cases properly (suspend, module
unload, device removal).

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mac_work in mt76_dev

Move mac_work delayed work in mt76_dev data structure since
it is used by all drivers and it will be reused adding mac work to
mt7615

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: unify set_tim

All mt76 drivers (now also USB drivers) require empty .set_tim
callback. Add it to common mt76 module and use on all drivers.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x02u: add mt76_release_buffered_frames

Create software MT_TXQ_PSD queue for USB and map it to MT_TXQ_VO
since we do not have USB endpoint for PSD. This should make
mt76_release_buffered_frames() work by sending released frames
via MT_TXQ_VO.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x02: introduce beacon_ops

Enabling/disableing TBTT and beacon will be diffrent for USB. Introduce
beacon_ops to encapsulate that and implement it for MMIO. USB
implementation is noop for now.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x2: unify mt76x2[u]_mac_resume

They are now the same and short enough to be turned into an inline function

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: fix ED/CCA enabling/disabling

ED/CCA needs to be disable before stopping the MAC to avoid hangs from tx
being blocked. It must only be enabled again after the MAC has been started
again.
In many places this wasn't done properly, so fix this by always clearing
the relevant ED/CCA bits in mt76x2_mac_stop and set it up again after
channel change or calibration is done

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: run MAC work every 100ms

ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid
triggering too late and keeping tx blocking on for too long

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x02: use commmon add interface for mt76x2u

Since we now support mt76x2u feature to allow set mac address
when creating interface in common code we can use it for
mt76x2u.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x02_get_txpower to mt76 core

It will be reused by mt7603 later

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: replace sta_add/remove ops with common sta_state function

Allows adding unassociated stations from mac80211

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

mt76x2u: main: use mt76x02_bss_info_changed utility routine

Initialize bss_info_changed mac80211 callback to
mt76x02_bss_info_changed utility routine and remove duplicated code.
Use 8 as WCID index for sta interface

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x2u: phy: run phy_channel_calibrate after channel switch

Perform channel calibration after each channel switch and not only after
connection establishment since NetworkManager perform multiple frequency
scanning if RSSI in lower a given threshold

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x02_get_txpower in mt76x02_util.c

Move mt76x02_get_txpower utility routine in mt76x02-lib module
in order to be reused by mt76x0 and mt76x2u drivers

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module

Move mt76x02_sw_scan and mt76x02_sw_scan_complete utility routines
in mt76x02_util.c in order to be reused by mt76x0 and mt76x2u drivers
and remove duplicated code

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x2u: introduce mac workqueue support

Add mac workqueue support to mt76x2u driver in order
to compute device statistics and add mac stuck routine

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

Use mt76x02_dev data structure as reference in mt76x02_mac.c
instead of mt76_dev

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c

Use mt76x02_dev data structure as reference in mt76x02_util.c
instead of mt76_dev

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: rename mt76x02_util.h in mt76x02.h

Rename mt76x02_util.h header file in mt76x02.h since now contains
all mt76x02 related definitions and not just utility routines
declarations

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76x02_tx in mt76x02-lib module

Move mt76x02_tx shared routine in mt76x02-lib module and remove
duplicated code. Moreover remove mt76x0/tx.c since it is an empty
file

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x2: move mt76x2_dev in mt76x02_util.h

Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev
in order to be shared between mt76x2 and mt76x0 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x2: move mt76x2 source files to mt76x2 folder

Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and
leave just shared code in mt76 root folder

Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>